1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.183 2009/09/26 17:13:02 fabiankeil Exp $
5 # Written by and Copyright (C) 2001 - 2008 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
48 #############################################################################
49 # "make install" directories and variables
50 #############################################################################
56 datarootdir = @datarootdir@
58 exec_prefix = @exec_prefix@
59 CONF_BASE = @sysconfdir@
62 MAN_DEST = $(MAN_DIR)/man1
63 SHARE_DEST = @datadir@
64 DOC_DEST = $(SHARE_DEST)/doc/privoxy
65 VAR_DEST = @localstatedir@
66 LOGS_DEST = $(VAR_DEST)/log/privoxy
67 PIDS_DEST = $(VAR_DEST)/run
69 # if $prefix = /usr/local then the default CONFDEST change from
70 # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
71 # by the target rule CONF_DEST
73 # also if the $prefix is /usr/local and there is no
74 # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
75 # instead in this situation
77 # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
78 # changes this to /var for storing the logs and pidfile
80 # used in source dir only, the install goes to $share_dest/doc/privoxy
81 DOK_WEB = doc/webserver/
83 # Install usage should be compatible with install-sh.
87 # Support files, docs, etc.
91 # Files daemon writes to.
93 INSTALL_P = -m $(BIN_MODE)
94 INSTALL_T = -m $(RA_MODE)
95 INSTALL_D = -m $(DIR_MODE) -d
96 INSTALL_R = -m $(RWD_MODE)
98 # install options for superuser install
99 #INSTALL_S = -g @GROUP@ -o @USER@
101 #############################################################################
103 #############################################################################
105 PROGRAM = privoxy@EXEEXT@
110 # id -u is not universal. FIXME: need to set from configure. Breaks on
118 MKDIR = ./mkinstalldirs
132 WDUMP = @WDUMP@ -dump
135 DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
137 MAN2HTML = @MAN2HTML@
138 G2H_CMD = groff -mandoc -Thtml
142 DOC_TMP = $(DOC_DIR)/tmp
143 DOC_STATUS = @DOC_STATUS@
145 # Program to do LF->CRLF
147 # The sed version should be the most portable, but it doesn't for for me,
148 # the other two do. FIXME.
150 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
151 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
152 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
153 CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
154 #TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
156 #############################################################################
157 # Setup for make distribution for now.
158 #############################################################################
160 TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
162 #############################################################################
163 # We include these files in our distributions
164 #############################################################################
165 CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
166 # take care that no CVS .cvsignore or other crappy files
168 # and escape every '#' in the find. doh.
169 CONFIG_FILES = $(CONFIGS) \
170 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
172 DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
173 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
174 `find doc/webserver/ -name "*.css"` \
177 #############################################################################
178 # Filenames and libraries
179 #############################################################################
181 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
182 errlog.c filters.c gateway.c jbsockets.c jcc.c \
183 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
186 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
187 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
189 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
190 W32_FILES = @WIN_ONLY@w32.res
191 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
192 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
193 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
194 W32_INIS = @WIN_ONLY@config.txt trust.txt
196 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
197 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
198 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
200 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
201 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
202 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
204 # No REGEX (maybe because dynamically linked pcreposix):
206 @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
208 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
209 REGEX_HDRS = $(REGEX_SRC:.c=.h)
211 # Dependencies introduced by #include "project.h".
212 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
214 # Socket libraries for platforms that need them explicitly defined
215 SOCKET_LIB = @SOCKET_LIB@
217 # PThreads library, if needed.
218 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
220 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
221 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
222 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
223 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
226 #############################################################################
228 #############################################################################
230 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
231 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
233 # The flag "-pthread" is required if using Pthreads under Linux (and
234 # possibly other OSs).
235 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
237 # Add your flags here
240 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
241 @STATIC_PCRE_ONLY@ -Ipcre
243 LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
246 #############################################################################
249 # There should NOT be any targets above this line.
250 #############################################################################
251 all: $(PROGRAM) default.action
254 #############################################################################
256 #############################################################################
257 .PHONY: all inifiles solaris-dist \
258 win-dist tarball-dist dok webserver clean clobber tags \
259 install CONF_DEST LOG_DEST \
260 PID_DEST check_doc install-strip uninstall GROUP_T
262 #############################################################################
263 # Define this explicitly because Solaris is broken!
264 #############################################################################
266 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
269 #############################################################################
270 # Strip master copy comments from default.action:
271 #############################################################################
272 default.action: default.action.master
273 $(GREP) -v '^#MASTER#' $< > $@
275 #############################################################################
277 #############################################################################
279 inifiles: $(W32_INIS)
282 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
283 -e 's!\logfile logfile!logfile privoxy.log!' \
284 -e 's!#Win32-only: !!' \
287 # LF to CRLF in default.action
288 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
289 # LF to CRLF in default.filter
290 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
293 $(DOSFILTER) < $< > $@
295 #############################################################################
297 #############################################################################
299 @if [ -d CVS ]; then \
300 $(ECHO) "***************************************************"; \
302 $(ECHO) "*** WARNING ***"; \
304 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
305 $(ECHO) "*** that you are trying to build a distribution ***"; \
306 $(ECHO) "*** package based on a checked out, not an ***"; \
307 $(ECHO) "*** exported copy of the source tree. Please ***"; \
308 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
309 $(ECHO) "*** developer manual. ***"; \
311 $(ECHO) "***************************************************"; \
312 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
313 $(ECHO) -n "really want to proceed: "; \
315 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
319 #############################################################################
320 # create tar.gz from CVS:
321 # This make-target is usually called through 'create-archive'. If you
322 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
323 # tar.gz with the current date in the name and as a releasenumber in the
324 # spec-file. But the main usage is to run it as follows (Red Hat example):
325 # make SNAPVERSION=1.6x create-snapshot
326 # This creates a tar.gz.
327 #############################################################################
329 @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
330 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
331 echo "*** Creating package from $$tag!"; \
332 TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
333 cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
334 cd $$TMPDIR/current; \
335 $(TAR) --exclude ".cvsignore" --exclude "CVS" \
336 -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
338 @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
341 #############################################################################
342 # looks at the version of Makefile and exports a corresponding source-tree
343 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
344 # privoxy-*-2.4.13.tar.gz.
345 #############################################################################
347 make SNAPVERSION=$(SNAPVERSION) create-snapshot
349 #############################################################################
350 # generic distribution
351 #############################################################################
354 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
357 $(STRIP_PROG) $(PROGRAM)
358 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
360 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
362 for foo in $(CONFIG_FILES); do \
363 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
366 for foo in $(DOC_FILES); do \
367 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
369 # and zip the archive
370 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
371 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
372 @$(ECHO) Distribution with binary created.
374 # anonymously ncftps the package to sourceforge
376 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
377 @$(ECHO) -------------------------------------------------------
379 @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
380 @$(ECHO) ... and release the files.
381 @$(ECHO) -------------------------------------------------------
385 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
387 #############################################################################
388 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
389 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
390 #############################################################################
392 tarball-dist: dist-check clean clobber
393 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
395 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
396 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
397 -name "PACKAGERS" \)`; do \
398 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
400 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
402 # and zip the archive
403 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
404 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
405 @$(ECHO) Tarball distribution created.
407 # anonymously ncftps the tarball to sourceforge
409 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
410 @$(ECHO) -------------------------------------------------------
412 @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
413 @$(ECHO) ... and release the files.
414 @$(ECHO) -------------------------------------------------------
417 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
419 #############################################################################
423 # converts doc/source/*.sgml into html and man pages
425 #############################################################################
429 $(RM) doc/webserver/developer-manual/*.html
430 $(RM) -r doc/source/developer-manual
431 mkdir -p doc/source/developer-manual
432 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
436 $(RM) doc/webserver/user-manual/*.html
437 $(RM) -r doc/source/user-manual/
438 mkdir -p doc/source/user-manual
439 cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
440 # FIXME: temp fix so same stylesheet gets in more than one place so it works
441 # for all doc set-ups, including the 'user manual' config option in local
442 # system where it MUST be in same directory as html.
443 $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
447 $(RM) doc/webserver/faq/*.html
448 $(RM) -r doc/source/faq
449 mkdir -p doc/source/faq
450 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
452 # man page, one variation. Try to use the next target, just 'make man'.
454 $(RM) doc/man/* doc/webserver/man-page/*.html
455 ifneq ($(MAN2HTML),false)
456 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
457 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
458 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
463 # Build man page from sgml. This requires the SGMLSpm perl module.
464 # See CPAN, or your favorite perl repository. This is the preferred
465 # target for man page generation!
467 mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
468 nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
469 perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
470 perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
471 perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
472 perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
473 perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
474 perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
475 $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
477 # For those with man2html ala RH7s.
479 mkdir -p doc/webserver/man-page
480 ifneq ($(MAN2HTML),false)
481 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
482 $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
483 $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
484 # Twice because my version of man2html is pulling in commas and periods in URLs.
485 $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
486 $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
487 $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
488 # Get rid of spurious
\a from conversion. (How to do this with perl?)
489 $(SED) -e 's/
\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
495 # Otherwise we get plain groff conversion.
497 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
500 # readme page and INSTALL file
501 dok-readme: dok-release
502 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
503 env -u LANG $(WDUMP) tmp.html > ../../README ;\
504 $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
505 env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
508 # index.sgml is used to create both the Home Page, and a local index
509 # for documentation, etc.
511 # index.html for webserver:
513 cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
514 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
515 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
516 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
519 doc/webserver/index.html && $(RM) doc/webserver/*.bak
521 # privoxy-index.html for local documentation:
523 cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
524 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
525 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
526 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
529 doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
531 # Main documentation target.
532 dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
533 @$(ECHO) Documentation created.
537 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
538 tmp.html > ../../AUTHORS && $(RM) tmp.html
540 # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
541 # exceptions accordingly. This needs to go before any doc building (doh).
543 @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
544 @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
545 s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
546 doc/source/*sgml doc/source/*/*sgml
547 $(RM) -r doc/source/*bak doc/source/*/*bak
548 ifeq ($(CODE_STATUS),stable)
549 @$(ECHO) Setting docs to stable $(VERSION)
550 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
551 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
552 doc/source/*sgml doc/source/*/*sgml
553 $(RM) -r doc/source/*bak doc/source/*/*bak
555 @$(ECHO) Setting docs to not stable $(VERSION)
556 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
557 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
558 doc/source/*sgml doc/source/*/*sgml
559 $(RM) -r doc/source/*bak doc/source/*/*bak
562 # Create release announcement in text and html, with short and long versions.
563 # This is a standalone target, and must be invoked directly.
564 # announce: dok-release
565 # mkdir -p $(DOC_TMP)
566 # cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
567 # mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
568 # cd $(DOC_TMP) && $(DB) announce.sgml &&\
569 # mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
570 # mv -f *html *txt ../../..
573 # The main Privoxy config file, generated from sgml sources.
574 # NOTE: This will require some hand editing. The new file is outputted
575 # as config.new so that problem sections can be compared to previous
576 # version. This is hardcored to w3m for html/text conversion. Also,
577 # requires the shell util 'fmt'.
578 config-file: dok-release
579 cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
580 env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
581 $(PERL) -i.bak utils/prepare-configfile.pl config.new
584 @$(ECHO) "****************************************************"
585 @$(ECHO) "The output file is config.new."
586 @$(ECHO) "Now -- you need to hand edit the results!!!"
587 @$(ECHO) "In particular, check the Debug levels, the"
588 @$(ECHO) "permit-access, forward & socks examples and the"
589 @$(ECHO) "various user-manual examples, which all"
590 @$(ECHO) "probably got hammered."
591 @$(ECHO) "****************************************************"
593 # config file, alternate version using lynx (perl stuff unfinished). Lynx
594 # does not do so good a job.
596 cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
597 $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
598 lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
599 $(PERL) -pi -e 's/^( )//;\
600 s/:$\/:\n/' config.new
602 #############################################################################
606 # moves dokumentation to webserver
608 #############################################################################
610 @$(ECHO) -------------------------------------------------------
611 @$(ECHO) You will need to "create" a SF shell first:
612 @$(ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create
613 @$(ECHO) Please make sure your documentation files are up to date.
614 @$(ECHO) Note that this command updates the home page and scps
615 @$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
616 @$(ECHO) You will also need to change the user-manual symlink manually.
617 @$(ECHO) -------------------------------------------------------
619 @$(ECHO) Uploading html
621 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
622 $(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
624 @$(ECHO) Fixing permissions
625 @ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
626 @ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
627 @ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
632 @cd doc/webserver/actions; \
633 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
634 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
636 @$(ECHO) Fixing permissions
637 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
638 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
642 tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
643 --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
644 doc/* INSTALL LICENSE AUTHORS README \
646 $(ECHO) "Uploading doc package ..." ;\
647 scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
648 @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
653 $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
654 $(TAR) -zxvf $(DOC_FILE)
657 #############################################################################
658 # Source file dependencies
659 #############################################################################
661 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
662 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
663 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
664 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
665 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
666 encode.@OBJEXT@: encode.c encode.h config.h
667 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
668 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
669 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
670 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
671 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
672 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
673 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
674 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
675 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
676 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
677 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
678 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
681 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
684 pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
687 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
688 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
689 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
690 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
691 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
693 # An auxiliary program makes the PCRE default character table source
695 pcre/chartables.c: pcre/dftables@EXEEXT@
696 pcre/dftables@EXEEXT@ >pcre/chartables.c
698 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
699 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
702 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
703 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
704 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
706 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
707 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
710 @AMIGAOS_ONLY@OBJS += amiga.o
711 @AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
712 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
713 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
714 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
716 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
718 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
721 $(PROGRAM): $(OBJS) $(W32_FILES)
722 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
725 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
726 `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
729 $(RM) `find . -name "*~"`
730 $(RM) `find . -name "#*#"` # Emacs backup files
731 $(RM) `find . -name ".\#*"`
734 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
735 privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
736 $(RM) -r autom4te.cache
739 # FIXME: What is all this?
741 $(RM) cscope.* *.pdb *.lib *.exp
745 tags: $(SRCS) $(HDRS)
746 etags $(SRCS) $(HDRS)
748 CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
749 $(ECHO) "$(CONF_BASE)/privoxy";\
751 $(ECHO) "$(CONF_BASE)";\
754 LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
755 $(ECHO) "/var/log/privoxy" ;\
757 $(ECHO) "$(LOGS_DEST)";\
760 PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
761 $(ECHO) "/var/run" ;\
763 $(ECHO) "$(PIDS_DEST)";\
766 check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
772 # If USER is specified but no GROUP, assume there is a GROUP of same name.
773 GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
780 $(MAKE) install STRIP=-s
782 # FIXME: Test USER and GROUP on Slack to make sure this works as
785 # FIXME: id handling needs help, probably via configure, since 'id -u' is not
786 # universally reliable (eg Solaris). Group handling could be better.
787 # Perhaps the whole user/group validation should be done here, and simplified.
788 PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
789 install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
790 @# Quick test for valid USER.
791 @if [ -n "$(USER)" ]; then \
792 $(ID) $(USER) >/dev/null || exit 1;\
794 @# Test for valid group. FIXME. USER does not have to belong to GROUP
795 @# for file ownership purposes.
796 # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
797 # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
800 @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
801 $(CHMOD) $(DIR_MODE) $(MKDIR)
802 @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
803 $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
804 $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
805 @# Install the executable binary, strip if invoked as install-strip
806 @test -n "$(STRIP)" &&\
807 $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
808 $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
809 $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
811 @# Install the DOCS and man page. install-sh only does one file at a time.
812 @# FIXME: only handles jpegs.
813 -@if [ $(check_doc) = 0 ]; then \
816 DOC=$(prefix)/doc/privoxy ;\
818 $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
819 $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
820 if [ -d "$(DOK_WEB)" ]; then \
821 $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
822 for i in user-manual developer-manual faq; do \
823 for ii in $(DOK_WEB)/$$i/*html; do \
824 $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
827 for i in $(DOK_WEB)/user-manual/*jpg; do \
828 $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
830 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
831 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
832 $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
833 $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
834 $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
835 $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
836 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
837 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
839 @# Not all platforms support gzipped man pages.
840 @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
841 -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
843 @# Change the config file default directories according to the configured ones
844 @$(ECHO) Rewriting config for this installation
845 @if [ -f config.base ] ; then \
846 $(CAT) config >config~ ;\
847 $(MV) config.base config ;\
849 $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
850 $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
851 -@if [ $(check_doc) = 0 ]; then \
852 $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
854 $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
856 $(MV) config config.base
857 $(MV) config.updated config
859 @# Install the config support files. Test for root install, and abort
860 @# if there is no privoxy user, and no other user was enabled during
861 @# configure. Later, install init script if appropriate.
862 @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
863 @for i in `find templates -type f`; do \
864 $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
867 @# FIXME: group/user validation is overly convoluted.
868 @# If superuser install ... we require a minimum of group ownership
869 @# of those files the daemon writes to, to be non-root owned.
870 @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
871 if [ x$(USER) = x ] || [ $(USER) = root ]; then \
872 if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
873 if [ "`$(ID) privoxy`" ] && \
874 $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
875 $(ECHO) "Warning: Setting group owner to privoxy";\
878 $(ECHO) "******************************************************************" ;\
879 $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
880 $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
881 $(ECHO) " and to install the config files as that user and/or group!" ;\
882 $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
883 $(ECHO) "*******************************************************************" ;\
889 INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
891 $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
892 INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
893 GROUP_T=$(GROUP_T) ;\
896 if [ ! "`id $(USER)`" = "`id`" ] ;then \
897 $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
898 $(ECHO) "Edit may fail." ;\
900 INSTALL_CONF="$(INSTALL_R)" ;\
902 $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
903 for i in $(CONFIGS); do \
904 if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
905 $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
906 $(ECHO) Installing fresh $$i;\
907 $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
908 elif [ -s "$(CONF_DEST)/$$i" ]; then \
909 $(ECHO) Installing $$i as $$i.new ;\
910 $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
913 $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
916 if [ -n "$$NEW" ]; then \
917 $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
918 $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
920 [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
921 $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
922 $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
923 if [ x$$USER != x ]; then \
924 $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
925 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
927 if [ x$$GROUP_T != x ]; then \
928 $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
929 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
931 $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
932 if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
933 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
934 $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
935 $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
936 $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
937 $(SED) 's+%USER%+$(USER)+' | \
938 $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
939 $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
940 $(ECHO) "Installing for Slackware." ;\
941 $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
942 elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
943 $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
944 $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
945 $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
948 $(ECHO) "No init script installed, install it manually if needed" ;\
950 $(RM) config.base config.tmp
952 @$(ECHO) "$(PROGRAM_V) installation succeeded!"
953 @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
955 # rmdir is used as a precaution since it will not remove non-empty
956 # directories. RH init script creates lock file and pid file.
957 uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
958 @$(ECHO) Starting Privoxy uninstallation
959 @# KILL privoxy if running
960 @# XXX: the chkconfig line may need a DESTDIR prefix.
961 -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
962 $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
963 -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
964 $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
967 @$(ECHO) Removing $(PROGRAM) binary
968 $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
970 @# config files and dir, and maybe old install backups
971 -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
972 $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
973 $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
974 cd $(DESTDIR)$(CONF_DEST) ;\
975 for i in $(DESTDIR)$(CONFIGS); do \
976 [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
979 @$(ECHO) Removing $(PROGRAM) config files
980 -@for i in $(DESTDIR)$(CONFIGS); do \
981 test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
982 $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
984 -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
985 $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
988 @$(ECHO) Removing $(PROGRAM) docs
989 -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
990 -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
993 @$(ECHO) Removing $(PROGRAM) logs
994 -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
996 @# Final clean up of unused directories. Special handling of CONF and LOG
998 @$(ECHO) Removing $(PROGRAM) directories
999 @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
1000 if test -d $$i; then \
1001 $(ECHO) Removing $$i ;\
1002 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1005 @if [ ! "$(prefix)" = "/usr/local" ] ;then \
1006 for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
1007 $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
1008 if test -d $$i; then \
1009 $(ECHO) Removing $$i ;\
1010 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1013 if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
1014 $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
1015 $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
1017 if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
1018 $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
1019 $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
1021 if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
1022 $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
1023 $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
1025 if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
1026 $(ECHO) Removing $(DESTDIR)$(prefix) ;\
1027 $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
1028 $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
1033 @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
1034 $(ECHO) Removing $(PROGRAM) init script ;\
1035 if [ -f $(DESTDIR)/etc/slackware-version ] && \
1036 [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
1037 $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
1038 elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
1039 $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
1041 $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
1044 @$(ECHO) Privoxy uninstalled, bye
1047 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
1048 -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
1049 -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
1050 -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
1051 -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
1052 -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
1053 -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat