# Sample Configuration file for Privoxy
#
-# $Id: config,v 1.32 2002/04/02 20:11:35 oes Exp $
-#
-
-# Table of Contents
-#
-# 1. INTRODUCTION
-# 2. FORMAT OF THE CONFIGURATION FILE
-# 3. OTHER CONFIGURATION FILES
-# 4. GENERAL OPTIONS
-# 5. WINDOWS GUI OPTIONS
-#
-# 1. INTRODUCTION
+# $Id: config,v 1.33 2002/04/15 19:06:43 jongfoster Exp $
+#
+###################################################################
+# #
+# Table of Contents #
+# #
+# I. INTRODUCTION #
+# II. FORMAT OF THE CONFIGURATION FILE #
+# #
+# 1. CONFIGURATION AND LOG FILE LOCATIONS #
+# 2. LOCAL SET-UP DOCUMENTATION #
+# 3. DEBUGGING #
+# 4. ACCESS CONTROL AND SECURITY #
+# 5. FORWARDING #
+# 6. WINDOWS GUI OPTIONS #
+# #
+###################################################################
+
+# I. INTRODUCTION
+# ===============
#
# This file holds the Privoxy configuration. If you modify this
# file, you will need to send a couple of requests to the proxy
# this file with the name 'config.txt' in the same directory where
# Privoxy is installed.
#
-# 2. FORMAT OF THE CONFIGURATION FILE
+
+# II. FORMAT OF THE CONFIGURATION FILE
+# ====================================
#
# Configuration lines consist of an initial keyword followed by a list
# of values, all separated by whitespace (any number of spaces or
#
# Thus, by placing a # at the start of an existing configuration line,
# you can make it a comment and it will be treated as if it weren't there.
-# This is called "commenting out" an option and can be useful to turn
-# off features: If you comment out the "logfile" line, Privoxy will
-# not log to a file at all.
-#
-# Watch for the "default:" section in each explanation to see what
-# happens if the option is left unset (or commented out).
+# This is called "commenting out" an option and can be useful.
#
-# NOTE: THAT DEFAULT IS NOT NECESSARILY EQUAL TO THE OPTION
-# VALUE SET IN THIS SAMPLE CONFIG FILE.
+# Note that commenting out and option and leaving it at its default
+# are two completely different things! Most options behave very
+# differently when unset. See the the "Effect if unset" explanation
+# in each option's description for details.
#
# Long lines can be continued on the next line by using a `\' as
# the last character.
#
-# 3. OTHER CONFIGURATION FILES
-#
-# Privoxy uses a number of other files to tell it what ads to
-# block, what cookies to accept, etc. This section of the
-# configuration file tells Privoxy where to find all those other
-# files.
-#
-# Privoxy looks for these files in the directory specified with
-# "confdir" option.
-#
-# (Note that on Windows, Privoxy usually starts with the current
-# directory (".") being the same directory as the executable)
-#
-# An absolute path name can be used to avoid problems.
-#
-# While we go modular and multiuser, the blocker, filter, and
-# per-user config will be stored in subdirectories of confdir.
-# Now, only confdir/templates is used for storing HTML templates
-# for CGI results.
+
+# 1. CONFIGURATION AND LOG FILE LOCATIONS
+# =======================================
#
-# No trailing /, please.
+# Privoxy can (and normally does) use a number of other files for
+# additional configuration and logging. This section of the
+# configuration file tells Privoxy where to find those other files.
+#
+# 1.1. confdir
+# ============
+#
+# Specifies:
+#
+# The directory where the other configuration files are located
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please
+#
+# When development goes modular and multi-user, the blocker,
+# filter, and per-user config will be stored in subdirectories of
+# "confdir". For now, the configuration directory structure is
+# flat, except for confdir/templates, where the HTML templates for
+# CGI output reside (e.g. Privoxy's 404 error page).
+#
confdir .
-#
-# The directory where all logging (i.e. logfile and jarfile) takes place
-# No trailing /, please.
+
+# 1.2. logdir
+# ===========
+#
+# Specifies:
+#
+# The directory where all logging takes place (i.e. where logfile
+# and jarfile are located)
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please
#
logdir .
-# Note that all file specifications below are relative to
-# the above two directories!!!
-# The actions file contains patterns to specify the
-# actions to apply to requests for each site.
-#
-# Default: Cookies to and from all destinations are filtered.
-# Popups are disabled for all sites.
-# All sites are filtered if filterfile specified.
-# No sites are blocked. Nothing is an image.
+# 1.3. actionsfile
+# ================
+#
+# Specifies:
+#
+# The actions file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# default.action (Unix) or default.action.txt (Windows)
+#
+# Effect if unset:
+#
+# No action is taken at all. Simple neutral proxying.
+#
+# Notes:
+#
+# There is no point in using Privoxy without an actions file. There
+# are three different actions files included in the distribution,
+# with varying degrees of aggressiveness: default.action,
+# intermediate.action and advanced.action.
#
actionsfile default.action
-# The filterfile contains content modification rules. These rules
-# permit powerful changes on the content of Web pages, e.g., you
-# could disable your favourite JavaScript annoyances, rewrite the
-# actual content, or just have some fun replacing "Microsoft"
-# with "Microsuck" wherever it appears on a Web page.
-#
-# Default: content modification. (see '+-filter' in actionsfile)
-#
+
+# 1.4. filterfile
+# ===============
+#
+# Specifies:
+#
+# The filter file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# default.filter (Unix) or default.filter.txt (Windows)
+#
+# Effect if unset:
+#
+# No textual content filtering takes place, i.e. all +filter{name}
+# actions in the actions file are turned off
+#
+# Notes:
+#
+# The "default.filter" file contains content modification rules
+# that use "regular expressions". These rules permit powerful
+# changes on the content of Web pages, e.g., you could disable your
+# favorite JavaScript annoyances, re-write the actual displayed
+# text, or just have some fun replacing "Microsoft" with
+# "MicroSuck" wherever it appears on a Web page.
+#
filterfile default.filter
-#
-# The logfile is where all logging and error messages are written.
-# The logfile can be useful for tracking down a problem with
-# Privoxy (e.g., it's not blocking an ad you think it should
-# block) but in most cases you probably will never look at it.
-#
-# Your logfile will grow indefinitely, and you will probably want to
-# periodically remove it. On Unix systems, you can do this with a
-# cron job (see 'man cron').
-#
-# On SuSE Linux systems, you can place a line like
-# "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
-# with the effect that cron.daily will automatically archive, gzip,
-# and empty the log, when it exceeds 1M size.
-#
-# Default: Log to the standard error channel, not to a file
-#
+
+# 1.5. logfile
+# ============
+#
+# Specifies:
+#
+# The log file to use
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# logfile (Unix) or privoxy.log (Windows)
+#
+# Effect if unset:
+#
+# No log file is used, all log messages go to the console
+# (stderr).
+#
+# Notes:
+#
+# The windows version will additionally log to the console.
+#
+# The logfile is where all logging and error messages are written.
+# The level of detail and number of messages are set with the debug
+# option (see below). The logfile can be useful for tracking down a
+# problem with Privoxy (e.g., it's not blocking an ad you think it
+# should block) but in most cases you probably will never look at
+# it.
+#
+# Your logfile will grow indefinitely, and you will probably want
+# to periodically remove it. On Unix systems, you can do this with
+# a cron job (see "man cron"). For Red Hat, a logrotate script has
+# been included.
+#
+# On SuSE Linux systems, you can place a line like
+# "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
+# with the effect that cron.daily will automatically archive, gzip,
+# and empty the log, when it exceeds 1M size.
+#
+#
logfile logfile
-#
-# The jarfile defines where Privoxy stores the cookies it
-# intercepts. Note that if you use a jarfile, it may grow quite
-# large.
-#
-# Default: Don't store intercepted cookies
-#
+
+# 1.6. jarfile
+# ============
+#
+# Specifies:
+#
+# The file to store intercepted cookies in
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# jarfile (Unix) or privoxy.jar (Windows)
+#
+# Effect if unset:
+#
+# Intercepted cookies are not stored at all.
+#
+# Notes:
+#
+# The jarfile may grow to ridiculous sizes over time.
+#
jarfile jarfile
-#
-# If you specify a trustfile, Privoxy will only allow access
-# to sites that are named in the trustfile. You can also mark
-# sites as trusted referrers, with the effect that access to
-# untrusted sites will be granted, if a link from a trusted
-# referrer was used. The link target will then be added to the
-# trustfile.
-# Note that this is a very restrictive feature that typical users
-# most propably want to leave disabled.
-#
-# Default: Don't use the trust mechanism
-#
+
+# 1.7. trustfile
+# ==============
+#
+# Specifies:
+#
+# The trust file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: trust (Unix) or trust.txt
+# (Windows)
+#
+# Effect if unset:
+#
+# The whole trust mechanism is turned off.
+#
+# Notes:
+#
+# The trust mechanism is an experimental feature for building
+# white-lists and should be used with care. It is NOT recommended
+# for the casual user.
+#
+# If you specify a trust file, Privoxy will only allow access to
+# sites that are named in the trustfile. You can also mark sites as
+# trusted referrers (with +), with the effect that access to
+# untrusted sites will be granted, if a link from a trusted
+# referrer was used. The link target will then be added to the
+# "trustfile". Possible applications include limiting Internet
+# access for children.
+#
+# If you use + operator in the trust file, it may grow considerably
+# over time.
+#
#trustfile trust
-#
-# If you use the trust mechanism, it is a good idea to write up
-# some online documentation about your blocking policy and to
-# specify the URL(s) here. They will appear on the page that
-# your users receive when they try to access untrusted content.
-# Use multiple times for multiple URLs.
-#
-# Default: Don't display links on the "untrusted" info page.
-#
+
+# 2. LOCAL SET-UP DOCUMENTATION
+# =============================
+#
+# If you intend to operate Privoxy for more users that just yourself,
+# it might be a good idea to let them know how to reach you, what you
+# block and why you do that, your policies etc.
+#
+#
+# 2.1. trust-info-url
+# ===================
+#
+# Specifies:
+#
+# A URL to be displayed in the error page that users will see if
+# access to an untrusted page is denied.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Two example URL are provided
+#
+# Effect if unset:
+#
+# No links are displayed on the "untrusted" error page.
+#
+# Notes:
+#
+# The value of this option only matters if the experimental trust
+# mechanism has been activated. (See trustfile above.)
+#
+# If you use the trust mechanism, it is a good idea to write up
+# some on-line documentation about your trust policy and to specify
+# the URL(s) here. Use multiple times for multiple URLs.
+#
+# The URL(s) should be added to the trustfile as well, so users
+# don't end up locked out from the information on why they were
+# locked out in the first place!
+#
trust-info-url http://www.example.com/why_we_block.html
trust-info-url http://www.example.com/what_we_allow.html
-# 4. OPTIONS
-#
-# This part of the configuration file contains options that control
-# how Privoxy operates.
-#
-# Admin-address should be set to the email address of the proxy
-# administrator. It is used in many of the proxy-generated pages.
-#
-# Default: Do not display an e-mail address
+# 2.2. admin-address
+# ==================
+#
+# Specifies:
+#
+# An email address to reach the proxy administrator.
+#
+# Type of value:
+#
+# Email address
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No email address is displayed on error pages and the CGI user
+# interface.
+#
+# Notes:
+#
+# Highly recommended for multi-user installations.
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not be
+# shown.
#
#admin-address privoxy-admin@example.com
-#
-# Proxy-info-url can be set to a URL that contains more info about
-# this Privoxy installation, it's configuration and policies.
-# It is used in many of the proxy-generated pages and its use is
-# highly recommended, since your users will want to know why certain
-# content is blocked or modified.
-#
-# Default: Don't show a link to online documentation
-#
+
+# 2.3. proxy-info-url
+# ===================
+#
+# Specifies:
+#
+# A URL to documentation about the local Privoxy setup,
+# configuration or policies.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No link to local documentation is displayed on error pages and
+# the CGI user interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not be
+# shown.
+#
+# This URL shouldn't be blocked ;-)
+#
#proxy-info-url http://www.example.com/proxy-service.html
-#
-# Listen-address specifies the address and port where Privoxy will
-# listen for connections from your Web browser. The default is to
-# listen on the local host on port 8118, and this is suitable for
-# most users. (In your web browser, under proxy configuration, list
-# the proxy server as 'localhost' and the port as '8118').
+# 3. DEBUGGING
+# ============
+#
+# These options are mainly useful when tracing a problem. Note that you
+# might also want to invoke Privoxy with the --no-daemon command line
+# option when debugging.
#
-# If you already have another service running on port 8118, or if you
-# want to serve requests from other machines (e.g. on your local
-# network) as well, you will need to override the default. The syntax
-# is "listen-address [<ip-address>]:<port>" If you leave out the ip
-# adress, Privoxy will bind to all interfaces (addresses) on your
-# machine and may become reachable from the internet. In that case,
-# consider using access control lists (acl's) (see "aclfile" above).
-#
-# For example, suppose you are running Privoxy on a machine which
-# has the address 192.168.0.1 on your local private network
-# (192.168.0.0) and has another outside connection with a different
-# address. You want it to serve requests from inside only:
-#
-# listen-address 192.168.0.1:8118
-#
-# If you want it to listen on all addresses (including the outside
-# connection):
-#
-# listen-address :8118
-#
-# If you do this, consider using acls (see "aclfile" above).
-#
-# Note: you will need to point your browser(s) to the address
-# and port that you have configured here.
-#
-# Default: listen-address localhost:8118
-# listen-address 127.0.0.1:8118
-#
-listen-address 127.0.0.1:8118
-
-#
-# The debug option sets the level of debugging information to log in
-# the logfile (and to the console in the Windows version). A debug
-# level of 1 is informative because it will show you each request as
-# it happens. Higher levels of debug are probably only of interest
-# to developers.
-#
-# debug 1 # GPC = show each GET/POST/CONNECT request
-# debug 2 # CONN = show each connection status
-# debug 4 # IO = show I/O status
-# debug 8 # HDR = show header parsing
-# debug 16 # LOG = log all data into the logfile
-# debug 32 # FRC = debug force feature
-# debug 64 # REF = debug regular expression filter
-# debug 128 # = debug fast redirects
-# debug 256 # = debug GIF deanimation
-# debug 512 # CLF = Common Log Format
-# debug 1024 # = debug kill popups
-# debug 4096 # INFO = Startup banner and warnings.
-# debug 8192 # ERROR = Non-fatal errors
-#
-# It is *highly recommended* that you enable ERROR
-# reporting. (debug 8192).
-#
-# The reporting of FATAL errors (i.e. ones which crash
-# Privoxy) is always on and cannot be disabled.
-#
-# If you want to use CLF, you should set "debug 512" ONLY,
-# do not enable anything else.
-#
-# Multiple "debug" directives, are OK - they're logical-OR'd
-# together.
-#
-# debug 15 # same as setting the first 4 listed above
-#
-# Default: 0, i.e. log nothing but fatal errors
-#
-debug 1 # URLs
-debug 4096 # Info
+#
+# 3.1. debug
+# ==========
+#
+# Specifies:
+#
+# Key values that determine what information gets logged.
+#
+# Type of value:
+#
+# Integer values
+#
+# Default value:
+#
+# 12289 (i.e.: URLs plus warnings and errors)
+#
+# Effect if unset:
+#
+# Nothing gets logged.
+#
+# Notes:
+#
+# The available debug levels are:
+#
+# debug 1 # show each GET/POST/CONNECT request
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data into the logfile
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filter
+# debug 128 # debug fast redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # debug kill pop-ups
+# debug 4096 # Startup banner and warnings
+# debug 8192 # Non-fatal errors
+#
+#
+# To select multiple debug levels, you can either add them or use
+# multiple debug lines.
+#
+# A debug level of 1 is informative because it will show you each
+# request as it happens. 1, 4096 and 8192 are highly recommended so
+# that you will notice when things go wrong. The other levels are
+# probably only of interest if you are hunting down a specific
+# problem. They can produce a hell of an output (especially 16).
+#
+# The reporting of fatal errors (i.e. ones which crash Privoxy) is
+# always on and cannot be disabled.
+#
+# If you want to use CLF (Common Log Format), you should set "debug
+# 512" ONLY and not enable anything else.
+#
+debug 1 # show each GET/POST/CONNECT request
+debug 4096 # Startup banner and warnings
debug 8192 # Errors - *we highly recommended enabling this*
-#
-# Privoxy normally uses "multi-threading", a software technique
-# that permits it to handle many different requests simultaneously.
-# In some cases you may wish to disable this -- particularly if
-# you're trying to debug a problem. The 'single-threaded' option
-# forces Privoxy to handle requests sequentially.
-#
-# Default: Multithreaded mode
-#
-#single-threaded
-#
-# 'toggle' allows you to temporarily disable all Privoxy's
-# filtering. Just set "toggle 0".
+# 3.2. single-threaded
+# ====================
+#
+# Specifies:
+#
+# Whether to run only one server thread
+#
+# Type of value:
+#
+# None
+#
+# Default value:
#
-# This can now be toggled remotely, through the web-based config
-# interface. There is no reason to edit this file any more.
-#
-# The Windows version of Privoxy puts an icon in the system
-# tray, which allows you to change this option without having
-# to edit this file. If you right-click on that icon (or select
-# the 'Options' menu), one choice is "Enable". Clicking on enable
-# toggles Privoxy on and off. This is useful if you want to
-# temporarily disable Privoxy, e.g., to access a site that
-# requires cookies which you normally have blocked.
-#
-# 'toggle 1' means Privoxy runs normally, 'toggle 0' means
-# that Privoxy becomes a non-anonymizing non-blocking
-# proxy.
-#
-# Default: 1
-#
-toggle 1
+# Unset
+#
+# Effect if unset:
+#
+# Multi-threaded (or, where unavailable: forked) operation, i.e.
+# the ability to serve multiple requests simultaneously.
+#
+# Notes:
+#
+# This option is only there for debug purposes and you should never
+# need to use it. It will drastically reduce performance.
+#
+#single-threaded
-#
-# For content filtering, i.e. the +filter and +deanimate-gif
-# actions, it is neccessary that Privoxy buffers up the
-# whole document body. This can be potentially dangerous, since
-# a server could just keep sending data indefinitely and wait
-# for your RAM to exhaust.
-# The buffer-limit option lets you set the size in Kbytes that
-# each buffer may use at maximum. When the documents buffer
-# exceeds that size, it is flushed to the client unfiltered and
-# no further attempt to filter the rest of it is taken.
-# Remember that there may multiple threads running, which might
-# require up to buffer-limit Kbytes *each*, unless you have set
-# single-threaded below.
-#
-# Default: 4096, i.e. 4 MB
-#
-buffer-limit 4096
+# 4. ACCESS CONTROL AND SECURITY
+# ==============================
+#
+# This section of the config file controls the security-relevant
+# aspects of Privoxy's configuration.
+#
+#
+# 4.1. listen-address
+# ===================
+#
+# Specifies:
+#
+# The IP address and TCP port on which Privoxy will listen for
+# client requests.
+#
+# Type of value:
+#
+# [IP-Address]:Port
+#
+# Default value:
+#
+# localhost:8118
+#
+# Effect if unset:
+#
+# Bind to localhost (127.0.0.1), port 8118. This is suitable and
+# recommended for home users who run Privoxy on the same machine as
+# their browser.
+#
+# Notes:
+#
+# You will need to configure your browser(s) to this proxy address
+# and port.
+#
+# If you already have another service running on port 8118, or if
+# you want to serve requests from other machines (e.g. on your
+# local network) as well, you will need to override the default.
+#
+# If you leave out the IP address, Privoxy will bind to all
+# interfaces (addresses) on your machine and may become reachable
+# from the Internet. In that case, consider using access control
+# lists (acl's) (see "ACLs" below), or a firewall.
+#
+# Example:
+#
+# Suppose you are running Privoxy on a machine which has the
+# address 192.168.0.1 on your local private network (192.168.0.0)
+# and has another outside connection with a different address. You
+# want it to serve requests from inside only:
+#
+# listen-address 192.168.0.1:8118
+#
+listen-address 127.0.0.1:8118
-#
-# Enable the web-based actionsfile editor. Set to 1 to enable,
-# 0 to disable. Note that you must have compiled Privoxy
-# with support for this feature, otherwise this option has no
-# effect.
-#
-# Security note: If this is enabled, anyone who can use the proxy
-# can edit the actions file, and their changes will affect all users.
-# For shared proxies, you probably want to disable this.
-#
-# Default: Disabled
-#
-enable-edit-actions 1
+
+# 4.2. toggle
+# ===========
+#
+# Specifies:
+#
+# Initial state of "toggle" status
+#
+# Type of value:
+#
+# 1 or 0
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# Act as if toggled on
+#
+# Notes:
+#
+# If set to 0, Privoxy will start in "toggled off" mode, i.e.
+# behave like a normal, content-neutral proxy. See
+# enable-remote-toggle below. This is not really useful anymore,
+# since toggling is much easier via the web interface then via
+# editing the conf file.
+#
+# The windows version will only display the toggle icon in the
+# system tray if this option is present.
+#
+#
+toggle 1
-#
-# Allow Privoxy to be toggled on and off remotely, using your
-# web browser. Set to 1 to enable, 0 to disable. Note that you
-# must have compiled Privoxy with support for this feature,
-# otherwise this option has no effect.
-#
-# Security note: If this is enabled, anyone who can use the proxy
-# can toggle it on or off, and their changes will affect all users.
-# For shared proxies, you probably want to disable this.
-#
-# Default: Disabled
-#
+# 4.3. enable-remote-toggle
+# =========================
+#
+# Specifies:
+#
+# Whether or not the web-based toggle feature may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# The web-based toggle feature is disabled.
+#
+# Notes:
+#
+# When toggled off, Privoxy acts like a normal, content-neutral
+# proxy, i.e. it acts as if none of the actions applied to any
+# URL.
+#
+# For the time being, access to the toggle feature can not be
+# controlled separately by "ACLs" or HTTP authentication, so that
+# everybody who can access Privoxy (see "ACLs" and listen-address
+# above) can toggle it for all users. So this option is not
+# recommended for multi-user environments with untrusted users.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
enable-remote-toggle 1
-#############################################################################
-# Access Control List
-#############################################################################
-#
-# Access controls are included at the request of some ISPs and systems
-# administrators, and are not usually needed by individual users.
-# Please note the warnings in the FAQ that this proxy is not
-# intended to be a substitute for a firewall or to encourage anyone
-# to defer addressing basic security weaknesses.
-# For details see the documentation
-#
-# If no access settings are specified, the proxy talks to anyone that
-# connects. If any access settings file are specified, then the proxy
-# talks only to IP addresses permitted somewhere in this file and not
-# denied later in this file.
-#
-# Summary -- if using an ACL:
-#
-# Client must have permission to receive service
-# LAST match in ACL wins
-# Default behavior is to deny service
-#
-# Syntax for an entry in the Access Control List is:
-#
-# ACTION SRC_ADDR[/SRC_MASKLEN] [ DST_ADDR[/DST_MASKLEN] ]
-#
-# where the fields are
-#
-# ACTION = "permit-access" | "deny-access"
-#
-# SRC_ADDR = client hostname or dotted IP address
-# SRC_MASKLEN = number of bits in the subnet mask for the source
-#
-# DST_ADDR = server or forwarder hostname or dotted IP address
-# DST_MASKLEN = number of bits in the subnet mask for the target
-#
-# field separator (FS) is whitespace (space or tab)
-#
-# IMPORTANT NOTE
-# ==============
-# If Privoxy is using a forwarder or a gateway for a particular
-# destination URL, the DST_ADDRR that is examined is the address of
-# the forwarder or the gateway and NOT the address of the ultimate target.
-# This is necessary because it may be impossible for the local
-# Privoxy to determine the address of the ultimate target
-# (that's often what gateways are used for).
-#
-# Here are a few examples to show how the ACL works:
-#
-# localhost is OK -- no DST_ADDR implies that ALL destination addresses are OK
-# permit-access localhost
-#
-# a silly example to illustrate:
-#
-# permit any host on the class-C subnet with our web server to go
-# anywhere
-#
-# permit-access www.example.com/24
-#
-# except deny one particular IP address from using it at all
-#
-# deny-access hacker.example.com
-#
-# another example
-#
-# You can specify an explicit network address and subnet mask.
-# Explicit addresses do not have to be resolved to be used.
-#
-# permit-access 207.153.200.0/24
-#
-# a subnet mask of 0 matches anything, so the next line permits everyone.
-#
-# permit-access 0.0.0.0/0
-#
-# Note: you cannot say
-#
-# permit-access .org
-#
-# to allow all .org domains; every IP-address listed must resolve fully.
-#
-# An ISP may want to provide a Privoxy that is accessible by "the world"
-# and yet restrict use of some of their private content to hosts on its
-# internal network (i.e. its own subscribers). Say, for instance the
-# ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask).
-# This is how they could do it:
-#
-# permit-access 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
-# # with the following exceptions:
-#
-# deny-access 0.0.0.0/0 123.124.0.0/16 # block all external requests for
-# # sites on the ISP's network
-#
-# permit 0.0.0.0/0 www.my_isp.com # except for the ISP's main web site
-#
-# permit 123.124.0.0/16 0.0.0.0/0 # the ISP's clients can go anywhere
-#
-# Note that some hostnames may be listed with multiple IP addresses;
-# the primary value returned by gethostbyname() is used.
-#
-# Default: Anyone can access the proxy.
-
-
-#############################################################################
-# Forwarding
-#############################################################################
-#
-#
-# This feature allows routing of HTTP requests via multiple proxies.
-# It can be used to better protect privacy and confidentiality when
-# accessing specific domains by routing requests to those domains
-# to a special purpose filtering proxy such as lpwa.com
-#
-# It can also be used in an environment with multiple networks to route
-# requests via multiple gateways allowing transparent access to multiple
-# networks without having to modify browser configurations.
-#
-# Also specified here are SOCKS proxies. We support SOCKS 4 and SOCKS 4A.
-# The difference is that SOCKS 4A will resolve the target hostname using
-# DNS on the SOCKS server, not our local DNS client.
-#
-# The syntax of each line is
-#
-# forward target_domain[:port] http_proxy_host[:port]
-# forward-socks4 target_domain[:port] socks_proxy_host[:port] http_proxy_host[:port]
-# forward-socks4a target_domain[:port] socks_proxy_host[:port] http_proxy_host[:port]
-#
-# If http_proxy_host is ".", then requests are not forwarded to
-# a HTTP proxy but are made directly to the web servers.
-#
-# Lines are checked in turn, and the last match wins.
-#
-# There is an implicit line equivalent to the following, which specifies that
-# anything not finding a match on the list is to go out without forwarding
-# or gateway protocol; like so:
-# forward .* . # implicit
-#
-# In the following common configuration, everything goes to Lucent's LPWA,
-# except SSL on port 443 (which it doesn't handle)
-# forward .* lpwa.com:8118
-# forward :443 .
-#
-# See the FAQ for instructions on how to automate the login procedure for LPWA.
-# Some users have reported difficulties related to LPWA's use of . as the
-# last element of the domain, and have said that this can be fixed with this:
-# forward lpwa. lpwa.com:8118
-# (NOTE: the syntax for specifiying target_domain has changed since the
-# previous paragraph weas written - it will not work now. More information
-# is welcome.)
-#
-# In this fictitious example, everything goes via an ISP's caching proxy,
-# except requests to that ISP:
-#
-# forward .* caching.myisp.net:8118
-# forward myisp.net .
-#
-# For the @home network, we're told the forwarding configuration is this:
-# forward .* proxy:8080
-# Also, we're told they insist on getting cookies and Javascript, so you need
-# to add home.com to the cookie file. We consider Javascript a security risk;
-# see our page on cookies. Java need not be enabled.
-#
-# In this example direct connections are made to all "internal" domains,
-# but everything else goes through Lucent's LPWA by way of the company's
-# SOCKS gateway to the Internet.
-#
-# forward-socks4 .* lpwa.com:8118 firewall.my_company.com:1080
-# forward my_company.com .
-#
-# This is how you could set up a site that always uses SOCKS but no forwarders
-#
-# forward-socks4a .* . firewall.my_company.com:1080
-#
-# An advanced example for network administrators:
-#
-# If you have links to multiple ISPs that provide various special content to
-# their subscribers, you can configure forwarding to pass requests to the
-# specific host that's connected to that ISP so that everybody can see all
-# of the content on all of the ISPs.
-#
-# This is tricky, but here's a sample:
-#
-# host-a has a PPP connection to isp-a.com
-# host-b has a PPP connection to isp-b.com
-#
-# host-a can run Privoxy with forwarding like this:
-# forward .* .
-# forward isp-b.com host-b:8118
-#
-# host-b can run Privoxy with forwarding like this:
-# forward .* .
-# forward isp-a.com host-a:8118
-#
-# Now, *anyone* on the Internet (including users on host-a and host-b)
-# can set their browser's proxy to *either* host-a or host-b and
-# be able to browse the content on isp-a or isp-b.
-#
-#
-# Here's another practical example, for University of Kent at
-# Canterbury students with a network connection in their room, who
-# need to use the University's Squid web cache.
-#
-# forward *. ssbcache.ukc.ac.uk:3128 # Use the proxy, except for:
-# forward .ukc.ac.uk . # Anything on the same domain as us
-# forward * . # Host with no domain specified
-# forward 129.12.*.* . # A dotted IP on our /16 network.
-# forward 127.*.*.* . # Loopback address
-# forward localhost.localdomain . # Loopback address
-# forward www.ukc.mirror.ac.uk . # Specific host
-#
-#
-# Note: If you intend to chain Privoxy and squid locally, the chain
-# broswer -> squid -> Privoxy is the recommended way.
-#
-# Your squid configuration could then look like this:
-#
-# # Define Privoxy as parent cache
-# cache_peer 127.0.0.1 8118 parent 0 no-query
-#
-# # Define ACL for protocol FTP
-# acl FTP proto FTP
-#
-# # Do not forward ACL FTP to Privoxy
-# always_direct allow FTP
-#
-# # Do not forward ACL CONNECT (https) to Privoxy
-# always_direct allow CONNECT
-#
-# # Forward the rest to Privoxy
-# never_direct allow all
-#
-#############################################################################
-# 5. WINDOWS GUI OPTIONS
-#############################################################################
-#
-# Privoxy has a number of options specific to the Windows GUI
-# interface:
-#
-# activity-animation {1 or 0}
-#
-# If set to 1, the Privoxy icon will animate when Privoxy is
-# active.
-#
-#Win32-only: activity-animation 1
+# 4.4. enable-edit-actions
+# ========================
+#
+# Specifies:
+#
+# Whether or not the web-based actions file editor may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# The web-based actions file editor is disabled.
+#
+# Notes:
+#
+# For the time being, access to the editor can not be controlled
+# separately by "ACLs" or HTTP authentication, so that everybody
+# who can access Privoxy (see "ACLs" and listen-address above) can
+# modify its configuration for all users. So this option is not
+# recommended for multi-user environments with untrusted users.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-edit-actions 1
-# log-messages {1 or 0}
-#
-# If set to 1, Privoxy will log messages to the console window.
-#
-#Win32-only: log-messages 1
-# log-buffer-size {1 or 0}?
-#
-# If log-buffer-size is set to 1, the size of the log buffer, that
-# is the amount of memory used for the log messages displayed in
-# the console window, will be limited to 'log-max-lines' (see below).
-#
-# Warning: Setting this to 0 will result in the buffer to grow
-# infinitely and eat up all your memory!
-#
-#Win32-only: log-buffer-size 1
+# 4.5. ACLs: permit-access and deny-access
+# ========================================
+#
+# Specifies:
+#
+# Who can access what.
+#
+# Type of value:
+#
+# src_addr[/src_masklen] [dst_addr[/dst_masklen]]
+#
+# Where src_addr and dst_addr are IP addresses in dotted decimal
+# notation or valid DNS names, and src_masklen and dst_masklen are
+# subnet masks in CIDR notation, i.e. integer values from 2 to 32
+# representing the length (in bits) of the network address. The
+# masks and the whole destination part are optional.
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't restrict access further than implied by listen-address
+#
+# Notes:
+#
+# Access controls are included at the request of ISPs and systems
+# administrators, and are not usually needed by individual users.
+# For a typical home user, it will normally suffice to ensure that
+# Privoxy only listens on the localhost or internal (home) network
+# address by means of the listen-address option.
+#
+# Please see the warnings in the FAQ that this proxy is not
+# intended to be a substitute for a firewall or to encourage anyone
+# to defer addressing basic security weaknesses.
+#
+# Multiple ACL lines are OK. If any ACLs are specified, then the
+# Privoxy talks only to IP addresses that match at least one
+# permit-access line and don't match any subsequent deny-access
+# line. In other words, the last match wins, with the default being
+# deny-access.
+#
+# If Privoxy is using a forwarder (see forward below) for a
+# particular destination URL, the dst_addr that is examined is the
+# address of the forwarder and NOT the address of the ultimate
+# target. This is necessary because it may be impossible for the
+# local Privoxy to determine the IP address of the ultimate target
+# (that's often what gateways are used for).
+#
+# You should prefer using IP addresses over DNS names, because the
+# address lookups take time. All DNS names must resolve! You can
+# not use domain patterns like "*.org" or partial domain names. If
+# a DNS name resolves to multiple IP addresses, only the first one
+# is used.
+#
+# Denying access to particular sites by ACL may have undesired side
+# effects if the site in question is hosted on a machine which also
+# hosts other sites.
+#
+# Examples:
+#
+# Explicitly define the default behavior if no ACL and
+# listen-address are set: "localhost" is OK. The absence of a
+# dst_addr implies that all destination addresses are OK:
+#
+# permit-access localhost
+#
+#
+# Allow any host on the same class C subnet as www.privoxy.org
+# access to nothing but www.example.com:
+#
+# permit-access www.privoxy.org/24 www.example.com/32
+#
+#
+# Allow access from any host on the 26-bit subnet 192.168.45.64 to
+# anywhere, with the exception that 192.168.45.73 may not access
+# www.dirty-stuff.example.com:
+#
+# permit-access 192.168.45.64/26
+# deny-access 192.168.45.73 www.dirty-stuff.example.com
+#
+
+
+# 4.6. buffer-limit
+# =================
+#
+# Specifies:
+#
+# Maximum size of the buffer for content filtering.
+#
+# Type of value:
+#
+# Size in Kbytes
+#
+# Default value:
+#
+# 4096
+#
+# Effect if unset:
+#
+# Use a 4MB (4096 KB) limit.
+#
+# Notes:
+#
+# For content filtering, i.e. the +filter and +deanimate-gif
+# actions, it is necessary that Privoxy buffers the entire document
+# body. This can be potentially dangerous, since a server could
+# just keep sending data indefinitely and wait for your RAM to
+# exhaust -- with nasty consequences. Hence this option.
+#
+# When a document buffer size reaches the buffer-limit, it is
+# flushed to the client unfiltered and no further attempt to filter
+# the rest of the document is made. Remember that there may be
+# multiple threads running, which might require up to buffer-limit
+# Kbytes each, unless you have enabled "single-threaded" above.
+#
+buffer-limit 4096
-# log-max-lines {number of lines, e.g., '200'}
-#
-# Maximum number of lines held in the log buffer. See above.
-#
-#Win32-only: log-max-lines 200
-# log-highlight-messages {1 or 0}
-#
-# If set to 1, Privoxy will highlight portions of the log
-# messages with a bold-faced font.
-#
-#Win32-only: log-highlight-messages 1
+# 5. FORWARDING
+# =============
+#
+# This feature allows routing of HTTP requests through a chain of
+# multiple proxies. It can be used to better protect privacy and
+# confidentiality when accessing specific domains by routing requests
+# to those domains through an anonymous public proxy (see e.g.
+# http://www.multiproxy.org/anon_list.htm) Or to use a caching proxy to
+# speed up browsing. Or chaining to a parent proxy may be necessary
+# because the machine that Privoxy runs on has no direct Internet
+# access.
+#
+# Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4
+# and SOCKS 4A protocols.
+#
-# log-font-name {font name, e.g., 'Comic Sans MS'}
-#
-# The font used in the console window.
-#
-#Win32-only: log-font-name Comic Sans MS
-# log-font-size {font size in points, e.g., '8'}
-#
-# Font size used in the console window.
-#
-#Win32-only: log-font-size 8
+# 5.1. forward
+# ============
+#
+# Specifies:
+#
+# To which parent HTTP proxy specific requests should be routed.
+#
+# Type of value:
+#
+# target_domain[:port] http_parent[:port]
+#
+# Where target_domain is a domain name pattern (see the chapter on
+# domain matching in the actions file), http_parent is the address
+# of the parent HTTP proxy as an IP addresses in dotted decimal
+# notation or as a valid DNS name (or "." to denote "no
+# forwarding", and the optional port parameters are TCP ports, i.e.
+# integer values from 1 to 64535
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use parent HTTP proxies.
+#
+# Notes:
+#
+# If http_parent is ".", then requests are not forwarded to another
+# HTTP proxy but are made directly to the web servers.
+#
+# Multiple lines are OK, they are checked in sequence, and the last
+# match wins.
+#
+# Examples:
+#
+# Everything goes to an example anonymizing proxy, except SSL on
+# port 443 (which it doesn't handle):
+#
+# forward .* anon-proxy.example.org:8080
+# forward :443 .
+#
+#
+# Everything goes to our example ISP's caching proxy, except for
+# requests to that ISP's sites:
+#
+# forward .*. caching-proxy.example-isp.net:8000
+# forward .example-isp.net .
+#
+
+
+# 5.2. forward-socks4 and forward-socks4a
+# =======================================
+#
+# Specifies:
+#
+# Through which SOCKS proxy (and to which parent HTTP proxy)
+# specific requests should be routed.
+#
+# Type of value:
+#
+# target_domain[:port] socks_proxy[:port] http_parent[:port]
+#
+# Where target_domain is a domain name pattern (see the chapter on
+# domain matching in the actions file), http_parent and socks_proxy
+# are IP addresses in dotted decimal notation or valid DNS names
+# (http_parent may be "." to denote "no HTTP forwarding"), and the
+# optional port parameters are TCP ports, i.e. integer values from
+# 1 to 64535
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use SOCKS proxies.
+#
+# Notes:
+#
+# Multiple lines are OK, they are checked in sequence, and the last
+# match wins.
+#
+# The difference between forward-socks4 and forward-socks4a is that
+# in the SOCKS 4A protocol, the DNS resolution of the target
+# hostname happens on the SOCKS server, while in SOCKS 4 it happens
+# locally.
+#
+# If http_parent is ".", then requests are not forwarded to another
+# HTTP proxy but are made (HTTP-wise) directly to the web servers,
+# albeit through a SOCKS proxy.
+#
+# Examples:
+#
+# From the company example.com, direct connections are made to all
+# "internal" domains, but everything outbound goes through their
+# ISP's proxy by way of example.com's corporate SOCKS 4A gateway to
+# the Internet.
+#
+# forward-socks4a .*. socks-gw.example.com:1080 www-cache.example-isp.net:8080
+# forward .example.com .
+#
+#
+# A rule that uses a SOCKS 4 gateway for all destinations but no
+# HTTP parent looks like this:
+#
+# forward-socks4 .*. socks-gw.example.com:1080 .
+#
+# See the user manual for more advanced examples.
+#
-# show-on-task-bar {1 or 0}
-#
-# Controls whether or not Privoxy will appear as a button on the Task
-# bar when minimized.
-#
-#Win32-only: show-on-task-bar 0
+# 6. WINDOWS GUI OPTIONS
+# ======================
+#
+# Privoxy has a number of options specific to the Windows GUI
+# interface:
+#
+# If "activity-animation" is set to 1, the Privoxy icon will animate
+# when "Privoxy" is active. To turn off, set to 0.
+#
+#activity-animation 1
-# close-button-minimizes 1
-#
-# If set, the Windows close button will minimize Privoxy instead
-# of closing the program (close with the exit option on the File
-# menu).
-#
-#Win32-only: close-button-minimizes 1
+# If "log-messages" is set to 1, Privoxy will log messages to the
+# console window:
+#
+#log-messages 1
+
+# If "log-buffer-size" is set to 1, the size of the log buffer, i.e.
+# the amount of memory used for the log messages displayed in the
+# console window, will be limited to "log-max-lines" (see below).
+#
+# Warning: Setting this to 0 will result in the buffer to grow
+# infinitely and eat up all your memory!
+#
+#log-buffer-size 1
+# log-max-lines is the maximum number of lines held in the log buffer.
+# See above.
+#
+#log-max-lines 200
+# If "log-highlight-messages" is set to 1, Privoxy will highlight
+# portions of the log messages with a bold-faced font:
+#
+#log-highlight-messages 1
+#
+
+# The font used in the console window:
+#
+#log-font-name Comic Sans MS
+#
+
+# Font size used in the console window:
+#
+#log-font-size 8
+#
+
+# "show-on-task-bar" controls whether or not Privoxy will appear as a
+# button on the Task bar when minimized:
+#
+#show-on-task-bar 0
+#
+
+# If "close-button-minimizes" is set to 1, the Windows close button
+# will minimize Privoxy instead of closing the program (close with the
+# exit option on the File menu).
+#
+#close-button-minimizes 1
+#
+
+# The "hide-console" option is specific to the MS-Win console version
+# of Privoxy. If this option is used, Privoxy will disconnect from and
+# hide the command console.
+#
+#hide-console
#
-# This option is specific to the Win32 console version of Privoxy:
-#
-# hide-console
-#
-# If this option is used, Privoxy will disconnect from and hide
-# the command console.
-#
-#Win32-only: #hide-console
-
-
-# Note: Privoxy is distributed under the GNU General Public License (GPL)
-# For details, see http://www.gnu.org/copyleft/gpl.html