1 #############################################################################
3 # This is a configuration file for Privoxy-Regression-Test
4 # (included in the source tarball's tools directory and available at
5 # https://www.privoxy.org/gitweb/?p=privoxy.git;a=blob;f=tools/privoxy-regression-test.pl;hb=HEAD).
7 # After referencing it in your Privoxy configuration both Privoxy and
8 # Privoxy-Regression-Test should be good to go.
10 #############################################################################
12 # Copyright (c) 2007-2020 Fabian Keil <fk@fabiankeil.de>
14 # Permission to use, copy, modify, and distribute this software for any
15 # purpose with or without fee is hereby granted, provided that the above
16 # copyright notice and this permission notice appear in all copies.
18 # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
19 # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
21 # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
22 # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
23 # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
24 # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
26 #############################################################################
29 for-privoxy-version=3.0.29
31 # Some dependencies Privoxy-Regression-Test should know about:
33 # Level 9 needs = config line user-manual\s+(\.?\.?/|[A-Za-z]:)
34 # Level 12 needs = feature status FEATURE_CGI_EDIT_ACTIONS Yes
35 # Level 12 needs = config line enable-edit-actions\s+1
36 # Level 13 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE Yes
37 # Level 13 needs = config line keep-alive-timeout\s+(2[1-9]+|[3-9]\d+|1\d{2,})
38 # Level 14 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE No
39 # Level 15 needs = config line connection-sharing\s+0
40 # Level 16 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE Yes
41 # Level 16 needs = config line connection-sharing\s+1
42 # Level 17 needs = feature status FEATURE_64_BIT_TIME_T Yes
43 # Level 18 needs = feature status FEATURE_GRACEFUL_TERMINATION No
44 # Level 19 needs = feature status FEATURE_GRACEFUL_TERMINATION Yes
45 # Level 20 needs = config line enable-remote-toggle\s+1
46 # Level 21 needs = config line enable-remote-toggle\s+0
47 # Level 22 needs = config line enable-proxy-authentication-forwarding\s+0
48 # Level 23 needs = config line enable-proxy-authentication-forwarding\s+1
49 # Level 24 needs = feature status FEATURE_CLIENT_TAGS Yes
50 # Level 25 needs = feature status FEATURE_HTTPS_INSPECTION No
51 # Level 26 needs = feature status FEATURE_PCRE_HOST_PATTERNS Yes
53 #######################################################
54 # Enable taggers to activate the tests on demand
55 # and suppress hiding the User-Agent for
56 # Privoxy-Regression-Test to save log space.
57 #######################################################
59 +client-header-tagger{user-agent} \
60 +client-header-tagger{privoxy-control} \
61 +client-header-filter{privoxy-control} \
68 TAG:^User-Agent: Privoxy-Regression-Test
70 #######################################################
71 # Test accept-language{}.
72 #######################################################
74 {+hide-accept-language{en-gb}}
75 # Set Header = Accept-Language: de-de
76 # Expect Header = Accept-Language: en-gb
77 TAG:^hide-accept-language\{en-gb\}$
79 {+hide-accept-language{block}}
80 # Set Header = Accept-Language: de-de
81 # Expect Header = REMOVAL
82 TAG:^hide-accept-language\{block\}$
84 #######################################################
85 # Sections for hide-referrer{} to test:
87 # 1) conditional-block
88 # 2) conditional-forge
91 # 5) a parameter that looks like a valid fake referrer
92 # 6) a parameter that looks like an invalid fake referrer
93 #######################################################
95 {+hide-referrer{conditional-block}}
96 # Set Header = Referer: http://www.example.org/foo
97 # Expect Header = REMOVAL
99 # Set Header = Referer: http://p.p/foo
100 # Expect Header = NO CHANGE
102 # Set Header = Referer: p.p/
103 # Expect Header = REMOVAL
105 # Set Header = Referer: p
106 # Expect Header = REMOVAL
108 # Set Header = Referer: http://
109 # Expect Header = REMOVAL
111 # Set Header = Referer: https://p.p/
112 # Expect Header = REMOVAL
113 TAG:^hide-referrer\{conditional-block\}$
115 {+hide-referrer{conditional-forge}}
116 # Set Header = Referer: http://www.example.org/foo
117 # Expect Header = Referer: http://p.p/
119 # Set Header = Referer: http://p.p/foo
120 # Expect Header = NO CHANGE
122 # Set Header = Referer: p.p/
123 # Expect Header = Referer: http://p.p/
125 # Set Header = Referer: p
126 # Expect Header = Referer: http://p.p/
128 # Set Header = Referer: http://
129 # Expect Header = Referer: http://p.p/
131 # Set Header = Referer: https://p.p/
132 # Expect Header = Referer: http://p.p/
133 TAG:^hide-referrer\{conditional-forge\}$
135 {+hide-referrer{forge}}
136 # Set Header = Referer: http://www.example.org/foo
137 # Expect Header = Referer: http://p.p/
138 TAG:^hide-referrer\{forge\}$
140 {+hide-referrer{block}}
141 # Set Header = Referer: http://www.example.org/foo
142 # Expect Header = REMOVAL
143 TAG:^hide-referrer\{block\}$
145 {+hide-referrer{invalid}}
146 # Set Header = Referer: http://www.example.org/foo
147 # Expect Header = Referer: invalid
148 TAG:^hide-referrer\{invalid\}$
150 {+hide-referrer{http://www.privoxy.org/}}
151 # Set Header = Referer: http://www.example.org/asdf
152 # Expect Header = Referer: http://www.privoxy.org/
153 TAG:^hide-referrer\{http://www.privoxy.org/\}$
156 #TAG:^hide-referrer\{\}$
158 #######################################################
159 # Test hide-user-agent{}.
160 #######################################################
162 {+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD alpha; en-GB; rv:1.8.1.6) Gecko/20070913 Firefox/2.0.0.6}}
163 # Set Header = User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; de-CH; rv:1.8.1.6) Gecko/20070806 Firefox/2.0.0.6
164 # Expect Header = User-Agent: Mozilla/5.0 (X11; U; FreeBSD alpha; en-GB; rv:1.8.1.6) Gecko/20070913 Firefox/2.0.0.6
165 TAG:^hide-user-agent\{Mozilla/5\.0 \(X11; U; FreeBSD alpha; en-GB; rv:1\.8\.1\.6\) Gecko/20070913 Firefox/2\.0\.0\.6\}$
167 {+hide-user-agent{block}}
168 # XXX: Check the code that is tested here.
169 # Set Header = ua-blah: blah
170 # Expect Header = REMOVAL
171 TAG:^hide-user-agent{block}$
174 # Set Header = ua-blah: blah
175 # Expect Header = NO CHANGE
176 TAG:^-hide-user-agent{block}$
179 #######################################################
181 #######################################################
183 {+add-header{X-Custom-Header: yes, please}}
184 # Set Header = X-Whatever: foo
185 # Expect Header = X-Custom-Header: yes, please
186 TAG:^add-header\{X-Custom-Header: yes, please\}$
188 #######################################################
189 # Test client-header-filter{hide-tor-exit-notation}.
190 #######################################################
192 {+client-header-filter{hide-tor-exit-notation} -hide-referer}
193 # Set Header = Referer: http://p.p.zwiebelsuppe.exit/
194 # Expect Header = Referer: http://p.p/
196 # Set Header = Referer: http://p.p.zwiebelsuppe.exit/foo/bar/baaz/
197 # Expect Header = Referer: http://p.p/foo/bar/baaz/
199 # Set Header = Referer: http://p.p/
200 # Expect Header = NO CHANGE
202 # Set Header = Referer: http://config.privoxy.org.zwiebelsuppe.exit/foo/bar/baaz.html
203 # Expect Header = Referer: http://config.privoxy.org/foo/bar/baaz.html
205 # Set Header = Host: p.p.zwiebelsuppe.exit
206 # Expect Header = Host: p.p
208 # Set Header = Host: p.p
209 # Expect Header = NO CHANGE
211 # Set Header = Referer: http://config.privoxy.org.ad356ef8e87a89e6c898b74500d58607ac691178.exit/foo/baaz.html
212 # Expect Header = Referer: http://config.privoxy.org/foo/baaz.html
213 TAG:^client-header-filter\{hide-tor-exit-notation\}$
215 #######################################################
216 # Test client-header-filter{no-brotli-accepted}.
217 #######################################################
219 {+client-header-filter{no-brotli-accepted}}
220 # Set Header = Accept-Encoding: gzip, deflate, br
221 # Expect Header = Accept-Encoding: gzip, deflate
223 # Set Header = Accept-Encoding: gzip, br, deflate
224 # Expect Header = Accept-Encoding: gzip, deflate
226 # Set Header = Accept-Encoding: br, gzip, deflate
227 # Expect Header = Accept-Encoding: gzip, deflate
229 # Set Header = Accept-Encoding: br
230 # Expect Header = Accept-Encoding:
232 # Set Header = Accept-Encoding: gzip, deflate
233 # Expect Header = NO CHANGE
235 TAG:^client-header-filter\{no-brotli-accepted\}$
237 #######################################################
238 # Test crunch-client-header{}.
239 #######################################################
241 {+crunch-client-header{text/html}}
242 # Set Header = Content-Type: text/html
243 # Expect Header = REMOVAL
245 # Set Header = Content-Type: text/html; charset=4711
246 # Expect Header = REMOVAL
248 # Set Header = Content-Type: text/plain
249 # Expect Header = NO CHANGE
250 TAG:^crunch-client-header\{text/plain\}$
252 #######################################################
253 # Test crunch-if-none-match.
254 #######################################################
256 {+crunch-if-none-match -hide-if-modified-since}
257 # Set Header = If-None-Match: 8987afd239d2093kd2309kd
258 # Expect Header = REMOVAL
260 # Set Header = If-None-Match: 82c3cb50c984ef11b1fed749949b2a16
261 # Expect Header = REMOVAL
263 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
264 # Expect Header = NO CHANGE
265 TAG:^crunch-if-none-match$
267 #######################################################
268 # Test hide-if-modified-since
269 #######################################################
271 {+hide-if-modified-since{block} -crunch-if-none-match}
272 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
273 # Expect Header = REMOVAL
275 # Set Header = If-None-Match: 82c3cb50c984ef11b1fed749949b2a16
276 # Expect Header = NO CHANGE
277 TAG:^hide-if-modified-since\{block\}$
279 {+hide-if-modified-since{-60} -crunch-if-none-match}
280 # Set Header = If-Modified-Since: Gee, this date is invalid
281 # Expect Header = REMOVAL
283 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
284 # Expect Header = SOME CHANGE
285 # Set Header = If-Modified-Since: Thu, 04-Oct-07 09:56:35 GMT
286 # Expect Header = SOME CHANGE
287 # Set Header = If-Modified-Since: Thursday, 04-Oct-2007 09:56:35 GMT
288 # Expect Header = SOME CHANGE
289 # Set Header = If-Modified-Since: Thu, 04-Oct-2007 09:56:35 GMT
290 # Expect Header = SOME CHANGE
291 # Set Header = If-Modified-Since: Thursday Oct 04 09:56:35 2007 GMT
292 # Expect Header = SOME CHANGE
294 # Set Header = If-Modified-Since: Thu, 1 Jan 1970 00:00:00 GMT
295 # Expect Header = SOME CHANGE
297 # Set Header = If-Modified-Since: Thu, 01-Jan-70 00:00:00 GMT
298 # Expect Header = SOME CHANGE
300 # Set Header = If-Modified-Since: Thursday, 01-Jan-1970 00:00:00 GMT
301 # Expect Header = SOME CHANGE
303 # Set Header = If-Modified-Since: Thu, 01-Jan-1970 00:00:00 GMT
304 # Expect Header = SOME CHANGE
306 # Set Header = If-Modified-Since: Thursday Jan 01 00:00:00 1970 GMT
307 # Expect Header = SOME CHANGE
310 # Set Header = If-Modified-Since: Thu, 1 Jan 123456789 00:00:00 GMT
311 # Expect Header = REMOVAL
312 # Set Header = If-Modified-Since: Thu, 01-Jan-123456789 00:00:00 GMT
313 # Expect Header = REMOVAL
314 # Set Header = If-Modified-Since: Thursday, 01-Jan-123456789 00:00:00 GMT
315 # Expect Header = REMOVAL
316 # Set Header = If-Modified-Since: Thu, 01-Jan-123456789 00:00:00 GMT
317 # Expect Header = REMOVAL
318 # Set Header = If-Modified-Since: Thursday Jan 01 00:00:00 123456789 GMT
319 # Expect Header = REMOVAL
321 # Set Header = If-Modified-Since: Mon, 1 Jan 2525 00:00:00 GMT
322 # Expect Header = SOME CHANGE
324 # Set Header = If-Modified-Since: Mon, 01-Jan-25 00:00:00 GMT
325 # Expect Header = SOME CHANGE
327 # Set Header = If-Modified-Since: Monday, 01-Jan-2525 00:00:00 GMT
328 # Expect Header = SOME CHANGE
330 # Set Header = If-Modified-Since: Mon, 01-Jan-2525 00:00:00 GMT
331 # Expect Header = SOME CHANGE
333 # Set Header = If-Modified-Since: Monday Jan 01 00:00:00 2525 GMT
334 # Expect Header = SOME CHANGE
337 # Set Header = If-Modified-Since: Thu, 1 Jan 1970 02:00:00 GMT
338 # Expect Header = SOME CHANGE
339 # Set Header = If-Modified-Since: Thu, 01-Jan-70 02:00:00 GMT
340 # Expect Header = SOME CHANGE
341 # Set Header = If-Modified-Since: Thursday, 01-Jan-1970 02:00:00 GMT
342 # Expect Header = SOME CHANGE
343 # Set Header = If-Modified-Since: Thu, 01-Jan-1970 02:00:00 GMT
344 # Expect Header = SOME CHANGE
345 # Set Header = If-Modified-Since: Thursday Jan 01 02:00:00 1970 GMT
346 # Expect Header = SOME CHANGE
347 TAG:^hide-if-modified-since\{-60\}$
349 {+hide-if-modified-since{+60} -crunch-if-none-match}
350 # Set Header = If-Modified-Since: Gee, this date is invalid
351 # Expect Header = REMOVAL
352 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
353 # Expect Header = SOME CHANGE
354 # Set Header = If-Modified-Since: Wed, 31 Dec 1969 23:59:59 GMT
355 # Expect Header = SOME CHANGE
357 TAG:^hide-if-modified-since\{\+60\}$
359 {+hide-if-modified-since{60} -crunch-if-none-match}
360 # Set Header = If-Modified-Since: Gee, this date is invalid
361 # Expect Header = REMOVAL
362 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
363 # Expect Header = SOME CHANGE
364 TAG:^hide-if-modified-since\{60\}$
366 {+hide-if-modified-since{+0} -crunch-if-none-match}
367 # Set Header = If-Modified-Since: Gee, this date is invalid
368 # Expect Header = REMOVAL
369 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
370 # Expect Header = NO CHANGE
371 TAG:^hide-if-modified-since\{\+0\}$
373 {+hide-if-modified-since{-0} -crunch-if-none-match}
374 # Set Header = If-Modified-Since: Gee, this date is invalid
375 # Expect Header = REMOVAL
376 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
377 # Expect Header = NO CHANGE
378 TAG:^hide-if-modified-since\{-0\}$
380 {+hide-if-modified-since{0} -crunch-if-none-match}
381 # Set Header = If-Modified-Since: Gee, this date is invalid
382 # Expect Header = REMOVAL
383 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
384 # Expect Header = NO CHANGE
385 TAG:^hide-if-modified-since\{0\}$
387 {+hide-if-modified-since{NaN} -crunch-if-none-match}
388 # Set Header = If-Modified-Since: Gee, this date is invalid
389 # Expect Header = REMOVAL
390 # Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
391 # Expect Header = NO CHANGE
392 TAG:^hide-if-modified-since\{NaN\}$
395 #######################################################
396 # Test crunch-outgoing-cookies
397 #######################################################
400 +crunch-outgoing-cookies \
401 -crunch-incoming-cookies \
402 -limit-cookie-lifetime \
403 -session-cookies-only \
404 -hide-if-modified-since \
406 # Set Header = If-Modified-Since: Gee, this date is invalid
407 # Expect Header = NO CHANGE
409 # Set Header = Cookie: PREF=ID=6cf0abd34262:TM=117335617:LM=1617:S=jZypyJ7LPiwFi1_
410 # Expect Header = REMOVAL
411 TAG:^crunch-outgoing-cookies$
413 #######################################################
414 # Test session-cookies-only
416 # XXX: pretty useless as session-cookies-only doesn't
417 # affect client headers.
418 #######################################################
421 -crunch-outgoing-cookies \
422 -crunch-incoming-cookies \
423 -limit-cookie-lifetime \
424 +session-cookies-only \
425 -hide-if-modified-since \
427 # Set Header = Cookie: NSC_gffe-iuuq-mc-wtfswfs=8efb330d3660;expires=Thu, 04-Oct-07 19:11:34 GMT;path=/
428 # Expect Header = NO CHANGE
430 # Set Header = Cookie: PREF=ID=6cf0abd34262:TM=117335617:LM=1617:S=jZypyJ7LPiwFi1_
431 # Expect Header = NO CHANGE
432 TAG:^session-cookies-only$
434 #######################################################
435 # Test change-x-forwarded-for
436 #######################################################
439 -change-x-forwarded-for \
441 # Set Header = X-Forwarded-For: 10.0.0.1
442 # Expect Header = NO CHANGE
443 TAG:^-change-x-forwarded-for$
446 +change-x-forwarded-for{block} \
448 # Set Header = X-Forwarded-For: 10.0.0.1
449 # Expect Header = REMOVAL
450 TAG:^change-x-forwarded-for\{block\}$
453 +change-x-forwarded-for{add} \
455 # Set Header = X-Forwarded-For: 10.0.0.1
456 # Expect Header = SOME CHANGE
457 TAG:^change-x-forwarded-for\{add\}$
459 #######################################################
460 # Test hide-from-header
461 #######################################################
464 +hide-from-header{block}\
466 # Set Header = From: schneewitchen@example.org
467 # Expect Header = REMOVAL
468 TAG:^hide-from-header\{block\}$
471 +hide-from-header{siebenzwerge@example.org}\
473 # Set Header = From: schneewitchen@example.org
474 # Expect Header = From: siebenzwerge@example.org
475 TAG:^hide-from-header\{siebenzwerge@example.org\}$
477 #######################################################
478 # Test prevent-compression
479 #######################################################
482 +prevent-compression\
484 # Set Header = Accept-Encoding: gzip, deflate
485 # Expect Header = REMOVAL
487 # Set Header = Accept-Encoding: gzip
488 # Expect Header = REMOVAL
490 # Set Header = Accept-Encoding: deflate
491 # Expect Header = REMOVAL
492 TAG:^prevent-compression$
494 #######################################################
495 # Test content filters which could cause problems with
497 #######################################################
500 -client-header-tagger{range-requests} \
501 +deanimate-gifs{last} \
504 # Set Header = Range: bytes=1234-5678
505 # Expect Header = REMOVAL
506 # Set Header = Range: bytes=1-5
507 # Expect Header = REMOVAL
508 # Set Header = If-Range: bytes=1234-5678
509 # Expect Header = REMOVAL
510 # Set Header = Request-Range: bytes=1234-5678
511 # Expect Header = REMOVAL
512 # Set Header = Range: foo
513 # Expect Header = REMOVAL
514 # Set Header = If-Range: foo
515 # Expect Header = REMOVAL
516 # Set Header = Request-Range: foo
517 # Expect Header = REMOVAL
518 # Set Header = Range: bytes=0-5678
519 # Expect Header = NO CHANGE
520 # Set Header = Range: bytes=0-
521 # Expect Header = NO CHANGE
522 # Set Header = If-Range: bytes=0-5678
523 # Expect Header = NO CHANGE
524 # Set Header = If-Range: bytes=0-
525 # Expect Header = NO CHANGE
526 # Set Header = Request-Range: bytes=0-5678
527 # Expect Header = NO CHANGE
528 # Set Header = Request-Range: bytes=0-
529 # Expect Header = NO CHANGE
530 TAG:^deanimate-gifs\{last\}$
533 -client-header-tagger{range-requests} \
535 +filter{banners-by-size} \
537 # Set Header = Range: bytes=1234-5678
538 # Expect Header = REMOVAL
539 # Set Header = Range: bytes=1-5
540 # Expect Header = REMOVAL
541 # Set Header = If-Range: bytes=1234-5678
542 # Expect Header = REMOVAL
543 # Set Header = Request-Range: bytes=1234-5678
544 # Expect Header = REMOVAL
545 # Set Header = Range: bytes=1-5
546 # Expect Header = REMOVAL
547 # Set Header = If-Range: bytes=1234-5678
548 # Expect Header = REMOVAL
549 # Set Header = Request-Range: bytes=1234-5678
550 # Expect Header = REMOVAL
551 # Set Header = Range: foo
552 # Expect Header = REMOVAL
553 # Set Header = If-Range: foo
554 # Expect Header = REMOVAL
555 # Set Header = Request-Range: foo
556 # Expect Header = REMOVAL
557 # Set Header = Range: bytes=0-5678
558 # Expect Header = NO CHANGE
559 # Set Header = Range: bytes=0-
560 # Expect Header = NO CHANGE
561 # Set Header = If-Range: bytes=0-5678
562 # Expect Header = NO CHANGE
563 # Set Header = If-Range: bytes=0-
564 # Expect Header = NO CHANGE
565 # Set Header = Request-Range: bytes=0-5678
566 # Expect Header = NO CHANGE
567 # Set Header = Request-Range: bytes=0-
568 # Expect Header = NO CHANGE
569 TAG:^filter\{banners-by-size\}$
572 -client-header-tagger{range-requests} \
576 # Set Header = Range: bytes=1234-5678
577 # Expect Header = NO CHANGE
578 # Set Header = If-Range: bytes=1234-5678
579 # Expect Header = NO CHANGE
580 # Set Header = Request-Range: bytes=1234-5678
581 # Expect Header = NO CHANGE
582 TAG:^no-content-filter$
585 # Set Header = Connection: keep-alive
586 # Expect Header = NO CHANGE
588 # Set Header = Connection:
589 # Expect Header = REMOVAL
591 TAG:^Connection: keep-alive$
594 # Set Header = Connection: keep-alive
595 # Expect Header = Connection: close
597 # Set Header = Connection:
598 # Expect Header = Connection: close
600 TAG:^Connection: close$
603 # Set Header = Connection: close
604 # Expect Header = NO CHANGE
606 TAG:^connection-sharing disabled$
609 # Set Header = Connection: close
610 # Expect Header = REMOVAL
612 # Set Header = Connection: keep-alive
613 # Expect Header = NO CHANGE
615 TAG:^connection-sharing enabled$
618 # XXX: Removing a header by not specifying a value is
619 # an inherited curl feature and could be viewed as a
620 # bug as far as Privoxy-Regression-Test is concerned.
623 # Expect Header = Host: p.p
627 # Set Header = Host: whatever.example.org
628 # Expect Header = NO CHANGE
629 TAG:^Host header other than the target host$
632 # Set Header = Keep-Alive: 20
633 # Expect Header = NO CHANGE
635 # Set Header = Keep-Alive: timeout=20, max=3
636 # Expect Header = NO CHANGE
638 # Set Header = Keep-Alive: blah=fasel, timeout=20, max=3
639 # Expect Header = NO CHANGE
641 # Set Header = Keep-Alive: timeuot=20, max=3
642 # Expect Header = REMOVAL
644 # Set Header = Keep-Alive: twenty seconds please
645 # Expect Header = REMOVAL
647 TAG:^Parse Keep-Alive header$
650 # Set Header = Keep-Alive: 20
651 # Expect Header = REMOVAL
653 # Set Header = Keep-Alive: timeout=20, max=3
654 # Expect Header = REMOVAL
656 # Set Header = Keep-Alive: blah=fasel, timeout=20, max=3
657 # Expect Header = REMOVAL
659 TAG:^Keep-Alive header removal$
662 # XXX: check the RFC to use a real value
663 # Set Header = proxy-connection: keep-alive
664 # Expect Header = REMOVAL
665 TAG:^Proxy-Connection removal$
668 # Set Header = Proxy-Connection: keep-alive
669 # Expect Header = REMOVAL
670 TAG:^Proxy-Connection removal$
673 # These are somewhat redundant when testing with
674 # GET requests, but I want to remember then when
675 # TRACE requests are supported.
677 # Set Header = Max-Forwards: 0
678 # Expect Header = NO CHANGE
679 # Set Header = Max-Forwards: 1
680 # Expect Header = NO CHANGE
681 # Set Header = Max-Forwards: -1
682 # Expect Header = NO CHANGE
683 # Set Header = Max-Forwards: 3
684 # Expect Header = NO CHANGE
685 TAG:^Max-Forwards header without TRACE method$
688 # Set Header = Proxy-Authorization: blafaseldieda
689 # Expect Header = REMOVAL
691 TAG:^Proxy-Authorization header removal$
694 # Set Header = Proxy-Authorization: blafaseldieda
695 # Expect Header = Proxy-Authorization: blafaseldieda
697 TAG:^Proxy-Authorization header forwarding$
699 ################################################################
701 # Fairly dumb tests for Privoxy CGI pages.
703 # These are mainly useful for checking for memory leaks
704 # with Valgrind or whether or not the user manual is installed
707 # Note that if "Expect Status Code" is missing, 200 is implied.
709 ################################################################
711 # Fetch Test = http://p.p/
712 # Fetch Test = http://p.p/die
713 # Expect Status Code = 404
715 # Fetch Test = http://p.p/die
716 # Expect Status Code = 200
718 # Fetch Test = http://p.p/show-status
719 # Fetch Test = http://config.privoxy.org/show-status?file=actions&index=0
720 # Fetch Test = http://config.privoxy.org/show-status?file=filter&index=0
721 # XXX: for the invalid ones we probably shouldn't return status code 200.
722 # Fetch Test = http://config.privoxy.org/show-status?file=actions&index=100
723 # Fetch Test = http://config.privoxy.org/show-status?file=actions&index=NaN
724 # Fetch Test = http://config.privoxy.org/show-status?file=actions
725 # Fetch Test = http://config.privoxy.org/show-status?file=filter&index=100
726 # Fetch Test = http://config.privoxy.org/show-status?file=filter&index=NaN
727 # Fetch Test = http://config.privoxy.org/show-status?file=filter
728 # Fetch Test = http://config.privoxy.org/show-status?file=invalid
729 # Fetch Test = http://config.privoxy.org/show-status?file=trust
730 # Fetch Test = http://p.p/show-version
731 # Expect Status Code = 404
732 # Fetch Test = http://p.p/show-request
733 # Fetch Test = http://p.p/show-url-info
734 # Fetch Test = http://p.p/show-url-info?url=www.privoxy.org%2F
735 # Fetch Test = http://p.p/show-url-info?url=http:%2F%2Fwww.privoxy.org%2F
736 # Fetch Test = http://p.p/show-url-info?url=HTTp:%2F%2Fwww.privoxy.org%2F
737 # Fetch Test = http://p.p/show-url-info?url=https:%2F%2Fwww.privoxy.org%2F
738 # Fetch Test = http://p.p/show-url-info?url=HtTps:%2F%2Fwww.privoxy.org%2F
739 # Fetch Test = http://p.p/show-url-info?url=ftp:%2F%2Fwww.privoxy.org%2F
740 # Fetch Test = http://p.p/show-url-info?url=FTp:%2F%2Fwww.privoxy.org%2F
741 # Fetch Test = http://p.p/show-url-info?url=
742 # Fetch Test = http://p.p/show-url-info?url=%2F
743 # Depends on FEATURE_TOGGLE
744 # Fetch Test = http://p.p/toggle
746 # Fetch Test = http://p.p/toggle
747 # Expect Status Code = 403
749 # Fetch Test = http://p.p/edit-actions
750 # Expect Status Code = 403
752 # Fetch Test = http://p.p/eaa
753 # Expect Status Code = 403
755 # Fetch Test = http://p.p/eau
756 # Expect Status Code = 403
758 # Fetch Test = http://p.p/ear
759 # Expect Status Code = 403
761 # Fetch Test = http://p.p/eal
762 # Expect Status Code = 403
764 # Fetch Test = http://p.p/eafu
765 # Expect Status Code = 403
767 # Fetch Test = http://p.p/eas
768 # Expect Status Code = 403
770 # Fetch Test = http://p.p/easa
771 # Expect Status Code = 403
773 # Fetch Test = http://p.p/easr
774 # Expect Status Code = 403
776 # Fetch Test = http://p.p/eass
777 # Expect Status Code = 403
779 # Fetch Test = http://p.p/edit-actions-for-url
780 # Expect Status Code = 403
782 # Fetch Test = http://p.p/edit-actions-list
784 # Fetch Test = http://p.p/edit-actions-submit
785 # Expect Status Code = 403
787 # Expect Status Code = 403
788 # Fetch Test = http://p.p/edit-actions-url
789 # Expect Status Code = 403
791 # Fetch Test = http://p.p/edit-actions-url-form
792 # Expect Status Code = 403
794 # Fetch Test = http://p.p/edit-actions-add-url
795 # Expect Status Code = 403
797 # Fetch Test = http://p.p/edit-actions-add-url-form
798 # Expect Status Code = 403
800 # Fetch Test = http://p.p/edit-actions-remove-url
801 # Expect Status Code = 403
803 # Fetch Test = http://p.p/edit-actions-remove-url-form
804 # Expect Status Code = 403
806 # Fetch Test = http://p.p/edit-actions-section-add
807 # Expect Status Code = 403
809 # Fetch Test = http://p.p/edit-actions-section-remove
810 # Expect Status Code = 403
812 # Fetch Test = http://p.p/edit-actions-section-swap
813 # Expect Status Code = 403
815 # Fetch Test = http://p.p/error-favicon.ico
816 # Fetch Test = http://p.p/favicon.ico
817 # Fetch Test = http://p.p/robots.txt
818 # Fetch Test = http://p.p/send-banner
819 # Trusted CGI Request = http://p.p/send-stylesheet
820 # Fetch Test = http://p.p/send-stylesheet
821 # Expect Status Code = 403
822 # Fetch Test = http://p.p/t
823 # Fetch Test = http://p.p/url-info-osd.xml
824 # Fetch Test = http://p.p/client-tags
826 # Trusted CGI Request = http://p.p/toggle-client-tag
827 # Expect Status Code = 302
829 # Fetch Test = http://p.p/toggle-client-tag
830 # Expect Status Code = 403
833 # Trusted CGI Request = http://p.p/edit-actions
834 # Expect Status Code = 302
835 # Level = 12 # Depends on the CGI editor being enabled
836 # Fetch Test = http://p.p/does-not-exist
837 # Expect Status Code = 404
838 # Trusted CGI Request = http://p.p/eaa
840 # Trusted CGI Request = http://p.p/eau
842 # Trusted CGI Request = http://p.p/ear
844 # Trusted CGI Request = http://p.p/eal
846 # Trusted CGI Request = http://p.p/eafu
848 # Trusted CGI Request = http://p.p/eas
850 # Trusted CGI Request = http://p.p/easa
852 # Trusted CGI Request = http://p.p/easr
854 # Trusted CGI Request = http://p.p/eass
856 # Trusted CGI Request = http://p.p/edit-actions-for-url
858 # Trusted CGI Request = http://p.p/edit-actions-list
860 # Trusted CGI Request = http://p.p/edit-actions-submit
862 # Trusted CGI Request = http://p.p/edit-actions-url
864 # Trusted CGI Request = http://p.p/edit-actions-url-form
866 # Trusted CGI Request = http://p.p/edit-actions-add-url
868 # Trusted CGI Request = http://p.p/edit-actions-add-url-form
870 # Trusted CGI Request = http://p.p/edit-actions-remove-url
872 # Trusted CGI Request = http://p.p/edit-actions-remove-url-form
874 # Trusted CGI Request = http://p.p/edit-actions-section-add
876 # Trusted CGI Request = http://p.p/edit-actions-section-remove
878 # Trusted CGI Request = http://p.p/edit-actions-section-swap
880 # Trusted CGI Request = http://p.p/send-stylesheet
882 # The following tests depend on Privoxy being configured to deliver the user manual
884 # Fetch Test = http://p.p/user-manual
885 # Expect Status Code = 302
887 # Fetch Test = http://p.p/user-manual/
889 # Fetch Test = http://p.p/user-manual/actions-file.html
891 # Fetch Test = http://p.p/user-manual/appendix.html
893 # Fetch Test = http://p.p/user-manual/config.html
895 # Fetch Test = http://p.p/user-manual/configuration.html
897 # Fetch Test = http://p.p/user-manual/contact.html
899 # Fetch Test = http://p.p/user-manual/copyright.html
901 # Fetch Test = http://p.p/user-manual/files-in-use.jpg
903 # Fetch Test = http://p.p/user-manual/filter-file.html
905 # Fetch Test = http://p.p/user-manual/index.html
907 # Fetch Test = http://p.p/user-manual/installation.html
909 # Fetch Test = http://p.p/user-manual/introduction.html
911 # Fetch Test = http://p.p/user-manual/p_doc.css
913 # Fetch Test = http://p.p/user-manual/proxy2.jpg
915 # Fetch Test = http://p.p/user-manual/proxy_setup.jpg
917 # Fetch Test = http://p.p/user-manual/quickstart.html
919 # Fetch Test = http://p.p/user-manual/seealso.html
921 # Fetch Test = http://p.p/user-manual/startup.html
923 # Fetch Test = http://p.p/user-manual/templates.html
925 # Fetch Test = http://p.p/user-manual/whatsnew.html
929 # Method Test = OPTIONS
936 # Method Test = DELETE
937 # Method Test = OPTIONS
938 # Method Test = TRACE
939 # Method Test = CONNECT
941 # Method Test = PROPFIND
942 # Method Test = PROPPATCH
945 # Method Test = MKCOL
947 # Method Test = UNLOCK
948 # Method Test = BCOPY
949 # Method Test = BMOVE
950 # Method Test = BDELETE
951 # Method Test = BPROPFIND
952 # Method Test = BPROPPATCH
953 # Method Test = SUBSCRIBE
954 # Method Test = UNSUBSCRIBE
955 # Method Test = NOTIFY
957 # Method Test = VERSION-CONTROL
958 # Method Test = REPORT
959 # Method Test = CHECKOUT
960 # Method Test = CHECKIN
961 # Method Test = UNCHECKOUT
962 # Method Test = MKWORKSPACE
963 # Method Test = UPDATE
964 # Method Test = LABEL
965 # Method Test = MERGE
966 # Method Test = BASELINE-CONTROL
967 # Method Test = MKACTIVITY
968 # Method Test = PATCH
969 # Method Test = PRIVOXY-REGRESSION-TEST-IN-THE-HOUSE
970 # Expect Status Code = 400
972 {+block{Forbidden Port. You are not supposed to see this.}}
973 config.privoxy.org:1-/
977 config.privoxy.org:3,79-81/
980 {+forward-override{forward-socks5 127.0.0.1:12345 .}}
981 # Fetch Test = http://oh-dear-this-hostname-is-so-very-long-that-it-can-not-possibly-be-forwarded-through-socks5-as-a-result-we-therefore-expect-privoxy-to-return-an-error-response-instead-of-forwarding-the-request-because-as-already-mentioned-this-host-is-really-very-long.example
982 # Expect Status Code = 503
983 oh-dear-this-hostname-is-so-very-long-that-it-can-not-possibly-be-forwarded-through-socks5-as-a-result-we-therefore-expect-privoxy-to-return-an-error-response-instead-of-forwarding-the-request-because-as-already-mentioned-this-host-is-really-very-long.example/
985 {+forward-override{forward-socks5 127.0.0.1:12345 .}}
986 # Fetch Test = http://oh-dear-this-hostname-is-short-enough-but-there-is-no-socks5-server-listening.example
987 # Expect Status Code = 503
988 oh-dear-this-hostname-is-short-enough-but-there-is-no-socks5-server-listening.example
990 {+forward-override{forward-socks4 127.0.0.1:12345 .}}
991 # Fetch Test = http://oh-dear-this-hostname-is-short-enough-but-there-is-no-socks4-server-listening.example
992 # Expect Status Code = 503
993 oh-dear-this-hostname-is-short-enough-but-there-is-no-socks4-server-listening.example
995 {+forward-override{forward-socks4a 127.0.0.1:12345 .}}
996 # Fetch Test = http://oh-dear-this-hostname-is-short-enough-but-there-is-no-socks4a-server-listening.example
997 # Expect Status Code = 503
998 oh-dear-this-hostname-is-short-enough-but-there-is-no-socks4a-server-listening.example
1000 {+forward-override{forward-socks5 127.0.0.1:-1 127.0.0.1:12345}}
1001 # This one currently triggers the same error condition as the
1002 # test above (socks5 server unreachable), but once Privoxy
1003 # starts to properly reject invalid ports it should become useful.
1005 # Fetch Test = http://invalid-forward5-gateway-port.example
1006 # Expect Status Code = 503
1007 invalid-forward5-gateway-port.example
1009 {+forward-override{forward-socks5 :12345 127.0.0.1:12345}}
1010 # Fetch Test = http://forward5-null-gateway-host.example
1011 # Expect Status Code = 503
1012 forward5-null-gateway-host.example
1014 {+limit-connect{443}}
1015 # Fetch Test = http://www.forbidden-connect.example:444/
1017 # Expect Status Code = 403
1018 www.forbidden-connect.example/
1020 {+block{This request failed to make it to the target destination which means the test succeeded.}}
1021 # Fetch Test = http://www.blocked-request.example/blocked-request
1022 # Expect Status Code = 403
1023 www.blocked-request.example/blocked-request
1026 # Fetch Test = http://www.blocked-request.example/blocked-request-with-no-reason-specified
1027 # Expect Status Code = 403
1028 www.blocked-request.example/blocked-request-with-no-reason-specified
1030 # Some domain pattern tests
1032 {+block{domain pattern test}}
1033 # Blocked URL = http://domain-pattern-test.example/
1034 # Blocked URL = http://domain-pattern-test.example.org/
1035 domain-pattern-test.example.
1037 {+block{Hostname patterns without trailing dots cover hostnames with trailing dots as well.}}
1038 # Blocked URL = http://trailing-dot.example.org./
1039 # Blocked URL = http://trailing-dot.example.org./foo
1040 trailing-dot.example.org
1043 # Just in case there is no white-space fuzzer in the house ...
1045 # Set Header = X-LWS-Test: no superfluous white space here
1046 # Expect Header = NO CHANGE
1047 # Set Header = X-LWS-Test: superfluous white space in the house
1048 # Expect Header = X-LWS-Test: superfluous white space in the house
1049 # Set Header = X-LWS-Test : superfluous white space in the house
1050 # Expect Header = X-LWS-Test: superfluous white space in the house
1051 # Set Header = X-LWS-Test: :superfluous white space in the house
1052 # Expect Header = X-LWS-Test: :superfluous white space in the house
1053 # Set Header = X-LWS-Test: :no superfluous white space here
1054 # Expect Header = NO CHANGE
1055 # Set Header = X-LWS-Test: superfluous white tabs in the house
1056 # Expect Header = X-LWS-Test: superfluous white tabs in the house
1057 # Set Header = X-LWS-Test : superfluous white tabs in the house
1058 # Expect Header = X-LWS-Test: superfluous white tabs in the house
1059 # Set Header = X-LWS-Test: "leave quoted lws alone"
1060 # Expect Header = X-LWS-Test: "leave quoted lws alone"
1061 # Set Header = X-LWS-Test: "leave quoted lws alone" thxbye
1062 # Expect Header = X-LWS-Test: "leave quoted lws alone" thxbye
1063 # Set Header = X-LWS-Test: " Do I Look like quoted text? Me thinks not.
1064 # Expect Header = X-LWS-Test: " Do I Look like quoted text? Me thinks not.
1065 # Set Header = X-LWS-Test: "This is quoted" this is not "but this is again"
1066 # Expect Header = X-LWS-Test: "This is quoted" this is not "but this is again"
1067 # Set Header = X-LWS-Test: "This is quoted" this is not "this is " but " this again is not
1068 # Expect Header = X-LWS-Test: "This is quoted" this is not "this is " but " this again is not
1071 {+fast-redirects{check-decoded-url}}
1072 # Redirected URL = http://redirect.example.net/blafasel&url=http://redirected1.example.net/
1073 # Redirect Destination = http://redirected1.example.net/
1074 # Redirected URL = http://redirect.example.net/blafasel&url=http%3A%2F%2Fredirected2.example.net%2F¶meter=not-part-of-the-redirected-url
1075 # Redirect Destination = http://redirected2.example.net/
1076 # Redirected URL = http://redirect.example.net/blafasel&url=http%3A%2F%2Fredirected3.example.net%2F¶meter=not-part-of-the-redirected-url
1077 # Redirect Destination = http://redirected3.example.net/
1078 # Redirected URL = http://redirect.example.net/blafasel&url=http%3A%2F%2Fredirected4.example.net%2F%26parameter=part-of-the-redirected-url
1079 # Redirect Destination = http://redirected4.example.net/¶meter=part-of-the-redirected-url
1080 # Redirected URL = http://redirect.example.net/blafasel&url1=http%3A%2F%2Fredirected5.example.net%2F%26parameter1=part-of-the-redirected-url&url2=http%3A%2F%2Fredirected5.example.net%2F%26parameter2=part-of-the-redirected-url2
1081 # Redirect Destination = http://redirected5.example.net/¶meter2=part-of-the-redirected-url2
1082 # Redirected URL = http://redirect.example.net/blafasel&url1=http%3A%2F%2Fredirected6.example.net%2F%26parameter1=part-of-the-redirected-url&url2=http%3A%2F%2Fredirected6.example.net%2F%26parameter2=part-of-the-redirected-url2¶meter3=not-part-of-the-redirected-url2
1083 # Redirect Destination = http://redirected6.example.net/¶meter2=part-of-the-redirected-url2
1084 # Redirected URL = http://redirect.example.net/blafasel?x=http%3A%2F%2Fredirected7.example.net%2F%26parameter1=part-of-the-redirected-url1¶meter2=not-part-of-the-redirected-url1
1085 # Redirect Destination = http://redirected7.example.net/¶meter1=part-of-the-redirected-url1
1086 # Redirected URL = http://redirect.example.net/blafasel?x=http%3A%2F%2Fredirected8.example.net%2F%26parameter1=part-of-the-redirected-url1¶meter2=not-part-of-the-redirected-url1¶meter3=not-part-of-the-redirected-url1
1087 # Redirect Destination = http://redirected8.example.net/¶meter1=part-of-the-redirected-url1
1088 # Redirected URL = http://redirect.example.net/blafasel?a?b?c?d?e?f?g?h?i?j?k?l?m?n?o?p?q?r?s&t&u&v&w&x&y&z&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15&16x=http%3A%2F%2Fredirected8.example.net%2F%26parameter1=part-of-the-redirected-url1¶meter2=not-part-of-the-redirected-url1¶meter3=not-part-of-the-redirected-url1
1089 # Redirect Destination = http://redirected8.example.net/¶meter1=part-of-the-redirected-url1
1090 # Redirected URL = http://redirect.example.net/blafasel???????????????????????????????=http%3A%2F%2Fredirected8.example.net%2F%26parameter1=part-of-the-redirected-url1¶meter2=not-part-of-the-redirected-url1¶meter3=not-part-of-the-redirected-url1
1091 # Redirect Destination = http://redirected8.example.net/¶meter1=part-of-the-redirected-url1
1092 # Redirected URL = http://redirect.example.net/blafasel&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&=http%3A%2F%2Fredirected8.example.net%2F%26parameter1=part-of-the-redirected-url1¶meter2=not-part-of-the-redirected-url1¶meter3=not-part-of-the-redirected-url1
1093 # Redirect Destination = http://redirected8.example.net/¶meter1=part-of-the-redirected-url1
1094 redirect.example.net/
1095 # Redirected URL = http://redirect.example.net/blafaselhttp://redirect1.example.net/http://redirect2.example.net/
1096 # Redirect Destination = http://redirect2.example.net/
1097 # Redirected URL = http://redirect.example.net/blafasel%3A%2F%2Fredirect1.example.net/http://redirect2.example.net/
1098 # Redirect Destination = http://redirect2.example.net/
1099 # Redirected URL = http://redirect.example.net/blafaselhttp://redirect1.example.net/http%3A%2F%2Fredirect2.example.net/
1100 # Redirect Destination = http://redirect2.example.net/
1101 # These tests verify that Privoxy behaves as intended,
1102 # given that the encoded redirect URLs are invalid,
1103 # there are no correct redirect URLs.
1104 # Redirected URL = http://redirect.example.net/%%%%%%%%%%%%%%%%%%%%%%blafaselhttp://redirect1.example.net/http%3A%2F%2Fredirect2.example.net/%%%%%%%%%%%%%%
1105 # Redirect Destination = http://redirect2.example.net/%%%%%%%%%%%%%%
1106 # Redirected URL = http://redirect.example.net/%%%%%%%%%%%%%%%%%%%%%%blafaselhttp://redirect1.example.net/http%3A%2F%2Fredirect2.example.net/%1%2%%3%4%5%6%7%8%9%0%0%%
1107 # Redirect Destination = http://redirect2.example.net/%1%2%%3%4%5%6%7%8%9%0%0%%
1109 {+fast-redirects{simple-check}}
1110 # Redirected URL = http://redirect2.example.net/blafasel?x=http://redirected.example.net/¶meter1=part-of-the-redirected-url1¶meter2=part-of-the-redirected-url1
1111 # Redirect Destination = http://redirected.example.net/¶meter1=part-of-the-redirected-url1¶meter2=part-of-the-redirected-url1
1112 redirect2.example.net/
1114 {+delay-response{1}}
1115 # Fetch Test = http://config.privoxy.org/show-url-info?url=http%3A%2F%2Fwww.example.com%2Fprivoxy-test-delay-response
1116 config.privoxy.org/show-url-info\?url=http%3A%2F%2Fwww\.example\.com%2Fprivoxy-test-delay-response
1118 {+block{Block with pcre host pattern}}
1119 # Blocked URL = http://aaa.example.org/
1121 PCRE-HOST-PATTERN:^a{3}\.example\.org$
1122 # Blocked URL = http://bbb.example.org/
1124 PCRE-HOST-PATTERN:^(bbb|ccc|ddd)\.example\.org$