1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.132 2002/10/24 22:24:58 hal9 Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
47 SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
50 #############################################################################
52 #############################################################################
54 DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src
55 DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre
56 DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
58 #############################################################################
59 # "make install" settings
60 #############################################################################
62 # User and Group settings
66 # PATHS set from configure
68 exec_prefix = @exec_prefix@
69 CONF_BASE = @sysconfdir@
72 MAN_DEST = $(MAN_DIR)/man1
73 SHARE_DEST = @datadir@
74 DOC_DEST = $(SHARE_DEST)/doc/privoxy
75 VAR_DEST = @localstatedir@
76 LOGS_DEST = $(VAR_DEST)/log/privoxy
77 PIDS_DEST = $(VAR_DEST)/run
79 # if $prefix = /usr/local then the default CONFDEST change from
80 # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
81 # by the target rule CONF_DEST
83 # also if the $prefix is /usr/local and there is no
84 # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
85 # instead in this situation
87 # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
88 # changes this to /var for storing the logs and pidfile
90 # Where to find docs. The install goes to $share_dest/doc/privoxy.
91 DOK_WEB = doc/webserver/
93 # Install usage should be compatible with install-sh.
96 # Permissions used during installation.
97 # Binaries (daemon, init scripts)
99 # Files daemon writes to: *action, trust and logs.
101 # Misc files, docs, etc.
106 INSTALL_P = -m $(BIN_MODE)
107 INSTALL_T = -m $(RA_MODE)
108 INSTALL_D = -m $(DIR_MODE) -d
109 INSTALL_R = -m $(RWD_MODE)
110 # install options for superuser install
113 #############################################################################
114 # Build and Install tools
115 #############################################################################
117 PROGRAM = privoxy@EXEEXT@
121 # id -u is not universal. FIXME: need to set from configure. Breaks on
128 MKDIR = ./mkinstalldirs
144 DOC_STATUS = @DOC_STATUS@
145 # Note: Please make sure that -d ldp.dsl\#html stays the last option to
146 # $(JADEBIN), because for some targets "-notoc" will be appended
147 # to it (--> "ldp.dsl\#html-notoc").
152 # Program to do LF->CRLF
154 # The sed version should be the most portable, but it doesn't work for me,
155 # the other two do. FIXME.
157 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
158 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
159 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
160 CVSROOT = :pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa
161 TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
163 #############################################################################
164 # Setup for make distribution rh and suse for now
165 #############################################################################
167 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
168 RPM_BASE = @RPM_BASE@
170 #############################################################################
171 # We include these files in our distributions
172 #############################################################################
173 CONFIGS = config trust default.action standard.action user.action default.filter
174 # take care that no CVS .cvsignore or other crappy files
176 # and escape every '#' in the find. doh.
177 CONFIG_FILES = $(CONFIGS) \
178 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
180 DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
181 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
182 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
183 `find doc/webserver/ -name "*.css"` \
186 #############################################################################
187 # Filenames and libraries
188 #############################################################################
191 $(DIR_PRIVOXY_SRC)/actions.c \
192 $(DIR_PRIVOXY_SRC)/cgi.c \
193 $(DIR_PRIVOXY_SRC)/cgiedit.c \
194 $(DIR_PRIVOXY_SRC)/cgisimple.c \
195 $(DIR_PRIVOXY_SRC)/deanimate.c \
196 $(DIR_PRIVOXY_SRC)/encode.c \
197 $(DIR_PRIVOXY_SRC)/errlog.c \
198 $(DIR_PRIVOXY_SRC)/filters.c \
199 $(DIR_PRIVOXY_SRC)/gateway.c \
200 $(DIR_PRIVOXY_SRC)/jbsockets.c \
201 $(DIR_PRIVOXY_SRC)/jcc.c \
202 $(DIR_PRIVOXY_SRC)/killpopup.c \
203 $(DIR_PRIVOXY_SRC)/list.c \
204 $(DIR_PRIVOXY_SRC)/loadcfg.c \
205 $(DIR_PRIVOXY_SRC)/loaders.c \
206 $(DIR_PRIVOXY_SRC)/miscutil.c \
207 $(DIR_PRIVOXY_SRC)/parsers.c \
208 $(DIR_PRIVOXY_SRC)/ssplit.c \
209 $(DIR_PRIVOXY_SRC)/urlmatch.c
211 C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
212 C_HDRS = $(C_SRC:.c=.h) $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/actionlist.h
214 W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c
215 W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res
216 W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES)
217 W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h
218 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
219 W32_INIS = @WIN_ONLY@config.txt trust.txt
221 PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c
222 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
223 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
225 PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c
226 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
227 PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
229 # No REGEX (maybe because dynamically linked pcreposix):
231 @STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c
233 REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
234 REGEX_HDRS = $(REGEX_SRC:.c=.h)
236 # Dependencies introduced by #include "project.h".
237 PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h
239 # Socket libraries for platforms that need them explicitly defined
240 SOCKET_LIB = @SOCKET_LIB@
242 # PThreads library, if needed.
243 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
245 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
246 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
247 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
248 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
251 #############################################################################
253 #############################################################################
255 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
256 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
258 # The flag "-pthread" is required if using Pthreads under Linux (and
259 # possibly other OSs).
260 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
262 # Add your flags here
265 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
266 @STATIC_PCRE_ONLY@ -Ipcre
268 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
271 #############################################################################
274 # There should NOT be any targets above this line.
275 #############################################################################
276 all: $(PROGRAM) default.action
279 #############################################################################
281 #############################################################################
282 .PHONY: all inifiles redhat-dist redhat-upload redhat-test solaris-dist suse-dist \
283 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
284 install conectiva-spec conectiva-dist conectiva-upload debian-dist \
285 debian-upload ensure-wdump ensure-jadebin ensure-dkprefix CONF_DEST LOG_DEST \
286 PID_DEST check_doc install-strip uninstall GROUP_T
289 #############################################################################
291 #############################################################################
292 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ)
293 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
295 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ)
296 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
299 $(CHMOD) $(DIR_MODE) $(MKDIR)
302 #############################################################################
303 # Strip master copy comments from default.action:
304 #############################################################################
305 default.action: default.action.master
306 $(GREP) -v '^#MASTER#' $< > $@
308 #############################################################################
310 #############################################################################
312 inifiles: $(W32_INIS)
315 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
316 -e 's!\jarfile jarfile!jarfile jar.log!' \
317 -e 's!\logfile logfile!logfile privoxy.log!' \
318 -e 's!#Win32-only: !!' \
321 # LF to CRLF in default.action
322 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
323 # LF to CRLF in default.filter
324 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
327 $(DOSFILTER) < $< > $@
329 #############################################################################
331 #############################################################################
333 @if [ -d CVS ]; then \
334 $(ECHO) "***************************************************"; \
336 $(ECHO) "*** WARNING ***"; \
338 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
339 $(ECHO) "*** that you are trying to build a distribution ***"; \
340 $(ECHO) "*** package based on a checked out, not an ***"; \
341 $(ECHO) "*** exported copy of the source tree. Please ***"; \
342 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
343 $(ECHO) "*** developer manual. ***"; \
345 $(ECHO) "***************************************************"; \
346 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
347 $(ECHO) -n "really want to proceed: "; \
349 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
352 #############################################################################
353 # create tar.gz from CVS:
354 # This make-target is usually called through 'create-archive'. If you
355 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
356 # tar.gz with the current date in the name and as a releasenumber in the
357 # spec-file. But the main usage is to run it as follows (Red Hat example):
358 # make SNAPVERSION=1.6x create-snapshot
359 # This creates a tar.gz and spec-file for a Red Hat 6.x version.
360 #############################################################################
362 @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
363 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
364 echo "*** Creating package from $$tag!"; \
365 cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."
366 @cd $(TMPDIR)/current; \
367 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
368 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
369 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
370 privoxy-rh.spec > $$TMPFILE ; then \
371 $(MV) -f $$TMPFILE privoxy-rh.spec; \
373 $(ECHO) "Could not set version info in specfile."; \
376 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
377 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
378 privoxy-suse.spec > $$TMPFILE ; then \
379 $(MV) -f $$TMPFILE privoxy-suse.spec; \
381 $(ECHO) "Could not set version info in specfile."; \
385 cd $(TMPDIR)/current; \
386 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
387 "privoxy-suse.spec" -czf $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .; \
388 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
389 "privoxy-rh.spec" -czf $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
390 @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .
391 @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
393 @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and"
394 @echo " $(PROGRAM)-suse-$(VERSION).tar.gz"
397 #############################################################################
398 # looks at the version of Makefile and exports a corresponding source-tree
399 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
400 # privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
401 # Red Hat and one for SuSe (different spec-files)
402 #############################################################################
404 make SNAPVERSION=$(SNAPVERSION) create-snapshot
407 #############################################################################
408 # RPM specific stuff (SuSE or Redhat, ..)
409 #############################################################################
410 rpm-stuff: dist-check clean clobber
411 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
412 if [ ! -w $(RPM_BASE)/$$dir ]; then \
413 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
414 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
415 $(ECHO) "%_topdir /home/foo/rpm-build"; \
421 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
423 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
424 echo " No value given for RPM_PACKAGEV. Please use:"; \
425 echo " make dist-upload RPM_PACKAGEV=release"; \
426 echo " where \"release\" is the release number you want to and"; \
427 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
429 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
431 echo "ATTENTION: If your distribution use a specific tag on the"; \
432 echo " release field (like \"cl\" for Conectiva, and"; \
433 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
434 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
435 echo " Do it like you would do for a redhat package,"; \
436 echo " (i.e. just the number)."; \
442 #############################################################################
443 # Create Conectiva specfile from RedHat specfile
444 #############################################################################
446 $(RM) privoxy-cl.spec
447 chmod a+x genclspec.sh
450 #############################################################################
451 # Conectiva distribution for x86
452 #############################################################################
453 conectiva-dist: rpm-stuff conectiva-spec
455 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
456 $(RPM) --clean -ta $(TAR_ARCH)
457 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
459 conectiva-upload: check-release
460 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
462 #############################################################################
463 # redhat distribution alpha and x86
464 #############################################################################
465 redhat-dist: rpm-stuff
467 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
468 $(RPMBUILD) --clean -ta $(TAR_ARCH)
469 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
471 # For testing build issues only! Use redhat-dist for official releases.
474 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
475 $(RPMBUILD) --clean -tb $(TAR_ARCH)
476 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
477 @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
479 # anonymously ncftps the rpms to sourceforge
480 redhat-upload: check-release
481 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
482 # better should use `arch` here instead of ix86 to support other platforms too
483 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
484 @$(ECHO) -------------------------------------------------------
486 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
487 @$(ECHO) ... and release the files.
488 @$(ECHO) -------------------------------------------------------
489 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
491 #############################################################################
492 # suse distribution. works fine. no need to be root.
493 #############################################################################
495 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
496 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
497 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
498 # privoxy-suse.spec > $$TMPFILE ; then \
499 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
501 # $(ECHO) "Could not set version info in specfile."; \
505 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
506 $(RPM) --clean -ta $(TAR_ARCH)
507 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
509 # anonymously ncftps the rpms to sourceforge
510 suse-upload: check-release
511 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
512 # better should use `arch` here instead of ix86 to support other platforms too
513 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
514 @$(ECHO) -------------------------------------------------------
516 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
517 @$(ECHO) ... and release the files.
518 @$(ECHO) -------------------------------------------------------
520 # handle with care. use with root.
522 $(RPM) -e junkbuster-suse || true
523 $(RM) -r /etc/junkbuster
524 $(RM) -r /etc/rc.d/junkbuster*
525 $(RM) -r /var/run/junkbuster.pid
526 $(RM) -r /var/log/junkbuster
527 $(RM) /etc/init.d/junkbuster
528 $(RM) /usr/sbin/junkbuster
529 $(RM) /usr/sbin/rcjunkbuster
530 $(RM) /usr/share/man/man1/junkbuster.1.gz
531 $(RPM) -e privoxy-suse || true
532 $(RM) -r /etc/privoxy
533 $(RM) -r /etc/rc.d/privoxy*
534 $(RM) -r /var/run/privoxy.pid
535 $(RM) -r /var/log/privoxy
536 $(RM) /etc/init.d/privoxy
537 $(RM) /usr/sbin/privoxy
538 $(RM) /usr/sbin/rcprivoxy
539 $(RM) /usr/share/man/man1/privoxy.1.gz
542 #############################################################################
543 # generic distribution
544 #############################################################################
547 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
550 $(STRIP_PROG) $(PROGRAM)
551 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
553 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
555 for foo in $(CONFIG_FILES); do \
556 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
559 for foo in $(DOC_FILES); do \
560 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
562 # and zip the archive
563 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
564 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
565 @$(ECHO) Distribution with binary created.
567 # anonymously ncftps the package to sourceforge
569 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
570 @$(ECHO) -------------------------------------------------------
572 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
573 @$(ECHO) ... and release the files.
574 @$(ECHO) -------------------------------------------------------
578 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
580 #############################################################################
581 # solaris distribution. verified on SF machines by swa.
582 #############################################################################
583 solaris-dist: gen-dist
585 # anonymously ncftps the package to sourceforge
586 solaris-upload: gen-upload
589 solaris-clean: gen-clean
592 #############################################################################
594 #############################################################################
596 @$(ECHO) coming soon.
598 @$(ECHO) coming soon.
600 #############################################################################
601 # debian distribution
602 #############################################################################
604 @$(ECHO) Creating Debian package. Will exist in parent directory.
605 dpkg-buildpackage -rfakeroot -us -uc
607 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb
608 @$(ECHO) -------------------------------------------------------
610 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
611 @$(ECHO) ... and release the files.
612 @$(ECHO) -------------------------------------------------------
615 #############################################################################
616 # macosx distribution
617 #############################################################################
619 @$(ECHO) coming soon.
621 @$(ECHO) coming soon.
623 #############################################################################
625 #############################################################################
627 @$(ECHO) coming soon.
629 @$(ECHO) coming soon.
631 #############################################################################
632 # freebsd distribution. verified on SF machines by swa.
633 #############################################################################
634 freebsd-dist: gen-dist
636 # anonymously ncftps the package to sourceforge
637 freebsd-upload: gen-upload
640 freebsd-clean: gen-clean
643 #############################################################################
644 # Windows distribution
645 #############################################################################
647 @$(ECHO) RTFM. You shouldn't run configure before making
648 @$(ECHO) the Windows release, so you need to start again from
649 @$(ECHO) a clean CVS export.
653 #############################################################################
654 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
655 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
656 #############################################################################
658 tarball-dist: dist-check clean clobber
659 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
661 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
662 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
663 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
665 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
667 # and zip the archive
668 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
669 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
670 @$(ECHO) Tarball distribution created.
672 # anonymously ncftps the tarball to sourceforge
674 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
675 @$(ECHO) -------------------------------------------------------
677 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
678 @$(ECHO) ... and release the files.
679 @$(ECHO) -------------------------------------------------------
682 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
684 #############################################################################
688 # converts doc/source/*.sgml into html, text and man pages
690 #############################################################################
694 cd $(DOC_DIR) && $(MAKE)
696 #############################################################################
700 # moves dokumentation to webserver
702 #############################################################################
704 @$(ECHO) -------------------------------------------------------
705 @$(ECHO) You have run make dok/redhat-dok before, right?
706 @$(ECHO) Note that this command scps all stuff to the webserver,
707 @$(ECHO) it will not remove obsolete documents.
708 @$(ECHO) -------------------------------------------------------
710 @$(ECHO) Uploading html
712 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
713 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
715 @$(ECHO) Uploading pdf
717 zip privoxy-pdf-docs *.pdf ;\
718 scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf
720 @$(ECHO) Fixing permissions
721 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
722 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
723 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
728 @cd doc/webserver/actions; \
729 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
730 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
732 @$(ECHO) Fixing permissions
733 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
734 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
736 #############################################################################
737 # Source file dependencies
738 #############################################################################
740 $(DIR_PRIVOXY_OBJ)/actions.@OBJEXT@: $(DIR_PRIVOXY_SRC)/actions.c $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/actionlist.h
741 $(DIR_PRIVOXY_OBJ)/cgi.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgi.c $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
742 $(DIR_PRIVOXY_OBJ)/cgiedit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgiedit.c $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
743 $(DIR_PRIVOXY_OBJ)/cgisimple.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgisimple.c $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
744 $(DIR_PRIVOXY_OBJ)/deanimate.@OBJEXT@: $(DIR_PRIVOXY_SRC)/deanimate.c $(DIR_PRIVOXY_SRC)/deanimate.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS)
745 $(DIR_PRIVOXY_OBJ)/encode.@OBJEXT@: $(DIR_PRIVOXY_SRC)/encode.c $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/config.h
746 $(DIR_PRIVOXY_OBJ)/errlog.@OBJEXT@: $(DIR_PRIVOXY_SRC)/errlog.c $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h
747 $(DIR_PRIVOXY_OBJ)/filters.@OBJEXT@: $(DIR_PRIVOXY_SRC)/filters.c $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/deanimate.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/win32.h
748 $(DIR_PRIVOXY_OBJ)/gateway.@OBJEXT@: $(DIR_PRIVOXY_SRC)/gateway.c $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
749 $(DIR_PRIVOXY_OBJ)/jbsockets.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jbsockets.c $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/filters.h
750 $(DIR_PRIVOXY_OBJ)/jcc.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jcc.c $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/cgi.h
751 $(DIR_PRIVOXY_OBJ)/killpopup.@OBJEXT@: $(DIR_PRIVOXY_SRC)/killpopup.c $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
752 $(DIR_PRIVOXY_OBJ)/list.@OBJEXT@: $(DIR_PRIVOXY_SRC)/list.c $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/miscutil.h
753 $(DIR_PRIVOXY_OBJ)/loadcfg.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loadcfg.c $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h
754 $(DIR_PRIVOXY_OBJ)/loaders.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loaders.c $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h
755 $(DIR_PRIVOXY_OBJ)/miscutil.@OBJEXT@: $(DIR_PRIVOXY_SRC)/miscutil.c $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/config.h
756 $(DIR_PRIVOXY_OBJ)/parsers.@OBJEXT@: $(DIR_PRIVOXY_SRC)/parsers.c $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
757 $(DIR_PRIVOXY_OBJ)/ssplit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/ssplit.c $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/miscutil.h
758 $(DIR_PRIVOXY_OBJ)/urlmatch.@OBJEXT@: $(DIR_PRIVOXY_SRC)/urlmatch.c $(DIR_PRIVOXY_SRC)/urlmatch.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
761 $(DIR_PRIVOXY_OBJ)/pcrs.@OBJEXT@: $(DIR_PRIVOXY_SRC)/pcrs.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/config.h
764 $(DIR_PRIVOXY_OBJ)/get.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
765 $(DIR_PRIVOXY_OBJ)/maketables.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
766 $(DIR_PRIVOXY_OBJ)/pcre.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcre.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c
767 $(DIR_PRIVOXY_OBJ)/pcreposix.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
768 $(DIR_PRIVOXY_OBJ)/study.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
770 # An auxiliary program makes the PCRE default character table source
772 $(DIR_PRIVOXY_SRC_PCRE)/chartables.c: $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@
773 $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ >$(DIR_PRIVOXY_SRC_PCRE)/chartables.c
775 $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@: $(DIR_PRIVOXY_SRC_PCRE)/dftables.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/config.h
776 $(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
779 $(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
780 $(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.c $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
781 $(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/w32taskbar.h
783 $(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
784 $(DIR_PRIVOXY_SRC)/w32res.h \
785 $(DIR_PRIVOXY_SRC)/config.h \
786 $(DIR_PRIVOXY_SRC)/icons/ico00001.ico \
787 $(DIR_PRIVOXY_SRC)/icons/ico00002.ico \
788 $(DIR_PRIVOXY_SRC)/icons/ico00003.ico \
789 $(DIR_PRIVOXY_SRC)/icons/ico00004.ico \
790 $(DIR_PRIVOXY_SRC)/icons/ico00005.ico \
791 $(DIR_PRIVOXY_SRC)/icons/ico00006.ico \
792 $(DIR_PRIVOXY_SRC)/icons/ico00007.ico \
793 $(DIR_PRIVOXY_SRC)/icons/ico00008.ico \
794 $(DIR_PRIVOXY_SRC)/icons/idle.ico \
795 $(DIR_PRIVOXY_SRC)/icons/privoxy.ico
796 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
799 @AMIGAOS_ONLY@OBJS += $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@
800 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
801 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
802 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
803 $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@: $(DIR_PRIVOXY_SRC)/amiga.c $(DIR_PRIVOXY_SRC)/amiga.h $(DIR_PRIVOXY_SRC)/config.h
806 $(PROGRAM): $(OBJS) $(W32_FILES)
807 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
810 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) \
811 default.action `find . -name TAGS -o -name tags`
814 $(RM) `find . -name "*~"`
815 # $(RM) `find . -name "#*#"` # what is this for??
816 $(RM) `find . -name ".\#*"`
819 $(RM) GNUmakefile configure src/config.h.in src/config.h config.cache config.status config.log logfile \
820 privoxy.log core *.tar.gz *.tar privoxy-cl.spec $(DOC_DIR)/ldp.dsl \
821 $(DOC_DIR)/GNUmakefile
824 # FIXME: What is all this?
826 $(RM) cscope.* *.pdb *.lib *.exp
830 tags: $(SRCS) $(HDRS)
831 etags $(SRCS) $(HDRS)
833 CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
834 $(ECHO) "$(CONF_BASE)/privoxy";\
836 $(ECHO) "$(CONF_BASE)";\
839 LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
840 $(ECHO) "/var/log/privoxy" ;\
842 $(ECHO) "$(LOGS_DEST)";\
845 PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
846 $(ECHO) "/var/run" ;\
848 $(ECHO) "$(PIDS_DEST)";\
851 check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
857 # If USER is specified but no GROUP, assume there is a GROUP of same name.
858 GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
865 $(MAKE) install STRIP=-s
867 # FIXME: Test USER and GROUP on Slack to make sure this works as
870 # FIXME: id handling needs help, probably via configure, since 'id -u' is not
871 # universally reliable (eg Solaris). Group handling could be better.
872 # Perhaps the whole user/group validation should be done here, and simplified.
873 PROGRAM_V = Privoxy $(VERSION)
874 install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
875 # Quick test for valid USER.
876 if [ -n "$(USER)" ]; then \
877 $(ID) $(USER) >/dev/null || exit 1;\
879 # Test for valid group. FIXME. USER does not have to belong to GROUP
880 # for file ownership purposes.
881 # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
882 # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
885 $(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
886 $(CHMOD) $(DIR_MODE) $(MKDIR)
887 $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
888 $(LOG_DEST) $(PID_DEST)
889 # Install the executable binary, strip if invoked as install-strip
890 test -n "$(STRIP)" &&\
891 $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
892 $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
893 $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
895 # Install the DOCS and man page. install-sh only does one file at a time.
896 -if [ $(check_doc) = 0 ]; then \
899 DOC=$(prefix)/doc/privoxy ;\
901 $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
902 $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
903 if [ -d "$(DOK_WEB)" ]; then \
904 $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
905 for i in user-manual developer-manual faq; do \
906 for ii in $(DOK_WEB)/$$i/*html; do \
907 $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
910 for i in $(DOK_WEB)/images/*jpg; do \
911 $(INSTALL) $(INSTALL_T) $$i $$DOC/images;\
913 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
914 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
915 $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
916 $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
917 $(INSTALL) $(INSTALL_T) README $$DOC;\
918 $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
919 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
921 # Not all platforms support gzipped man pages.
922 $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
923 -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
925 # Change the config file default directories according to the configured ones
926 $(ECHO) Rewriting config for this installation
927 if [ -f config.base ] ; then \
928 $(CAT) config >config~ ;\
929 $(MV) config.base config ;\
931 $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
932 $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.updated
933 $(MV) config config.base
934 $(MV) config.updated config
936 # Install the config support files. Test for root install, and abort
937 # if there is no privoxy user, and no other user was enabled during
938 # configure. Later, install init script if appropriate.
939 $(ECHO) Installing templates to $(CONF_DEST)/templates
940 for i in `find templates -type f`; do \
941 $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
944 # FIXME: group/user validation is overly convoluted.
945 # If superuser install ... we require a minimum of group ownership
946 # of those files the daemon writes to, to be non-root owned.
947 if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
948 if [ x$(USER) = x ] || [ $(USER) = root ]; then \
949 if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
950 if [ "`$(ID) privoxy`" ] && \
951 $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
952 $(ECHO) "Warning: Setting group owner to privoxy";\
955 $(ECHO) "******************************************************************" ;\
956 $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
957 $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
958 $(ECHO) " and to install the config files as that user and/or group!" ;\
959 $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
960 $(ECHO) "*******************************************************************" ;\
966 INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
968 $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
969 INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
970 GROUP_T=$(GROUP_T) ;\
973 if [ ! "`id $(USER)`" = "`id`" ] ;then \
974 $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
975 $(ECHO) "Edit may fail." ;\
977 INSTALL_CONF="$(INSTALL_R)" ;\
979 $(ECHO) Installing configuration files to $(CONF_DEST);\
980 for i in $(CONFIGS); do \
981 if [ -s "$(CONF_DEST)/$$i" ] ; then \
982 $(ECHO) Installing $$i as $$i.new ;\
983 $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST)/$$i.new || exit 1;\
986 $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
989 if [ -n "$$NEW" ]; then \
990 $(CHMOD) $(RWD_MODE) $(CONF_DEST)/*.new || exit 1 ;\
991 $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
993 [ ! -f $(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(LOG_DEST) || \
994 $(ECHO) Checking logfiles in $(LOG_DEST) ;\
995 $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
996 if [ x$$USER != x ]; then \
997 $(CHOWN) $$USER $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
998 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
1000 if [ x$$GROUP_T != x ]; then \
1001 $(CHGRP) $$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
1002 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
1004 $(CHMOD) $(RWD_MODE) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
1005 if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
1006 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
1007 $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
1008 $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
1009 $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
1010 $(SED) 's+%USER%+$$USER+' | \
1011 $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
1012 $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
1013 $(ECHO) "Installing for Slackware." ;\
1014 $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
1015 elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
1016 $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
1017 $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
1018 $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
1019 $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
1020 $(INSTALL) $(INSTALL_P) init.tmp /etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
1021 $(MKDIR) /etc/logrotate.d/ ;\
1022 $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
1023 $(INSTALL) -m 0644 privoxy.logrotate /etc/logrotate.d/privoxy ;\
1024 elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
1025 $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
1026 $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
1027 $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
1030 $(ECHO) "No init script installed, install it manually if needed" ;\
1033 @$(ECHO) "$(PROGRAM_V) installation succeeded!"
1034 @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
1036 # rmdir is used as a precaution since it will not remove non-empty
1037 # directories. RH init script creates lock file and pid file.
1038 uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
1039 $(ECHO) Starting Privoxy uninstallation
1040 # KILL privoxy if running
1041 -if [ -f /etc/redhat-release ] && [ -x /etc/rc.d/init.d/privoxy ]; then \
1042 /etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
1043 chkconfig --del $(PROGRAM) 2>/dev/null;\
1045 -@ test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
1046 $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid`
1047 -@ test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
1048 $(KILL) `$(CAT) /var/run/privoxy.pid `
1051 $(ECHO) Removing $(PROGRAM) binary
1052 $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
1054 # config files and dir, and maybe old install backups
1055 -if [ -d $(CONF_DEST) ]; then \
1056 $(ECHO) Saving $(PROGRAM) config files ;\
1057 $(MKDIR) /tmp/$(PROGRAM)-save ;\
1059 for i in $(CONFIGS); do \
1060 [ -f $$i ] && $(CP) -v $$i /tmp/$(PROGRAM)-save ;\
1063 $(ECHO) Removing $(PROGRAM) config files
1064 for i in $(CONFIGS); do \
1065 $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
1067 $(RM) -r $(CONF_DEST)/templates
1070 $(ECHO) Removing $(PROGRAM) docs
1071 -$(RM) $(MAN_DEST)/privoxy.1*
1072 -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
1074 # Log and jarfile and pidfile
1075 $(ECHO) Removing $(PROGRAM) logs
1076 -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
1078 # Final clean up of unused directories. Special handling of CONF and LOG
1080 $(ECHO) Removing $(PROGRAM) directories
1081 for i in $(LOG_DEST) $(CONF_DEST); do \
1082 if test -d $$i; then \
1083 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1086 if [ ! "$(prefix)" = "/usr/local" ] ;then \
1087 for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
1088 if test -d $$i; then \
1089 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1092 if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
1093 $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
1095 if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
1096 $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
1098 if test $(prefix)/var != /var && test -d $(prefix)/var; then \
1099 $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
1101 if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
1102 $(ECHO) Removing installation directory $(prefix) ;\
1103 $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
1107 # init scripts and logrotate
1108 if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
1109 $(ECHO) Removing $(PROGRAM) init script ;\
1110 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
1111 $(RM) /etc/rc.d/rc.privoxy ;\
1112 elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
1113 $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
1114 elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
1115 $(RM) /etc/init.d/privoxy ;\
1117 $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
1120 $(ECHO) Privoxy uninstalled, bye
1123 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
1124 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
1125 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
1126 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
1127 193,51,228,11,1,0,0);'|zcat
1129 #############################################################################
1135 # $Log: GNUmakefile.in,v $
1136 # Revision 1.132 2002/10/24 22:24:58 hal9
1137 # Make install: Minor clean up for variable handling.
1139 # Revision 1.131 2002/10/23 07:00:21 agotneja
1140 # added a chmod on mkinstalldirs just before using it, otherwise it
1141 # will fail when running make for the first time.
1143 # Revision 1.130 2002/10/22 05:49:14 hal9
1145 # - /bin/sh on Solaris does not handle: ! test.
1146 # - Remove some unused doc variables.
1147 # - Make configs group writable.
1149 # Revision 1.129 2002/10/20 07:15:12 hal9
1150 # Getting near the end (I hope) of install target updates:
1151 # - Rewrite RH init script to reflect configured values.
1152 # - Test for USER=root as well as UID=0
1153 # - Test for invalid group (probably needs more work).
1154 # - Add /usr to /usr/local test for when to install init scripts, etc.
1155 # - More testing on previous changes.
1157 # Revision 1.128 2002/10/18 05:36:32 hal9
1158 # More install target fixes:
1159 # - Quick fix of log ownership on root install (lightly tested). If this goes
1160 # true to form, then the fix will break something else :(
1161 # - Fix what looks like was invalid user on Slack if root install and
1162 # we use an existing privoxy user. No way to test this.
1165 # Revision 1.127 2002/10/18 00:58:07 hal9
1166 # More install/uninstall/install-strip updates:
1167 # - Don't install gzipped man page (Solaris again).
1168 # - Don't overwrite existing config files, and install new versions as *.new.
1169 # Fix permissions/ownership here too.
1170 # - Better testing before removing directories.
1171 # - Some better messages during install, ie 'Preserving configs', etc.
1172 # - Better handling of install-strip to fix previous problem of trying to strip
1174 # - Crude test for valid USER in case is set on command line.
1175 # - Force immediate exit on some errors (eg invalid group).
1177 # Revision 1.126 2002/10/16 05:38:00 hal9
1178 # More make install/uninstall updates:
1179 # -Make compatible with install-sh with does not support -b flag, and can only
1180 # handle one file at a time (sigh).
1181 # -Manually save existing config files, if they exist.
1182 # -Fix install-strip so does not try to strip init scripts.
1184 # Revision 1.125 2002/10/15 05:53:34 hal9
1185 # A few more cleanups:
1186 # -use mkinstalldirs consistently.
1187 # -Install init script and logrotate only is prefix=/usr/local (installed to
1188 # system dir /etc instead of /usr/local...)
1189 # -Test for directory existence before removing to avoid misleading error
1192 # Revision 1.124 2002/10/13 19:58:09 hal9
1193 # Hopefully, this is final updates for install and uninstall targets.
1194 # - Fix typo in chown syntax
1195 # - chmod on mkinstalldirs to make it executable (is there a better way?).
1196 # - Cleanup comments, and revert most of previous output cleanup changes.
1197 # - Include all HTML docs, since there are cross links between these.
1198 # - Improved group handling (still some potential problems, see FIXME).
1199 # - Update PHONY targets.
1200 # - Uninstall was not removing CONF and LOG destinations in some situations.
1201 # - Various other minor cleanups.
1203 # Revision 1.123 2002/10/12 06:05:41 hal9
1204 # WIP: This is mostly to fix various problems encountered on SF CF Solaris
1205 # servers for the install target only. This did not handle /[^C]*, test -e, not
1206 # quoting within tests (ie [ `id $(USER)` = `id` ] needs quoting) in some
1207 # situations, and does not support id -u (with the id in $PATH, but there is
1208 # another...). Also, cleaned up output. Needs testing. I am unable to test the
1209 # root install stuff either. It installs now at least (not tested further).
1212 # Revision 1.122 2002/10/11 06:03:08 hal9
1213 # Really install FAQ this time, and not u-m in two locations. Include images
1216 # Revision 1.120 2002/10/10 20:39:27 dessent
1219 # Fixes for Win32 GUI build (added "$(DIR_PRIVOXY_SRC)/" to dependencies list)
1221 # Revision 1.119 2002/09/23 03:42:41 hal9
1222 # This is higuita's make install/uninstall patch. Needs testing please!!!
1224 # Revision 1.118 2002/09/11 08:22:37 oes
1225 # Fixed path (C_HDRS are in src/ now)
1227 # Revision 1.117 2002/09/06 23:33:35 hal9
1228 # Fix clobber for config.h and config.h.in are in src now.
1230 # Revision 1.116 2002/09/06 05:22:57 hal9
1231 # Adapt make webserver target to 3.0 for pdf uploading.
1233 # Revision 1.115 2002/09/05 19:13:04 hal9
1234 # Migrate Karstens make snapshot stuff (not tested).
1236 # Revision 1.114 2002/09/05 11:58:30 oes
1237 # Synced in some changes fromm the stable branch:
1238 # From Revision 1.104.2.14 2002/08/10 11:19:37 oes:
1239 # - Add dependency: pcrs.o deps on config.h
1240 # Revision 1.104.2.9 2002/07/26 15:17:02 oes
1241 # - Added generation of default.action from defaul.action.master
1242 # - Deleted obsolete re_filterfile.txt generation
1244 # Revision 1.113 2002/07/30 21:50:25 hal9
1245 # Add redhat-test target, and migrate the RPM_PACKAGEV stuff from 3.0 branch.
1247 # Revision 1.112 2002/06/28 18:30:10 jongfoster
1248 # Fixing bugs compiling PCRE
1250 # Revision 1.111 2002/06/05 00:26:21 hal9
1251 # Move all doc build stuff to doc/source/GNUmakefile, leaving a 'make dok'
1252 # target only in toplevel. Add DOC_STATUS variable so docs can be built without
1253 # touching sgml source.
1255 # Revision 1.110 2002/06/04 14:51:48 jongfoster
1256 # Updating for new paths:
1257 # - Source files in src/
1258 # - Object files in obj/
1260 # Revision 1.109 2002/05/28 09:16:15 oes
1261 # Added comment for -notoc kludge
1263 # Revision 1.108 2002/05/28 03:56:08 hal9
1264 # make dok-index target for privoxy-index.html. Fix *bak dead soldiers in
1267 # Revision 1.107 2002/05/27 23:26:33 mal0rd
1268 # Made doc-generation configuration automatic.
1269 # References to DB2HTML were removed, not used.
1270 # --with-docbook now only needed if in odd path.
1272 # Revision 1.106 2002/05/26 04:55:11 mal0rd
1273 # Added debian-dist and debian-upload targets. Also documented usage.
1275 # Revision 1.105 2002/05/25 22:48:19 hal9
1276 # Add -notoc to README build (per oes's dsl magic).
1278 # Revision 1.104 2002/05/24 00:03:49 oes
1279 # Use p_doc.css for the Homepage for consistency
1281 # Revision 1.103 2002/05/23 23:19:00 oes
1282 # Use dsl without TOC for the homepage
1284 # Revision 1.102 2002/05/16 01:20:17 hal9
1285 # make announce target added.
1287 # Revision 1.101 2002/05/15 12:28:46 oes
1288 # Trying to keep Hal happy :)
1290 # Revision 1.100 2002/05/08 13:48:18 hal9
1291 # Ooops, that trashed JB v2.0.2 comment. Fixed.
1293 # Revision 1.99 2002/05/08 13:42:07 hal9
1294 # This fixes the numbering problem on index.html in contact info section (.1.). Using
1295 # perl, since its way too convoluted to try to fix proper with docbook.
1297 # Revision 1.98 2002/05/03 14:33:06 oes
1298 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
1300 # Revision 1.97 2002/04/27 20:27:43 swa
1301 # no longer needed due to new
1302 # PACKAGE_VERSION process
1304 # Revision 1.96 2002/04/27 17:44:32 morcego
1305 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
1306 # - Using the RM macro everywhere rm is called (either we use, or don't)
1309 # Revision 1.95 2002/04/27 15:37:25 swa
1310 # replacing directory in document creation process
1311 # no longer necessary.
1313 # Revision 1.94 2002/04/27 08:23:29 swa
1314 # pdf process reviewed and cleaned up
1316 # Revision 1.93 2002/04/27 04:55:53 morcego
1317 # privoxy-cl.spec now gets removed by clobber target
1319 # Revision 1.92 2002/04/27 04:53:40 morcego
1320 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
1323 # Revision 1.91 2002/04/27 04:44:51 morcego
1324 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
1325 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
1326 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
1328 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
1329 # for Conectiva Linux
1331 # Revision 1.90 2002/04/26 17:46:53 swa
1334 # Revision 1.89 2002/04/26 17:20:54 swa
1335 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1337 # Revision 1.88 2002/04/25 19:13:57 morcego
1338 # Removed RPM release number declaration on configure.in
1339 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1340 # targets (will produce an error, explaining who to do it, if no value
1343 # Revision 1.87 2002/04/23 14:10:59 swa
1344 # now create pdf documents
1346 # Revision 1.86 2002/04/15 04:30:27 hal9
1347 # Missed two -pi.bak's on perl/cygwin problem.
1349 # Revision 1.85 2002/04/14 01:05:34 hal9
1350 # Revert dok-webserver change for SF logo.
1352 # Revision 1.84 2002/04/13 22:43:25 hal9
1353 # -Fix dok-webserver for SF logo (more perl).
1354 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1356 # Revision 1.83 2002/04/12 09:39:25 oes
1357 # Excluding yet more files from tarball; making dist warning yet more scary
1359 # Revision 1.82 2002/04/11 21:07:11 oes
1360 # Excluding more files from tarball build
1362 # Revision 1.81 2002/04/11 14:40:27 oes
1363 # Fixed typo -- Thanks, Moritz!
1365 # Revision 1.80 2002/04/11 12:50:00 oes
1366 # Fixed tarball-dist target
1368 # Revision 1.79 2002/04/11 06:49:28 oes
1369 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1371 # Revision 1.78 2002/04/09 13:37:11 sarantis
1372 # fix tar options typo
1374 # Revision 1.77 2002/04/09 13:28:53 swa
1375 # build suse and gen-dist with html docs
1377 # Revision 1.76 2002/04/08 22:43:41 oes
1378 # Fix: Include dotfiles in fixing webserver permissions
1380 # Revision 1.75 2002/04/08 22:14:59 oes
1381 # Silencing tar warnings in the web* targets
1383 # Revision 1.74 2002/04/08 15:22:44 hal9
1384 # This has finishing touches for dok building. Should be ready to go.
1385 # -The main doc build is now 'make dok', should work on Redhat too.
1386 # -Removed man page from main doc build. It is built separately due to
1387 # perl scripts that most aren't likely to have.
1389 # Revision 1.73 2002/04/08 14:03:24 oes
1390 # oes for al: Fix install target
1392 # Revision 1.72 2002/04/08 13:42:11 oes
1393 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1395 # Revision 1.71 2002/04/07 20:32:03 hal9
1396 # -Add meta data kludge for make dok-webserver via $(PERL).
1397 # -Add subdirs for 'make dok-release'.
1399 # Revision 1.70 2002/04/07 08:59:40 swa
1400 # generated files. do NOT edit.
1401 # fixed directory bug in makefile.
1403 # Revision 1.69 2002/04/07 08:10:47 swa
1404 # create some of the webserver docs
1405 # automatically (in particular if
1406 # those docs recycle other documentation
1407 # fragments). Now committed webserver's
1410 # Revision 1.68 2002/04/07 07:58:11 swa
1411 # create some of the webserver docs
1412 # automatically (in particular if
1413 # those docs recycle other documentation
1416 # Revision 1.67 2002/04/07 05:31:42 hal9
1417 # Add 'dok-release' target:
1418 # -Set doc entities to VERSION and CODE_STATUS during make.
1419 # -Set doc conditional content flags (stable vs non-stable).
1420 # A separate target for the time being but needs to be incorporated into
1421 # dok build at some point.
1422 # -Filter out a spurious ^G from new man page > html converion in man2html.
1424 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1425 # Prettifying groff2html.
1426 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1427 # (The shell "if"s were hiding errors)
1428 # "perl" -> "$(PERL)"
1429 # Spaces->tabs in a couple of places.
1431 # Revision 1.65 2002/04/06 05:16:39 hal9
1432 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1433 # -Both of these will soon be generated files.
1435 # Revision 1.64 2002/04/04 22:14:51 oes
1436 # No longer rely on find honoring -iname
1438 # Revision 1.63 2002/04/04 21:06:22 swa
1441 # Revision 1.62 2002/04/04 20:49:50 swa
1442 # attempt to consolidate the
1443 # different dokbook versions.
1445 # Revision 1.61 2002/04/04 19:18:21 swa
1446 # readme was leftover directory. use w3m instead
1447 # of lynx to be consistent among developers. use
1448 # consistent target naming.
1450 # Revision 1.60 2002/04/04 12:25:41 oes
1451 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1453 # Revision 1.59 2002/04/04 08:32:45 swa
1454 # wrong name for tarball-dist target. further fixed content of tarball dist
1456 # Revision 1.58 2002/04/04 06:32:58 hal9
1457 # New dok targets for make readme.
1459 # Revision 1.57 2002/04/04 00:36:36 gliptak
1460 # always use pcre for matching
1462 # Revision 1.56 2002/04/03 22:28:03 gliptak
1463 # Removed references to gnu_regex
1465 # Revision 1.55 2002/04/03 19:54:29 swa
1466 # freebsd tested to work. attempt to move tarball dist target forward
1468 # Revision 1.54 2002/04/03 14:54:07 oes
1469 # Standard clean and clobber semantics II
1471 # Revision 1.53 2002/04/03 14:19:16 oes
1472 # Standard clean and clobber semantics
1474 # Revision 1.52 2002/04/03 02:56:18 hal9
1475 # Revert previous FAQ numbering kludge.
1477 # Revision 1.51 2002/04/02 13:03:56 oes
1478 # Added fix for webserver permissions
1480 # Revision 1.50 2002/04/02 03:46:24 hal9
1481 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1482 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1484 # Revision 1.49 2002/03/30 22:20:12 swa
1485 # cd didn't work. neither did find.
1487 # Revision 1.48 2002/03/30 19:04:06 swa
1488 # people release differently. no good.
1489 # I want to make parts of the docs only.
1491 # Revision 1.47 2002/03/30 09:05:21 swa
1492 # better packaging. better rpm building.
1493 # tar failed on sun (no exclude there).
1495 # Revision 1.46 2002/03/29 20:09:01 swa
1498 # Revision 1.45 2002/03/29 19:45:45 swa
1501 # Revision 1.44 2002/03/29 17:42:44 gliptak
1502 # Correcting for Solaris tar limitations
1504 # Revision 1.43 2002/03/29 07:40:03 swa
1505 # fixed make webserver. doh
1507 # Revision 1.42 2002/03/29 06:59:04 swa
1508 # other users could not modify files on webserver
1510 # Revision 1.41 2002/03/28 20:43:00 swa
1511 # set make correctly
1513 # Revision 1.40 2002/03/28 04:22:44 hal9
1514 # More on man2html stuff.
1516 # Revision 1.39 2002/03/28 01:04:14 hal9
1517 # More man2html stuff for docs.
1519 # Revision 1.38 2002/03/27 16:02:30 swa
1520 # have a generic target
1522 # Revision 1.37 2002/03/27 15:30:26 swa
1523 # have a consistent appearance
1525 # Revision 1.36 2002/03/27 14:58:08 swa
1526 # can be used by mutilple targets
1528 # Revision 1.35 2002/03/27 14:53:19 swa
1529 # added solaris-dist
1531 # Revision 1.34 2002/03/27 10:30:11 swa
1532 # we want a html man file on the webserver
1534 # Revision 1.33 2002/03/27 03:05:35 hal9
1535 # Added man2html target for docs (redhat-dok only for now)
1537 # Revision 1.32 2002/03/26 22:29:54 swa
1538 # we have a new homepage!
1540 # Revision 1.31 2002/03/26 14:00:18 swa
1541 # fixed make tarball, tarball-dist, tarball-clean
1543 # Revision 1.30 2002/03/25 12:52:25 swa
1546 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1549 # Revision 1.28 2002/03/24 16:19:48 swa
1550 # configure needs to be generated.
1552 # Revision 1.27 2002/03/24 16:13:57 swa
1553 # generated files are a nono in cvs
1555 # Revision 1.26 2002/03/24 15:36:02 swa
1558 # Revision 1.25 2002/03/24 14:31:08 swa
1559 # remove more crappy files. set RPM
1560 # release version correctly.
1562 # Revision 1.24 2002/03/24 14:19:55 swa
1563 # set rpm package release in configure.in. nowhere else.
1565 # Revision 1.23 2002/03/24 13:06:49 swa
1566 # suse-clean now runs fine
1568 # Revision 1.22 2002/03/24 12:56:21 swa
1569 # name change related issues.
1571 # Revision 1.21 2002/03/24 12:43:57 swa
1574 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1575 # Renaming config files
1577 # Revision 1.19 2002/03/22 20:53:03 morcego
1578 # - Ongoing process to change name to JunkbusterNG
1579 # - configure/configure.in: no change needed
1581 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1582 # - PROGRAM = jbng@EXEEXT@
1583 # - rh-spec now references as junkbusterng-rh.spec
1584 # - redhat-upload: references changed to junkbusterng-* (package names)
1585 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1586 # - tarball-src: now JunkbusterNG-*
1587 # - install: initscript now junkbusterng.init and junkbusterng (when
1589 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1590 # - junkbusterng.spec:
1591 # - References to the expression ijb where changed where possible
1592 # - New package name: junkbusterng (all in lower case, acording to
1593 # the LSB recomendation)
1594 # - Version changed to: 2.9.13
1596 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1597 # right. If it obsoletes, why conflict ? Have to check it later)
1598 # - Summary changed: Stefan, please check and aprove it
1599 # - Changes description to use the new name
1600 # - Sed string was NOT changed. Have to wait to the manpage to
1602 # - Keeping the user junkbuster for now. It will require some aditional
1603 # changes on the script (scheduled for the next specfile release)
1604 # - Added post entry to move the old logfile to the new log directory
1605 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1606 # added to the startup list).
1607 # - Added preun section to stop the service with the old name, as well
1608 # as remove it from the startup list
1609 # - Removed the chkconfig --del entry from the conditional block on
1610 # the preun scriptlet (now handled on the %files section)
1611 # - junkbuster.init: renamed to junkbusterng.init
1612 # - junkbusterng.init:
1613 # - Changed JB_BIN to jbng
1614 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1615 # be used where necessary (config dir)
1618 # - The config directory is /etc/junkbuster yet. Have to change it on the
1619 # specfile, after it is changes on the code
1620 # - The only files that got renamed on the cvs tree were the rh specfile and
1621 # the init file. Some file references got changes on the makefile and on the
1622 # rh-spec (as listed above)
1624 # Revision 1.18 2002/03/21 23:00:00 swa
1625 # want to autogenerate stuff.
1627 # Revision 1.17 2002/03/19 19:30:04 morcego
1628 # - Fixing stylesheet checking on configure. If it is found, no further checks
1631 # - configure will now check for db2html or docbook2html (should work now
1632 # on SuSe without the docbktls package)
1634 # Revision 1.16 2002/03/14 22:32:32 hal9
1635 # Bumped the RPM version.
1637 # Revision 1.15 2002/03/08 20:00:28 swa
1640 # Revision 1.14 2002/03/07 18:25:56 swa
1641 # synced redhat and suse build process
1643 # Revision 1.13 2002/03/07 17:17:56 oes
1644 # (Hopefully) fixed for older make versions
1646 # Revision 1.12 2002/03/07 15:28:27 swa
1649 # Revision 1.11 2002/03/06 14:33:18 sarantis
1650 # Use proper temp file, not "abc".
1652 # Revision 1.10 2002/03/06 14:19:35 sarantis
1653 # Cleanup PID_FILE_PATH from redhat-dist target
1655 # Revision 1.9 2002/03/05 17:31:11 morcego
1656 # Search for docbook.dsl. Should solve portability problems for SuSe.
1658 # Revision 1.8 2002/03/05 14:07:42 morcego
1659 # configure now detects rpm topdir, and change GNUmakefile acordingly
1660 # (based on sugestion by Sarantis Paskalis)
1662 # Revision 1.7 2002/03/05 13:43:28 morcego
1663 # Checking for text browser, so redhat-dok can work.
1665 # Revision 1.6 2002/03/05 13:10:51 morcego
1666 # Changes to implement redhat-dok (Hal Burgiss)
1667 # Changes to make it work on other distros and out-of-the-shelf configurations
1669 # Revision 1.5 2002/02/27 15:30:39 hal9
1670 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1672 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1673 # Adding urlmatch.[ch]
1675 # Revision 1.3 2002/01/04 15:26:08 oes
1676 # Added tarball-src target
1678 # Revision 1.2 2001/12/30 14:07:31 steudten
1679 # - Add signal handling (unix)
1680 # - Add SIGHUP handler (unix)
1681 # - Add creation of pidfile (unix)
1682 # - Add action 'top' in rc file (RH)
1683 # - Add entry 'SIGNALS' to manpage
1684 # - Add exit message to logfile (unix)
1686 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1687 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1688 # make break in a more obvious way.
1689 # Adding .PHONY section.
1691 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1692 # Renaming various config files
1693 # Fixing CR->CRLF under Win32 (I hope)
1695 # Revision 1.39 2001/11/06 12:07:30 steudten
1696 # Add --clean for building rpm in target redhat-dist.
1698 # Revision 1.38 2001/11/05 21:35:23 steudten
1699 # Complete rewrite for the 'redhat-dist' target.
1700 # Checks for writeable RPM build directories for calling user.
1701 # So you must not be root, just set the modes to 1777 to
1702 # build a RH package.
1703 # Fix the upload-target to be arch independant.
1704 # Add target for 'solaris-dist' - coming soon.
1706 # Revision 1.37 2001/11/01 00:52:04 hal9
1707 # Redhat-upload stuff per Stefan.
1709 # Revision 1.36 2001/10/31 19:26:13 swa
1710 # automate process of uploading new releases
1713 # Revision 1.35 2001/10/15 22:14:59 joergs
1714 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1715 # the general CFLAGS already.
1717 # Revision 1.34 2001/10/15 18:28:06 steudten
1718 # remove config.cache for target clobber.
1719 # Cleanup make dist for RH and S.u.S.E.
1721 # Revision 1.33 2001/10/10 12:43:33 oes
1722 # Added ugly hack to make install target work at least for some setups.
1724 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1725 # Correcting actionsfile filename for Win32 INI build
1727 # Revision 1.31 2001/09/23 10:13:48 swa
1728 # upload process established. run make webserver and
1729 # the documentation is moved to the webserver. documents
1730 # are now linked correctly.
1732 # Revision 1.30 2001/09/19 17:55:49 oes
1735 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1736 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1737 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1738 # of build problems.
1740 # Revision 1.28 2001/09/13 15:19:08 swa
1741 # we want text files as well.
1743 # Revision 1.27 2001/09/13 13:11:37 steudten
1745 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1747 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1748 # Mac OSX (Darwin) support added.
1750 # Revision 1.25 2001/09/12 22:55:45 joergs
1751 # AmigaOS support added.
1753 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1755 # OS/2 port: update autoconf'd support for the platform.
1757 # Revision 1.23 2001/09/12 16:28:42 swa
1758 # added "make dok" section to generate html pages from
1759 # the sgml source documents. note that the we do not want
1760 # generated stuff in cvs.
1762 # Revision 1.22 2001/09/10 16:31:23 swa
1763 # buildroot definition in the specfile fucks up the build
1764 # process under suse. hence I moved it to the "rpm -ta"
1767 # Revision 1.21 2001/09/10 11:12:49 oes
1770 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1771 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1773 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1774 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1776 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1777 # Major changes to build system in order to fix these bugs:
1778 # - pthreads under Linux was broken - changed -lpthread to -pthread
1779 # - Compiling in MinGW32 mode under CygWin now correctly detects
1780 # which shared libraries are available
1781 # - Solaris support (?) (Not tested under Solaris yet)
1783 # Revision 1.17 2001/07/28 16:44:54 oes
1784 # Fixed sed LF->CRLF conversion and removed deprecated files
1786 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1787 # Added support for linking with POSIX threads library
1789 # Revision 1.15 2001/07/13 13:48:07 oes
1790 # - Moved STATIC #define for pcre to (ac)config.h
1791 # - Made -Ipcre depandant on static pcre compilation to
1792 # avoid version conflicts
1793 # - Included compilation and depandancies for new deanimate.c
1794 # - Made changes to the pcre/pcreposix/pcrs build process
1795 # as required by the new library autodetection in
1798 # Revision 1.14 2001/07/01 16:27:44 oes
1799 # Fixed misplaced dependancy
1801 # Revision 1.13 2001/06/29 13:18:36 oes
1802 # - added depandancy of filters.o on cgi.h
1804 # Revision 1.12 2001/06/12 17:15:56 swa
1805 # fixes, because a clean build on rh6.1 was impossible.
1806 # GZIP confuses make, %configure confuses rpm, etc.
1808 # Revision 1.11 2001/06/11 11:26:35 sarantis
1809 # RPM version should be the same as ijbswa version. The rpm release is
1810 # specified in the specfile.
1812 # Revision 1.10 2001/06/07 17:27:45 swa
1813 # added suse build section
1815 # Revision 1.9 2001/06/04 18:31:58 swa
1816 # files are now prefixed with either `confdir' or `logdir'.
1817 # `make redhat-dist' replaces both entries confdir and logdir
1818 # with redhat values
1820 # Revision 1.8 2001/06/04 10:44:57 swa
1821 # `make redhatr-dist' now works. Except for the paths
1822 # in the config file.
1824 # Revision 1.7 2001/06/03 17:09:09 swa
1825 # swa for oes: reversed my earlier change
1827 # Revision 1.6 2001/06/03 17:07:27 swa
1830 # Revision 1.5 2001/06/03 13:57:26 swa
1831 # compile cgi.c (for andreas' GUI)
1833 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1834 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1836 # Revision 1.3 2001/05/29 20:02:48 joergs
1837 # Changes for AmigaOS added.
1839 # Revision 1.2 2001/05/17 22:23:23 oes
1840 # - Added auto-generation of CRLFs for Win32 config files
1841 # - Added comment-prefix to all Win32-only options in the config file
1842 # and provided auto stripping of this prefix for the Win32 platform by make
1844 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1845 # Initial import of version 2.9.3 source tree