1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.182 2009/09/26 17:12:19 fabiankeil Exp $
5 # Written by and Copyright (C) 2001 - 2008 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
48 #############################################################################
49 # "make install" directories and variables
50 #############################################################################
56 datarootdir = @datarootdir@
58 exec_prefix = @exec_prefix@
59 CONF_BASE = @sysconfdir@
62 MAN_DEST = $(MAN_DIR)/man1
63 SHARE_DEST = @datadir@
64 DOC_DEST = $(SHARE_DEST)/doc/privoxy
65 VAR_DEST = @localstatedir@
66 LOGS_DEST = $(VAR_DEST)/log/privoxy
67 PIDS_DEST = $(VAR_DEST)/run
69 # if $prefix = /usr/local then the default CONFDEST change from
70 # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
71 # by the target rule CONF_DEST
73 # also if the $prefix is /usr/local and there is no
74 # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
75 # instead in this situation
77 # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
78 # changes this to /var for storing the logs and pidfile
80 # used in source dir only, the install goes to $share_dest/doc/privoxy
81 DOK_WEB = doc/webserver/
83 # Install usage should be compatible with install-sh.
87 # Support files, docs, etc.
91 # Files daemon writes to.
93 INSTALL_P = -m $(BIN_MODE)
94 INSTALL_T = -m $(RA_MODE)
95 INSTALL_D = -m $(DIR_MODE) -d
96 INSTALL_R = -m $(RWD_MODE)
98 # install options for superuser install
99 #INSTALL_S = -g @GROUP@ -o @USER@
101 #############################################################################
103 #############################################################################
105 PROGRAM = privoxy@EXEEXT@
110 # id -u is not universal. FIXME: need to set from configure. Breaks on
118 MKDIR = ./mkinstalldirs
132 WDUMP = @WDUMP@ -dump
135 DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
137 MAN2HTML = @MAN2HTML@
138 G2H_CMD = groff -mandoc -Thtml
142 DOC_TMP = $(DOC_DIR)/tmp
143 DOC_STATUS = @DOC_STATUS@
145 # Program to do LF->CRLF
147 # The sed version should be the most portable, but it doesn't for for me,
148 # the other two do. FIXME.
150 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
151 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
152 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
153 CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
154 #TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
156 #############################################################################
157 # Setup for make distribution for now.
158 #############################################################################
160 TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
162 #############################################################################
163 # We include these files in our distributions
164 #############################################################################
165 CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
166 # take care that no CVS .cvsignore or other crappy files
168 # and escape every '#' in the find. doh.
169 CONFIG_FILES = $(CONFIGS) \
170 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
172 DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
173 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
174 `find doc/webserver/ -name "*.css"` \
177 #############################################################################
178 # Filenames and libraries
179 #############################################################################
181 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
182 errlog.c filters.c gateway.c jbsockets.c jcc.c \
183 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
186 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
187 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
189 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
190 W32_FILES = @WIN_ONLY@w32.res
191 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
192 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
193 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
194 W32_INIS = @WIN_ONLY@config.txt trust.txt
196 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
197 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
198 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
200 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
201 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
202 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
204 # No REGEX (maybe because dynamically linked pcreposix):
206 @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
208 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
209 REGEX_HDRS = $(REGEX_SRC:.c=.h)
211 # Dependencies introduced by #include "project.h".
212 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
214 # Socket libraries for platforms that need them explicitly defined
215 SOCKET_LIB = @SOCKET_LIB@
217 # PThreads library, if needed.
218 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
220 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
221 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
222 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
223 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
226 #############################################################################
228 #############################################################################
230 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
231 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
233 # The flag "-pthread" is required if using Pthreads under Linux (and
234 # possibly other OSs).
235 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
237 # Add your flags here
240 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
241 @STATIC_PCRE_ONLY@ -Ipcre
243 LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
246 #############################################################################
249 # There should NOT be any targets above this line.
250 #############################################################################
251 all: $(PROGRAM) default.action
254 #############################################################################
256 #############################################################################
257 .PHONY: all inifiles solaris-dist \
258 win-dist tarball-dist dok webserver clean clobber tags \
259 install CONF_DEST LOG_DEST \
260 PID_DEST check_doc install-strip uninstall GROUP_T
262 #############################################################################
263 # Define this explicitly because Solaris is broken!
264 #############################################################################
266 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
269 #############################################################################
270 # Strip master copy comments from default.action:
271 #############################################################################
272 default.action: default.action.master
273 $(GREP) -v '^#MASTER#' $< > $@
275 #############################################################################
277 #############################################################################
279 inifiles: $(W32_INIS)
282 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
283 -e 's!\logfile logfile!logfile privoxy.log!' \
284 -e 's!#Win32-only: !!' \
287 # LF to CRLF in default.action
288 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
289 # LF to CRLF in default.filter
290 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
293 $(DOSFILTER) < $< > $@
295 #############################################################################
297 #############################################################################
299 @if [ -d CVS ]; then \
300 $(ECHO) "***************************************************"; \
302 $(ECHO) "*** WARNING ***"; \
304 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
305 $(ECHO) "*** that you are trying to build a distribution ***"; \
306 $(ECHO) "*** package based on a checked out, not an ***"; \
307 $(ECHO) "*** exported copy of the source tree. Please ***"; \
308 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
309 $(ECHO) "*** developer manual. ***"; \
311 $(ECHO) "***************************************************"; \
312 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
313 $(ECHO) -n "really want to proceed: "; \
315 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
319 #############################################################################
320 # create tar.gz from CVS:
321 # This make-target is usually called through 'create-archive'. If you
322 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
323 # tar.gz with the current date in the name and as a releasenumber in the
324 # spec-file. But the main usage is to run it as follows (Red Hat example):
325 # make SNAPVERSION=1.6x create-snapshot
326 # This creates a tar.gz.
327 #############################################################################
329 @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
330 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
331 echo "*** Creating package from $$tag!"; \
332 TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
333 cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
334 cd $$TMPDIR/current; \
335 $(TAR) --exclude ".cvsignore" --exclude "CVS" \
336 -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
338 @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
341 #############################################################################
342 # looks at the version of Makefile and exports a corresponding source-tree
343 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
344 # privoxy-*-2.4.13.tar.gz.
345 #############################################################################
347 make SNAPVERSION=$(SNAPVERSION) create-snapshot
349 #############################################################################
350 # generic distribution
351 #############################################################################
354 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
357 $(STRIP_PROG) $(PROGRAM)
358 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
360 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
362 for foo in $(CONFIG_FILES); do \
363 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
366 for foo in $(DOC_FILES); do \
367 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
369 # and zip the archive
370 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
371 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
372 @$(ECHO) Distribution with binary created.
374 # anonymously ncftps the package to sourceforge
376 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
377 @$(ECHO) -------------------------------------------------------
379 @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
380 @$(ECHO) ... and release the files.
381 @$(ECHO) -------------------------------------------------------
385 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
387 #############################################################################
388 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
389 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
390 #############################################################################
392 tarball-dist: dist-check clean clobber
393 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
395 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
396 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
397 -name "PACKAGERS" \)`; do \
398 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
400 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
402 # and zip the archive
403 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
404 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
405 @$(ECHO) Tarball distribution created.
407 # anonymously ncftps the tarball to sourceforge
409 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
410 @$(ECHO) -------------------------------------------------------
412 @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
413 @$(ECHO) ... and release the files.
414 @$(ECHO) -------------------------------------------------------
417 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
419 #############################################################################
423 # converts doc/source/*.sgml into html and man pages
425 #############################################################################
429 $(RM) doc/webserver/developer-manual/*.html
430 $(RM) -r doc/source/developer-manual
431 mkdir -p doc/source/developer-manual
432 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
436 $(RM) doc/webserver/user-manual/*.html
437 $(RM) -r doc/source/user-manual/
438 mkdir -p doc/source/user-manual
439 cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
440 # FIXME: temp fix so same stylesheet gets in more than one place so it works
441 # for all doc set-ups, including the 'user manual' config option in local
442 # system where it MUST be in same directory as html.
443 $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
447 $(RM) doc/webserver/faq/*.html
448 $(RM) -r doc/source/faq
449 mkdir -p doc/source/faq
450 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
452 # man page, one variation. Try to use the next target, just 'make man'.
454 $(RM) doc/man/* doc/webserver/man-page/*.html
455 ifneq ($(MAN2HTML),false)
456 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
457 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
458 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
463 # Build man page from sgml. This requires the SGMLSpm perl module.
464 # See CPAN, or your favorite perl repository. This is the preferred
465 # target for man page generation!
467 mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
468 nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
469 perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
470 perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
471 perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
472 perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
473 perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
474 perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
475 $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
477 # For those with man2html ala RH7s.
479 mkdir -p doc/webserver/man-page
480 ifneq ($(MAN2HTML),false)
481 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
482 $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
483 $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
484 # Twice because my version of man2html is pulling in commas and periods in URLs.
485 $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
486 $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
487 $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
488 # Get rid of spurious
\a from conversion. (How to do this with perl?)
489 $(SED) -e 's/
\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
495 # Otherwise we get plain groff conversion.
497 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
500 # readme page and INSTALL file
501 dok-readme: dok-release
502 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
503 env -u LANG $(WDUMP) tmp.html > ../../README ;\
504 $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
505 env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
508 # index.sgml is used to create both the Home Page, and a local index
509 # for documentation, etc.
511 # index.html for webserver:
513 cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
514 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
515 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
516 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
519 doc/webserver/index.html && $(RM) doc/webserver/*.bak
521 # privoxy-index.html for local documentation:
523 cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
524 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
525 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
526 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
529 doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
531 # Main documentation target.
532 dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
533 @$(ECHO) Documentation created.
537 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
538 tmp.html > ../../AUTHORS && $(RM) tmp.html
540 # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
541 # exceptions accordingly. This needs to go before any doc building (doh).
543 @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
544 @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
545 s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
546 doc/source/*sgml doc/source/*/*sgml
547 $(RM) -r doc/source/*bak doc/source/*/*bak
548 ifeq ($(CODE_STATUS),stable)
549 @$(ECHO) Setting docs to stable $(VERSION)
550 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
551 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
552 doc/source/*sgml doc/source/*/*sgml
553 $(RM) -r doc/source/*bak doc/source/*/*bak
555 @$(ECHO) Setting docs to not stable $(VERSION)
556 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
557 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
558 doc/source/*sgml doc/source/*/*sgml
559 $(RM) -r doc/source/*bak doc/source/*/*bak
562 # Create release announcement in text and html, with short and long versions.
563 # This is a standalone target, and must be invoked directly.
564 # announce: dok-release
565 # mkdir -p $(DOC_TMP)
566 # cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
567 # mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
568 # cd $(DOC_TMP) && $(DB) announce.sgml &&\
569 # mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
570 # mv -f *html *txt ../../..
573 # The main Privoxy config file, generated from sgml sources.
574 # NOTE: This will require some hand editing. The new file is outputted
575 # as config.new so that problem sections can be compared to previous
576 # version. This is hardcored to w3m for html/text conversion. Also,
577 # requires the shell util 'fmt'.
578 config-file: dok-release
579 cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
580 env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
581 $(PERL) -i.bak utils/prepare-configfile.pl config.new
584 @$(ECHO) "****************************************************"
585 @$(ECHO) "The output file is config.new."
586 @$(ECHO) "Now -- you need to hand edit the results!!!"
587 @$(ECHO) "In particular, check the Debug levels, the"
588 @$(ECHO) "permit-access, forward & socks examples and the"
589 @$(ECHO) "various user-manual examples, which all"
590 @$(ECHO) "probably got hammered."
591 @$(ECHO) "****************************************************"
593 # config file, alternate version using lynx (perl stuff unfinished). Lynx
594 # does not do so good a job.
596 cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
597 $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
598 lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
599 $(PERL) -pi -e 's/^( )//;\
600 s/:$\/:\n/' config.new
602 #############################################################################
606 # moves dokumentation to webserver
608 #############################################################################
610 @$(ECHO) -------------------------------------------------------
611 @$(ECHO) You will need to "create" a SF shell first:
612 @$(ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create
613 @$(ECHO) Please make sure your documentation files are up to date.
614 @$(ECHO) Note that this command updates the home page and scps
615 @$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
616 @$(ECHO) You will also need to change the user-manual symlink manually.
617 @$(ECHO) -------------------------------------------------------
619 @$(ECHO) Uploading html
621 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
622 $(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
624 @$(ECHO) Fixing permissions
625 @ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
626 @ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
627 @ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
632 @cd doc/webserver/actions; \
633 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
634 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
636 @$(ECHO) Fixing permissions
637 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
638 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
642 tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
643 --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
644 doc/* INSTALL LICENSE AUTHORS README \
646 $(ECHO) "Uploading doc package ..." ;\
647 scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
648 @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
653 $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
654 $(TAR) -zxvf $(DOC_FILE)
657 #############################################################################
658 # Source file dependencies
659 #############################################################################
661 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
662 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
663 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
664 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
665 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
666 encode.@OBJEXT@: encode.c encode.h config.h
667 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
668 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
669 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
670 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
671 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
672 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
673 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
674 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
675 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
676 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
677 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
678 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
681 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
684 pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
687 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
688 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
689 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
690 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
691 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
693 # An auxiliary program makes the PCRE default character table source
695 pcre/chartables.c: pcre/dftables@EXEEXT@
696 pcre/dftables@EXEEXT@ >pcre/chartables.c
698 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
699 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
702 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
703 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
704 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
706 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
707 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
710 @AMIGAOS_ONLY@OBJS += amiga.o
711 @AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
712 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
713 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
714 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
716 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
718 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
721 $(PROGRAM): $(OBJS) $(W32_FILES)
722 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
725 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
726 `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
729 $(RM) `find . -name "*~"`
730 $(RM) `find . -name "#*#"` # Emacs backup files
731 $(RM) `find . -name ".\#*"`
734 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
735 privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
736 $(RM) -r autom4te.cache
739 # FIXME: What is all this?
741 $(RM) cscope.* *.pdb *.lib *.exp
745 tags: $(SRCS) $(HDRS)
746 etags $(SRCS) $(HDRS)
748 CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
749 $(ECHO) "$(CONF_BASE)/privoxy";\
751 $(ECHO) "$(CONF_BASE)";\
754 LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
755 $(ECHO) "/var/log/privoxy" ;\
757 $(ECHO) "$(LOGS_DEST)";\
760 PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
761 $(ECHO) "/var/run" ;\
763 $(ECHO) "$(PIDS_DEST)";\
766 check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
772 # If USER is specified but no GROUP, assume there is a GROUP of same name.
773 GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
780 $(MAKE) install STRIP=-s
782 # FIXME: Test USER and GROUP on Slack to make sure this works as
785 # FIXME: id handling needs help, probably via configure, since 'id -u' is not
786 # universally reliable (eg Solaris). Group handling could be better.
787 # Perhaps the whole user/group validation should be done here, and simplified.
788 PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
789 install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
790 @# Quick test for valid USER.
791 @if [ -n "$(USER)" ]; then \
792 $(ID) $(USER) >/dev/null || exit 1;\
794 @# Test for valid group. FIXME. USER does not have to belong to GROUP
795 @# for file ownership purposes.
796 # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
797 # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
800 @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
801 $(CHMOD) $(DIR_MODE) $(MKDIR)
802 @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
803 $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
804 $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
805 @# Install the executable binary, strip if invoked as install-strip
806 @test -n "$(STRIP)" &&\
807 $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
808 $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
809 $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
811 @# Install the DOCS and man page. install-sh only does one file at a time.
812 @# FIXME: only handles jpegs.
813 -@if [ $(check_doc) = 0 ]; then \
816 DOC=$(prefix)/doc/privoxy ;\
818 $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
819 $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
820 if [ -d "$(DOK_WEB)" ]; then \
821 $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
822 for i in user-manual developer-manual faq; do \
823 for ii in $(DOK_WEB)/$$i/*html; do \
824 $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
827 for i in $(DOK_WEB)/user-manual/*jpg; do \
828 $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
830 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
831 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
832 $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
833 $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
834 $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
835 $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
836 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
837 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
839 @# Not all platforms support gzipped man pages.
840 @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
841 -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
843 @# Change the config file default directories according to the configured ones
844 @$(ECHO) Rewriting config for this installation
845 @if [ -f config.base ] ; then \
846 $(CAT) config >config~ ;\
847 $(MV) config.base config ;\
849 $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
850 $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
851 -@if [ $(check_doc) = 0 ]; then \
852 $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
854 $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
856 $(MV) config config.base
857 $(MV) config.updated config
859 @# Install the config support files. Test for root install, and abort
860 @# if there is no privoxy user, and no other user was enabled during
861 @# configure. Later, install init script if appropriate.
862 @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
863 @for i in `find templates -type f`; do \
864 $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
867 @# FIXME: group/user validation is overly convoluted.
868 @# If superuser install ... we require a minimum of group ownership
869 @# of those files the daemon writes to, to be non-root owned.
870 @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
871 if [ x$(USER) = x ] || [ $(USER) = root ]; then \
872 if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
873 if [ "`$(ID) privoxy`" ] && \
874 $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
875 $(ECHO) "Warning: Setting group owner to privoxy";\
878 $(ECHO) "******************************************************************" ;\
879 $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
880 $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
881 $(ECHO) " and to install the config files as that user and/or group!" ;\
882 $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
883 $(ECHO) "*******************************************************************" ;\
889 INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
891 $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
892 INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
893 GROUP_T=$(GROUP_T) ;\
896 if [ ! "`id $(USER)`" = "`id`" ] ;then \
897 $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
898 $(ECHO) "Edit may fail." ;\
900 INSTALL_CONF="$(INSTALL_R)" ;\
902 $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
903 for i in $(CONFIGS); do \
904 if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
905 $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
906 $(ECHO) Installing fresh $$i;\
907 $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
908 elif [ -s "$(CONF_DEST)/$$i" ]; then \
909 $(ECHO) Installing $$i as $$i.new ;\
910 $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
913 $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
916 if [ -n "$$NEW" ]; then \
917 $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
918 $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
920 [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
921 $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
922 $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
923 if [ x$$USER != x ]; then \
924 $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
925 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
927 if [ x$$GROUP_T != x ]; then \
928 $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
929 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
931 $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
932 if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
933 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
934 $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
935 $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
936 $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
937 $(SED) 's+%USER%+$(USER)+' | \
938 $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
939 $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
940 $(ECHO) "Installing for Slackware." ;\
941 $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
942 elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
943 $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
944 $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
945 $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
948 $(ECHO) "No init script installed, install it manually if needed" ;\
950 $(RM) config.base config.tmp
952 @$(ECHO) "$(PROGRAM_V) installation succeeded!"
953 @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
955 # rmdir is used as a precaution since it will not remove non-empty
956 # directories. RH init script creates lock file and pid file.
957 uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
958 @$(ECHO) Starting Privoxy uninstallation
959 @# KILL privoxy if running
960 @# XXX: the chkconfig line may need a DESTDIR prefix.
961 -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
962 $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
963 -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
964 $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
967 @$(ECHO) Removing $(PROGRAM) binary
968 $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
970 @# config files and dir, and maybe old install backups
971 -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
972 $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
973 $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
974 cd $(DESTDIR)$(CONF_DEST) ;\
975 for i in $(DESTDIR)$(CONFIGS); do \
976 [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
979 @$(ECHO) Removing $(PROGRAM) config files
980 -@for i in $(DESTDIR)$(CONFIGS); do \
981 test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
982 $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
984 -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
985 $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
988 @$(ECHO) Removing $(PROGRAM) docs
989 -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
990 -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
993 @$(ECHO) Removing $(PROGRAM) logs
994 -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
996 @# Final clean up of unused directories. Special handling of CONF and LOG
998 @$(ECHO) Removing $(PROGRAM) directories
999 @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
1000 if test -d $$i; then \
1001 $(ECHO) Removing $$i ;\
1002 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1005 @if [ ! "$(prefix)" = "/usr/local" ] ;then \
1006 for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
1007 $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
1008 if test -d $$i; then \
1009 $(ECHO) Removing $$i ;\
1010 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1013 if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
1014 $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
1015 $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
1017 if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
1018 $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
1019 $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
1021 if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
1022 $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
1023 $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
1025 if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
1026 $(ECHO) Removing $(DESTDIR)$(prefix) ;\
1027 $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
1028 $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
1033 @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
1034 $(ECHO) Removing $(PROGRAM) init script ;\
1035 if [ -f $(DESTDIR)/etc/slackware-version ] && \
1036 [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
1037 $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
1038 elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
1039 $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
1041 $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
1044 @$(ECHO) Privoxy uninstalled, bye
1047 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
1048 -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
1049 -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
1050 -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
1051 -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
1052 -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
1053 -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
1055 #############################################################################
1061 # $Log: GNUmakefile.in,v $
1062 # Revision 1.182 2009/09/26 17:12:19 fabiankeil
1063 # Remove obsolete redhat, suse and connectiva targets.
1065 # Revision 1.181 2009/04/04 20:24:29 fabiankeil
1066 # Let the clean target play nice with git.
1068 # Revision 1.180 2009/02/28 08:28:14 fabiankeil
1069 # pcrs.o doesn't depend on pcre/pcre.h if we are linking
1070 # dynamically. Patch provided by drauh in #2056286.
1072 # Revision 1.179 2009/02/22 14:48:31 hal9
1073 # Updates to the 'make webserver' target that recreates the home page and uploads
1074 # fresh documents to reflect new SF realities, and more explanation of process.
1076 # Revision 1.178 2009/02/08 18:35:48 fabiankeil
1077 # Move the match-all section into a separate file
1078 # (match-all.action) so we can safely overwrite the
1079 # default actions when updating. Based on Roland's
1082 # Revision 1.177 2009/01/13 16:44:32 fabiankeil
1083 # Delete the standard.action file after moving
1084 # the pre-settings over to the default actions.
1086 # Revision 1.176 2008/09/21 13:24:37 fabiankeil
1087 # Add Roland's man page fixes from 19_manpage_fixup.dpatch.
1089 # Revision 1.175 2008/08/30 12:03:07 fabiankeil
1090 # Remove FEATURE_COOKIE_JAR.
1092 # Revision 1.174 2008/07/18 17:50:47 fabiankeil
1095 # Revision 1.173 2008/06/18 18:28:42 fabiankeil
1096 # Remove PDF-related stuff.
1098 # Revision 1.172 2008/06/17 16:16:08 fabiankeil
1099 # - Stop building text files nobody cares about.
1100 # - Update copyright year.
1102 # Revision 1.171 2008/06/13 15:24:57 fabiankeil
1103 # Move previously inline'd Perl code for the config-file target
1104 # into a separate file, have it work with older perl releases,
1105 # clean it up a bit and fix the "underlining" code.
1107 # Revision 1.170 2008/06/12 16:38:50 fabiankeil
1108 # Add third-level domain to URL in dok-get target.
1110 # Revision 1.169 2008/06/09 17:28:31 fabiankeil
1111 # - Recommend https for releasing files.
1112 # - Fix a warning about datarootdir being ignored.
1114 # Revision 1.168 2008/05/23 18:03:12 fabiankeil
1115 # - Shorten meta description inserted in dok-webserver
1116 # and dok-index target.
1117 # - In config-file target, unset LANG for w3m as we
1118 # might otherwise end up with multi-byte characters.
1120 # Revision 1.167 2008/05/23 14:39:09 fabiankeil
1121 # Silence dok-user complaint about @# not being found.
1123 # Revision 1.166 2008/05/23 14:04:57 fabiankeil
1124 # - Get config-file target working with more recent Perl
1125 # versions. The generated file is still messed up, though.
1126 # - Fix comment typo.
1128 # Revision 1.165 2008/05/22 16:57:23 fabiankeil
1129 # Fix coffee machine.
1131 # Revision 1.164 2008/05/22 10:26:26 fabiankeil
1132 # - Remove parsers.@OBJEXT@'s dependency on encode.h.
1133 # - Include Emacs backup files in tidy target again.
1135 # Revision 1.163 2008/05/04 18:01:53 fabiankeil
1136 # Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
1138 # Revision 1.162 2008/03/30 13:31:42 fabiankeil
1139 # Add DESTDIR support for the uninstall target.
1141 # Revision 1.161 2008/03/30 13:19:13 fabiankeil
1142 # Add DESTDIR support for the install target. Closes PR#1910612.
1143 # Patch by Radoslaw Zielinski with minor modifications.
1145 # Revision 1.160 2008/03/27 18:27:19 fabiankeil
1146 # Remove kill-popups action.
1148 # Revision 1.159 2008/03/21 11:13:53 fabiankeil
1149 # Only gather host information if it's actually needed.
1150 # Also move the code out of accept_connection() so it's less likely
1151 # to delay other incoming connections if the host is misconfigured.
1153 # Revision 1.158 2007/12/11 21:29:25 fabiankeil
1154 # Fix dependency list for cgiedit.c.
1156 # Revision 1.157 2007/12/10 02:28:02 hal9
1157 # Unset $LANG for text processing of docs so we get pure text.
1159 # Revision 1.156 2007/11/15 03:17:43 hal9
1160 # Some workaround changes to the config file perl stuff and comments, which is
1161 # broken here all by itself on perl 5.8.8.
1163 # Revision 1.155 2007/09/22 16:23:25 fabiankeil
1164 # Update copyright line.
1166 # Revision 1.154 2007/02/07 11:52:40 fabiankeil
1167 # Fix suse-dist as described in BR#1654052.
1168 # (I didn't test it, but it's done the same
1169 # way in redhat-dist which is known to work).
1171 # Revision 1.153 2007/01/07 07:36:36 joergs
1172 # Added AmigaOS4 support.
1174 # Revision 1.152 2006/12/13 14:53:51 etresoft
1175 # Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
1177 # Revision 1.151 2006/11/30 01:08:55 hal9
1178 # Fix problem with variable declarations in the Slackware section. Thanks to higuita.
1180 # Revision 1.150 2006/10/25 11:55:45 fabiankeil
1181 # Fix sed regexes for rewriting "confdir ." and "logdir .".
1182 # Thanks to Darel Henman for reporting this.
1184 # Revision 1.149 2006/10/11 01:40:28 hal9
1185 # Apply patch from Neil McCalden to fix syntax issue.
1187 # Revision 1.148 2006/09/26 10:57:58 hal9
1188 # Including Karsten's patch to fix make create-snapshot.
1190 # Revision 1.147 2006/09/13 01:25:16 hal9
1191 # Make sure install forces in new default.action, default.filter, and
1192 # standard.filter. These are privoxy files, not user files.
1194 # Revision 1.146 2006/09/08 23:57:19 hal9
1195 # User manual images are now user-manual doc directory, and fix make install
1196 # target accordingly.
1198 # Revision 1.145 2006/09/08 02:32:00 hal9
1199 # Various changes to implement building and installing docs to be compatible
1200 # with the new "user-manual" settings in config from Roland. Docbook does not
1201 # seem to like dealing with more than one css file, so workaround that here.
1202 # Change 'make install' so it provides p_doc.css in the user-manual doc
1203 # directory so that functions well, and lastly modify 'make install' so that the
1204 # PATH is automatically set, and the 'user-manual' directive should done during
1207 # Revision 1.144 2006/09/07 22:53:20 hal9
1208 # Make sure config sgml build related artifacts are cleaned out.
1210 # Revision 1.143 2006/09/02 15:59:40 hal9
1211 # Add to code status to make install output.
1213 # Revision 1.142 2006/08/29 01:46:24 hal9
1214 # Add user.filter to $CONFIGS.
1216 # Revision 1.141 2006/08/12 03:54:37 david__schmidt
1217 # Windows service integration
1219 # Revision 1.140 2006/07/18 14:48:45 david__schmidt
1220 # Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
1221 # with what was really the latest development (the v_3_0_branch branch)
1223 # Revision 1.104.2.28 2004/06/10 17:06:05 hal9
1224 # Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
1225 # only place it is used.
1227 # Revision 1.104.2.27 2004/02/07 16:11:10 oes
1228 # Make clobber remove the autom4te.cache dir.
1231 # Revision 1.104.2.26 2004/01/31 16:32:25 oes
1232 # Adding a check for an htmldoc variant from the debian diff
1234 # Revision 1.104.2.25 2004/01/31 01:15:33 oes
1235 # Fixed a typo; updated copyright notice
1237 # Revision 1.104.2.24 2003/12/03 10:30:02 oes
1238 # - Added new dependency: actions.c -> ssplit.h
1239 # - Excluded PDF docs from src tarball
1241 # Revision 1.104.2.23 2003/04/20 17:28:52 hal9
1242 # Strip trailing spaces from config-file generation, bug #724596.
1244 # Revision 1.104.2.22 2003/03/28 03:32:01 hal9
1245 # Minor changes for Privoxy home page:
1246 # - Handle © more sanely
1247 # - include link to announce.txt
1248 # Also, disable 'make announce' target.
1250 # Revision 1.104.2.21 2002/11/04 07:04:03 hal9
1251 # Catch up with main trunk install/uninstall. Quiet output, etc.
1253 # Revision 1.104.2.20 2002/10/25 02:44:22 hal9
1254 # Port of make install, etc from main trunk. Needs testing! Add Slackware
1255 # support, and other related changes. Update related docs.
1257 # Revision 1.104.2.19 2002/09/26 22:50:02 hal9
1258 # New user-manual examples in config-file are getting wrapped. Add warning.
1260 # Revision 1.104.2.18 2002/08/23 12:22:40 oes
1261 # Added warning to broken install target
1263 # Revision 1.104.2.17 2002/08/16 03:19:34 hal9
1264 # More (minor) cleanup of html before pdf processing to make some relative
1265 # links work as pdf -> pdf. Upload pdf as zip archive now.
1267 # Revision 1.104.2.16 2002/08/14 16:43:27 hal9
1268 # Added pdf docs to make webserver target.
1270 # Revision 1.104.2.15 2002/08/11 20:02:41 hal9
1271 # New targets for man page (make man) and pdf (make dok-pdf) targets.
1273 # Revision 1.104.2.14 2002/08/10 11:19:37 oes
1274 # - Make -Ipcre (again) conditional on STATIC_PCRE
1275 # - $(RPMBUILD) -> $(RPM) for SuSE
1276 # - Add dependency: pcrs.o deps on config.h
1278 # Revision 1.104.2.13 2002/08/07 15:13:54 hal9
1279 # Remove pdf2 target, and make it dok-shtml (single page html for pdf
1282 # Revision 1.104.2.12 2002/08/06 11:29:36 oes
1283 # Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
1285 # Revision 1.104.2.11 2002/07/30 19:38:11 hal9
1286 # Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
1287 # *I think* it was supposed to be (was breaking upload targets since it was
1288 # set to RPM_VERSION).
1290 # Revision 1.104.2.10 2002/07/27 22:56:53 kick_
1291 # cleanups of the redhat-srpm target
1293 # Revision 1.104.2.9 2002/07/26 15:17:02 oes
1294 # - Added generation of default.action from defaul.action.master
1295 # - Deleted obsolete re_filterfile.txt generation
1297 # Revision 1.104.2.8 2002/07/12 10:04:32 kick_
1298 # added helper targets to the makefile. They shouldn't break anything, but
1299 # make my life a lot easier.
1301 # The new rpm has been splitted into two parts, one for package installation/
1302 # removal, one for package building.
1303 # Therefore rpm -ta isn't a valid command anymore and needs to be replaced
1304 # by rpmbuild -ta (this is backwards compatible)
1306 # Revision 1.104.2.7 2002/06/07 00:23:47 hal9
1307 # Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
1308 # thus breaking them completely.
1310 # Revision 1.104.2.6 2002/06/02 03:26:25 hal9
1311 # Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
1312 # index.html and team/index.html)
1314 # Revision 1.104.2.5 2002/05/30 15:35:01 hal9
1315 # This is more cleanup on the make config-file target. Most issues for
1316 # automatic generation are taken care of. There are still some problems
1317 # that require hand editing. Namely, some of the examples that are > 80 chars.
1319 # Revision 1.104.2.4 2002/05/29 02:12:17 hal9
1320 # Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
1321 # new target is 'make config-file', _not_ make config.
1323 # Revision 1.104.2.3 2002/05/29 02:05:48 hal9
1324 # 'make config' target added (WIP) for future generation of config file from
1325 # text in u-m so the two are in sync. New generated config, which requires
1326 # some hand editing for the time being.
1328 # Revision 1.104.2.2 2002/05/28 02:32:55 hal9
1329 # New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
1330 # not being cleaned up in doc/webserver.
1332 # Revision 1.104.2.1 2002/05/26 17:19:34 hal9
1333 # Remove Table of Contents from readme with oes's dsl trick.
1335 # Revision 1.104 2002/05/24 00:03:49 oes
1336 # Use p_doc.css for the Homepage for consistency
1338 # Revision 1.103 2002/05/23 23:19:00 oes
1339 # Use dsl without TOC for the homepage
1341 # Revision 1.102 2002/05/16 01:20:17 hal9
1342 # make announce target added.
1344 # Revision 1.101 2002/05/15 12:28:46 oes
1345 # Trying to keep Hal happy :)
1347 # Revision 1.100 2002/05/08 13:48:18 hal9
1348 # Ooops, that trashed JB v2.0.2 comment. Fixed.
1350 # Revision 1.99 2002/05/08 13:42:07 hal9
1351 # This fixes the numbering problem on index.html in contact info section (.1.). Using
1352 # perl, since its way too convoluted to try to fix proper with docbook.
1354 # Revision 1.98 2002/05/03 14:33:06 oes
1355 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
1357 # Revision 1.97 2002/04/27 20:27:43 swa
1358 # no longer needed due to new
1359 # PACKAGE_VERSION process
1361 # Revision 1.96 2002/04/27 17:44:32 morcego
1362 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
1363 # - Using the RM macro everywhere rm is called (either we use, or don't)
1366 # Revision 1.95 2002/04/27 15:37:25 swa
1367 # replacing directory in document creation process
1368 # no longer necessary.
1370 # Revision 1.94 2002/04/27 08:23:29 swa
1371 # pdf process reviewed and cleaned up
1373 # Revision 1.93 2002/04/27 04:55:53 morcego
1374 # privoxy-cl.spec now gets removed by clobber target
1376 # Revision 1.92 2002/04/27 04:53:40 morcego
1377 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
1380 # Revision 1.91 2002/04/27 04:44:51 morcego
1381 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
1382 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
1383 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
1385 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
1386 # for Conectiva Linux
1388 # Revision 1.90 2002/04/26 17:46:53 swa
1391 # Revision 1.89 2002/04/26 17:20:54 swa
1392 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1394 # Revision 1.88 2002/04/25 19:13:57 morcego
1395 # Removed RPM release number declaration on configure.in
1396 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1397 # targets (will produce an error, explaining who to do it, if no value
1400 # Revision 1.87 2002/04/23 14:10:59 swa
1401 # now create pdf documents
1403 # Revision 1.86 2002/04/15 04:30:27 hal9
1404 # Missed two -pi.bak's on perl/cygwin problem.
1406 # Revision 1.85 2002/04/14 01:05:34 hal9
1407 # Revert dok-webserver change for SF logo.
1409 # Revision 1.84 2002/04/13 22:43:25 hal9
1410 # -Fix dok-webserver for SF logo (more perl).
1411 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1413 # Revision 1.83 2002/04/12 09:39:25 oes
1414 # Excluding yet more files from tarball; making dist warning yet more scary
1416 # Revision 1.82 2002/04/11 21:07:11 oes
1417 # Excluding more files from tarball build
1419 # Revision 1.81 2002/04/11 14:40:27 oes
1420 # Fixed typo -- Thanks, Moritz!
1422 # Revision 1.80 2002/04/11 12:50:00 oes
1423 # Fixed tarball-dist target
1425 # Revision 1.79 2002/04/11 06:49:28 oes
1426 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1428 # Revision 1.78 2002/04/09 13:37:11 sarantis
1429 # fix tar options typo
1431 # Revision 1.77 2002/04/09 13:28:53 swa
1432 # build suse and gen-dist with html docs
1434 # Revision 1.76 2002/04/08 22:43:41 oes
1435 # Fix: Include dotfiles in fixing webserver permissions
1437 # Revision 1.75 2002/04/08 22:14:59 oes
1438 # Silencing tar warnings in the web* targets
1440 # Revision 1.74 2002/04/08 15:22:44 hal9
1441 # This has finishing touches for dok building. Should be ready to go.
1442 # -The main doc build is now 'make dok', should work on Redhat too.
1443 # -Removed man page from main doc build. It is built separately due to
1444 # perl scripts that most aren't likely to have.
1446 # Revision 1.73 2002/04/08 14:03:24 oes
1447 # oes for al: Fix install target
1449 # Revision 1.72 2002/04/08 13:42:11 oes
1450 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1452 # Revision 1.71 2002/04/07 20:32:03 hal9
1453 # -Add meta data kludge for make dok-webserver via $(PERL).
1454 # -Add subdirs for 'make dok-release'.
1456 # Revision 1.70 2002/04/07 08:59:40 swa
1457 # generated files. do NOT edit.
1458 # fixed directory bug in makefile.
1460 # Revision 1.69 2002/04/07 08:10:47 swa
1461 # create some of the webserver docs
1462 # automatically (in particular if
1463 # those docs recycle other documentation
1464 # fragments). Now committed webserver's
1467 # Revision 1.68 2002/04/07 07:58:11 swa
1468 # create some of the webserver docs
1469 # automatically (in particular if
1470 # those docs recycle other documentation
1473 # Revision 1.67 2002/04/07 05:31:42 hal9
1474 # Add 'dok-release' target:
1475 # -Set doc entities to VERSION and CODE_STATUS during make.
1476 # -Set doc conditional content flags (stable vs non-stable).
1477 # A separate target for the time being but needs to be incorporated into
1478 # dok build at some point.
1479 # -Filter out a spurious ^G from new man page > html converion in man2html.
1481 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1482 # Prettifying groff2html.
1483 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1484 # (The shell "if"s were hiding errors)
1485 # "perl" -> "$(PERL)"
1486 # Spaces->tabs in a couple of places.
1488 # Revision 1.65 2002/04/06 05:16:39 hal9
1489 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1490 # -Both of these will soon be generated files.
1492 # Revision 1.64 2002/04/04 22:14:51 oes
1493 # No longer rely on find honoring -iname
1495 # Revision 1.63 2002/04/04 21:06:22 swa
1498 # Revision 1.62 2002/04/04 20:49:50 swa
1499 # attempt to consolidate the
1500 # different dokbook versions.
1502 # Revision 1.61 2002/04/04 19:18:21 swa
1503 # readme was leftover directory. use w3m instead
1504 # of lynx to be consistent among developers. use
1505 # consistent target naming.
1507 # Revision 1.60 2002/04/04 12:25:41 oes
1508 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1510 # Revision 1.59 2002/04/04 08:32:45 swa
1511 # wrong name for tarball-dist target. further fixed content of tarball dist
1513 # Revision 1.58 2002/04/04 06:32:58 hal9
1514 # New dok targets for make readme.
1516 # Revision 1.57 2002/04/04 00:36:36 gliptak
1517 # always use pcre for matching
1519 # Revision 1.56 2002/04/03 22:28:03 gliptak
1520 # Removed references to gnu_regex
1522 # Revision 1.55 2002/04/03 19:54:29 swa
1523 # freebsd tested to work. attempt to move tarball dist target forward
1525 # Revision 1.54 2002/04/03 14:54:07 oes
1526 # Standard clean and clobber semantics II
1528 # Revision 1.53 2002/04/03 14:19:16 oes
1529 # Standard clean and clobber semantics
1531 # Revision 1.52 2002/04/03 02:56:18 hal9
1532 # Revert previous FAQ numbering kludge.
1534 # Revision 1.51 2002/04/02 13:03:56 oes
1535 # Added fix for webserver permissions
1537 # Revision 1.50 2002/04/02 03:46:24 hal9
1538 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1539 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1541 # Revision 1.49 2002/03/30 22:20:12 swa
1542 # cd didn't work. neither did find.
1544 # Revision 1.48 2002/03/30 19:04:06 swa
1545 # people release differently. no good.
1546 # I want to make parts of the docs only.
1548 # Revision 1.47 2002/03/30 09:05:21 swa
1549 # better packaging. better rpm building.
1550 # tar failed on sun (no exclude there).
1552 # Revision 1.46 2002/03/29 20:09:01 swa
1555 # Revision 1.45 2002/03/29 19:45:45 swa
1558 # Revision 1.44 2002/03/29 17:42:44 gliptak
1559 # Correcting for Solaris tar limitations
1561 # Revision 1.43 2002/03/29 07:40:03 swa
1562 # fixed make webserver. doh
1564 # Revision 1.42 2002/03/29 06:59:04 swa
1565 # other users could not modify files on webserver
1567 # Revision 1.41 2002/03/28 20:43:00 swa
1568 # set make correctly
1570 # Revision 1.40 2002/03/28 04:22:44 hal9
1571 # More on man2html stuff.
1573 # Revision 1.39 2002/03/28 01:04:14 hal9
1574 # More man2html stuff for docs.
1576 # Revision 1.38 2002/03/27 16:02:30 swa
1577 # have a generic target
1579 # Revision 1.37 2002/03/27 15:30:26 swa
1580 # have a consistent appearance
1582 # Revision 1.36 2002/03/27 14:58:08 swa
1583 # can be used by mutilple targets
1585 # Revision 1.35 2002/03/27 14:53:19 swa
1586 # added solaris-dist
1588 # Revision 1.34 2002/03/27 10:30:11 swa
1589 # we want a html man file on the webserver
1591 # Revision 1.33 2002/03/27 03:05:35 hal9
1592 # Added man2html target for docs (redhat-dok only for now)
1594 # Revision 1.32 2002/03/26 22:29:54 swa
1595 # we have a new homepage!
1597 # Revision 1.31 2002/03/26 14:00:18 swa
1598 # fixed make tarball, tarball-dist, tarball-clean
1600 # Revision 1.30 2002/03/25 12:52:25 swa
1603 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1606 # Revision 1.28 2002/03/24 16:19:48 swa
1607 # configure needs to be generated.
1609 # Revision 1.27 2002/03/24 16:13:57 swa
1610 # generated files are a nono in cvs
1612 # Revision 1.26 2002/03/24 15:36:02 swa
1615 # Revision 1.25 2002/03/24 14:31:08 swa
1616 # remove more crappy files. set RPM
1617 # release version correctly.
1619 # Revision 1.24 2002/03/24 14:19:55 swa
1620 # set rpm package release in configure.in. nowhere else.
1622 # Revision 1.23 2002/03/24 13:06:49 swa
1623 # suse-clean now runs fine
1625 # Revision 1.22 2002/03/24 12:56:21 swa
1626 # name change related issues.
1628 # Revision 1.21 2002/03/24 12:43:57 swa
1631 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1632 # Renaming config files
1634 # Revision 1.19 2002/03/22 20:53:03 morcego
1635 # - Ongoing process to change name to JunkbusterNG
1636 # - configure/configure.in: no change needed
1638 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1639 # - PROGRAM = jbng@EXEEXT@
1640 # - rh-spec now references as junkbusterng-rh.spec
1641 # - redhat-upload: references changed to junkbusterng-* (package names)
1642 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1643 # - tarball-src: now JunkbusterNG-*
1644 # - install: initscript now junkbusterng.init and junkbusterng (when
1646 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1647 # - junkbusterng.spec:
1648 # - References to the expression ijb where changed where possible
1649 # - New package name: junkbusterng (all in lower case, acording to
1650 # the LSB recomendation)
1651 # - Version changed to: 2.9.13
1653 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1654 # right. If it obsoletes, why conflict ? Have to check it later)
1655 # - Summary changed: Stefan, please check and aprove it
1656 # - Changes description to use the new name
1657 # - Sed string was NOT changed. Have to wait to the manpage to
1659 # - Keeping the user junkbuster for now. It will require some aditional
1660 # changes on the script (scheduled for the next specfile release)
1661 # - Added post entry to move the old logfile to the new log directory
1662 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1663 # added to the startup list).
1664 # - Added preun section to stop the service with the old name, as well
1665 # as remove it from the startup list
1666 # - Removed the chkconfig --del entry from the conditional block on
1667 # the preun scriptlet (now handled on the %files section)
1668 # - junkbuster.init: renamed to junkbusterng.init
1669 # - junkbusterng.init:
1670 # - Changed JB_BIN to jbng
1671 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1672 # be used where necessary (config dir)
1675 # - The config directory is /etc/junkbuster yet. Have to change it on the
1676 # specfile, after it is changes on the code
1677 # - The only files that got renamed on the cvs tree were the rh specfile and
1678 # the init file. Some file references got changes on the makefile and on the
1679 # rh-spec (as listed above)
1681 # Revision 1.18 2002/03/21 23:00:00 swa
1682 # want to autogenerate stuff.
1684 # Revision 1.17 2002/03/19 19:30:04 morcego
1685 # - Fixing stylesheet checking on configure. If it is found, no further checks
1688 # - configure will now check for db2html or docbook2html (should work now
1689 # on SuSe without the docbktls package)
1691 # Revision 1.16 2002/03/14 22:32:32 hal9
1692 # Bumped the RPM version.
1694 # Revision 1.15 2002/03/08 20:00:28 swa
1697 # Revision 1.14 2002/03/07 18:25:56 swa
1698 # synced redhat and suse build process
1700 # Revision 1.13 2002/03/07 17:17:56 oes
1701 # (Hopefully) fixed for older make versions
1703 # Revision 1.12 2002/03/07 15:28:27 swa
1706 # Revision 1.11 2002/03/06 14:33:18 sarantis
1707 # Use proper temp file, not "abc".
1709 # Revision 1.10 2002/03/06 14:19:35 sarantis
1710 # Cleanup PID_FILE_PATH from redhat-dist target
1712 # Revision 1.9 2002/03/05 17:31:11 morcego
1713 # Search for docbook.dsl. Should solve portability problems for SuSe.
1715 # Revision 1.8 2002/03/05 14:07:42 morcego
1716 # configure now detects rpm topdir, and change GNUmakefile acordingly
1717 # (based on sugestion by Sarantis Paskalis)
1719 # Revision 1.7 2002/03/05 13:43:28 morcego
1720 # Checking for text browser, so redhat-dok can work.
1722 # Revision 1.6 2002/03/05 13:10:51 morcego
1723 # Changes to implement redhat-dok (Hal Burgiss)
1724 # Changes to make it work on other distros and out-of-the-shelf configurations
1726 # Revision 1.5 2002/02/27 15:30:39 hal9
1727 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1729 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1730 # Adding urlmatch.[ch]
1732 # Revision 1.3 2002/01/04 15:26:08 oes
1733 # Added tarball-src target
1735 # Revision 1.2 2001/12/30 14:07:31 steudten
1736 # - Add signal handling (unix)
1737 # - Add SIGHUP handler (unix)
1738 # - Add creation of pidfile (unix)
1739 # - Add action 'top' in rc file (RH)
1740 # - Add entry 'SIGNALS' to manpage
1741 # - Add exit message to logfile (unix)
1743 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1744 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1745 # make break in a more obvious way.
1746 # Adding .PHONY section.
1748 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1749 # Renaming various config files
1750 # Fixing CR->CRLF under Win32 (I hope)
1752 # Revision 1.39 2001/11/06 12:07:30 steudten
1753 # Add --clean for building rpm in target redhat-dist.
1755 # Revision 1.38 2001/11/05 21:35:23 steudten
1756 # Complete rewrite for the 'redhat-dist' target.
1757 # Checks for writeable RPM build directories for calling user.
1758 # So you must not be root, just set the modes to 1777 to
1759 # build a RH package.
1760 # Fix the upload-target to be arch independant.
1761 # Add target for 'solaris-dist' - coming soon.
1763 # Revision 1.37 2001/11/01 00:52:04 hal9
1764 # Redhat-upload stuff per Stefan.
1766 # Revision 1.36 2001/10/31 19:26:13 swa
1767 # automate process of uploading new releases
1770 # Revision 1.35 2001/10/15 22:14:59 joergs
1771 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1772 # the general CFLAGS already.
1774 # Revision 1.34 2001/10/15 18:28:06 steudten
1775 # remove config.cache for target clobber.
1776 # Cleanup make dist for RH and S.u.S.E.
1778 # Revision 1.33 2001/10/10 12:43:33 oes
1779 # Added ugly hack to make install target work at least for some setups.
1781 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1782 # Correcting actionsfile filename for Win32 INI build
1784 # Revision 1.31 2001/09/23 10:13:48 swa
1785 # upload process established. run make webserver and
1786 # the documentation is moved to the webserver. documents
1787 # are now linked correctly.
1789 # Revision 1.30 2001/09/19 17:55:49 oes
1792 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1793 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1794 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1795 # of build problems.
1797 # Revision 1.28 2001/09/13 15:19:08 swa
1798 # we want text files as well.
1800 # Revision 1.27 2001/09/13 13:11:37 steudten
1802 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1804 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1805 # Mac OSX (Darwin) support added.
1807 # Revision 1.25 2001/09/12 22:55:45 joergs
1808 # AmigaOS support added.
1810 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1812 # OS/2 port: update autoconf'd support for the platform.
1814 # Revision 1.23 2001/09/12 16:28:42 swa
1815 # added "make dok" section to generate html pages from
1816 # the sgml source documents. note that the we do not want
1817 # generated stuff in cvs.
1819 # Revision 1.22 2001/09/10 16:31:23 swa
1820 # buildroot definition in the specfile fucks up the build
1821 # process under suse. hence I moved it to the "rpm -ta"
1824 # Revision 1.21 2001/09/10 11:12:49 oes
1827 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1828 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1830 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1831 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1833 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1834 # Major changes to build system in order to fix these bugs:
1835 # - pthreads under Linux was broken - changed -lpthread to -pthread
1836 # - Compiling in MinGW32 mode under CygWin now correctly detects
1837 # which shared libraries are available
1838 # - Solaris support (?) (Not tested under Solaris yet)
1840 # Revision 1.17 2001/07/28 16:44:54 oes
1841 # Fixed sed LF->CRLF conversion and removed deprecated files
1843 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1844 # Added support for linking with POSIX threads library
1846 # Revision 1.15 2001/07/13 13:48:07 oes
1847 # - Moved STATIC #define for pcre to (ac)config.h
1848 # - Made -Ipcre depandant on static pcre compilation to
1849 # avoid version conflicts
1850 # - Included compilation and depandancies for new deanimate.c
1851 # - Made changes to the pcre/pcreposix/pcrs build process
1852 # as required by the new library autodetection in
1855 # Revision 1.14 2001/07/01 16:27:44 oes
1856 # Fixed misplaced dependancy
1858 # Revision 1.13 2001/06/29 13:18:36 oes
1859 # - added depandancy of filters.o on cgi.h
1861 # Revision 1.12 2001/06/12 17:15:56 swa
1862 # fixes, because a clean build on rh6.1 was impossible.
1863 # GZIP confuses make, %configure confuses rpm, etc.
1865 # Revision 1.11 2001/06/11 11:26:35 sarantis
1866 # RPM version should be the same as ijbswa version. The rpm release is
1867 # specified in the specfile.
1869 # Revision 1.10 2001/06/07 17:27:45 swa
1870 # added suse build section
1872 # Revision 1.9 2001/06/04 18:31:58 swa
1873 # files are now prefixed with either `confdir' or `logdir'.
1874 # `make redhat-dist' replaces both entries confdir and logdir
1875 # with redhat values
1877 # Revision 1.8 2001/06/04 10:44:57 swa
1878 # `make redhatr-dist' now works. Except for the paths
1879 # in the config file.
1881 # Revision 1.7 2001/06/03 17:09:09 swa
1882 # swa for oes: reversed my earlier change
1884 # Revision 1.6 2001/06/03 17:07:27 swa
1887 # Revision 1.5 2001/06/03 13:57:26 swa
1888 # compile cgi.c (for andreas' GUI)
1890 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1891 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1893 # Revision 1.3 2001/05/29 20:02:48 joergs
1894 # Changes for AmigaOS added.
1896 # Revision 1.2 2001/05/17 22:23:23 oes
1897 # - Added auto-generation of CRLFs for Win32 config files
1898 # - Added comment-prefix to all Win32-only options in the config file
1899 # and provided auto stripping of this prefix for the Win32 platform by make
1901 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1902 # Initial import of version 2.9.3 source tree