-# $Id: junkbuster-rh.spec,v 1.43 2002/03/21 16:04:10 hal9 Exp $
+# $Id: junkbusterng-rh.spec,v 1.1 2002/03/22 20:53:03 morcego Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# IJBSWA team. http://ijbswa.sourceforge.net
junkbuster.init was modified. It now starts junkbuster with an
additional "-r @" flag.
-# $Log: junkbuster-rh.spec,v $
+# $Log: junkbusterng-rh.spec,v $
+# Revision 1.1 2002/03/22 20:53:03 morcego
+# - Ongoing process to change name to JunkbusterNG
+# - configure/configure.in: no change needed
+# - GNUmakefile.in:
+# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
+# - PROGRAM = jbng@EXEEXT@
+# - rh-spec now references as junkbusterng-rh.spec
+# - redhat-upload: references changed to junkbusterng-* (package names)
+# - tarball-dist: references changed to JunkbusterNG-distribution-*
+# - tarball-src: now JunkbusterNG-*
+# - install: initscript now junkbusterng.init and junkbusterng (when
+# installed)
+# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
+# - junkbusterng.spec:
+# - References to the expression ijb where changed where possible
+# - New package name: junkbusterng (all in lower case, acording to
+# the LSB recomendation)
+# - Version changed to: 2.9.13
+# - Release: 1
+# - Added: junkbuster to obsoletes and conflicts (Not sure this is
+# right. If it obsoletes, why conflict ? Have to check it later)
+# - Summary changed: Stefan, please check and aprove it
+# - Changes description to use the new name
+# - Sed string was NOT changed. Have to wait to the manpage to
+# change first
+# - Keeping the user junkbuster for now. It will require some aditional
+# changes on the script (scheduled for the next specfile release)
+# - Added post entry to move the old logfile to the new log directory
+# - Removing "chkconfig --add" entry (not good to have it automaticaly
+# added to the startup list).
+# - Added preun section to stop the service with the old name, as well
+# as remove it from the startup list
+# - Removed the chkconfig --del entry from the conditional block on
+# the preun scriptlet (now handled on the %files section)
+# - junkbuster.init: renamed to junkbusterng.init
+# - junkbusterng.init:
+# - Changed JB_BIN to jbng
+# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
+# be used where necessary (config dir)
+#
+# Aditional notes:
+# - The config directory is /etc/junkbuster yet. Have to change it on the
+# specfile, after it is changes on the code
+# - The only files that got renamed on the cvs tree were the rh specfile and
+# the init file. Some file references got changes on the makefile and on the
+# rh-spec (as listed above)
+#
# Revision 1.43 2002/03/21 16:04:10 hal9
# added ijb_docs.css to %doc
#
-# $Id: junkbuster-suse.spec,v 1.20 2002/03/12 13:42:14 sarantis Exp $
+# $Id: junkbuster-suse.spec,v 1.21 2002/03/21 16:04:33 hal9 Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# IJBSWA team. http://ijbswa.sourceforge.net
Name: junkbuster-suse
Distribution: defineme
Version: 2.9.11
-Release: 1
+Release: 3
Source: http://www.waldherr.org/%{name}/ijbswa-%{version}.tar.gz
# not sure if this works
BuildRoot: %{_tmppath}/%{name}-%{version}-root
- new package: version 2.0
# $Log: junkbuster-suse.spec,v $
+# Revision 1.21 2002/03/21 16:04:33 hal9
+# added ijb_docs.css to %%doc
+#
# Revision 1.20 2002/03/12 13:42:14 sarantis
# remove hardcoded "ijbswa" from build phase
#
#!/bin/sh
# ********************************************************************
#
-# File : $Source: /cvsroot/ijbswa/current/junkbuster.init,v $
+# File : $Source: /cvsroot/ijbswa/current/junkbusterng.init,v $
#
# Purpose : This shell script takes care of starting and stopping
# junkbuster.
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# Revisions :
-# $Log: junkbuster.init,v $
+# $Log: junkbusterng.init,v $
+# Revision 1.1 2002/03/22 20:53:03 morcego
+# - Ongoing process to change name to JunkbusterNG
+# - configure/configure.in: no change needed
+# - GNUmakefile.in:
+# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
+# - PROGRAM = jbng@EXEEXT@
+# - rh-spec now references as junkbusterng-rh.spec
+# - redhat-upload: references changed to junkbusterng-* (package names)
+# - tarball-dist: references changed to JunkbusterNG-distribution-*
+# - tarball-src: now JunkbusterNG-*
+# - install: initscript now junkbusterng.init and junkbusterng (when
+# installed)
+# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
+# - junkbusterng.spec:
+# - References to the expression ijb where changed where possible
+# - New package name: junkbusterng (all in lower case, acording to
+# the LSB recomendation)
+# - Version changed to: 2.9.13
+# - Release: 1
+# - Added: junkbuster to obsoletes and conflicts (Not sure this is
+# right. If it obsoletes, why conflict ? Have to check it later)
+# - Summary changed: Stefan, please check and aprove it
+# - Changes description to use the new name
+# - Sed string was NOT changed. Have to wait to the manpage to
+# change first
+# - Keeping the user junkbuster for now. It will require some aditional
+# changes on the script (scheduled for the next specfile release)
+# - Added post entry to move the old logfile to the new log directory
+# - Removing "chkconfig --add" entry (not good to have it automaticaly
+# added to the startup list).
+# - Added preun section to stop the service with the old name, as well
+# as remove it from the startup list
+# - Removed the chkconfig --del entry from the conditional block on
+# the preun scriptlet (now handled on the %files section)
+# - junkbuster.init: renamed to junkbusterng.init
+# - junkbusterng.init:
+# - Changed JB_BIN to jbng
+# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
+# be used where necessary (config dir)
+#
+# Aditional notes:
+# - The config directory is /etc/junkbuster yet. Have to change it on the
+# specfile, after it is changes on the code
+# - The only files that got renamed on the cvs tree were the rh specfile and
+# the init file. Some file references got changes on the makefile and on the
+# rh-spec (as listed above)
+#
# Revision 1.15 2002/03/09 15:05:58 swa
# wrong user.group
#
#
# Revisions :
# $Log: junkbuster.init.suse,v $
+# Revision 1.7 2002/03/11 11:44:46 oes
+# Working in suggestions by Thorsten Kukuk <kukuk@suse.de>
+#
# Revision 1.6 2002/03/09 14:56:34 swa
# wrong user.group
#
#
# Revisions :
# $Log: junkbuster.logrotate,v $
+# Revision 1.7 2001/12/30 14:07:32 steudten
+# - Add signal handling (unix)
+# - Add SIGHUP handler (unix)
+# - Add creation of pidfile (unix)
+# - Add action 'top' in rc file (RH)
+# - Add entry 'SIGNALS' to manpage
+# - Add exit message to logfile (unix)
+#
# Revision 1.6 2001/12/13 23:19:43 steudten
# Add 'restart' of junkbuster service after rotate logfiles.
# Better we could use the well known 'kill -HUP', but the handler
# ********************************************************************
#
-# File : $Source: /cvsroot/ijbswa/current/gateway.h,v $
+# File : $Source: /cvsroot/ijbswa/current/junkbuster.monthly,v $
#
# Purpose : Downloads updated configuration (blocklists, ...)
# to the machine.
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# Revisions :
-# $Log: gateway.h,v $
+# $Log: junkbuster.monthly,v $
+# Revision 1.3 2001/05/24 07:41:33 swa
+# added header
+#
#
#
# ********************************************************************/
# ********************************************************************
#
-# File : $Source: /cvsroot/ijbswa/current/junkbuster.monthly,v $
+# File : $Source: /cvsroot/ijbswa/current/junkbuster.weekly,v $
#
# Purpose : Downloads updated configuration (blocklists, ...)
# to the machine.
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# Revisions :
-# $Log: junkbuster.monthly,v $
+# $Log: junkbuster.weekly,v $
+# Revision 1.2 2001/05/24 07:52:24 swa
+# added header. removed ^M.
+#
# Revision 1.3 2001/05/24 07:41:33 swa
# added header
#