-->
<para>
- <application>Privoxy 3.0.26</application> stable is a bug-fix release
- for the previously released 3.0.25 beta which introduced client-specific
- tags and included a couple of minor improvements.
+ <application>Privoxy 3.0.27</application> stable scales better
+ in multi-user environments and brings a couple of tuning directives.
</para>
<itemizedlist>
<listitem>
<para>
- Bug fixes:
- </para>
+ General improvements:
<itemizedlist>
<listitem>
<para>
- Fixed crashes with "listen-addr :8118" (SF Bug #902).
- The regression was introduced in 3.0.25 beta and reported
- by Marvin Renich in Debian bug #834941.
- </para>
+ Add a receive-buffer-size directive which can be used to
+ set the size of the previously statically allocated buffer
+ in handle_established_connection().
+ Increasing the buffer size increases Privoxy's memory usage but
+ can lower the number of context switches and thereby reduce the
+ CPU usage and potentially increase the throughput.
+ This is mostly relevant for fast network connections and
+ large downloads that don't require filtering.
+ Sponsored by: Robert Klemme
+ </para>
</listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- General improvements:
- </para>
- <itemizedlist>
<listitem>
<para>
- Log when privoxy is toggled on or off via cgi interface.
+ Add a listen-backlog directive which specifies the backlog
+ value passed to listen().
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Highlight the "Info: Now toggled " on/off log message
- in the Windows log viewer.
+ Add an enable-accept-filter directive which allows to
+ toggle accept filter support at run time when compiled
+ with FEATURE_ACCEPT_FILTER support.
+ It makes testing more convenient and now that it's
+ optional we can emit an error message if enabling
+ the accept filter fails.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Highlight the loading actions/filter file log message
- in the Windows log viewer.
+ Add a delay-response{} action.
+ This is useful to tar pit JavaScript requests that
+ are endlessly retried in case of blocks. It can also
+ be used to simulate a slow Internet connection.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Mention client-specific tags on the toggle page as a
- potentionally more appropriate alternative.
+ Add a 'trusted-cgi-referrer' directive.
+ It allows to configure another page or site that can be used
+ to reach sensitive CGI resources.
+ Sponsored by: Robert Klemme
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Documentation improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Update download section on the homepage.
- The downloads are available from the website now.
+ Add a --fuzz mode which exposes Privoxy internals to input
+ from files or stdout.
+ Mainly tested with American Fuzzy Lop. For details see:
+ https://www.fabiankeil.de/talks/fuzzing-on-freebsd/
+ This work was partially funded with donations and done
+ as part of the Privoxy month in 2015.
</para>
</listitem>
<listitem>
<para>
- Add sponsor FAQ.
+ Consistently use the U(ngreedy) flag in the 'img-reorder' filter.
</para>
</listitem>
<listitem>
<para>
- Remove obsolete reference to mailing lists hosted at SourceForge.
+ listen_loop(): Reuse a single thread attribute object
+ The object doesn't change and creating a new one for
+ every thread is a waste of (CPU) time.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Update the "Before the Release" section of the developer manual.
+ Free csp resources in the thread that belongs to the csp instead
+ of the main thread which has enough on its plate already.
+ Sponsored by: Robert Klemme
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Infrastructure improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Add perl script to generate an RSS feed for the packages
- Submitted by "Unknown".
+ Improve 'socket timeout reached' message.
+ Log the timeout that was triggered and downgrade the
+ log level to LOG_LEVEL_CONNECT to reduce the log noise
+ with common debug settings.
+ The timeout isn't necessary the result of an error and
+ usually merely indicates that Privoxy's socket timeout
+ is lower than the relevant timeouts used by client and
+ server.
+ Sponsored by: Robert Klemme
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Build system improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- strptime.h: fix a compiler warning about ambiguous else.
+ Explicitly taint the server socket in case of CONNECT requests.
+ This doesn't fix any known problems, but makes
+ some log messages less confusing.
</para>
</listitem>
<listitem>
<para>
- configure.in: Check for Docbook goo on the BSDs as well.
+ Let write_pid_file() terminate if the pid file can't be opened.
+ Logging the issue at info level is unlikely to help.
</para>
</listitem>
<listitem>
<para>
- GNUMakefile.in: Let the dok-user target remove temporary files.
+ log_error(): Reduce the mutex-protected area by not using a
+ heap-allocated buffer that is shared between all threads.
+ This increases performance and reduces the latency with
+ verbose debug settings and multiple concurrent connections.
+ Sponsored by: Robert Klemme
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- </itemizedlist>
-
-<para>
- Changes between <application>Privoxy 3.0.25 beta</application>
- and the previous release:
-</para>
-
- <itemizedlist>
- <listitem>
- <para>
- Bug fixes:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Always use the current toggle state for new requests.
- Previously new requests on reused connections inherited
- the toggle state from the previous request even though
- the toggle state could have changed.
- Reported by Robert Klemme.
+ Let zalloc() use calloc() if it's available.
+ In some situations using calloc() can be faster than
+ malloc() + memset() and it should never be slower.
+ In the real world the impact of this change is not
+ expected to be noticeable.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Fixed two buffer-overflows in the (deprecated) static
- pcre code. These bugs are not considered security issues
- as the input is trusted.
- Found with afl-fuzz and ASAN.
+ Never use select() when poll() is available.
+ On most platforms select() is limited by FD_SETSIZE while
+ poll() is not. This was a scaling issue for multi-user setups.
+ Using poll() has no downside other than the usual risk
+ that code modifications may introduce new bugs that have
+ yet to be found and fixed.
+ At least in theory this commit could also reduce the latency
+ when there are lots of connections and select() would use
+ "bit fields in arrays of integers" to store file descriptors.
+ Another side effect is that Privoxy no longer has to stop
+ monitoring the client sockets when pipelined requests are
+ waiting but can't be read yet.
+ This code keeps the select()-based code behind ifdefs for
+ now but hopefully it can be removed soonish to make the
+ code more readable.
+ Sponsored by: Robert Klemme
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- General improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Added support for client-specific tags which allow Privoxy
- admins to pre-define tags that are set for all requests from
- clients that previously opted in through the CGI interface.
- They are useful in multi-user setups where admins may
- want to allow users to disable certain actions and filters
- for themselves without affecting others.
- In single-user setups they are useful to allow more fine-grained
- toggling. For example to disable request blocking while still
- crunching cookies, or to disable experimental filters only.
- This is an experimental feature, the syntax and behaviour may
- change in future versions.
- Sponsored by Robert Klemme.
+ Add a 'reproducible-tarball-dist' target.
+ It's currently separate from the "tarball-dist" target
+ because it requires a tar implementation with mtree spec
+ support.
+ It's far from being perfect and does not enforce a
+ reproducible mode, but it's better than nothing.
</para>
</listitem>
<listitem>
<para>
- Dynamic filters and taggers now support a $listen-address variable
- which contains the address the request came in on.
- For external filters the variable is called $PRIVOXY_LISTEN_ADDRESS.
- Original patch contributed by pursievro.
+ Use arc4random() if it's available.
+ While Privoxy doesn't need high quality pseudo-random numbers
+ there's no reason not to use them when we can and this silences
+ a warning emitted by code checkers that can't tell whether or not
+ the quality matters.
</para>
</listitem>
<listitem>
<para>
- Add client-header-tagger 'listen-address'.
+ Show the FEATURE_EXTERNAL_FILTERS status on the status page.
+ Better late than never. Previously a couple of tests weren't
+ executed as Privoxy-Regression-Test couldn't detect that the
+ FEATURE_EXTERNAL_FILTERS dependency was satisfied.
</para>
</listitem>
<listitem>
<para>
- Include the listen-address in the log message when logging new requests.
- Patch contributed by pursievro.
+ Ditch FEATURE_IMAGE_DETECT_MSIE.
+ It's an obsolete workaround we inherited from Junkbuster
+ and was already disabled by default.
+ Users that feel the urge to work around issues with
+ image requests coming from an Internet Explorer version
+ from more than 15 years ago can still do this using tags.
</para>
</listitem>
<listitem>
<para>
- Turn invalid max-client-connections values into fatal errors.
+ Consistently use strdup_or_die() instead of strdup() in
+ cases where allocation failures aren't expected.
+ Using strdup_or_die() allows to remove a couple of explicit
+ error checks which slightly reduces the size of the binary.
</para>
</listitem>
<listitem>
<para>
- The show-status page now shows whether or not dates before 1970
- and after 2038 are expected to be handled properly.
- This is mainly useful for Privoxy-Regression-Test but could
- also come handy when dealing with time-related support requests.
+ Insert a refresh tag into the /client-tags CGI page when
+ serving it while a client-specific tag is temporarily enabled.
+ This makes it less likely that the user ends up
+ looking at tag state that is out of date.
</para>
</listitem>
<listitem>
<para>
- On Mac OS X the thread id in log messages are more likely to
- be unique now.
+ Use absolute URLs in the client-tag forms.
+ It's more consistent with the rest of the CGI page
+ URLs and makes it more convenient to copy the forms
+ to external pages.
</para>
</listitem>
<listitem>
<para>
- When complaining about missing filters, the filter type is logged
- as well.
+ cgi_error_disabled(): Use status code 403 and an appropriate response line
</para>
</listitem>
<listitem>
<para>
- A couple of harmless coverity warnings were silenced
- (CID #161202, CID #161203, CID #161211).
+ Use a dedicated CGI handler to deal with tag-toggle requests
+ As a result the /client-tags page is now safe to reach without
+ trusted Referer header which makes bookmarking or linking to
+ it more convenient.
+ Finally, refreshing the /client-tags page to show the
+ current state can no longer unintentionally repeat the
+ previous toggle request.
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Action file improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Filtering is disabled for Range requests to let download resumption
- and Windows updates work with the default configuration.
+ Don't add a "Connection" header for CONNECT requests.
+ Explicitly sending "Connection: close" is not necessary and
+ apparently it causes problems with some forwarding proxies
+ that will close the connection prematurely.
+ Reported by Marc Thomas.
</para>
</listitem>
<listitem>
<para>
- Unblock ".ardmediathek.de/".
- Reported by ThTomate in #932.
+ Fix compiler warnings.
</para>
- </listitem>
+ </listitem>
</itemizedlist>
+ </para>
</listitem>
<listitem>
<para>
- Documentation improvements:
- </para>
+ Bug fixes:
<itemizedlist>
<listitem>
<para>
- Add FAQ entry for crashes caused by memory limits.
+ rfc2553_connect_to(): Properly detect and log when poll()
+ reached the time out. Previously this was logged as:
+ Could not connect to [...]: No error: 0.
+ which isn't very helpful.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Remove obsolete FAQ entry about a bug in PHP 4.2.3.
+ add_tag_for_client(): Set time_to_live properly.
+ Previously the time_to_live was always set for the first tag.
+ Attempts to temporarily enable a tag would result in enabling
+ it permanently unless no tag was enabled already.
</para>
</listitem>
<listitem>
<para>
- Mention the new mailing lists were appropriate.
- As the archives have not been migrated, continue to
- mention the archives at SF in the contacting section
- for now.
+ Revert r1.165 which didn't perform as advertised.
+ While the idea was to use "https:// when creating links
+ for the user manual on the website", the actual effect
+ was to use "https://" when Privoxy was supposed to serve
+ the user manual itself.
+ Reported by Yossi Zahn on Privoxy-devel@.
</para>
</listitem>
<listitem>
<para>
- Note that the templates should be adjusted if Privoxy is
- running as intercepting proxy without getting all requests.
+ socks5_connect(): Fail in case of unsupported address types.
+ Previously they would not be detected right away and
+ Privoxy would fail later on with an error message that
+ didn't make it obvious that the problem was socks-related.
+ So far, no such problems have actually been reported.
</para>
</listitem>
<listitem>
<para>
- A bunch of links were converted to https://.
+ socks5_connect(): Properly deal with socks replies that
+ contain IPv6 addresses.
+ Previously parts of the reply were left unread and
+ later on treated as invalid HTTP response data.
+ Fixes #904 reported by Danny Goossen who also provided
+ the initial version of this patch.
</para>
- </listitem>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Action file improvements:
+ <itemizedlist>
<listitem>
<para>
- Rephrase onion service paragraph to make it more obvious
- that Tor is involved and that the whole website (and not
- just the homepage) is available as onion service.
+ Unblock 'msdn.microsoft.com/'.
+ It (presumably) isn't used to serve the kind of ads Privoxy should
+ block by default but happens to serve lots of pages with URLs that
+ are likely to result in false positives.
+ Reported by bugreporter1694 in AF#939.
</para>
</listitem>
<listitem>
<para>
- Streamline the "More information" section on the homepage further
- by additionally ditching the link to the 'See also' section
- of the user manual. The section contains mostly links that are
- directly reachable from the homepage already and the rest is
- not significant enough to get a link from the homepage.
+ Disable gif deanimation for requests tagged with CSS-REQUEST.
+ The action will ignore content that isn't considered text
+ anyway and explicitly disabling it makes this more obvious
+ if "action" debugging (debug 65536) is enabled while
+ "gif deanimation" debugging (debug 256) isn't.
</para>
</listitem>
<listitem>
<para>
- Change the add-header{} example to set the DNT header
- and use a complete section to make copy and pasting
- more convenient.
- Add a comment to make it obvious that adding the
- header is not recommended for obvious reasons.
- Using the DNT header as example was suggested by
- Leo Wzukw.
+ Explicitly disable HTML filters for requests with CSS-REQUEST tag.
+ The filters are unlikely to break CSS files but executing
+ them without (intentionally) getting any hits is a waste of
+ cpu time and makes the log more noisy when running with
+ "debug 64".
</para>
</listitem>
<listitem>
<para>
- Streamline the support-and-service template
- Instead of linking to the various support trackers
- (whose URLs hopefully change soon), link to the
- contact section of the user manual to increase the
- chances that users actually read it.
+ Unblock 'adventofcode.com/'.
+ Reported by Clint Adams in Debian bug #848211.
+ Fixes Roland's AF#937.
</para>
</listitem>
<listitem>
<para>
- Add a FAQ entry for tainted sockets.
+ Unblock 'adlibris.com'.
+ Reported by Wyrex in #935
</para>
</listitem>
<listitem>
<para>
- More sections in the documentation have stable URLs now.
+ Unblock .golang.org/
</para>
</listitem>
<listitem>
<para>
- FAQ: Explain why 'ping config.privoxy.org' is not expected
- to reach a local Privoxy installation.
+ Add fast-redirects exception for '.youtube.com/.*origin=http'
</para>
- </listitem>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Privoxy-Log-Parser:
+ <itemizedlist>
<listitem>
<para>
- Note that donations done through Zwiebelfreunde e.V. currently
- can't be checked automatically.
+ Don't gather host and resource statistics if they aren't requested.
+ While the performance impact seems negligible this significantly
+ reduces the memory usage if there are lots of requests.
</para>
</listitem>
<listitem>
<para>
- Updated section regarding starting Privoxy under OS X.
+ Bump version as the behaviour (slightly) changed.
</para>
</listitem>
<listitem>
<para>
- Use dedicated start instructions for FreeBSD and ElectroBSD.
+ Count connection failures as well in statistics mode.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Removed release instructions for AIX. They haven't been working
- for years and unsurprisingly nobody seems to care.
+ Count connection timeouts as well in statistics mode.
+ Sponsored by: Robert Klemme
</para>
</listitem>
<listitem>
<para>
- Removed obsolete reference to the solaris-dist target.
+ Fix an 'uninitialized value' warning when generating
+ statistics for a log file without response headers.
+ While privoxy-log-parser was supposed to detect this already,
+ the check was flawed and the message the user didn't see was
+ somewhat confusing anyway.
+ Now the message is less confusing, more helpful and actually printed.
+ Reported by: Robert Klemme
</para>
- </listitem>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Documentation improvements:
+ <itemizedlist>
<listitem>
<para>
- Updated the release instructions for FreeBSD.
+ Refer to the git sources instead of CVS.
</para>
</listitem>
<listitem>
<para>
- Removed unfinished release instructions for Amiga OS and HP-UX 11.
+ Use GNU/Linux when referring to the OS instead of the kernel.
</para>
</listitem>
<listitem>
<para>
- Added a pointer to the Cygwin Time Machine for getting the last release of
- Cygwin version 1.5 to use for building Privoxy on Windows.
+ Add FAQ entry for what to do if editing the config file is access denied.
</para>
</listitem>
<listitem>
<para>
- Various typos have been fixed.
+ Add brief HTTP/2 FAQ.
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Infrastructure improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- The website is no longer hosted at SourceForge and
- can be reached through https now.
+ Add a small fuzzing section to the developer documentation.
</para>
</listitem>
<listitem>
<para>
- The mailing lists at SourceForge have been deprecated,
- you can subscribe to the new ones at: https://lists.privoxy.org/
+ Add a client-header-tagger{client-ip-address} example.
</para>
</listitem>
<listitem>
<para>
- Migrating the remaining services from SourceForge is
- work in progress (TODO list item #53).
+ Stop suggesting that Privoxy is an anonymizing proxy.
+ The term could lead to Privoxy users overestimating
+ what it can do on its own (without Tor).
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Build system improvements:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Add configure argument to optimistically redefine FD_SETSIZE
- with the intent to change the maximum number of client
- connections Privoxy can handle. Only works with some libcs.
- Sponsored by Robert Klemme.
+ Make it more obvious that SPI accepts Paypal, too.
+ Currently most donations are made through the Paypal account
+ managed by Zwiebelfreunde e.V. and a more even distribution
+ would be useful.
</para>
</listitem>
<listitem>
<para>
- Let the tarball-dist target skip files in ".git".
+ Suggest to log applying actions as well when reproducing problems.
</para>
</listitem>
<listitem>
<para>
- Let the tarball-dist target work in cwds other than current.
+ Explicitly mention that Privoxy binaries are built by individuals
+ on their own systems. Buyer beware!
</para>
</listitem>
<listitem>
<para>
- Make the 'clean' target faster when run from a git repository.
+ Mention the release feed on the homepage.
</para>
</listitem>
<listitem>
<para>
- Include tools in the generic distribution.
+ Remove a mysterious comment with a GNU FDL link as it isn't
+ useful and could confuse license scanners.
+ In May 2002 it was briefly claimed that "this document" was covered
+ by the GNU FDL. The commit message (r1.5) doesn't explain the motivation
+ or whether all copyright holders were actually asked and agreed to the
+ declared license change.
+ It's thus hard to tell whether or not the license change was legit,
+ but luckily two days later the "doc license" was "put" "back to GPL"
+ anyway (r1.6).
+ At the same time the offending comment with a link to the FDL
+ (not the GPL) was added for no obvious reason.
+ Now it's gone again.
</para>
</listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Regression tests:
+ <itemizedlist>
<listitem>
<para>
- Let the gen-dist target work in cwds other than current.
+ Bump for-privoxy-version to 3.0.27 as we now rely on untrusted
+ CGI request being rejected with status code 403 (instead of 200).
</para>
</listitem>
<listitem>
<para>
- Sort find output that is used for distribution tarballs
- to get reproducible results.
+ Update test for /send-stylesheet and add another one
</para>
- </listitem>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Templates:
+ <itemizedlist>
<listitem>
<para>
- Don't add '-src' to the name of the tar ball generated by the
- gen-dist target. The package isn't a source distribution but a
- binary package.
- While at it, use a variable for the name to reduce the chances
- that the various references get out of sync and fix the gen-upload
- target which was looking in the wrong directory.
+ Consistently use https:// when linking to the Privoxy website.
</para>
</listitem>
<listitem>
<para>
- Add regression-tests.action to the files that are distributed.
+ Remove SourceForge references in Copyright header.
</para>
</listitem>
<listitem>
<para>
- The gen-dist target which was broken since 2002 (r1.92) has been fixed.
+ Remove a couple of SourceForge references in a comment.
+ While at it, fix the grammar.
</para>
</listitem>
<listitem>
<para>
- Remove genclspec.sh which has been obsolete since 2009.
+ Move the site-specific documentation block before the generic one.
+ While most Privoxy installations don't have a site-specific
+ documentation block, in cases were it exists it's likely to
+ be more relevant than the generic one.
+ Showing it first makes it less likely that users stop reading
+ before they reach it, especially on pages that don't fit on
+ the screen.
+ </para>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Build system improvements:
+ <itemizedlist>
+ <listitem>
+ <para>
+ Prefer openjade to jade. On some systems Jade produces
+ HTML with unescaped ampersands in URLs.
</para>
</listitem>
<listitem>
<para>
- Remove obsolete reference to Redhat spec file.
+ Prefer OpenSP to SP to be consistent.
</para>
</listitem>
<listitem>
<para>
- Remove the obsolete announce target which has been commented out years ago.
+ Have Docbook generated HTML files be straight ASCII.
+ Dealing with a mixture of ISO-8859 and UTF-8 files is problematic.
</para>
</listitem>
<listitem>
<para>
- Let rsync skip files if the checksums match.
+ Echo the filename to stderr for 'make dok-tidy'.
+ Make it a bit easier to find errors in docbook generated HTML.
</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>
- Privoxy-Regression-Test:
- </para>
- <itemizedlist>
+ </listitem>
<listitem>
<para>
- Add a "Default level offset" directive which can be used to
- change the default level by a given value.
- This directive affects all tests located after it until the end
- of the file or a another "Default level offset" directive is reached.
- The purpose of this directive is to make it more convenient to skip
- similar tests in a given file without having to remove or disable
- the tests completely.
+ Warn when still using select().
</para>
</listitem>
<listitem>
<para>
- Let test level 17 depend on FEATURE_64_BIT_TIME_T
- instead of FEATURE_PTHREAD which has no direct connection
- to the time_t size.
+ Warn when compiling without calloc().
</para>
</listitem>
<listitem>
<para>
- Fix indentation in perldoc examples.
+ Make it more obvious that the --with-fdsetsize configure switch
+ is pointless if poll() is available.
</para>
</listitem>
<listitem>
<para>
- Don't overlook directives in the first line of the action file.
+ Remove support for AmigaOS.
</para>
</listitem>
<listitem>
<para>
- Bump version to 0.7.
+ Update windows build system to use supported software.
+ The cygwin gcc -mno-cygwin option is no longer supported, so
+ convert the windows build system to use the cygwin cross-compiler
+ to build "native" code.
</para>
</listitem>
<listitem>
<para>
- Fix detection of the Privoxy version now that https://
- is used for the website.
+ Add --enable-static-linking option for configure
+ does the same thing as LDFLAGS=-static; ./configure
+ but nicer than mixing evars and configure options.
</para>
</listitem>
</itemizedlist>
+ </para>
</listitem>
</itemizedlist>