1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.113 2002/07/30 21:50:25 hal9 Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
47 SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
50 #############################################################################
52 #############################################################################
54 DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src
55 DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre
56 DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
58 #############################################################################
59 # Directories for "make install"
60 #############################################################################
63 CONFDEST = @prefix@@sysconfdir@
64 SBIN_DEST = @prefix@@sbindir@
65 MAN_DEST = @prefix@@mandir@
66 DOK_WEB_USEM = doc/webserver/user-manual
68 #############################################################################
70 #############################################################################
72 PROGRAM = privoxy@EXEEXT@
77 INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
78 INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
79 INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
93 DOC_STATUS = @DOC_STATUS@
94 # Note: Please make sure that -d ldp.dsl\#html stays the last option to
95 # $(JADEBIN), because for some targets "-notoc" will be appended
96 # to it (--> "ldp.dsl\#html-notoc").
97 DB = $(JADEBIN) $(JADECAT) -i$(DOC_STATUS) -ihtml -t sgml -D.. -d ldp.dsl\#html
99 G2H_CMD = groff -mandoc -Thtml
103 DOC_TMP = $(DOC_DIR)/tmp
104 DKPREFIX = @DKPREFIX@
110 # Program to do LF->CRLF
112 # The sed version should be the most portable, but it doesn't work for me,
113 # the other two do. FIXME.
115 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
116 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
117 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
119 #############################################################################
120 # Setup for make distribution rh and suse for now
121 #############################################################################
123 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
124 RPM_BASE = @RPM_BASE@
126 #############################################################################
127 # We include these files in our distributions
128 #############################################################################
129 # take care that no CVS .cvsignore or other crappy files
131 # and escape every '#' in the find. doh.
132 CONFIG_FILES = config trust \
134 standard.action user.action \
136 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
138 DOC_FILES = AUTHORS LICENSE README ChangeLog \
139 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
140 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
141 `find doc/webserver/ -name "*.css"` \
144 #############################################################################
145 # Filenames and libraries
146 #############################################################################
149 $(DIR_PRIVOXY_SRC)/actions.c \
150 $(DIR_PRIVOXY_SRC)/cgi.c \
151 $(DIR_PRIVOXY_SRC)/cgiedit.c \
152 $(DIR_PRIVOXY_SRC)/cgisimple.c \
153 $(DIR_PRIVOXY_SRC)/deanimate.c \
154 $(DIR_PRIVOXY_SRC)/encode.c \
155 $(DIR_PRIVOXY_SRC)/errlog.c \
156 $(DIR_PRIVOXY_SRC)/filters.c \
157 $(DIR_PRIVOXY_SRC)/gateway.c \
158 $(DIR_PRIVOXY_SRC)/jbsockets.c \
159 $(DIR_PRIVOXY_SRC)/jcc.c \
160 $(DIR_PRIVOXY_SRC)/killpopup.c \
161 $(DIR_PRIVOXY_SRC)/list.c \
162 $(DIR_PRIVOXY_SRC)/loadcfg.c \
163 $(DIR_PRIVOXY_SRC)/loaders.c \
164 $(DIR_PRIVOXY_SRC)/miscutil.c \
165 $(DIR_PRIVOXY_SRC)/parsers.c \
166 $(DIR_PRIVOXY_SRC)/ssplit.c \
167 $(DIR_PRIVOXY_SRC)/urlmatch.c
169 C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
170 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
172 W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c
173 W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res
174 W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES)
175 W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h
176 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
177 W32_INIS = @WIN_ONLY@config.txt trust.txt
179 PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c
180 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
181 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
183 PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c
184 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
185 PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
187 # No REGEX (maybe because dynamically linked pcreposix):
189 @STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c
191 REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
192 REGEX_HDRS = $(REGEX_SRC:.c=.h)
194 # Dependencies introduced by #include "project.h".
195 PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h
197 # Socket libraries for platforms that need them explicitly defined
198 SOCKET_LIB = @SOCKET_LIB@
200 # PThreads library, if needed.
201 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
203 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
204 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
205 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
206 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
209 #############################################################################
211 #############################################################################
213 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
214 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
216 # The flag "-pthread" is required if using Pthreads under Linux (and
217 # possibly other OSs).
218 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
220 # Add your flags here
223 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
224 @STATIC_PCRE_ONLY@ -Ipcre
226 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
229 #############################################################################
232 # There should NOT be any targets above this line.
233 #############################################################################
234 all: $(PROGRAM) default.action
237 #############################################################################
239 #############################################################################
240 .PHONY: all inifiles redhat-dist redhat-upload redhat-test solaris-dist suse-dist \
241 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
242 install conectiva-spec conectiva-dist conectiva-upload debian-dist \
243 debian-upload ensure-wdump ensure-jadebin ensure-dkprefix
246 #############################################################################
248 #############################################################################
249 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ)
250 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
252 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ)
253 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
258 #############################################################################
259 # Strip master copy comments from default.action:
260 #############################################################################
261 default.action: default.action.master
262 $(GREP) -v '^#MASTER#' $< > $@
264 #############################################################################
266 #############################################################################
268 inifiles: $(W32_INIS)
271 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
272 -e 's!\jarfile jarfile!jarfile jar.log!' \
273 -e 's!\logfile logfile!logfile privoxy.log!' \
274 -e 's!#Win32-only: !!' \
277 # LF to CRLF in default.action
278 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
279 # LF to CRLF in default.filter
280 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
283 $(DOSFILTER) < $< > $@
285 #############################################################################
287 #############################################################################
289 @if [ -d CVS ]; then \
290 $(ECHO) "***************************************************"; \
292 $(ECHO) "*** WARNING ***"; \
294 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
295 $(ECHO) "*** that you are trying to build a distribution ***"; \
296 $(ECHO) "*** package based on a checked out, not an ***"; \
297 $(ECHO) "*** exported copy of the source tree. Please ***"; \
298 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
299 $(ECHO) "*** developer manual. ***"; \
301 $(ECHO) "***************************************************"; \
302 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
303 $(ECHO) -n "really want to proceed: "; \
305 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
309 #############################################################################
310 # RPM specifice stuff (SuSE or Redhat, ..)
311 #############################################################################
312 rpm-stuff: dist-check clean clobber
313 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
314 if [ ! -w $(RPM_BASE)/$$dir ]; then \
315 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
316 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
317 $(ECHO) "%_topdir /home/foo/rpm-build"; \
323 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
325 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
326 echo " No value given for RPM_PACKAGEV. Please use:"; \
327 echo " make dist-upload RPM_PACKAGEV=release"; \
328 echo " where \"release\" is the release number you want to and"; \
329 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
331 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
333 echo "ATTENTION: If your distribution use a specific tag on the"; \
334 echo " release field (like \"cl\" for Conectiva, and"; \
335 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
336 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
337 echo " Do it like you would do for a redhat package,"; \
338 echo " (i.e. just the number)."; \
344 #############################################################################
345 # Create Conectiva specfile from RedHat specfile
346 #############################################################################
348 $(RM) privoxy-cl.spec
349 chmod a+x genclspec.sh
352 #############################################################################
353 # Conectiva distribution for x86
354 #############################################################################
355 conectiva-dist: rpm-stuff conectiva-spec
357 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
358 $(RPM) --clean -ta $(TAR_ARCH)
359 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
361 conectiva-upload: check-release
362 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
364 #############################################################################
365 # redhat distribution alpha and x86
366 #############################################################################
367 redhat-dist: rpm-stuff
369 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
370 $(RPMBUILD) --clean -ta $(TAR_ARCH)
371 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
373 # For testing build issues only! Use redhat-dist for official releases.
376 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
377 $(RPMBUILD) --clean -tb $(TAR_ARCH)
378 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
379 @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
381 # anonymously ncftps the rpms to sourceforge
382 redhat-upload: check-release
383 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
384 # better should use `arch` here instead of ix86 to support other platforms too
385 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
386 @$(ECHO) -------------------------------------------------------
388 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
389 @$(ECHO) ... and release the files.
390 @$(ECHO) -------------------------------------------------------
391 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
393 #############################################################################
394 # suse distribution. works fine. no need to be root.
395 #############################################################################
397 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
398 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
399 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
400 # privoxy-suse.spec > $$TMPFILE ; then \
401 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
403 # $(ECHO) "Could not set version info in specfile."; \
407 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
408 $(RPM) --clean -ta $(TAR_ARCH)
409 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
411 # anonymously ncftps the rpms to sourceforge
412 suse-upload: check-release
413 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
414 # better should use `arch` here instead of ix86 to support other platforms too
415 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
416 @$(ECHO) -------------------------------------------------------
418 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
419 @$(ECHO) ... and release the files.
420 @$(ECHO) -------------------------------------------------------
422 # handle with care. use with root.
424 $(RPM) -e junkbuster-suse || true
425 $(RM) -r /etc/junkbuster
426 $(RM) -r /etc/rc.d/junkbuster*
427 $(RM) -r /var/run/junkbuster.pid
428 $(RM) -r /var/log/junkbuster
429 $(RM) /etc/init.d/junkbuster
430 $(RM) /usr/sbin/junkbuster
431 $(RM) /usr/sbin/rcjunkbuster
432 $(RM) /usr/share/man/man1/junkbuster.1.gz
433 $(RPM) -e privoxy-suse || true
434 $(RM) -r /etc/privoxy
435 $(RM) -r /etc/rc.d/privoxy*
436 $(RM) -r /var/run/privoxy.pid
437 $(RM) -r /var/log/privoxy
438 $(RM) /etc/init.d/privoxy
439 $(RM) /usr/sbin/privoxy
440 $(RM) /usr/sbin/rcprivoxy
441 $(RM) /usr/share/man/man1/privoxy.1.gz
444 #############################################################################
445 # generic distribution
446 #############################################################################
449 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
452 $(STRIP_PROG) $(PROGRAM)
453 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
455 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
457 for foo in $(CONFIG_FILES); do \
458 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
461 for foo in $(DOC_FILES); do \
462 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
464 # and zip the archive
465 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
466 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
467 @$(ECHO) Distribution with binary created.
469 # anonymously ncftps the package to sourceforge
471 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
472 @$(ECHO) -------------------------------------------------------
474 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
475 @$(ECHO) ... and release the files.
476 @$(ECHO) -------------------------------------------------------
480 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
482 #############################################################################
483 # solaris distribution. verified on SF machines by swa.
484 #############################################################################
485 solaris-dist: gen-dist
487 # anonymously ncftps the package to sourceforge
488 solaris-upload: gen-upload
491 solaris-clean: gen-clean
494 #############################################################################
496 #############################################################################
498 @$(ECHO) coming soon.
500 @$(ECHO) coming soon.
502 #############################################################################
503 # debian distribution
504 #############################################################################
506 @$(ECHO) Creating Debian package. Will exist in parent directory.
507 dpkg-buildpackage -rfakeroot -us -uc
509 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb
510 @$(ECHO) -------------------------------------------------------
512 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
513 @$(ECHO) ... and release the files.
514 @$(ECHO) -------------------------------------------------------
517 #############################################################################
518 # macosx distribution
519 #############################################################################
521 @$(ECHO) coming soon.
523 @$(ECHO) coming soon.
525 #############################################################################
527 #############################################################################
529 @$(ECHO) coming soon.
531 @$(ECHO) coming soon.
533 #############################################################################
534 # freebsd distribution. verified on SF machines by swa.
535 #############################################################################
536 freebsd-dist: gen-dist
538 # anonymously ncftps the package to sourceforge
539 freebsd-upload: gen-upload
542 freebsd-clean: gen-clean
545 #############################################################################
546 # Windows distribution
547 #############################################################################
549 @$(ECHO) RTFM. You shouldn't run configure before making
550 @$(ECHO) the Windows release, so you need to start again from
551 @$(ECHO) a clean CVS export.
555 #############################################################################
556 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
557 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
558 #############################################################################
560 tarball-dist: dist-check clean clobber
561 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
563 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
564 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
565 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
567 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
569 # and zip the archive
570 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
571 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
572 @$(ECHO) Tarball distribution created.
574 # anonymously ncftps the tarball to sourceforge
576 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
577 @$(ECHO) -------------------------------------------------------
579 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
580 @$(ECHO) ... and release the files.
581 @$(ECHO) -------------------------------------------------------
584 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
586 #############################################################################
590 # converts doc/source/*.sgml into html, text and man pages
592 #############################################################################
596 cd $(DOC_DIR) && $(MAKE)
598 #############################################################################
602 # moves dokumentation to webserver
604 #############################################################################
606 @$(ECHO) -------------------------------------------------------
607 @$(ECHO) You have run make dok/redhat-dok before, right?
608 @$(ECHO) Note that this command scps all stuff to the webserver,
609 @$(ECHO) it will not remove obsolete documents.
610 @$(ECHO) -------------------------------------------------------
614 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
615 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
617 @$(ECHO) Fixing permissions
618 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
619 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
620 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
625 @cd doc/webserver/actions; \
626 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
627 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
629 @$(ECHO) Fixing permissions
630 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
631 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
633 #############################################################################
634 # Source file dependencies
635 #############################################################################
637 $(DIR_PRIVOXY_OBJ)/actions.@OBJEXT@: $(DIR_PRIVOXY_SRC)/actions.c $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/actionlist.h
638 $(DIR_PRIVOXY_OBJ)/cgi.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgi.c $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
639 $(DIR_PRIVOXY_OBJ)/cgiedit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgiedit.c $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
640 $(DIR_PRIVOXY_OBJ)/cgisimple.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgisimple.c $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
641 $(DIR_PRIVOXY_OBJ)/deanimate.@OBJEXT@: $(DIR_PRIVOXY_SRC)/deanimate.c $(DIR_PRIVOXY_SRC)/deanimate.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS)
642 $(DIR_PRIVOXY_OBJ)/encode.@OBJEXT@: $(DIR_PRIVOXY_SRC)/encode.c $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/config.h
643 $(DIR_PRIVOXY_OBJ)/errlog.@OBJEXT@: $(DIR_PRIVOXY_SRC)/errlog.c $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h
644 $(DIR_PRIVOXY_OBJ)/filters.@OBJEXT@: $(DIR_PRIVOXY_SRC)/filters.c $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/deanimate.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/win32.h
645 $(DIR_PRIVOXY_OBJ)/gateway.@OBJEXT@: $(DIR_PRIVOXY_SRC)/gateway.c $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
646 $(DIR_PRIVOXY_OBJ)/jbsockets.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jbsockets.c $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/filters.h
647 $(DIR_PRIVOXY_OBJ)/jcc.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jcc.c $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/cgi.h
648 $(DIR_PRIVOXY_OBJ)/killpopup.@OBJEXT@: $(DIR_PRIVOXY_SRC)/killpopup.c $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
649 $(DIR_PRIVOXY_OBJ)/list.@OBJEXT@: $(DIR_PRIVOXY_SRC)/list.c $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/miscutil.h
650 $(DIR_PRIVOXY_OBJ)/loadcfg.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loadcfg.c $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h
651 $(DIR_PRIVOXY_OBJ)/loaders.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loaders.c $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h
652 $(DIR_PRIVOXY_OBJ)/miscutil.@OBJEXT@: $(DIR_PRIVOXY_SRC)/miscutil.c $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/config.h
653 $(DIR_PRIVOXY_OBJ)/parsers.@OBJEXT@: $(DIR_PRIVOXY_SRC)/parsers.c $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
654 $(DIR_PRIVOXY_OBJ)/ssplit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/ssplit.c $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/miscutil.h
655 $(DIR_PRIVOXY_OBJ)/urlmatch.@OBJEXT@: $(DIR_PRIVOXY_SRC)/urlmatch.c $(DIR_PRIVOXY_SRC)/urlmatch.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
658 $(DIR_PRIVOXY_OBJ)/pcrs.@OBJEXT@: $(DIR_PRIVOXY_SRC)/pcrs.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/config.h
661 $(DIR_PRIVOXY_OBJ)/get.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
662 $(DIR_PRIVOXY_OBJ)/maketables.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
663 $(DIR_PRIVOXY_OBJ)/pcre.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcre.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c
664 $(DIR_PRIVOXY_OBJ)/pcreposix.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
665 $(DIR_PRIVOXY_OBJ)/study.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
667 # An auxiliary program makes the PCRE default character table source
669 $(DIR_PRIVOXY_SRC_PCRE)/chartables.c: $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@
670 $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ >$(DIR_PRIVOXY_SRC_PCRE)/chartables.c
672 $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@: $(DIR_PRIVOXY_SRC_PCRE)/dftables.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/config.h
673 $(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
676 $(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
677 $(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
678 $(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h win32.h
680 $(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
681 $(DIR_PRIVOXY_SRC)/w32res.h \
682 $(DIR_PRIVOXY_SRC)/config.h \
683 $(DIR_PRIVOXY_SRC)/icons/ico00001.ico \
684 $(DIR_PRIVOXY_SRC)/icons/ico00002.ico \
685 $(DIR_PRIVOXY_SRC)/icons/ico00003.ico \
686 $(DIR_PRIVOXY_SRC)/icons/ico00004.ico \
687 $(DIR_PRIVOXY_SRC)/icons/ico00005.ico \
688 $(DIR_PRIVOXY_SRC)/icons/ico00006.ico \
689 $(DIR_PRIVOXY_SRC)/icons/ico00007.ico \
690 $(DIR_PRIVOXY_SRC)/icons/ico00008.ico \
691 $(DIR_PRIVOXY_SRC)/icons/idle.ico \
692 $(DIR_PRIVOXY_SRC)/icons/privoxy.ico
693 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
696 @AMIGAOS_ONLY@OBJS += $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@
697 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
698 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
699 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
700 $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@: $(DIR_PRIVOXY_SRC)/amiga.c $(DIR_PRIVOXY_SRC)/amiga.h $(DIR_PRIVOXY_SRC)/config.h
703 $(PROGRAM): $(OBJS) $(W32_FILES)
704 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
707 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) \
708 default.action `find . -name TAGS -o -name tags`
711 $(RM) `find . -name "*~"`
712 # $(RM) `find . -name "#*#"` # what is this for??
713 $(RM) `find . -name ".\#*"`
716 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
717 privoxy.log core *.tar.gz *.tar privoxy-cl.spec $(DOC_DIR)/ldp.dsl \
718 $(DOC_DIR)/GNUmakefile
721 # FIXME: What is all this?
723 $(RM) cscope.* *.pdb *.lib *.exp
727 tags: $(SRCS) $(HDRS)
728 etags $(SRCS) $(HDRS)
732 # FIXME: This is a dirty hack to have an install target
733 # that works at least for some setups. This needs
736 $(STRIP_PROG) $(PROGRAM)
737 $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
738 $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
739 $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
740 $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
741 $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
742 if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
743 $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
744 $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
745 # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
746 # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
747 $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
750 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
751 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
752 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
753 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
754 193,51,228,11,1,0,0);'|zcat
756 #############################################################################
762 # $Log: GNUmakefile.in,v $
763 # Revision 1.113 2002/07/30 21:50:25 hal9
764 # Add redhat-test target, and migrate the RPM_PACKAGEV stuff from 3.0 branch.
766 # Revision 1.112 2002/06/28 18:30:10 jongfoster
767 # Fixing bugs compiling PCRE
769 # Revision 1.111 2002/06/05 00:26:21 hal9
770 # Move all doc build stuff to doc/source/GNUmakefile, leaving a 'make dok'
771 # target only in toplevel. Add DOC_STATUS variable so docs can be built without
772 # touching sgml source.
774 # Revision 1.110 2002/06/04 14:51:48 jongfoster
775 # Updating for new paths:
776 # - Source files in src/
777 # - Object files in obj/
779 # Revision 1.109 2002/05/28 09:16:15 oes
780 # Added comment for -notoc kludge
782 # Revision 1.108 2002/05/28 03:56:08 hal9
783 # make dok-index target for privoxy-index.html. Fix *bak dead soldiers in
786 # Revision 1.107 2002/05/27 23:26:33 mal0rd
787 # Made doc-generation configuration automatic.
788 # References to DB2HTML were removed, not used.
789 # --with-docbook now only needed if in odd path.
791 # Revision 1.106 2002/05/26 04:55:11 mal0rd
792 # Added debian-dist and debian-upload targets. Also documented usage.
794 # Revision 1.105 2002/05/25 22:48:19 hal9
795 # Add -notoc to README build (per oes's dsl magic).
797 # Revision 1.104 2002/05/24 00:03:49 oes
798 # Use p_doc.css for the Homepage for consistency
800 # Revision 1.103 2002/05/23 23:19:00 oes
801 # Use dsl without TOC for the homepage
803 # Revision 1.102 2002/05/16 01:20:17 hal9
804 # make announce target added.
806 # Revision 1.101 2002/05/15 12:28:46 oes
807 # Trying to keep Hal happy :)
809 # Revision 1.100 2002/05/08 13:48:18 hal9
810 # Ooops, that trashed JB v2.0.2 comment. Fixed.
812 # Revision 1.99 2002/05/08 13:42:07 hal9
813 # This fixes the numbering problem on index.html in contact info section (.1.). Using
814 # perl, since its way too convoluted to try to fix proper with docbook.
816 # Revision 1.98 2002/05/03 14:33:06 oes
817 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
819 # Revision 1.97 2002/04/27 20:27:43 swa
820 # no longer needed due to new
821 # PACKAGE_VERSION process
823 # Revision 1.96 2002/04/27 17:44:32 morcego
824 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
825 # - Using the RM macro everywhere rm is called (either we use, or don't)
828 # Revision 1.95 2002/04/27 15:37:25 swa
829 # replacing directory in document creation process
830 # no longer necessary.
832 # Revision 1.94 2002/04/27 08:23:29 swa
833 # pdf process reviewed and cleaned up
835 # Revision 1.93 2002/04/27 04:55:53 morcego
836 # privoxy-cl.spec now gets removed by clobber target
838 # Revision 1.92 2002/04/27 04:53:40 morcego
839 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
842 # Revision 1.91 2002/04/27 04:44:51 morcego
843 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
844 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
845 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
847 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
848 # for Conectiva Linux
850 # Revision 1.90 2002/04/26 17:46:53 swa
853 # Revision 1.89 2002/04/26 17:20:54 swa
854 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
856 # Revision 1.88 2002/04/25 19:13:57 morcego
857 # Removed RPM release number declaration on configure.in
858 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
859 # targets (will produce an error, explaining who to do it, if no value
862 # Revision 1.87 2002/04/23 14:10:59 swa
863 # now create pdf documents
865 # Revision 1.86 2002/04/15 04:30:27 hal9
866 # Missed two -pi.bak's on perl/cygwin problem.
868 # Revision 1.85 2002/04/14 01:05:34 hal9
869 # Revert dok-webserver change for SF logo.
871 # Revision 1.84 2002/04/13 22:43:25 hal9
872 # -Fix dok-webserver for SF logo (more perl).
873 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
875 # Revision 1.83 2002/04/12 09:39:25 oes
876 # Excluding yet more files from tarball; making dist warning yet more scary
878 # Revision 1.82 2002/04/11 21:07:11 oes
879 # Excluding more files from tarball build
881 # Revision 1.81 2002/04/11 14:40:27 oes
882 # Fixed typo -- Thanks, Moritz!
884 # Revision 1.80 2002/04/11 12:50:00 oes
885 # Fixed tarball-dist target
887 # Revision 1.79 2002/04/11 06:49:28 oes
888 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
890 # Revision 1.78 2002/04/09 13:37:11 sarantis
891 # fix tar options typo
893 # Revision 1.77 2002/04/09 13:28:53 swa
894 # build suse and gen-dist with html docs
896 # Revision 1.76 2002/04/08 22:43:41 oes
897 # Fix: Include dotfiles in fixing webserver permissions
899 # Revision 1.75 2002/04/08 22:14:59 oes
900 # Silencing tar warnings in the web* targets
902 # Revision 1.74 2002/04/08 15:22:44 hal9
903 # This has finishing touches for dok building. Should be ready to go.
904 # -The main doc build is now 'make dok', should work on Redhat too.
905 # -Removed man page from main doc build. It is built separately due to
906 # perl scripts that most aren't likely to have.
908 # Revision 1.73 2002/04/08 14:03:24 oes
909 # oes for al: Fix install target
911 # Revision 1.72 2002/04/08 13:42:11 oes
912 # Added safety check to *-dist targets; fixed permissions for feedback logfile
914 # Revision 1.71 2002/04/07 20:32:03 hal9
915 # -Add meta data kludge for make dok-webserver via $(PERL).
916 # -Add subdirs for 'make dok-release'.
918 # Revision 1.70 2002/04/07 08:59:40 swa
919 # generated files. do NOT edit.
920 # fixed directory bug in makefile.
922 # Revision 1.69 2002/04/07 08:10:47 swa
923 # create some of the webserver docs
924 # automatically (in particular if
925 # those docs recycle other documentation
926 # fragments). Now committed webserver's
929 # Revision 1.68 2002/04/07 07:58:11 swa
930 # create some of the webserver docs
931 # automatically (in particular if
932 # those docs recycle other documentation
935 # Revision 1.67 2002/04/07 05:31:42 hal9
936 # Add 'dok-release' target:
937 # -Set doc entities to VERSION and CODE_STATUS during make.
938 # -Set doc conditional content flags (stable vs non-stable).
939 # A separate target for the time being but needs to be incorporated into
940 # dok build at some point.
941 # -Filter out a spurious ^G from new man page > html converion in man2html.
943 # Revision 1.66 2002/04/06 20:28:21 jongfoster
944 # Prettifying groff2html.
945 # Using GNU Make's conditional makefile feature rather than shell "if"s.
946 # (The shell "if"s were hiding errors)
947 # "perl" -> "$(PERL)"
948 # Spaces->tabs in a couple of places.
950 # Revision 1.65 2002/04/06 05:16:39 hal9
951 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
952 # -Both of these will soon be generated files.
954 # Revision 1.64 2002/04/04 22:14:51 oes
955 # No longer rely on find honoring -iname
957 # Revision 1.63 2002/04/04 21:06:22 swa
960 # Revision 1.62 2002/04/04 20:49:50 swa
961 # attempt to consolidate the
962 # different dokbook versions.
964 # Revision 1.61 2002/04/04 19:18:21 swa
965 # readme was leftover directory. use w3m instead
966 # of lynx to be consistent among developers. use
967 # consistent target naming.
969 # Revision 1.60 2002/04/04 12:25:41 oes
970 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
972 # Revision 1.59 2002/04/04 08:32:45 swa
973 # wrong name for tarball-dist target. further fixed content of tarball dist
975 # Revision 1.58 2002/04/04 06:32:58 hal9
976 # New dok targets for make readme.
978 # Revision 1.57 2002/04/04 00:36:36 gliptak
979 # always use pcre for matching
981 # Revision 1.56 2002/04/03 22:28:03 gliptak
982 # Removed references to gnu_regex
984 # Revision 1.55 2002/04/03 19:54:29 swa
985 # freebsd tested to work. attempt to move tarball dist target forward
987 # Revision 1.54 2002/04/03 14:54:07 oes
988 # Standard clean and clobber semantics II
990 # Revision 1.53 2002/04/03 14:19:16 oes
991 # Standard clean and clobber semantics
993 # Revision 1.52 2002/04/03 02:56:18 hal9
994 # Revert previous FAQ numbering kludge.
996 # Revision 1.51 2002/04/02 13:03:56 oes
997 # Added fix for webserver permissions
999 # Revision 1.50 2002/04/02 03:46:24 hal9
1000 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1001 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1003 # Revision 1.49 2002/03/30 22:20:12 swa
1004 # cd didn't work. neither did find.
1006 # Revision 1.48 2002/03/30 19:04:06 swa
1007 # people release differently. no good.
1008 # I want to make parts of the docs only.
1010 # Revision 1.47 2002/03/30 09:05:21 swa
1011 # better packaging. better rpm building.
1012 # tar failed on sun (no exclude there).
1014 # Revision 1.46 2002/03/29 20:09:01 swa
1017 # Revision 1.45 2002/03/29 19:45:45 swa
1020 # Revision 1.44 2002/03/29 17:42:44 gliptak
1021 # Correcting for Solaris tar limitations
1023 # Revision 1.43 2002/03/29 07:40:03 swa
1024 # fixed make webserver. doh
1026 # Revision 1.42 2002/03/29 06:59:04 swa
1027 # other users could not modify files on webserver
1029 # Revision 1.41 2002/03/28 20:43:00 swa
1030 # set make correctly
1032 # Revision 1.40 2002/03/28 04:22:44 hal9
1033 # More on man2html stuff.
1035 # Revision 1.39 2002/03/28 01:04:14 hal9
1036 # More man2html stuff for docs.
1038 # Revision 1.38 2002/03/27 16:02:30 swa
1039 # have a generic target
1041 # Revision 1.37 2002/03/27 15:30:26 swa
1042 # have a consistent appearance
1044 # Revision 1.36 2002/03/27 14:58:08 swa
1045 # can be used by mutilple targets
1047 # Revision 1.35 2002/03/27 14:53:19 swa
1048 # added solaris-dist
1050 # Revision 1.34 2002/03/27 10:30:11 swa
1051 # we want a html man file on the webserver
1053 # Revision 1.33 2002/03/27 03:05:35 hal9
1054 # Added man2html target for docs (redhat-dok only for now)
1056 # Revision 1.32 2002/03/26 22:29:54 swa
1057 # we have a new homepage!
1059 # Revision 1.31 2002/03/26 14:00:18 swa
1060 # fixed make tarball, tarball-dist, tarball-clean
1062 # Revision 1.30 2002/03/25 12:52:25 swa
1065 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1068 # Revision 1.28 2002/03/24 16:19:48 swa
1069 # configure needs to be generated.
1071 # Revision 1.27 2002/03/24 16:13:57 swa
1072 # generated files are a nono in cvs
1074 # Revision 1.26 2002/03/24 15:36:02 swa
1077 # Revision 1.25 2002/03/24 14:31:08 swa
1078 # remove more crappy files. set RPM
1079 # release version correctly.
1081 # Revision 1.24 2002/03/24 14:19:55 swa
1082 # set rpm package release in configure.in. nowhere else.
1084 # Revision 1.23 2002/03/24 13:06:49 swa
1085 # suse-clean now runs fine
1087 # Revision 1.22 2002/03/24 12:56:21 swa
1088 # name change related issues.
1090 # Revision 1.21 2002/03/24 12:43:57 swa
1093 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1094 # Renaming config files
1096 # Revision 1.19 2002/03/22 20:53:03 morcego
1097 # - Ongoing process to change name to JunkbusterNG
1098 # - configure/configure.in: no change needed
1100 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1101 # - PROGRAM = jbng@EXEEXT@
1102 # - rh-spec now references as junkbusterng-rh.spec
1103 # - redhat-upload: references changed to junkbusterng-* (package names)
1104 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1105 # - tarball-src: now JunkbusterNG-*
1106 # - install: initscript now junkbusterng.init and junkbusterng (when
1108 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1109 # - junkbusterng.spec:
1110 # - References to the expression ijb where changed where possible
1111 # - New package name: junkbusterng (all in lower case, acording to
1112 # the LSB recomendation)
1113 # - Version changed to: 2.9.13
1115 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1116 # right. If it obsoletes, why conflict ? Have to check it later)
1117 # - Summary changed: Stefan, please check and aprove it
1118 # - Changes description to use the new name
1119 # - Sed string was NOT changed. Have to wait to the manpage to
1121 # - Keeping the user junkbuster for now. It will require some aditional
1122 # changes on the script (scheduled for the next specfile release)
1123 # - Added post entry to move the old logfile to the new log directory
1124 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1125 # added to the startup list).
1126 # - Added preun section to stop the service with the old name, as well
1127 # as remove it from the startup list
1128 # - Removed the chkconfig --del entry from the conditional block on
1129 # the preun scriptlet (now handled on the %files section)
1130 # - junkbuster.init: renamed to junkbusterng.init
1131 # - junkbusterng.init:
1132 # - Changed JB_BIN to jbng
1133 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1134 # be used where necessary (config dir)
1137 # - The config directory is /etc/junkbuster yet. Have to change it on the
1138 # specfile, after it is changes on the code
1139 # - The only files that got renamed on the cvs tree were the rh specfile and
1140 # the init file. Some file references got changes on the makefile and on the
1141 # rh-spec (as listed above)
1143 # Revision 1.18 2002/03/21 23:00:00 swa
1144 # want to autogenerate stuff.
1146 # Revision 1.17 2002/03/19 19:30:04 morcego
1147 # - Fixing stylesheet checking on configure. If it is found, no further checks
1150 # - configure will now check for db2html or docbook2html (should work now
1151 # on SuSe without the docbktls package)
1153 # Revision 1.16 2002/03/14 22:32:32 hal9
1154 # Bumped the RPM version.
1156 # Revision 1.15 2002/03/08 20:00:28 swa
1159 # Revision 1.14 2002/03/07 18:25:56 swa
1160 # synced redhat and suse build process
1162 # Revision 1.13 2002/03/07 17:17:56 oes
1163 # (Hopefully) fixed for older make versions
1165 # Revision 1.12 2002/03/07 15:28:27 swa
1168 # Revision 1.11 2002/03/06 14:33:18 sarantis
1169 # Use proper temp file, not "abc".
1171 # Revision 1.10 2002/03/06 14:19:35 sarantis
1172 # Cleanup PID_FILE_PATH from redhat-dist target
1174 # Revision 1.9 2002/03/05 17:31:11 morcego
1175 # Search for docbook.dsl. Should solve portability problems for SuSe.
1177 # Revision 1.8 2002/03/05 14:07:42 morcego
1178 # configure now detects rpm topdir, and change GNUmakefile acordingly
1179 # (based on sugestion by Sarantis Paskalis)
1181 # Revision 1.7 2002/03/05 13:43:28 morcego
1182 # Checking for text browser, so redhat-dok can work.
1184 # Revision 1.6 2002/03/05 13:10:51 morcego
1185 # Changes to implement redhat-dok (Hal Burgiss)
1186 # Changes to make it work on other distros and out-of-the-shelf configurations
1188 # Revision 1.5 2002/02/27 15:30:39 hal9
1189 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1191 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1192 # Adding urlmatch.[ch]
1194 # Revision 1.3 2002/01/04 15:26:08 oes
1195 # Added tarball-src target
1197 # Revision 1.2 2001/12/30 14:07:31 steudten
1198 # - Add signal handling (unix)
1199 # - Add SIGHUP handler (unix)
1200 # - Add creation of pidfile (unix)
1201 # - Add action 'top' in rc file (RH)
1202 # - Add entry 'SIGNALS' to manpage
1203 # - Add exit message to logfile (unix)
1205 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1206 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1207 # make break in a more obvious way.
1208 # Adding .PHONY section.
1210 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1211 # Renaming various config files
1212 # Fixing CR->CRLF under Win32 (I hope)
1214 # Revision 1.39 2001/11/06 12:07:30 steudten
1215 # Add --clean for building rpm in target redhat-dist.
1217 # Revision 1.38 2001/11/05 21:35:23 steudten
1218 # Complete rewrite for the 'redhat-dist' target.
1219 # Checks for writeable RPM build directories for calling user.
1220 # So you must not be root, just set the modes to 1777 to
1221 # build a RH package.
1222 # Fix the upload-target to be arch independant.
1223 # Add target for 'solaris-dist' - coming soon.
1225 # Revision 1.37 2001/11/01 00:52:04 hal9
1226 # Redhat-upload stuff per Stefan.
1228 # Revision 1.36 2001/10/31 19:26:13 swa
1229 # automate process of uploading new releases
1232 # Revision 1.35 2001/10/15 22:14:59 joergs
1233 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1234 # the general CFLAGS already.
1236 # Revision 1.34 2001/10/15 18:28:06 steudten
1237 # remove config.cache for target clobber.
1238 # Cleanup make dist for RH and S.u.S.E.
1240 # Revision 1.33 2001/10/10 12:43:33 oes
1241 # Added ugly hack to make install target work at least for some setups.
1243 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1244 # Correcting actionsfile filename for Win32 INI build
1246 # Revision 1.31 2001/09/23 10:13:48 swa
1247 # upload process established. run make webserver and
1248 # the documentation is moved to the webserver. documents
1249 # are now linked correctly.
1251 # Revision 1.30 2001/09/19 17:55:49 oes
1254 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1255 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1256 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1257 # of build problems.
1259 # Revision 1.28 2001/09/13 15:19:08 swa
1260 # we want text files as well.
1262 # Revision 1.27 2001/09/13 13:11:37 steudten
1264 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1266 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1267 # Mac OSX (Darwin) support added.
1269 # Revision 1.25 2001/09/12 22:55:45 joergs
1270 # AmigaOS support added.
1272 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1274 # OS/2 port: update autoconf'd support for the platform.
1276 # Revision 1.23 2001/09/12 16:28:42 swa
1277 # added "make dok" section to generate html pages from
1278 # the sgml source documents. note that the we do not want
1279 # generated stuff in cvs.
1281 # Revision 1.22 2001/09/10 16:31:23 swa
1282 # buildroot definition in the specfile fucks up the build
1283 # process under suse. hence I moved it to the "rpm -ta"
1286 # Revision 1.21 2001/09/10 11:12:49 oes
1289 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1290 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1292 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1293 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1295 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1296 # Major changes to build system in order to fix these bugs:
1297 # - pthreads under Linux was broken - changed -lpthread to -pthread
1298 # - Compiling in MinGW32 mode under CygWin now correctly detects
1299 # which shared libraries are available
1300 # - Solaris support (?) (Not tested under Solaris yet)
1302 # Revision 1.17 2001/07/28 16:44:54 oes
1303 # Fixed sed LF->CRLF conversion and removed deprecated files
1305 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1306 # Added support for linking with POSIX threads library
1308 # Revision 1.15 2001/07/13 13:48:07 oes
1309 # - Moved STATIC #define for pcre to (ac)config.h
1310 # - Made -Ipcre depandant on static pcre compilation to
1311 # avoid version conflicts
1312 # - Included compilation and depandancies for new deanimate.c
1313 # - Made changes to the pcre/pcreposix/pcrs build process
1314 # as required by the new library autodetection in
1317 # Revision 1.14 2001/07/01 16:27:44 oes
1318 # Fixed misplaced dependancy
1320 # Revision 1.13 2001/06/29 13:18:36 oes
1321 # - added depandancy of filters.o on cgi.h
1323 # Revision 1.12 2001/06/12 17:15:56 swa
1324 # fixes, because a clean build on rh6.1 was impossible.
1325 # GZIP confuses make, %configure confuses rpm, etc.
1327 # Revision 1.11 2001/06/11 11:26:35 sarantis
1328 # RPM version should be the same as ijbswa version. The rpm release is
1329 # specified in the specfile.
1331 # Revision 1.10 2001/06/07 17:27:45 swa
1332 # added suse build section
1334 # Revision 1.9 2001/06/04 18:31:58 swa
1335 # files are now prefixed with either `confdir' or `logdir'.
1336 # `make redhat-dist' replaces both entries confdir and logdir
1337 # with redhat values
1339 # Revision 1.8 2001/06/04 10:44:57 swa
1340 # `make redhatr-dist' now works. Except for the paths
1341 # in the config file.
1343 # Revision 1.7 2001/06/03 17:09:09 swa
1344 # swa for oes: reversed my earlier change
1346 # Revision 1.6 2001/06/03 17:07:27 swa
1349 # Revision 1.5 2001/06/03 13:57:26 swa
1350 # compile cgi.c (for andreas' GUI)
1352 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1353 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1355 # Revision 1.3 2001/05/29 20:02:48 joergs
1356 # Changes for AmigaOS added.
1358 # Revision 1.2 2001/05/17 22:23:23 oes
1359 # - Added auto-generation of CRLFs for Win32 config files
1360 # - Added comment-prefix to all Win32-only options in the config file
1361 # and provided auto stripping of this prefix for the Win32 platform by make
1363 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1364 # Initial import of version 2.9.3 source tree