1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.104.2.7 2002/06/07 00:23:47 hal9 Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
46 RPM_PACKAGEV = $(RPM_VERSION)
47 SNAPVERSION = $(RPM_PACKAGEV)-$(shell date "+%Y%m%d")
50 #############################################################################
51 # Directories for "make install"
52 #############################################################################
55 CONFDEST = @prefix@@sysconfdir@
56 SBIN_DEST = @prefix@@sbindir@
57 MAN_DEST = @prefix@@mandir@
58 DOK_WEB_USEM=doc/webserver/user-manual
60 #############################################################################
62 #############################################################################
64 PROGRAM = privoxy@EXEEXT@
70 INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
71 INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
72 INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
86 DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
89 G2H_CMD = groff -mandoc -Thtml
93 DOC_TMP = $(DOC_DIR)/tmp
94 DOC_STATUS = @DOC_STATUS@
100 # Program to do LF->CRLF
102 # The sed version should be the most portable, but it doesn't for for me,
103 # the other two do. FIXME.
105 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
106 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
107 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
108 CVSROOT = :pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa
109 TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
111 #############################################################################
112 # Setup for make distribution rh and suse for now
113 #############################################################################
115 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
116 RPM_BASE = @RPM_BASE@
118 #############################################################################
119 # We include these files in our distributions
120 #############################################################################
121 # take care that no CVS .cvsignore or other crappy files
123 # and escape every '#' in the find. doh.
124 CONFIG_FILES = config trust \
126 standard.action user.action \
128 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
130 DOC_FILES = AUTHORS LICENSE README ChangeLog \
131 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
132 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
133 `find doc/webserver/ -name "*.css"` \
136 #############################################################################
137 # Filenames and libraries
138 #############################################################################
140 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
141 errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
142 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
145 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
146 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
148 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
149 W32_FILES = @WIN_ONLY@w32.res
150 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
151 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
152 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
153 W32_INIS = @WIN_ONLY@config.txt trust.txt
155 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
156 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
157 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
159 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
160 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
161 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
163 # No REGEX (maybe because dynamically linked pcreposix):
165 @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
167 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
168 REGEX_HDRS = $(REGEX_SRC:.c=.h)
170 # Dependencies introduced by #include "project.h".
171 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
173 # Socket libraries for platforms that need them explicitly defined
174 SOCKET_LIB = @SOCKET_LIB@
176 # PThreads library, if needed.
177 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
179 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
180 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
181 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
182 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
185 #############################################################################
187 #############################################################################
189 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
190 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
192 # The flag "-pthread" is required if using Pthreads under Linux (and
193 # possibly other OSs).
194 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
196 # Add your flags here
199 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
200 @STATIC_PCRE_ONLY@ -Ipcre
202 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
205 #############################################################################
208 # There should NOT be any targets above this line.
209 #############################################################################
213 #############################################################################
215 #############################################################################
216 .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
217 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
218 install conectiva-spec conectiva-dist conectiva-upload
221 #############################################################################
222 # Define this explicitly because Solaris is broken!
223 #############################################################################
225 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
228 #############################################################################
230 #############################################################################
232 inifiles: $(W32_INIS)
235 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
236 -e 's!\jarfile jarfile!jarfile jar.log!' \
237 -e 's!\logfile logfile!logfile privoxy.log!' \
238 -e 's!#Win32-only: !!' \
241 # LF to CRLF in default.action
242 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
243 # LF to CRLF in default.filter
244 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
247 $(DOSFILTER) < $< > $@
249 re_filterfile.txt: re_filterfile
250 $(DOSFILTER) < $< > $@
253 #############################################################################
255 #############################################################################
257 @if [ -d CVS ]; then \
258 $(ECHO) "***************************************************"; \
260 $(ECHO) "*** WARNING ***"; \
262 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
263 $(ECHO) "*** that you are trying to build a distribution ***"; \
264 $(ECHO) "*** package based on a checked out, not an ***"; \
265 $(ECHO) "*** exported copy of the source tree. Please ***"; \
266 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
267 $(ECHO) "*** developer manual. ***"; \
269 $(ECHO) "***************************************************"; \
270 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
271 $(ECHO) -n "really want to proceed: "; \
273 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
277 #############################################################################
278 # create tar.gz from CVS:
279 # This make-target is usually called through 'create-archive'. If you
280 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
281 # tar.gz with the current date in the name and as a releasenumber in the
282 # spec-file. But the main usage is to run it as follows (Red Hat example):
283 # make SNAPVERSION=1.6x create-snapshot
284 # This creates a tar.gz and spec-file for a Red Hat 6.x version.
285 #############################################################################
287 @tag=`cvs status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
288 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
289 echo "*** Creating package from $$tag!"; \
290 cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."
291 @$(MV) $(TMPDIR)/current $(TMPDIR)/$(PROGRAM)-$(VERSION); \
292 cd $(TMPDIR)/$(PROGRAM)-$(VERSION); \
293 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
294 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
295 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
296 privoxy-rh.spec > $$TMPFILE ; then \
297 $(MV) -f $$TMPFILE privoxy-rh.spec; \
299 $(ECHO) "Could not set version info in specfile."; \
302 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
303 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
304 privoxy-suse.spec > $$TMPFILE ; then \
305 $(MV) -f $$TMPFILE privoxy-suse.spec; \
307 $(ECHO) "Could not set version info in specfile."; \
312 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
313 "privoxy-suse.spec" -czf $(PROGRAM)-rh-$(VERSION).tar.gz \
314 $(PROGRAM)-$(VERSION); \
315 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
316 "privoxy-rh.spec" -czf $(PROGRAM)-suse-$(VERSION).tar.gz \
317 $(PROGRAM)-$(VERSION);
318 @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .
319 @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
321 @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and"
322 @echo " $(PROGRAM)-suse-$(VERSION).tar.gz"
325 #############################################################################
326 # looks at the version of Makefile and exports a corresponding source-tree
327 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
328 # privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
329 # Red Hat and one for SuSe (different spec-files)
330 #############################################################################
332 make SNAPVERSION=$(SNAPVERSION) create-snapshot
334 #############################################################################
335 # RPM specifice stuff (SuSE or Redhat, ..)
336 #############################################################################
337 rpm-stuff: dist-check clean clobber
338 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
339 if [ ! -w $(RPM_BASE)/$$dir ]; then \
340 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
341 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
342 $(ECHO) "%_topdir /home/foo/rpm-build"; \
348 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
350 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
351 echo " No value given for RPM_PACKAGEV. Please use:"; \
352 echo " make dist-upload RPM_PACKAGEV=release"; \
353 echo " where \"release\" is the release number you want to and"; \
354 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
356 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
358 echo "ATTENTION: If your distribution use a specific tag on the"; \
359 echo " release field (like \"cl\" for Conectiva, and"; \
360 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
361 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
362 echo " Do it like you would do for a redhat package,"; \
363 echo " (i.e. just the number)."; \
369 #############################################################################
370 # Create Conectiva specfile from RedHat specfile
371 #############################################################################
373 $(RM) privoxy-cl.spec
374 chmod a+x genclspec.sh
377 #############################################################################
378 # Conectiva distribution for x86
379 #############################################################################
380 conectiva-dist: rpm-stuff conectiva-spec
382 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
383 $(RPMBUILD) --clean -ta $(TAR_ARCH)
384 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
386 conectiva-upload: check-release
387 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
389 #############################################################################
390 # redhat distribution alpha and x86
391 #############################################################################
392 redhat-dist: rpm-stuff
394 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
395 $(RPMBUILD) --clean -ta $(TAR_ARCH)
396 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
398 # anonymously ncftps the rpms to sourceforge
399 redhat-upload: check-release
400 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
401 # better should use `arch` here instead of ix86 to support other platforms too
402 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
403 @$(ECHO) -------------------------------------------------------
405 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
406 @$(ECHO) ... and release the files.
407 @$(ECHO) -------------------------------------------------------
408 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
411 #############################################################################
412 # Creates a Red Hat sourcepackage from CVS (not from the current sources
414 #############################################################################
417 $(MV) $(PROGRAM)-rh-$(VERSION).tar.gz $(PROGRAM)-$(VERSION).tar.gz
418 $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
420 #############################################################################
421 # suse distribution. works fine. no need to be root.
422 #############################################################################
424 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
425 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
426 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
427 # privoxy-suse.spec > $$TMPFILE ; then \
428 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
430 # $(ECHO) "Could not set version info in specfile."; \
434 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
435 $(RPMBUILD) --clean -ta $(TAR_ARCH)
436 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
438 # anonymously ncftps the rpms to sourceforge
439 suse-upload: check-release
440 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
441 # better should use `arch` here instead of ix86 to support other platforms too
442 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
443 @$(ECHO) -------------------------------------------------------
445 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
446 @$(ECHO) ... and release the files.
447 @$(ECHO) -------------------------------------------------------
449 # handle with care. use with root.
451 $(RPM) -e junkbuster-suse || true
452 $(RM) -r /etc/junkbuster
453 $(RM) -r /etc/rc.d/junkbuster*
454 $(RM) -r /var/run/junkbuster.pid
455 $(RM) -r /var/log/junkbuster
456 $(RM) /etc/init.d/junkbuster
457 $(RM) /usr/sbin/junkbuster
458 $(RM) /usr/sbin/rcjunkbuster
459 $(RM) /usr/share/man/man1/junkbuster.1.gz
460 $(RPM) -e privoxy-suse || true
461 $(RM) -r /etc/privoxy
462 $(RM) -r /etc/rc.d/privoxy*
463 $(RM) -r /var/run/privoxy.pid
464 $(RM) -r /var/log/privoxy
465 $(RM) /etc/init.d/privoxy
466 $(RM) /usr/sbin/privoxy
467 $(RM) /usr/sbin/rcprivoxy
468 $(RM) /usr/share/man/man1/privoxy.1.gz
470 #############################################################################
471 # generic distribution
472 #############################################################################
475 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
478 $(STRIP_PROG) $(PROGRAM)
479 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
481 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
483 for foo in $(CONFIG_FILES); do \
484 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
487 for foo in $(DOC_FILES); do \
488 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
490 # and zip the archive
491 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
492 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
493 @$(ECHO) Distribution with binary created.
495 # anonymously ncftps the package to sourceforge
497 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
498 @$(ECHO) -------------------------------------------------------
500 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
501 @$(ECHO) ... and release the files.
502 @$(ECHO) -------------------------------------------------------
506 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
508 #############################################################################
509 # solaris distribution. verified on SF machines by swa.
510 #############################################################################
511 solaris-dist: gen-dist
513 # anonymously ncftps the package to sourceforge
514 solaris-upload: gen-upload
517 solaris-clean: gen-clean
520 #############################################################################
522 #############################################################################
524 @$(ECHO) coming soon.
526 @$(ECHO) coming soon.
528 #############################################################################
529 # debian distribution
530 #############################################################################
532 @$(ECHO) coming soon.
534 @$(ECHO) coming soon.
536 #############################################################################
537 # macosx distribution
538 #############################################################################
540 @$(ECHO) coming soon.
542 @$(ECHO) coming soon.
544 #############################################################################
546 #############################################################################
548 @$(ECHO) coming soon.
550 @$(ECHO) coming soon.
552 #############################################################################
553 # freebsd distribution. verified on SF machines by swa.
554 #############################################################################
555 freebsd-dist: gen-dist
557 # anonymously ncftps the package to sourceforge
558 freebsd-upload: gen-upload
561 freebsd-clean: gen-clean
564 #############################################################################
565 # Windows distribution
566 #############################################################################
568 $(ECHO) Not implemented.
571 #############################################################################
572 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
573 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
574 #############################################################################
576 tarball-dist: dist-check clean clobber
577 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
579 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
580 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
581 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
583 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
585 # and zip the archive
586 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
587 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
588 @$(ECHO) Tarball distribution created.
590 # anonymously ncftps the tarball to sourceforge
592 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
593 @$(ECHO) -------------------------------------------------------
595 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
596 @$(ECHO) ... and release the files.
597 @$(ECHO) -------------------------------------------------------
600 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
602 #############################################################################
606 # converts doc/source/*.sgml into html, text and man pages
608 #############################################################################
612 $(RM) doc/webserver/developer-manual/*.html
613 $(RM) -r doc/source/developer-manual
614 mkdir -p doc/text doc/source/developer-manual
615 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
616 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
620 $(RM) doc/webserver/user-manual/*.html
621 $(RM) -r doc/source/user-manual/
622 mkdir -p doc/text doc/source/user-manual
623 cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
624 cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
628 $(RM) doc/webserver/faq/*.html
629 $(RM) -r doc/source/faq
630 mkdir -p doc/text doc/source/faq
631 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
632 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
636 $(RM) doc/man/* doc/webserver/man-page/*.html
637 ifneq ($(MAN2HTML),false)
638 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
639 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
640 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
647 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
648 $(WDUMP) tmp.html > ../../README && $(RM) -r tmp.html
650 # index.sgml is used to create both the Home Page, and a local index
651 # for documentation, etc.
653 # index.html for webserver:
655 cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
656 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
657 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
658 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
660 doc/webserver/index.html && $(RM) doc/webserver/*.bak
662 # privoxy-index.html for local documentation:
664 cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
665 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
666 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
667 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
669 doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
672 # Main documentation target.
673 dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
674 @$(ECHO) Documentation created.
677 # an alternative to the above dok. disabled man page creation for the moment
679 redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
680 @$(ECHO) Documentation created.
682 # For those with man2html ala RH7s.
684 mkdir -p doc/webserver/man-page
685 ifneq ($(MAN2HTML),false)
686 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
687 $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
688 $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
689 # Twice because my version of man2html is pulling in commas and periods in URLs.
690 $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
691 $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
692 # Get rid of spurious
\a from conversion. (How to do this with perl?)
693 $(SED) -e 's/
\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
699 # Otherwise we get plain groff conversion.
701 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
705 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
706 tmp.html > ../../README && $(RM) -r tmp.html
710 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
711 tmp.html > ../../AUTHORS && $(RM) tmp.html
713 # make a man page, and then (lousy) HTML version.
714 # Requires docbook2man (short perl script), see comments
715 # in privoxy-man-page.sgml. This target is not invoked from other dok targets.
716 # It is built separately due to dependencies on perl scripts.
718 mkdir -p doc/source/man
719 cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
720 perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1
721 cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\
722 mv -f index.html privoxy-man-page.html
723 # This html is not used. See make man2html.
724 mv -f doc/source/man/privoxy.1 privoxy.1
727 # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
728 # exceptions accordingly. This needs to go before any doc building (doh).
730 @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
731 @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
732 s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
733 doc/source/*sgml doc/source/*/*sgml
734 $(RM) -r doc/source/*bak doc/source/*/*bak
735 ifeq ($(CODE_STATUS),stable)
736 @$(ECHO) Setting docs to stable $(VERSION)
737 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
738 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
739 doc/source/*sgml doc/source/*/*sgml
740 $(RM) -r doc/source/*bak doc/source/*/*bak
742 @$(ECHO) Setting docs to not stable $(VERSION)
743 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
744 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
745 doc/source/*sgml doc/source/*/*sgml
746 $(RM) -r doc/source/*bak doc/source/*/*bak
751 cp -f doc/source/*.sgml doc/pdf
752 cp -f doc/source/*.dsl doc/pdf
753 cd doc/pdf && db2pdf --pdf -s ldp.dsl user-manual.sgml && mv user-manual.pdf privoxy-user-manual.pdf > /dev/null 2>&1
754 cd doc/pdf && db2pdf --pdf -s ldp.dsl developer-manual.sgml && mv developer-manual.pdf privoxy-developer-manual.pdf > /dev/null 2>&1
755 cd doc/pdf && db2pdf --pdf -s ldp.dsl faq.sgml && mv faq.pdf privoxy-faq.pdf > /dev/null 2>&1
756 $(RM) doc/pdf/*.sgml doc/pdf/*.dsl doc/pdf/*.out doc/pdf/*.tex doc/pdf/*.log doc/pdf/*.aux
758 # the layout and style with db2pdf sucks, here is an alternative
759 dok-pdf2: dok-release
760 mkdir -p doc/source/temp # this directory not in cvs
761 cd doc/source && $(DB) -V nochunks user-manual.sgml > temp/privoxy-user-manual.html
762 cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html
763 cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html
764 # one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output.
766 # Create release announcement in text and html, with short and long versions.
767 # This is a standalone target, and must be invoked directly.
768 announce: dok-release
770 cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
771 mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
772 cd $(DOC_TMP) && $(DB) announce.sgml &&\
773 mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
774 mv -f *html *txt ../../..
777 # The main Privoxy config file, generated from sgml sources.
778 # NOTE: This will require some hand editing. The new file is outputted
779 # as config.new so that problem sections can be compared to previous
780 # version. This is hardcored to w3m for html/text conversion. Also,
781 # requires the shell util 'fmt'.
782 config-file: dok-release
783 cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
784 w3m -dump __tmp.html |fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
785 $(PERL) -pi.bak -e 's/^1\. \@\@TITLE\@\@/ /i;\
786 /^\d\.\d\.\s+/ && tr/[a-z]/[A-Z]/;\
787 $$header_len=0 unless $$hit_header;\
790 for ($$i=1; $$i < $$header_len; $$i++) {print "=";}\
794 $$hit_header=1 if m/^(\d\.)(\d\.)(\d\.)?\s/ && s/^(\d\.)//;\
795 $$header_len = length($$_);\
796 s/^/# /; /^# #{12,}/ && s/^# #/####/;\
797 s/^.*$$// if $$hit_option;\
799 s/^\n//; s/^#\s*-{20,}//;\
800 $$hit_option=1 if s/^#\s+@@//;' config.new
802 @$(ECHO) "****************************************************"
803 @$(ECHO) "The output file is config.new."
804 @$(ECHO) "Now -- you need to hand edit the results!!!"
805 @$(ECHO) "In particular, check the Debug levels, and the"
806 @$(ECHO) "permit-access, forward & socks examples. They"
807 @$(ECHO) "probably got hammered."
808 @$(ECHO) "****************************************************"
810 # config file, alternate verison using lynx (perl stuff unfinished). Lynx
811 # does not do so good a job.
813 cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
814 $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
815 lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
816 $(PERL) -pi -e 's/^( )//;\
817 s/:$\/:\n/' config.new
819 #############################################################################
823 # moves dokumentation to webserver
825 #############################################################################
827 @$(ECHO) -------------------------------------------------------
828 @$(ECHO) You have run make dok/redhat-dok before, right?
829 @$(ECHO) Note that this command scps all stuff to the webserver,
830 @$(ECHO) it will not remove obsolete documents.
831 @$(ECHO) -------------------------------------------------------
835 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
836 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
838 @$(ECHO) Fixing permissions
839 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
840 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
841 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
846 @cd doc/webserver/actions; \
847 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
848 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
850 @$(ECHO) Fixing permissions
851 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
852 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
854 #############################################################################
855 # Source file dependencies
856 #############################################################################
858 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
859 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
860 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
861 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
862 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
863 encode.@OBJEXT@: encode.c encode.h config.h
864 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
865 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
866 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
867 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
868 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
869 killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
870 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
871 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
872 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
873 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
874 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
875 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
876 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
879 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
882 pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
885 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
886 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
887 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
888 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
889 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
891 # An auxiliary program makes the PCRE default character table source
893 pcre/chartables.c: pcre/dftables@EXEEXT@
894 pcre/dftables@EXEEXT@ >pcre/chartables.c
896 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
897 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
900 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
901 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
902 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
904 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
905 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
908 @AMIGAOS_ONLY@OBJS += amiga.o
909 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
910 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
911 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
912 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
915 $(PROGRAM): $(OBJS) $(W32_FILES)
916 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
919 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags`
922 $(RM) `find . -name "*~"`
923 # $(RM) `find . -name "#*#"` # what is this for??
924 $(RM) `find . -name ".\#*"`
927 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
928 privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl
931 # FIXME: What is all this?
933 $(RM) cscope.* *.pdb *.lib *.exp
937 tags: $(SRCS) $(HDRS)
938 etags $(SRCS) $(HDRS)
942 # FIXME: This is a dirty hack to have an install target
943 # that works at least for some setups. This needs
946 $(STRIP_PROG) $(PROGRAM)
947 $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
948 $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
949 $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
950 $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
951 $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
952 if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
953 $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
954 $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
955 # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
956 # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
957 $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
960 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
961 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
962 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
963 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
964 193,51,228,11,1,0,0);'|zcat
966 #############################################################################
972 # $Log: GNUmakefile.in,v $
973 # Revision 1.104.2.7 2002/06/07 00:23:47 hal9
974 # Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
975 # thus breaking them completely.
977 # Revision 1.104.2.6 2002/06/02 03:26:25 hal9
978 # Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
979 # index.html and team/index.html)
981 # Revision 1.104.2.5 2002/05/30 15:35:01 hal9
982 # This is more cleanup on the make config-file target. Most issues for
983 # automatic generation are taken care of. There are still some problems
984 # that require hand editing. Namely, some of the examples that are > 80 chars.
986 # Revision 1.104.2.4 2002/05/29 02:12:17 hal9
987 # Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
988 # new target is 'make config-file', _not_ make config.
990 # Revision 1.104.2.3 2002/05/29 02:05:48 hal9
991 # 'make config' target added (WIP) for future generation of config file from
992 # text in u-m so the two are in sync. New generated config, which requires
993 # some hand editing for the time being.
995 # Revision 1.104.2.2 2002/05/28 02:32:55 hal9
996 # New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
997 # not being cleaned up in doc/webserver.
999 # Revision 1.104.2.1 2002/05/26 17:19:34 hal9
1000 # Remove Table of Contents from readme with oes's dsl trick.
1002 # Revision 1.104 2002/05/24 00:03:49 oes
1003 # Use p_doc.css for the Homepage for consistency
1005 # Revision 1.103 2002/05/23 23:19:00 oes
1006 # Use dsl without TOC for the homepage
1008 # Revision 1.102 2002/05/16 01:20:17 hal9
1009 # make announce target added.
1011 # Revision 1.101 2002/05/15 12:28:46 oes
1012 # Trying to keep Hal happy :)
1014 # Revision 1.100 2002/05/08 13:48:18 hal9
1015 # Ooops, that trashed JB v2.0.2 comment. Fixed.
1017 # Revision 1.99 2002/05/08 13:42:07 hal9
1018 # This fixes the numbering problem on index.html in contact info section (.1.). Using
1019 # perl, since its way too convoluted to try to fix proper with docbook.
1021 # Revision 1.98 2002/05/03 14:33:06 oes
1022 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
1024 # Revision 1.97 2002/04/27 20:27:43 swa
1025 # no longer needed due to new
1026 # PACKAGE_VERSION process
1028 # Revision 1.96 2002/04/27 17:44:32 morcego
1029 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
1030 # - Using the RM macro everywhere rm is called (either we use, or don't)
1033 # Revision 1.95 2002/04/27 15:37:25 swa
1034 # replacing directory in document creation process
1035 # no longer necessary.
1037 # Revision 1.94 2002/04/27 08:23:29 swa
1038 # pdf process reviewed and cleaned up
1040 # Revision 1.93 2002/04/27 04:55:53 morcego
1041 # privoxy-cl.spec now gets removed by clobber target
1043 # Revision 1.92 2002/04/27 04:53:40 morcego
1044 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
1047 # Revision 1.91 2002/04/27 04:44:51 morcego
1048 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
1049 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
1050 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
1052 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
1053 # for Conectiva Linux
1055 # Revision 1.90 2002/04/26 17:46:53 swa
1058 # Revision 1.89 2002/04/26 17:20:54 swa
1059 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1061 # Revision 1.88 2002/04/25 19:13:57 morcego
1062 # Removed RPM release number declaration on configure.in
1063 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1064 # targets (will produce an error, explaining who to do it, if no value
1067 # Revision 1.87 2002/04/23 14:10:59 swa
1068 # now create pdf documents
1070 # Revision 1.86 2002/04/15 04:30:27 hal9
1071 # Missed two -pi.bak's on perl/cygwin problem.
1073 # Revision 1.85 2002/04/14 01:05:34 hal9
1074 # Revert dok-webserver change for SF logo.
1076 # Revision 1.84 2002/04/13 22:43:25 hal9
1077 # -Fix dok-webserver for SF logo (more perl).
1078 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1080 # Revision 1.83 2002/04/12 09:39:25 oes
1081 # Excluding yet more files from tarball; making dist warning yet more scary
1083 # Revision 1.82 2002/04/11 21:07:11 oes
1084 # Excluding more files from tarball build
1086 # Revision 1.81 2002/04/11 14:40:27 oes
1087 # Fixed typo -- Thanks, Moritz!
1089 # Revision 1.80 2002/04/11 12:50:00 oes
1090 # Fixed tarball-dist target
1092 # Revision 1.79 2002/04/11 06:49:28 oes
1093 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1095 # Revision 1.78 2002/04/09 13:37:11 sarantis
1096 # fix tar options typo
1098 # Revision 1.77 2002/04/09 13:28:53 swa
1099 # build suse and gen-dist with html docs
1101 # Revision 1.76 2002/04/08 22:43:41 oes
1102 # Fix: Include dotfiles in fixing webserver permissions
1104 # Revision 1.75 2002/04/08 22:14:59 oes
1105 # Silencing tar warnings in the web* targets
1107 # Revision 1.74 2002/04/08 15:22:44 hal9
1108 # This has finishing touches for dok building. Should be ready to go.
1109 # -The main doc build is now 'make dok', should work on Redhat too.
1110 # -Removed man page from main doc build. It is built separately due to
1111 # perl scripts that most aren't likely to have.
1113 # Revision 1.73 2002/04/08 14:03:24 oes
1114 # oes for al: Fix install target
1116 # Revision 1.72 2002/04/08 13:42:11 oes
1117 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1119 # Revision 1.71 2002/04/07 20:32:03 hal9
1120 # -Add meta data kludge for make dok-webserver via $(PERL).
1121 # -Add subdirs for 'make dok-release'.
1123 # Revision 1.70 2002/04/07 08:59:40 swa
1124 # generated files. do NOT edit.
1125 # fixed directory bug in makefile.
1127 # Revision 1.69 2002/04/07 08:10:47 swa
1128 # create some of the webserver docs
1129 # automatically (in particular if
1130 # those docs recycle other documentation
1131 # fragments). Now committed webserver's
1134 # Revision 1.68 2002/04/07 07:58:11 swa
1135 # create some of the webserver docs
1136 # automatically (in particular if
1137 # those docs recycle other documentation
1140 # Revision 1.67 2002/04/07 05:31:42 hal9
1141 # Add 'dok-release' target:
1142 # -Set doc entities to VERSION and CODE_STATUS during make.
1143 # -Set doc conditional content flags (stable vs non-stable).
1144 # A separate target for the time being but needs to be incorporated into
1145 # dok build at some point.
1146 # -Filter out a spurious ^G from new man page > html converion in man2html.
1148 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1149 # Prettifying groff2html.
1150 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1151 # (The shell "if"s were hiding errors)
1152 # "perl" -> "$(PERL)"
1153 # Spaces->tabs in a couple of places.
1155 # Revision 1.65 2002/04/06 05:16:39 hal9
1156 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1157 # -Both of these will soon be generated files.
1159 # Revision 1.64 2002/04/04 22:14:51 oes
1160 # No longer rely on find honoring -iname
1162 # Revision 1.63 2002/04/04 21:06:22 swa
1165 # Revision 1.62 2002/04/04 20:49:50 swa
1166 # attempt to consolidate the
1167 # different dokbook versions.
1169 # Revision 1.61 2002/04/04 19:18:21 swa
1170 # readme was leftover directory. use w3m instead
1171 # of lynx to be consistent among developers. use
1172 # consistent target naming.
1174 # Revision 1.60 2002/04/04 12:25:41 oes
1175 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1177 # Revision 1.59 2002/04/04 08:32:45 swa
1178 # wrong name for tarball-dist target. further fixed content of tarball dist
1180 # Revision 1.58 2002/04/04 06:32:58 hal9
1181 # New dok targets for make readme.
1183 # Revision 1.57 2002/04/04 00:36:36 gliptak
1184 # always use pcre for matching
1186 # Revision 1.56 2002/04/03 22:28:03 gliptak
1187 # Removed references to gnu_regex
1189 # Revision 1.55 2002/04/03 19:54:29 swa
1190 # freebsd tested to work. attempt to move tarball dist target forward
1192 # Revision 1.54 2002/04/03 14:54:07 oes
1193 # Standard clean and clobber semantics II
1195 # Revision 1.53 2002/04/03 14:19:16 oes
1196 # Standard clean and clobber semantics
1198 # Revision 1.52 2002/04/03 02:56:18 hal9
1199 # Revert previous FAQ numbering kludge.
1201 # Revision 1.51 2002/04/02 13:03:56 oes
1202 # Added fix for webserver permissions
1204 # Revision 1.50 2002/04/02 03:46:24 hal9
1205 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1206 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1208 # Revision 1.49 2002/03/30 22:20:12 swa
1209 # cd didn't work. neither did find.
1211 # Revision 1.48 2002/03/30 19:04:06 swa
1212 # people release differently. no good.
1213 # I want to make parts of the docs only.
1215 # Revision 1.47 2002/03/30 09:05:21 swa
1216 # better packaging. better rpm building.
1217 # tar failed on sun (no exclude there).
1219 # Revision 1.46 2002/03/29 20:09:01 swa
1222 # Revision 1.45 2002/03/29 19:45:45 swa
1225 # Revision 1.44 2002/03/29 17:42:44 gliptak
1226 # Correcting for Solaris tar limitations
1228 # Revision 1.43 2002/03/29 07:40:03 swa
1229 # fixed make webserver. doh
1231 # Revision 1.42 2002/03/29 06:59:04 swa
1232 # other users could not modify files on webserver
1234 # Revision 1.41 2002/03/28 20:43:00 swa
1235 # set make correctly
1237 # Revision 1.40 2002/03/28 04:22:44 hal9
1238 # More on man2html stuff.
1240 # Revision 1.39 2002/03/28 01:04:14 hal9
1241 # More man2html stuff for docs.
1243 # Revision 1.38 2002/03/27 16:02:30 swa
1244 # have a generic target
1246 # Revision 1.37 2002/03/27 15:30:26 swa
1247 # have a consistent appearance
1249 # Revision 1.36 2002/03/27 14:58:08 swa
1250 # can be used by mutilple targets
1252 # Revision 1.35 2002/03/27 14:53:19 swa
1253 # added solaris-dist
1255 # Revision 1.34 2002/03/27 10:30:11 swa
1256 # we want a html man file on the webserver
1258 # Revision 1.33 2002/03/27 03:05:35 hal9
1259 # Added man2html target for docs (redhat-dok only for now)
1261 # Revision 1.32 2002/03/26 22:29:54 swa
1262 # we have a new homepage!
1264 # Revision 1.31 2002/03/26 14:00:18 swa
1265 # fixed make tarball, tarball-dist, tarball-clean
1267 # Revision 1.30 2002/03/25 12:52:25 swa
1270 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1273 # Revision 1.28 2002/03/24 16:19:48 swa
1274 # configure needs to be generated.
1276 # Revision 1.27 2002/03/24 16:13:57 swa
1277 # generated files are a nono in cvs
1279 # Revision 1.26 2002/03/24 15:36:02 swa
1282 # Revision 1.25 2002/03/24 14:31:08 swa
1283 # remove more crappy files. set RPM
1284 # release version correctly.
1286 # Revision 1.24 2002/03/24 14:19:55 swa
1287 # set rpm package release in configure.in. nowhere else.
1289 # Revision 1.23 2002/03/24 13:06:49 swa
1290 # suse-clean now runs fine
1292 # Revision 1.22 2002/03/24 12:56:21 swa
1293 # name change related issues.
1295 # Revision 1.21 2002/03/24 12:43:57 swa
1298 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1299 # Renaming config files
1301 # Revision 1.19 2002/03/22 20:53:03 morcego
1302 # - Ongoing process to change name to JunkbusterNG
1303 # - configure/configure.in: no change needed
1305 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1306 # - PROGRAM = jbng@EXEEXT@
1307 # - rh-spec now references as junkbusterng-rh.spec
1308 # - redhat-upload: references changed to junkbusterng-* (package names)
1309 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1310 # - tarball-src: now JunkbusterNG-*
1311 # - install: initscript now junkbusterng.init and junkbusterng (when
1313 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1314 # - junkbusterng.spec:
1315 # - References to the expression ijb where changed where possible
1316 # - New package name: junkbusterng (all in lower case, acording to
1317 # the LSB recomendation)
1318 # - Version changed to: 2.9.13
1320 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1321 # right. If it obsoletes, why conflict ? Have to check it later)
1322 # - Summary changed: Stefan, please check and aprove it
1323 # - Changes description to use the new name
1324 # - Sed string was NOT changed. Have to wait to the manpage to
1326 # - Keeping the user junkbuster for now. It will require some aditional
1327 # changes on the script (scheduled for the next specfile release)
1328 # - Added post entry to move the old logfile to the new log directory
1329 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1330 # added to the startup list).
1331 # - Added preun section to stop the service with the old name, as well
1332 # as remove it from the startup list
1333 # - Removed the chkconfig --del entry from the conditional block on
1334 # the preun scriptlet (now handled on the %files section)
1335 # - junkbuster.init: renamed to junkbusterng.init
1336 # - junkbusterng.init:
1337 # - Changed JB_BIN to jbng
1338 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1339 # be used where necessary (config dir)
1342 # - The config directory is /etc/junkbuster yet. Have to change it on the
1343 # specfile, after it is changes on the code
1344 # - The only files that got renamed on the cvs tree were the rh specfile and
1345 # the init file. Some file references got changes on the makefile and on the
1346 # rh-spec (as listed above)
1348 # Revision 1.18 2002/03/21 23:00:00 swa
1349 # want to autogenerate stuff.
1351 # Revision 1.17 2002/03/19 19:30:04 morcego
1352 # - Fixing stylesheet checking on configure. If it is found, no further checks
1355 # - configure will now check for db2html or docbook2html (should work now
1356 # on SuSe without the docbktls package)
1358 # Revision 1.16 2002/03/14 22:32:32 hal9
1359 # Bumped the RPM version.
1361 # Revision 1.15 2002/03/08 20:00:28 swa
1364 # Revision 1.14 2002/03/07 18:25:56 swa
1365 # synced redhat and suse build process
1367 # Revision 1.13 2002/03/07 17:17:56 oes
1368 # (Hopefully) fixed for older make versions
1370 # Revision 1.12 2002/03/07 15:28:27 swa
1373 # Revision 1.11 2002/03/06 14:33:18 sarantis
1374 # Use proper temp file, not "abc".
1376 # Revision 1.10 2002/03/06 14:19:35 sarantis
1377 # Cleanup PID_FILE_PATH from redhat-dist target
1379 # Revision 1.9 2002/03/05 17:31:11 morcego
1380 # Search for docbook.dsl. Should solve portability problems for SuSe.
1382 # Revision 1.8 2002/03/05 14:07:42 morcego
1383 # configure now detects rpm topdir, and change GNUmakefile acordingly
1384 # (based on sugestion by Sarantis Paskalis)
1386 # Revision 1.7 2002/03/05 13:43:28 morcego
1387 # Checking for text browser, so redhat-dok can work.
1389 # Revision 1.6 2002/03/05 13:10:51 morcego
1390 # Changes to implement redhat-dok (Hal Burgiss)
1391 # Changes to make it work on other distros and out-of-the-shelf configurations
1393 # Revision 1.5 2002/02/27 15:30:39 hal9
1394 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1396 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1397 # Adding urlmatch.[ch]
1399 # Revision 1.3 2002/01/04 15:26:08 oes
1400 # Added tarball-src target
1402 # Revision 1.2 2001/12/30 14:07:31 steudten
1403 # - Add signal handling (unix)
1404 # - Add SIGHUP handler (unix)
1405 # - Add creation of pidfile (unix)
1406 # - Add action 'top' in rc file (RH)
1407 # - Add entry 'SIGNALS' to manpage
1408 # - Add exit message to logfile (unix)
1410 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1411 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1412 # make break in a more obvious way.
1413 # Adding .PHONY section.
1415 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1416 # Renaming various config files
1417 # Fixing CR->CRLF under Win32 (I hope)
1419 # Revision 1.39 2001/11/06 12:07:30 steudten
1420 # Add --clean for building rpm in target redhat-dist.
1422 # Revision 1.38 2001/11/05 21:35:23 steudten
1423 # Complete rewrite for the 'redhat-dist' target.
1424 # Checks for writeable RPM build directories for calling user.
1425 # So you must not be root, just set the modes to 1777 to
1426 # build a RH package.
1427 # Fix the upload-target to be arch independant.
1428 # Add target for 'solaris-dist' - coming soon.
1430 # Revision 1.37 2001/11/01 00:52:04 hal9
1431 # Redhat-upload stuff per Stefan.
1433 # Revision 1.36 2001/10/31 19:26:13 swa
1434 # automate process of uploading new releases
1437 # Revision 1.35 2001/10/15 22:14:59 joergs
1438 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1439 # the general CFLAGS already.
1441 # Revision 1.34 2001/10/15 18:28:06 steudten
1442 # remove config.cache for target clobber.
1443 # Cleanup make dist for RH and S.u.S.E.
1445 # Revision 1.33 2001/10/10 12:43:33 oes
1446 # Added ugly hack to make install target work at least for some setups.
1448 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1449 # Correcting actionsfile filename for Win32 INI build
1451 # Revision 1.31 2001/09/23 10:13:48 swa
1452 # upload process established. run make webserver and
1453 # the documentation is moved to the webserver. documents
1454 # are now linked correctly.
1456 # Revision 1.30 2001/09/19 17:55:49 oes
1459 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1460 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1461 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1462 # of build problems.
1464 # Revision 1.28 2001/09/13 15:19:08 swa
1465 # we want text files as well.
1467 # Revision 1.27 2001/09/13 13:11:37 steudten
1469 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1471 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1472 # Mac OSX (Darwin) support added.
1474 # Revision 1.25 2001/09/12 22:55:45 joergs
1475 # AmigaOS support added.
1477 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1479 # OS/2 port: update autoconf'd support for the platform.
1481 # Revision 1.23 2001/09/12 16:28:42 swa
1482 # added "make dok" section to generate html pages from
1483 # the sgml source documents. note that the we do not want
1484 # generated stuff in cvs.
1486 # Revision 1.22 2001/09/10 16:31:23 swa
1487 # buildroot definition in the specfile fucks up the build
1488 # process under suse. hence I moved it to the "rpm -ta"
1491 # Revision 1.21 2001/09/10 11:12:49 oes
1494 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1495 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1497 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1498 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1500 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1501 # Major changes to build system in order to fix these bugs:
1502 # - pthreads under Linux was broken - changed -lpthread to -pthread
1503 # - Compiling in MinGW32 mode under CygWin now correctly detects
1504 # which shared libraries are available
1505 # - Solaris support (?) (Not tested under Solaris yet)
1507 # Revision 1.17 2001/07/28 16:44:54 oes
1508 # Fixed sed LF->CRLF conversion and removed deprecated files
1510 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1511 # Added support for linking with POSIX threads library
1513 # Revision 1.15 2001/07/13 13:48:07 oes
1514 # - Moved STATIC #define for pcre to (ac)config.h
1515 # - Made -Ipcre depandant on static pcre compilation to
1516 # avoid version conflicts
1517 # - Included compilation and depandancies for new deanimate.c
1518 # - Made changes to the pcre/pcreposix/pcrs build process
1519 # as required by the new library autodetection in
1522 # Revision 1.14 2001/07/01 16:27:44 oes
1523 # Fixed misplaced dependancy
1525 # Revision 1.13 2001/06/29 13:18:36 oes
1526 # - added depandancy of filters.o on cgi.h
1528 # Revision 1.12 2001/06/12 17:15:56 swa
1529 # fixes, because a clean build on rh6.1 was impossible.
1530 # GZIP confuses make, %configure confuses rpm, etc.
1532 # Revision 1.11 2001/06/11 11:26:35 sarantis
1533 # RPM version should be the same as ijbswa version. The rpm release is
1534 # specified in the specfile.
1536 # Revision 1.10 2001/06/07 17:27:45 swa
1537 # added suse build section
1539 # Revision 1.9 2001/06/04 18:31:58 swa
1540 # files are now prefixed with either `confdir' or `logdir'.
1541 # `make redhat-dist' replaces both entries confdir and logdir
1542 # with redhat values
1544 # Revision 1.8 2001/06/04 10:44:57 swa
1545 # `make redhatr-dist' now works. Except for the paths
1546 # in the config file.
1548 # Revision 1.7 2001/06/03 17:09:09 swa
1549 # swa for oes: reversed my earlier change
1551 # Revision 1.6 2001/06/03 17:07:27 swa
1554 # Revision 1.5 2001/06/03 13:57:26 swa
1555 # compile cgi.c (for andreas' GUI)
1557 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1558 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1560 # Revision 1.3 2001/05/29 20:02:48 joergs
1561 # Changes for AmigaOS added.
1563 # Revision 1.2 2001/05/17 22:23:23 oes
1564 # - Added auto-generation of CRLFs for Win32 config files
1565 # - Added comment-prefix to all Win32-only options in the config file
1566 # and provided auto stripping of this prefix for the Win32 platform by make
1568 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1569 # Initial import of version 2.9.3 source tree