# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.122 2002/10/11 06:03:08 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.123 2002/10/12 06:05:41 hal9 Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
INSTALL_D = -m 0755 -d
# install options for superuser install
#INSTALL_S = -g @GROUP@ -o @USER@
-ID = id -u
+# id -u is not universal. FIXME: need to set from configure. Breaks on
+# Solaris.
+#ID = id -u
LD = @CC@
RM = rm -f
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
GREP = grep
CAT = cat
RPM = rpm
-MV = mv
+MV = mv
TAR = tar
LN = ln
TOUCH = touch
#User Group paras
USER = @USER@
-GROUP = @GROUP@
+GROUP = @GROUP@
# Program to do LF->CRLF
#
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
install conectiva-spec conectiva-dist conectiva-upload debian-dist \
debian-upload ensure-wdump ensure-jadebin ensure-dkprefix CONF_DEST LOG_DEST \
-PID_DEST check_doc install-strip
+PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
$(ECHO) "0";\
fi)
+# If USER is specified but no GROUP, assume there is a GROUP of same name.
+GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
+ $(ECHO) "$(USER)" ;\
+ else\
+ $(ECHO) "$(GROUP)";\
+ fi)
+
install-strip:
$(MAKE) INSTALL_P='$(INSTALL_P) -s' install
-install: CONF_DEST LOG_DEST PID_DEST check_doc all
- @$(ECHO) -e "\nCreating directories, and preparing Privoxy installation"
- @$(CHMOD) 0755 $(MKDIR)
- @$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(SHARE_DEST) $(MAN_DEST) $(LOG_DEST) $(PID_DEST)
- @$(INSTALL) $(INSTALL_D) $(CONF_DEST)
- @$(INSTALL) $(INSTALL_D) $(CONF_DEST)/templates
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling is weak. If group is null,
+# we blindly assume there is a group that matches $(USER). configure only
+# tests for the first group outputted from groups command. Perhaps the whole
+# user/group validation should be done here. hal.
+install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ $(ECHO) "Creating directories, and preparing Privoxy installation"
+ $(CHMOD) 0755 $(MKDIR)
+ $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(SHARE_DEST) $(MAN_DEST) $(LOG_DEST) $(PID_DEST)
+ $(INSTALL) $(INSTALL_D) $(CONF_DEST)
+ $(INSTALL) $(INSTALL_D) $(CONF_DEST)/templates
- @# Install the executable binary
- @$(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
- @$(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
+ # Install the executable binary
+ $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
- @# Install the DOCS and man page
- @if [ $(check_doc) = 0 ]; then \
+ # Install the DOCS and man page
+ -if [ $(check_doc) = 0 ]; then \
DOC=$(DOC_DEST) ;\
else \
DOC=$(prefix)/doc/privoxy ;\
$(INSTALL) $(INSTALL_D) $$DOC ;\
$(INSTALL) $(INSTALL_D) $$DOC/user-manual ;\
$(INSTALL) $(INSTALL_D) $$DOC/faq ;\
+ $(INSTALL) $(INSTALL_D) $$DOC/developer-manual ;\
+ $(INSTALL) $(INSTALL_D) $$DOC/man-page ;\
$(INSTALL) $(INSTALL_D) $$DOC/images ;\
if [ -d "$(DOK_WEB)" ]; then \
- $(ECHO) Installing FAQ, Manual, and other docs to $$DOC.;\
+ $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/user-manual/*html $$DOC/user-manual;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/faq/*html $$DOC/faq;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/developer-manual/*html $$DOC/developer-manual;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/images/*jpg $$DOC/images;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
$(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
$(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
$(INSTALL) $(INSTALL_T) README $$DOC;\
$(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
fi
- @$(ECHO) Installing man page to $(MAN_DEST)/privoxy.1.gz
- @-$(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
+ $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1.gz
+ -$(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
- @# Change the Config file default directories acording to the configured ones
- @$(ECHO) Rewriting config.
- @if [ -f config.base ] ; then \
+ # Change the config file default directories according to the configured ones
+ $(ECHO) Rewriting config
+ if [ -f config.base ] ; then \
$(CAT) config >config~ ;\
$(MV) config.base config ;\
fi
- @$(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
$(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.updated
- @$(MV) config config.base
- @$(MV) config.updated config
-
- @# Install the config support files. Test for root install, and abort
- @# if there is no privoxy user, and no other user was enabled during
- @# configure.
- @$(ECHO) Installing templates to $(CONF_DEST)/templates
- @$(INSTALL) $(INSTALL_T) `find templates -type f` $(CONF_DEST)/templates
- @if [ "`id |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ $(MV) config config.base
+ $(MV) config.updated config
+
+ # Install the config support files. Test for root install, and abort
+ # if there is no privoxy user, and no other user was enabled during
+ # configure.
+ $(ECHO) Installing templates to $(CONF_DEST)/templates
+ $(INSTALL) $(INSTALL_T) `find templates -type f` $(CONF_DEST)/templates
+ if [ "`id |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
if [ x$(USER) = x ]; then \
if [ "`id privoxy`" ]; then \
- $(ECHO) -e "\n Setting user and group to privoxy";\
+ $(ECHO) "Setting user and group to privoxy";\
INSTALL_CONF="$(INSTALL_T) -b -g privoxy -o privoxy" ;\
else \
- $(ECHO) -e "******************************************************************" ;\
- $(ECHO) -e " WARNING! WARNING! installing config files as root!" ;\
- $(ECHO) -e " It is strongly recommended to run $(PROGRAM) as non-root user," ;\
- $(ECHO) -e " and to install the config files as that user!" ;\
- $(ECHO) -e " Please read INSTALL, and create a privoxy user!" ;\
- $(ECHO) -e "*******************************************************************" ;\
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as non-root user," ;\
+ $(ECHO) " and to install the config files as that user!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user!" ;\
+ $(ECHO) "*******************************************************************" ;\
exit 1 ;\
fi ;\
else \
- if [ x$(GROUP) = x ]; then \
- $(ECHO) -e "\n Superuser install, installing config files as $(USER),$(USER)" ;\
- INSTALL_CONF="$(INSTALL_T) -b -o $(USER) -g $(USER)" ;\
- else \
- $(ECHO) -e "\n Superuser install, installing config files as $(USER),$(GROUP)" ;\
- INSTALL_CONF="$(INSTALL_T) -b -o $(USER) -g $(GROUP)" ;\
- fi ;\
+ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_T) -b -o $(USER) -g $(GROUP_T)" ;\
fi ;\
else \
if [ ! "`id $(USER)`" = "`id`" ] ;then \
- $(ECHO) -e "\n ** WARNING ** current install user different from configured user!! edit may fail.\n" ;\
+ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
+ $(ECHO) "Edit may fail." ;\
fi ;\
INSTALL_CONF="$(INSTALL_T) -b " ;\
fi ;\
$(INSTALL) $$INSTALL_CONF trust $(CONF_DEST) ;\
fi ;\
- @# setup the logfiles
- @# mode 0640 in the logs for privacy reasons
- @$(ECHO) Creating logfiles in $(LOG_DEST)
- @$(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
- @if [ x$(USER) != x ]; then \
- $(CHOWN) $(USER),$(GROUP) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
- $(ECHO) -e "\n** WARNING ** current install user different from configured user." ;\
- $(ECHO) -e " Logging may fail!!" ;\
+ # Set up the logfiles, mode 0640 for privacy reasons
+ $(ECHO) Creating logfiles in $(LOG_DEST)
+ $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
+ if [ x$(USER) != x ]; then \
+ $(CHOWN) $(USER):$(GROUP_T) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
$(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
- @# Install the init and logrotate scripts. Test for Slackware and Red Hat only.
- @# Install if dest is writable.
- @if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ # Install the init and logrotate scripts. Test for Slackware and Red Hat only.
+ # Install if dest is writable.
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
$(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
$(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
$(SED) 's+%USER%+$(USER)+' | \
- $(SED) 's+%GROUP%+$(GROUP)+' >slackware/rc.privoxy ;\
+ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
$(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
- $(ECHO) -e "\nInstalling for Slackware." ;\
- $(ECHO) -e "\n Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
+ $(ECHO) "Installing for Slackware." ;\
+ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy." ;\
- $(INSTALL) $(INSTALL_P) privoxy.init /etc/rc./init.d/privoxy ;\
+ $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
+ $(INSTALL) $(INSTALL_P) privoxy.init /etc/rc.d/init.d/privoxy ;\
$(MKDIR) /etc/logrotate.d/ ;\
$(INSTALL) $(INSTALL_P) privoxy.logrotate /etc/logrotate.d/privoxy ;\
elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(ECHO) "Installing generic init script to /etc/init.d/privoxy." ;\
+ $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
$(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
else \
- $(ECHO) "No init script installed, install it manually if needed." ;\
+ $(ECHO) "No init script installed, install it manually if needed" ;\
fi
+ # mmmmm, good.
@$(ECHO) "Privoxy installation succeeded!"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
- #
- # FIXME: test this in all systems and with several options and report any bugs
- #
-
+ $(ECHO) Starting Privoxy uninstallation
# KILL privoxy if running
- -@ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid ` >/dev/nul 2>/dev/null
- -@ $(KILL) `$(CAT) /var/run/privoxy.pid ` >/dev/nul 2>/dev/null
+ -@ test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid`
+ -@ test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) /var/run/privoxy.pid `
# Program binary
+ $(ECHO) Removing $(PROGRAM) binary
$(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
# config files and dir and maybe old install backups
+ $(ECHO) Removing $(PROGRAM) config files
$(RM) $(CONF_DEST)/config $(CONF_DEST)/default.action $(CONF_DEST)/default.filter \
$(CONF_DEST)/trust $(CONF_DEST)/standard.action $(CONF_DEST)/user.action \
$(CONF_DEST)/config~ $(CONF_DEST)/default.action~ $(CONF_DEST)/default.filter~ \
$(CONF_DEST)/trust~ $(CONF_DEST)/standard.action~ $(CONF_DEST)/user.action~
$(RM) -r $(CONF_DEST)/templates
- -$(RMDIR) $(CONF_DEST) || $(ECHO) -e " $(CONF_DEST) is not empty, couldnt remove it\n" ;\
# man page and docs
+ $(ECHO) Removing $(PROGRAM) docs
-$(RM) $(MAN_DEST)/privoxy.1.gz
-$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
# Log and jarfile and pidfile
- -$(RM) $(LOG_DEST)/logfile || $(RM) /var/log/privoxy/logfile
- -$(RM) $(LOG_DEST)/jarfile || $(RM) /var/log/privoxy/jarfile
- -$(RM) $(PID_DEST)/privoxy.pid || $(RM) /var/run/privoxy.pid
-
- # final clean up of unused directories
+ $(ECHO) Removing $(PROGRAM) logs
+ -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
+
+ # Final clean up of unused directories. Special handling of CONF and LOG
+ # destinations.
+ $(ECHO) Removing $(PROGRAM) directories
+ $(RMDIR) $(LOG_DEST) || $(ECHO) "$(LOG_DEST) is not empty, not removed" ;\
+ $(RMDIR) $(CONF_DEST) || $(ECHO) "$(CONF_DEST) is not empty, not removed" ;\
if [ ! "$(prefix)" = "/usr/local" ] ;then \
- $(RMDIR) $(MAN_DEST) || $(ECHO) -e " $(MAN_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(MAN_DIR) || $(ECHO) -e " $(MAN_DIR) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(SHARE_DEST)/doc || $(ECHO) -e " $(SHARE_DEST)/doc is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(SHARE_DEST) || $(ECHO) -e " $(SHARE_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(CONF_BASE) || $(ECHO) -e " $(CONF_BASE) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(SBIN_DEST) || $(ECHO) -e " $(SBIN_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(LOG_DEST) || $(ECHO) -e " $(LOG_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(prefix) || $(ECHO) -e " $(prefix) is not empty, couldnt remove it\n" ;\
+ $(RMDIR) $(MAN_DEST) || $(ECHO) "$(MAN_DEST) is not empty, not removed" ;\
+ $(RMDIR) $(MAN_DIR) || $(ECHO) "$(MAN_DIR) is not empty, not removed" ;\
+ $(RMDIR) $(SHARE_DEST)/doc || $(ECHO) "$(SHARE_DEST)/doc is not empty, not removed" ;\
+ $(RMDIR) $(SHARE_DEST) || $(ECHO) "$(SHARE_DEST) is not empty, not removed" ;\
+ $(RMDIR) $(SBIN_DEST) || $(ECHO) "$(SBIN_DEST) is not empty, not removed" ;\
+ if test $(LOG_DEST) != /var/log/privoxy ; then \
+ $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run ;then \
+ $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test -d $(prefix)/var ; then \
+ $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
fi
+
# init scripts and logrotate
+ $(ECHO) Removing $(PROGRAM) init script
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(RM) /etc/rc.d/rc.privoxy ;\
elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
$(RM) /etc/init.d/privoxy ;\
else \
- $(ECHO) -e "\n Unable to remove privoxy init script... not installed or permition denied" ;\
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
fi
+ $(ECHO) Privoxy uninstalled, bye
coffee:
@perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.123 2002/10/12 06:05:41 hal9
+# WIP: This is mostly to fix various problems encountered on SF CF Solaris
+# servers for the install target only. This did not handle /[^C]*, test -e, not
+# quoting within tests (ie [ `id $(USER)` = `id` ] needs quoting) in some
+# situations, and does not support id -u (with the id in $PATH, but there is
+# another...). Also, cleaned up output. Needs testing. I am unable to test the
+# root install stuff either. It installs now at least (not tested further).
+# A few other nits.
+#
# Revision 1.122 2002/10/11 06:03:08 hal9
# Really install FAQ this time, and not u-m in two locations. Include images
# for u-m.