# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.125 2002/10/15 05:53:34 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.126 2002/10/16 05:38:00 hal9 Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
#############################################################################
# We include these files in our distributions
#############################################################################
+CONFIGS = config trust default.action standard.action user.action default.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
-CONFIG_FILES = config trust \
- default.action \
- standard.action user.action \
- default.filter \
+CONFIG_FILES = $(CONFIGS) \
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
-DOC_FILES = AUTHORS LICENSE README ChangeLog \
+DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
`find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
$(ECHO) "$(GROUP)";\
fi)
-install-strip:
- $(MAKE) INSTALL_P='$(INSTALL_P) -s' install
+install-strip:
+ $(MAKE) install STRIP=-s
# FIXME: id handling needs help, probably via configure, since 'id -u' is not
# universally reliable (eg Solaris). Group handling is weak. If group is null,
# tests for the first group outputted from groups command. Perhaps the whole
# user/group validation should be done here. hal.
install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ # Quick test for valid USER.
+ if [ -n "$(USER)" ]; then \
+ id $(USER) >/dev/null || exit 1;\
+ fi
$(ECHO) "Creating directories, and preparing Privoxy installation"
$(CHMOD) 0755 $(MKDIR)
$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
- $(MAN_DEST) $(LOG_DEST) $(PID_DEST)
-
- # Install the executable binary
+ $(LOG_DEST) $(PID_DEST)
+ # Install the executable binary, strip if invoked as install-strip
+ test -n "$(STRIP)" &&\
+ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
$(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
- $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
-
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
+
# Install the DOCS and man page
-if [ $(check_doc) = 0 ]; then \
DOC=$(DOC_DEST) ;\
DOC=$(prefix)/doc/privoxy ;\
fi;\
$(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
- $$DOC/man-page $$DOC/images ;\
+ $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
if [ -d "$(DOK_WEB)" ]; then \
$(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
for i in user-manual developer-manual faq; do \
$(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
fi
- $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1.gz
- -$(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
+ $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
# Change the config file default directories according to the configured ones
- $(ECHO) Rewriting config
+ $(ECHO) Rewriting config for this installation
if [ -f config.base ] ; then \
$(CAT) config >config~ ;\
$(MV) config.base config ;\
# configure.
$(ECHO) Installing templates to $(CONF_DEST)/templates
for i in `find templates -type f`; do \
- $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
- done
+ $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
+ done
if [ "`id |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
if [ x$(USER) = x ]; then \
if [ "`id privoxy`" ]; then \
fi ;\
INSTALL_CONF="$(INSTALL_T)" ;\
fi ;\
- $(ECHO) Installing config files to $(CONF_DEST);\
- for i in config default.action default.filter standard.action; do \
- if [ -s "$(CONF_DEST)/$$i" ] ; then \
- $(INSTALL) $(CONF_DEST)/$$i $(CONF_DEST)/$$i.save ;\
- fi ;\
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) ;\
- done ;\
- if [ ! -s "$(CONF_DEST)/user.action" ] ; then \
- $(INSTALL) $$INSTALL_CONF user.action $(CONF_DEST) ;\
- fi ;\
- if [ ! -s "$(CONF_DEST)/trust" ] ; then \
- $(INSTALL) $$INSTALL_CONF trust $(CONF_DEST) ;\
- fi ;\
+ $(ECHO) Installing configuration files to $(CONF_DEST);\
+ for i in $(CONFIGS); do \
+ if [ -s "$(CONF_DEST)/$$i" ] ; then \
+ $(ECHO) Installing $$i as $$i.new ;\
+ $(INSTALL) $$i $(CONF_DEST)/$$i.new || exit 1;\
+ NEW=1;\
+ else \
+ $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ fi ;\
+ done ;\
+ if [ -n "$$NEW" ]; then \
+ $(CHMOD) 0640 $(CONF_DEST)/*.new || exit 1 ;\
+ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
+ fi
# Set up the logfiles, mode 0640 for privacy reasons
- $(ECHO) Creating logfiles in $(LOG_DEST)
- $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
+ ! test -f $(LOG_DEST)/logfile && $(ECHO) Creating logfiles in $(LOG_DEST) ||\
+ $(ECHO) Checking logfiles in $(LOG_DEST)
+ $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1
if [ x$(USER) != x ]; then \
$(CHOWN) $(USER):$(GROUP_T) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
- $(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
+ $(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1
# Install the init and logrotate scripts. Test for Slackware and Red Hat only.
# Install if dest is writable and its a system install. Hardcode 755 mode
$(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
$(SED) 's+%USER%+$(USER)+' | \
$(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
- $(INSTALL) -m 755 slackware/rc.privoxy /etc/rc.d/ ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
$(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
- $(INSTALL) -m 755 privoxy.init /etc/rc.d/init.d/privoxy ;\
- $(MKDIR) /etc/logrotate.d/ ;\
- $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
- $(INSTALL) -m 755 privoxy.logrotate /etc/logrotate.d/privoxy ;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
- $(INSTALL) -m 755 privoxy-generic.init /etc/init.d/privoxy ;\
- fi ;\
- else \
- $(ECHO) "No init script installed, install it manually if needed" ;\
- fi
+ $(INSTALL) $(INSTALL_P) privoxy.init /etc/rc.d/init.d/privoxy ;\
+ $(MKDIR) /etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
+ $(INSTALL) $(INSTALL_P) privoxy.logrotate /etc/logrotate.d/privoxy ;\
+ elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
+ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
+ fi ;\
+ else \
+ $(ECHO) "No init script installed, install it manually if needed" ;\
+ fi
# mmmmm, good.
@$(ECHO) "Privoxy installation succeeded!"
@$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
+# rmdir is used as a precaution since it will not remove non-empty
+# directories.
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
$(ECHO) Starting Privoxy uninstallation
# KILL privoxy if running
$(ECHO) Removing $(PROGRAM) binary
$(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
- # config files and dir and maybe old install backups
+ # config files and dir, and maybe old install backups
$(ECHO) Removing $(PROGRAM) config files
- $(RM) $(CONF_DEST)/config $(CONF_DEST)/default.action $(CONF_DEST)/default.filter \
- $(CONF_DEST)/trust $(CONF_DEST)/standard.action $(CONF_DEST)/user.action \
- $(CONF_DEST)/config~ $(CONF_DEST)/default.action~ $(CONF_DEST)/default.filter~ \
- $(CONF_DEST)/trust~ $(CONF_DEST)/standard.action~ $(CONF_DEST)/user.action~ \
- $(CONF_DEST)/config.save $(CONF_DEST)/default.action.save \
- $(CONF_DEST)/default.filter.save $(CONF_DEST)/standard.action.save
+ for i in $(CONFIGS); do \
+ $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
+ done
$(RM) -r $(CONF_DEST)/templates
# man page and docs
$(ECHO) Removing $(PROGRAM) docs
- -$(RM) $(MAN_DEST)/privoxy.1.gz
+ -$(RM) $(MAN_DEST)/privoxy.1*
-$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
# Log and jarfile and pidfile
# destinations.
$(ECHO) Removing $(PROGRAM) directories
for i in $(LOG_DEST) $(CONF_DEST); do \
- if test -d $$i; then \
- $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
- fi;\
- done
+ if test -d $$i; then \
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done
if [ ! "$(prefix)" = "/usr/local" ] ;then \
- for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
- if test -d $$i; then \
- $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
- fi;\
- done;\
- if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
- $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
- fi ;\
- if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
- $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
- fi ;\
- if test -d $(prefix)/var && test -d $(prefix)/var; then \
- $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
- fi ;\
- if test -d $(prefix); then \
- $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
- fi;\
+ for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
+ if test -d $$i; then \
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done;\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
+ $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
+ $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test $(prefix)/var != /var && test -d $(prefix)/var; then \
+ $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
+ $(ECHO) Removing installation directory $(prefix) ;\
+ $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
+ fi;\
fi
# init scripts and logrotate
if [ "$(prefix)" = "/usr/local" ]; then \
- $(ECHO) Removing $(PROGRAM) init script ;\
- if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
- $(RM) /etc/rc.d/rc.privoxy ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(RM) /etc/init.d/privoxy ;\
- else \
- $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
- fi ;\
+ $(ECHO) Removing $(PROGRAM) init script ;\
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(RM) /etc/rc.d/rc.privoxy ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
+ elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
+ $(RM) /etc/init.d/privoxy ;\
+ else \
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
+ fi ;\
fi
$(ECHO) Privoxy uninstalled, bye
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.126 2002/10/16 05:38:00 hal9
+# More make install/uninstall updates:
+# -Make compatible with install-sh with does not support -b flag, and can only
+# handle one file at a time (sigh).
+# -Manually save existing config files, if they exist.
+# -Fix install-strip so does not try to strip init scripts.
+#
# Revision 1.125 2002/10/15 05:53:34 hal9
# A few more cleanups:
# -use mkinstalldirs consistently.