3 # This is file /etc/rc.d/init.d/privoxy and was put here
8 # description: This shell script takes care of starting and stopping \
12 # ********************************************************************
14 # File : $Source: /cvsroot/ijbswa/current/privoxy.init,v $
16 # Purpose : This shell script takes care of starting and stopping
19 # Copyright : Written by and Copyright (C) 2001 the SourceForge
20 # Privoxy team. http://www.privoxy.org/
22 # Based on the Internet Junkbuster originally written
23 # by and Copyright (C) 1997 Anonymous Coders and
24 # Junkbusters Corporation. http://www.junkbusters.com
26 # This program is free software; you can redistribute it
27 # and/or modify it under the terms of the GNU General
28 # Public License as published by the Free Software
29 # Foundation; either version 2 of the License, or (at
30 # your option) any later version.
32 # This program is distributed in the hope that it will
33 # be useful, but WITHOUT ANY WARRANTY; without even the
34 # implied warranty of MERCHANTABILITY or FITNESS FOR A
35 # PARTICULAR PURPOSE. See the GNU General Public
36 # License for more details.
38 # The GNU General Public License should be included with
39 # this file. If not, you can view it at
40 # http://www.gnu.org/copyleft/gpl.html
41 # or write to the Free Software Foundation, Inc., 59
42 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
45 # $Log: privoxy.init,v $
46 # Revision 1.7 2002/04/08 14:54:51 morcego
47 # Moved the chkconfig comments to the begining of the file, couse Linuxconf
48 # was getting confused with it where it was.
50 # Revision 1.6 2002/03/26 22:29:55 swa
51 # we have a new homepage!
53 # Revision 1.5 2002/03/25 06:14:18 morcego
54 # Removing the OPRG definition (no longer needed)
56 # Revision 1.4 2002/03/25 04:16:48 hal9
57 # Fix proper config file location.
59 # Revision 1.3 2002/03/24 19:12:15 hal9
60 # Fixed some naming conflicts.
62 # Revision 1.2 2002/03/24 11:40:14 swa
65 # Revision 1.1 2002/03/24 11:23:44 swa
68 # Revision 1.1 2002/03/22 20:53:03 morcego
69 # - Ongoing process to change name to JunkbusterNG
70 # - configure/configure.in: no change needed
72 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
73 # - PROGRAM = jbng@EXEEXT@
74 # - rh-spec now references as junkbusterng-rh.spec
75 # - redhat-upload: references changed to junkbusterng-* (package names)
76 # - tarball-dist: references changed to JunkbusterNG-distribution-*
77 # - tarball-src: now JunkbusterNG-*
78 # - install: initscript now junkbusterng.init and junkbusterng (when
80 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
81 # - junkbusterng.spec:
82 # - References to the expression ijb where changed where possible
83 # - New package name: junkbusterng (all in lower case, acording to
84 # the LSB recomendation)
85 # - Version changed to: 2.9.13
87 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
88 # right. If it obsoletes, why conflict ? Have to check it later)
89 # - Summary changed: Stefan, please check and aprove it
90 # - Changes description to use the new name
91 # - Sed string was NOT changed. Have to wait to the manpage to
93 # - Keeping the user junkbuster for now. It will require some aditional
94 # changes on the script (scheduled for the next specfile release)
95 # - Added post entry to move the old logfile to the new log directory
96 # - Removing "chkconfig --add" entry (not good to have it automaticaly
97 # added to the startup list).
98 # - Added preun section to stop the service with the old name, as well
99 # as remove it from the startup list
100 # - Removed the chkconfig --del entry from the conditional block on
101 # the preun scriptlet (now handled on the %files section)
102 # - junkbuster.init: renamed to junkbusterng.init
103 # - junkbusterng.init:
104 # - Changed JB_BIN to jbng
105 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
106 # be used where necessary (config dir)
109 # - The config directory is /etc/junkbuster yet. Have to change it on the
110 # specfile, after it is changes on the code
111 # - The only files that got renamed on the cvs tree were the rh specfile and
112 # the init file. Some file references got changes on the makefile and on the
113 # rh-spec (as listed above)
115 # Revision 1.15 2002/03/09 15:05:58 swa
118 # Revision 1.14 2002/03/06 06:13:40 hal9
119 # Adapted for Andreas' changes for --user and --pidfile.
121 # Revision 1.13 2002/03/05 05:10:10 oes
122 # Changed pidfile path to conform with FHS
124 # Revision 1.12 2002/03/04 20:44:36 oes
125 # Changed to new cmdline syntax
127 # Revision 1.11 2001/12/30 14:07:32 steudten
128 # - Add signal handling (unix)
129 # - Add SIGHUP handler (unix)
130 # - Add creation of pidfile (unix)
131 # - Add action 'top' in rc file (RH)
132 # - Add entry 'SIGNALS' to manpage
133 # - Add exit message to logfile (unix)
135 # Revision 1.10 2001/11/05 21:30:23 steudten
136 # Make JB startup without & due to be a 'real' daemon right now.
137 # Make the script easy to change.
139 # Revision 1.9 2001/09/15 01:53:12 steudten
141 # Remove test for subsys flag in start. Some minor changes.
143 # Revision 1.8 2001/06/28 13:50:36 sarantis
144 # swap ?$ with $?; remove bogus ";;"
146 # Revision 1.7 2001/06/28 13:40:26 sarantis
147 # remove single quotes from $JB; it was not expanded.
149 # Revision 1.6 2001/06/28 13:38:42 sarantis
150 # formatting changes; individual return values are returned from the init script.
152 # Revision 1.5 2001/06/11 11:37:40 sarantis
153 # Minor editing changes.
155 # Revision 1.4 2001/06/09 09:14:11 swa
156 # shamelessly adapted RPM stuff from the newest rpm that
157 # RedHat provided for the JB.
159 # Revision 1.3 2001/05/25 10:12:44 oes
160 # Fixed default case in switch statement (# -> *)
162 # Revision 1.2 2001/05/24 07:52:24 swa
163 # added header. removed ^M.
166 # ********************************************************************/
169 # Source function library.
170 . /etc/rc.d/init.d/functions
172 . /etc/sysconfig/network
174 # Check that networking is up.
175 [ ${NETWORKING} = "no" ] && exit 0
177 PRIVOXY_PRG="privoxy"
178 PRIVOXY_BIN="/usr/sbin/$PRIVOXY_PRG"
179 PRIVOXY_CONF="/etc/$PRIVOXY_PRG/config"
180 PRIVOXY_USER="privoxy"
181 PRIVOXY_PID=/var/run/$PRIVOXY_PRG.pid
182 PRIVOXY_LOCK=/var/lock/subsys/$PRIVOXY_PRG
183 PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER.$PRIVOXY_USER --pidfile $PRIVOXY_PID $PRIVOXY_CONF"
186 ! [ -x $PRIVOXY_BIN ] && echo "Can't find $PRIVOXY_BIN, exit." && exit 0
187 ! [ -f $PRIVOXY_CONF ] && echo "Can't find $PRIVOXY_CONF, exit." && exit 0
189 # See how we were called.
193 echo -n $"Starting $PRIVOXY_PRG: "
194 if [ -f $PRIVOXY_PID ]; then
195 killproc $PRIVOXY_PRG && rm -f $PRIVOXY_LOCK $PRIVOXY_PID
197 [ $RETVAL != 0 ] && return $RETVAL
202 [ $RETVAL = 0 ] && touch $PRIVOXY_LOCK
208 echo -n $"Stopping $PRIVOXY_PRG: "
209 killproc $PRIVOXY_PRG && rm -f $PRIVOXY_LOCK $PRIVOXY_PID
223 if [ -f $PRIVOXY_PID ] ; then
224 kill -HUP `cat $PRIVOXY_PID`
234 # restart only if already running
235 if [ -f $PRIVOXY_PID ] ; then
246 if [ -f $PRIVOXY_PID ]; then
248 for i in `pidof $PRIVOXY_PRG` ; do
255 echo $"Usage: $PRIVOXY_PRG {start|stop|reload|restart|condrestart|status|top}"