- Announcing Privoxy v.3.0.15 beta
------------------------------------------------------------------
+ Announcing Privoxy 3.0.31 stable
+--------------------------------------------------------------------
-Privoxy 3.0.15 beta is a bugfix-release for the previous betas
-which introduced IPv6 support, improved keep-alive support and
-a bunch of minor improvements.
+Privoxy 3.0.31 fixes two security issues that were discovered while
+preparing the 3.0.30 release. The issues also affect earlier Privoxy
+releases.
-See http://www.privoxy.org/3.0.14/user-manual/whatsnew.html for details.
+--------------------------------------------------------------------
+ChangeLog for Privoxy 3.0.31
+--------------------------------------------------------------------
+- Security/Reliability:
+ - Prevent an assertion from getting triggered by a crafted CGI request.
+ Commit 5bba5b89193fa. OVE-20210130-0001.
+ Reported by: Joshua Rogers (Opera)
+ - Fixed a memory leak when decompression fails "unexpectedly".
+ Commit f431d61740cc0. OVE-20210128-0001.
+
+- Bug fixes:
+ - Fixed detection of insufficient data for decompression.
+ Previously Privoxy could try to decompress a partly
+ uninitialized buffer.
--------------------------------------------------------------------
-ChangeLog for Privoxy
+ChangeLog for Privoxy 3.0.30
--------------------------------------------------------------------
-*** Version 3.0.15 beta ***
-
-- In case of missing server data, no error message is send to the
- client if the request arrived on a reused connection. The client
- is then supposed to silently retry the request without bothering
- the user. This should significantly reduce the frequency of the
- "No server or forwarder data received" error message many users
- reported.
-- More reliable detection of prematurely closed client sockets
- with keep-alive enabled.
-- FEATURE_CONNECTION_KEEP_ALIVE is decoupled from
- FEATURE_CONNECTION_SHARING and now available on
- all platforms.
-- Improved handling of POST requests on reused connections.
- Should fix problems with stalled connections after submitting
- form data with some browser configurations.
-- Fixed various latency calculation issues.
-- Allows the client to pass NTLM authentication requests to a
- forwarding proxy. This was already assumed and hinted to work
- in 3.0.13 beta but actually didn't. Now it's confirmed to work
- with IE, Firefox and Chrome.
- Thanks to Francois Botha and Wan-Teh Chang
-- Fixed a calculation problem if receiving the server headers
- takes more than two reads, that could cause Privoxy to terminate
- the connection prematurely. Reported by Oliver.
-- Compiles again on platforms such as OpenBSD and systems
- using earlier glibc version that don't support AI_ADDRCONFIG.
- Anonymously submitted in #2872591.
-- A bunch of MS VC project files and Suse and Redhat RPM spec
- files have been removed as they were no longer maintained for
- quite some time.
-- Overly long action lines are properly rejected with a proper
- error message. Previously they would be either rejected as
- invalid or cause a core dump through abort().
-- Already timed-out connections are no longer temporarily remembered.
- They weren't reused anyway, but wasted a socket slot.
-- len refers to the number of bytes actually read which might
- differ from the ones received. Adjust log messages accordingly.
-- The optional JavaScript on the CGI page uses encodeURIComponent()
- instead of escape() which doesn't encode all characters that matter.
- Anonymously reported in #2832722.
-- Fix gcc45 warnings in decompress_iob().
-- Various log message improvements.
-- Privoxy-Regression-Test supports redirect tests.
-- Privoxy-Log-Parser can gather some connection statistics.
-
-*** Version 3.0.14 beta ***
-
-- The latency is taken into account when evaluating whether or not to
- reuse a connection. This should significantly reduce the number of
- connections problems several users reported.
-- If the server doesn't specify how long the connection stays alive,
- Privoxy errs on the safe side of caution and assumes it's only a second.
-- The error pages for connection timeouts or missing server data use a
- Last-Modified date in the past. Retry attempts are detected and Privoxy
- removes the If-Modified-Since header to prevent the server from responding
- with status code 304 in which case the client would reuse the error message.
-- Setting keep-alive-timeout to 0 disables keep-alive support. Previously
- Privoxy would claim to allow persistence but not reuse the connection.
-- Pipelined requests are less likely to be mistaken for the request
- body of the previous request. Note that Privoxy still has no real
- pipeline support and will either serialize pipelined requests or
- drop them in which case the client has to resent them.
-- Fixed a crash on some Windows versions when header randomization
- is enabled and the date couldn't be parsed.
-- Privoxy's keep-alive timeout for the current connection is reduced
- to the one specified in the client's Keep-Alive header.
-- For HTTP/1.1 requests, Privoxy implies keep-alive support by not
- setting any Connection header instead of using 'Connection: keep-alive'.
-- If the socket isn't reusable, Privoxy doesn't temporarily waste
- a socket slot to remember the connection.
-- If keep-alive support is disabled but compiled in, the client's
- Keep-Alive header is removed.
-- Fixed a bug on mingw32 where downloading large files failed if
- keep-alive support was enabled.
-- Fixed a bug that (at least theoretically) could cause log
- timestamps to be occasionally off by about a second.
-- No Proxy-Connection header if added if there already is one.
-- The configure script respects the $PATH variable when searching
- for groups and id.
-
-*** Version 3.0.13 beta ***
-
-- Added IPv6 support. Thanks to Petr Pisar who not only provided
- the initial patch but also helped a lot with the integration.
-- Added client-side keep-alive support.
-- The connection sharing code is only used if the connection-sharing
- option is enabled.
-- The max-client-connections option has been added to restrict
- the number of client connections below a value enforced by
- the operating system.
-- Fixed a regression reintroduced in 3.0.12 that could cause
- crashes on mingw32 if header date randomization was enabled.
-- Compressed content with extra fields couldn't be decompressed
- and would get passed to the client unfiltered. This problem
- has only be detected through statical analysis with clang as
- nobody seems to be using extra fields anyway.
-- If the server resets the Connection after sending only the headers
- Privoxy forwards what it got to the client. Previously Privoxy
- would deliver an error message instead.
-- Error messages in case of connection timeouts use the right
- HTTP status code.
-- If spawning a child to handle a request fails, the client
- gets an error message and Privoxy continues to listen for
- new requests right away.
-- The error messages in case of server-connection timeouts or
- prematurely closed server connections are now template-based.
-- If zlib support isn't compiled in, Privoxy no longer tries to
- filter compressed content unless explicitly asked to do so.
-- In case of connections that are denied based on ACL directives,
- the memory used for the client IP is no longer leaked.
-- Fixed another small memory leak if the client request times out
- while waiting for client headers other than the request line.
-- The client socket is kept open until the server socket has
- been marked as unused. This should increase the chances that
- the still-open connection will be reused for the client's next
- request to the same destination. Note that this only matters
- if connection-sharing is enabled.
-- A TODO list has been added to the source tarballs to give potential
- volunteers a better idea of what the current goals are.
+
+- Bug fixes:
+ - Check the actual URL for redirects when https inspecting requests.
+ Previously Privoxy would only check the path which resulted in
+ rewrite results being rejected as invalid URLs.
+ Reported by withoutname in #1736.
+ - Let the hide-referrer code tolerate Referer headers with https:// URLs.
+ Previously they would always be treated like a changed host.
+ - Use the https headers if the show-request handler is reached through
+ https://. Previously Privoxy would use the http headers which
+ may be empty on a reused connection.
+ - Make CGI_PREFIX protocol-relative when building with FEATURE_HTTPS_INSPECTION.
+ This unbreaks (at least) https://config.privoxy.org/client-tags whose
+ buttons would previously use a http:// URL resulting in browser warnings.
+ - Support using https-inspection and client-header-order at the same time.
+ Previously Privoxy would crash.
+ Reported by: Kai Raven
+ - Properly reject rewrites from http to https as they currently
+ aren't supported. Previously Privoxy would wait for the client
+ to establish an encrypted connection which obviously would not happen.
+ - When https inspection is enabled and Privoxy has been compiled with
+ FEATURE_GRACEFUL_TERMINATION (not recommended for production builds),
+ the TLS backend resources are free'd later on and only if no active
+ connections are left. Prevents crashes when exiting "gracefully" at the
+ wrong time.
+ - Let the uninstall target remove the config file even if DESTDIR
+ is set and properly announce the deletion of the configuration files.
+
+- General improvements:
+ - Allow to rewrite the request destination for https-inspected
+ requests behind the client's back. The documentation already sort
+ of claimed that it was supported by not especially mentioning that
+ it didn't work for https-inspected requests.
+ Fixes SF bug #923 reported by withoutname.
+ - Add support for filtering client request bodies by using
+ CLIENT-BODY-FILTER filters which can be enabled with the
+ client-body-filter action.
+ Patch submitted by Maxim Antonov.
+ Sponsored by: Robert Klemme
+ - Add the new action suppress-tag{} which can be used to prevent
+ a tagger from adding a tag. Patch submitted by Maxim Antonov.
+ Sponsored by: Robert Klemme
+ - Gracefully handle existing website keys without matching certificates.
+ This can happen if Privoxy was previously running with an invalid
+ TLS configuration that didn't allow it to create a certificate.
+ - Recycle debug bit 4 for Tagging-related messages.
+ - Improve the message shown when the client-tags CGI page
+ is requested with no tags configured.
+ - Shorten the 'donate' and 'participate' links used by templates
+ using redirects. Currently the redirects lead to the FAQ entries
+ but in the future we may want to relocate the content and using
+ redirects makes this more convenient.
+ - Log an error when a PCRE-HOST-PATTERN is used with
+ FEATURE_PCRE_HOST_PATTERNS disabled. Don't treat this a
+ fatal error so the regression tests can be used with and
+ without FEATURE_PCRE_HOST_PATTERNS.
+ - The code compiles with older C compilers again.
+ - The chdir() return code is checked to fix a compiler warning.
+ - The packages feed has been removed from the source tarball.
+ It's usually out of date when the source tarball is generated
+ for the release.
+ - Fixed harmless compiler warnings from GCC9 with -D_FORTIFY_SOURCE=2.
+ - windows: Remove obsolete '$(DEST)/doc/images' target.
+ - windows: Install the images referenced in the user manual.
+ - Remove obsolete 'gnu_regex.@OBJEXT@' target.
+ - When installing from the GNUMAkefile, don't create an 'images'
+ directory which is no longer used. The images were relocated to
+ the user-manual directory years ago.
+ - Add new FEATURES to the show-status page and resort list.
+ - Remove unused variable in the OpenSSL-specific code.
+ - Update bug tracker URL in cgi_error_unknown().
+ - Saved a couple of memory allocations when sorting client headers.
+ - Improved a couple of error messages.
+ - Saved memory allocations when using OpenSSL and checking if a
+ key already exists.
+ - The configure script will bail out if OpenSSL and mbedTLS are
+ enabled at the same time.
+ - Log a message right before exiting gracefully.
+ - A couple of structures have been rearranged to require slightly
+ less memory.
+ - When https inspection is enabled and the certificate is invalid
+ the error message is now sent with status code 403 instead of 200.
+ - The Slackware rc script template has been renamed to
+ slackware/rc.privoxy.in to silence complaints when building
+ Debian packages.
+ - When building with MbedTLS support, mbedtls_md5_ret() is used
+ instead of mbedtls_md5() which is deprecated and causes a warning
+ on Debian GNU/Linux.
+
+- Action file improvements:
+ - Block requests to eu-tlp03.kameleoon.com/.
+ - Unblock metrics.sr.ht/.
+ - Disable fast-redirects for .fsf.org/.
+ - Disable fast-redirects for .gravater.com/.
+ - Disable fast-redirects for .ksta.de/.
+ - Block requests to tag.crsspxl.com/.
+ - Block requests to analytics.slashdotmedia.com/.
+ - Block requests to ml314.com/.
+ - Block requests to .adroll.com/.
+ - Block requests to fastlane.rubiconproject.com/.
+ - Block requests to api.theadex.com/.
+ - Block requests to ih.adscale.de/.
+ - Block requests to .s400.meetrics.net/.
+ - Block requests for pp.lp4.io/.
+ - Block requests for trc-events.taboola.com/.
+
+- Filter file improvements:
+ - A allow-autocompletion filter has been added which changes
+ autocomplete="off" to "on" on input fields to allow autocompletion.
+ Requested by Jamie Zawinski in #370.
+ Filter based on a submission by Aaron Linville.
+ - Added an imdb filter.
+ - Added a sourceforge filter that reduces the amount of ads
+ for proprietary software.
+ - Added a github filter that removes the annoying "Sign-Up"
+ banner and the Cookie disclaimer.
+ - Removed a duplicated pcrs command from the js-annoyances filter.
+ - The crude-parental filter now provides a short reason when blocking,
+ inserts a link to Privoxy's webinterface and adds a new line at
+ the end of the generated page.
+
+- Privoxy-Log-Parser:
+ - Highlight a few more messages.
+ - Add a handler for tagging messages.
+ - Properly deal with 'Certificate error' crunches
+ Previously the error description was highlighted as 'host'.
+ - Log truncated LOG_LEVEL_CLF messages more gracefully
+ and note that the statistics will be imprecise.
+ - Fixed perldoc typo.
+ - Bump version to 0.9.2.
+
+- Privoxy-Regression-Test:
+ - Use http://127.0.0.1:8118/ as default Privoxy address
+ unless http_proxy is set through the environment.
+ - Add a --privoxy-cgi-prefix option that specifies the prefix
+ to use when building URLs that are supposed to reach Privoxy's
+ CGI interface. If it's not set, http://p.p/ is used, which is
+ supposed to work with the default Privoxy configuration.
+ If Privoxy has been built with FEATURE_HTTPS_INSPECTION enabled,
+ and if https inspection is activated with the +https-inspection
+ action, this option can be used with "https://p.p/" provided the
+ system running Privoxy-Regression-Test has been configured to
+ trust the certificate used by Privoxy.
+ Note that there are currently two tests in the official
+ regression-tests.action file that are expected to fail
+ when using "https://p.p/" as privoxy-cgi-prefix.
+ - Skip the connection-established response in get_status_code()
+ when looking for the status code with a CGI prefix
+ that starts with https://. We care about the status code
+ sent by the impersonated web server.
+ - Use --proxy-header when using a CGI prefix with https://
+ and a "Host:" header.
+ - Allow '|' in tokens and values to allow tag patterns like
+ "TAG:^(application|text)/(x-)?javascript$".
+ - When get_cgi_page_or_else() fails, include the URL of the
+ requested page in the log message.
+ - Added a --check-bad-ssl option that can be used to verify that
+ Privoxy detects certificate problems when accessing the test
+ sites from badssl.com.
+ - Bumped version to 0.7.2
+
+- uagen:
+ - Update example output.
+ - Recommend the use of the https-inspection action in the documentation.
+ - Upgrade a couple of URLs to https://.
+ - Add ElectroBSD to the list of operating systems.
+ - Bumped generated Firefox version to 78 (ESR).
+ - Bumped version to 1.2.2.
+
+ - User documentation:
+ - Remove reference to 'How to Report Bugs Effectively'.
+ It was only rendered as text without URL in the README anyway
+ and there's no indication that users read it ...
+ - Let the dok-readme target fix the location embedded into the
+ README file. This used to be done by CVS but since the git migration
+ it has to be done through other means.
+ - Remove 'experimental' warning for client-specific-tag-related directives.
+ They seem to work reliably and there is no obvious reason
+ why we would change the syntax in the near future.
+ - Describe how to check if Privoxy has been built with
+ FEATURE_HTTPS_INSPECTION.
+ - Add a link to the trusted-cas-file documentation
+ that explains how the user can create the file herself.
+ - Don't explicitly mention the license for the code coming from
+ 'Anonymous Coders' and Junkbusters. It's obviously licensed under
+ the GNU GPL like the rest of Privoxy or we wouldn't be allowed to
+ distribute it.
+ - Update the +hide-user-agent example with uagen output.
+ - Slightly improve the wording of the ca-key-file documentation.
+ - Explicitly mention Windows 10 as supported so search engines and
+ users looking for it can find it.
+ - Import a bunch of contributors from the ChangeLog.
+ - Remove obsolete doc/gpl.html.
+ - Upgrade a couple of links to https://.
+ - Don't prefer the SourceForge patch tracker over the
+ privoxy-devel mailing list. While at it, link to the
+ SourceForge patch tracker.
+ - Mention http-inspection in the 'my browser warns me about
+ unauthenticated content' FAQ entry.
+ - Simplify the 'Is there is a license or fee?' FAQ entry.
+ - Add another +redirect{} example.
+ - Explicitly mention that interested sponsors should include
+ the link target in their first mail.
+ - Clarify that only Privoxy team members can object to new sponsors
+ and link to the list of current team members.
+ - Note that sponsor URLs may not contain keyword spam.
+ - Garbage collect doc/webserver/images which isn't referenced anymore.
+ - Update the method to reach the proxy settings in Firefox.
+ - Update proxy_setup.jpg description to refer to Firefox.
+ - Regenerate proxy_setup.jpg with a more recent Firefox (78.0).
+ - Regenerate files-in-use.jpg without obsolete standard.action
+ with modern colors and a slightly better quality.
+ - Update URL to the actionsfile tracker.
+ - Update a support request URL.
+ - Rephrase the 'Can Privoxy run as service' FAQ entry and
+ remove an obsolete paragraph.
+ - Let the 'Where can I get updated Actions Files?' entry link to
+ the gitweb version of default.action.master.
+ - Update a link to the default.action file.
+ - Update URLs for trackers and mailing lists.
+ - Replace CVS reference with git.
+ - Mention regression-tests.action in the config file.
+ - Explicitly mention in the config file that access to the
+ CA key should be limited to Privoxy.
+ - List more client-specific-tag examples for inspiration.
+ - Add additional headers to the client-header-order example.
+ - Note that actions aren't updated after rewrites.
+ - Explicitly mention that upgrading from http to https with
+ a client-header filter is not supported
+ - Note that protocol and host have to be added when rewriting
+ the destination host for https-inspected requests.
+ - Explicitly mention that the CA key is used to sign certificates.
+ - Put openssl command in 'command' tags.
+ - The man page has been moved from section 1 to man section 8.
+
+- Developer manual:
+ - Flesh out the build instructions for Debian.
+ - Remove the packaging instructions for RPM-based systems.
+ They don't work and we don't release RPM packages anymore anyway.
+ - Remove the packaging instructions for Solaris.
+ They don't work and we don't release Solaris packages anymore anyway.
+ - Update the suggested subject for the announce mails.
+ - Update upload instructions.
+ ftp://upload.sourceforge.net is no longer functional.
+ - Remove a couple of package-dependent upload instructions
+ that don't actually work.
+ - Remove 'cd current' that no longer works.
+ - Add regression-tests.action to the list of files that should be installed.
+ - Stop claiming that there are text versions of the manuals.
+ We stopped building them in 2008 (9ed36a3c5e6f12).
+ - Note that the 'webserver' target creates the link needed for the user-manual.
+ - Suggest to use the master branch as reference when creating
+ the ChangeLog so the steps work when the current branch differs
+ from master which is likely as the developer manual
+ suggests to use a local branch for development.
+ - Add the -s flag to the suggested 'git tag' command. We prefer signed tags.
+ - Mention that merges into 'master' should be avoided.
+ - Add git commands that should result in a merge-free history.
+ - Mention Privoxy-Regression-Test.
+ - Add a section id to reduce link churn.
+ - Recommend the dok-tidy target when building docs for the webserver.
+ - Add another plug for the privoxy-devel mailing list.
+ - Let the intro link the copyright section in the user manual instead
+ of giving an incomplete summary of the license status.
+ - Clarify that the webserver target uploads to the SourceForge webserver.
+ - Mark the documentation for the Mac OS X installers as out of date and
+ change the SCM name back to CVS.
+ - Fix the location of the installer modules for Mac OS X.
+ They are not actually available through git (yet).
+ - Don't speak of Privoxy version 3 in the past tense.
+ - Update the list of programs required for the release process.
+ - Update description of the webserver target which uses ssh, not scp.
+ - Remove obsolete reference to config.new.
+
+- Tests:
+ - Add another hide-referrer{conditional-block} test.
+ - Add another hide-referrer{conditional-forge} test.
+ - Fix a hide-referrer{conditional-forge} test
+ that expected an acceptable header to be forged.
+ - Fix a hide-referrer{conditional-block} test
+ that expected an acceptable Referer to be removed.
+ - Explain why the "Set Header = Host: whatever.example.org" test is
+ expected to fail when using a CGI prefix that starts with "https://".
+ - Explain why a connection-sharing test is known to fail
+ when using "https://p.p/" as CGI prefix.
+ - Add a link to Privoxy-Regression-Test to regression-tests.action
+ in case it isn't packaged.
+ - Add regression tests for pcre host patterns.
+ - Fixed a regression test that is executed when
+ FEATURE_GRACEFUL_TERMINATION is enabled.
+
+- Privoxy infrastructure:
+ - Import a Privoxy logo for the website.
+ - Update Tor onion service to HiddenServiceVersion 3.
+ - Display the "model" photos in a single row and remove placeholder images.
+ - Regenerate homepage with updated sponsor list.
+ - Use the '/sponsor' redirect for the link to the sponsor page.
+ - Git commit messages are sent to the Privoxy-commits mailing list.
-----------------------------------------------------------------
About Privoxy:
tastes. It has application for both stand-alone systems and multi-user
networks.
-Privoxy is Free Software and licensed under the GPL2.
+Privoxy is Free Software and licensed under the GNU GPLv2.
-Privoxy is an associated project of Software in the Public Interest (SPI).
-Donations are welcome: http://www.privoxy.org/faq/general.html#DONATE
+Our TODO list is rather long. Helping hands and donations are welcome:
-At present, Privoxy is known to run on Windows(95, 98, ME, 2000,
-XP, Vista), Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and
-others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and
-various other flavors of Unix.
+ * https://www.privoxy.org/participate
+
+ * https://www.privoxy.org/donate
+
+At present, Privoxy is known to run on Windows 95 and later versions
+(98, ME, 2000, XP, Vista, Windows 7, Windows 10 etc.), GNU/Linux
+(RedHat, SuSE, Debian, Fedora, Gentoo, Slackware and others),
+Mac OS X (10.4 and upwards on PPC and Intel processors), Haiku,
+DragonFly, ElectroBSD, FreeBSD, NetBSD, OpenBSD, Solaris,
+and various other flavors of Unix.
In addition to the core features of ad blocking and cookie management,
Privoxy provides many supplemental features, that give the end-user
more control, more privacy and more freedom:
+ * Supports "Connection: keep-alive". Outgoing connections can be kept
+ alive independently from the client. Currently not available on all
+ platforms.
- * Supports "Connection: keep-alive". Outgoing connections can be kept
- alive independently from the client. Currently not available on all
- platforms.
+ * Supports IPv6, provided the operating system does so too,
+ and the configure script detects it.
- * Supports IPv6, provided the operating system does so too,
- and the configure script detects it.
+ * Supports tagging which allows to change the behaviour based on client
+ and server headers.
- * Supports tagging which allows to change the behaviour based on client
- and server headers.
+ * Supports https inspection which allows to filter https requests.
- * Can be run as an "intercepting" proxy, which obviates the need to
- configure browsers individually.
+ * Can be run as an "intercepting" proxy, which obviates the need to
+ configure browsers individually.
- * Sophisticated actions and filters for manipulating both server and
- client headers.
+ * Sophisticated actions and filters for manipulating both server and
+ client headers.
- * Can be chained with other proxies.
+ * Can be chained with other proxies.
- * Integrated browser based configuration and control utility at
- http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
- tracing of rule and filter effects. Remote toggling.
+ * Integrated browser based configuration and control utility at
+ http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
+ tracing of rule and filter effects. Remote toggling.
- * Web page filtering (text replacements, removes banners based on size,
- invisible <quote>web-bugs</quote> and HTML annoyances, etc.)
+ * Web page filtering (text replacements, removes banners based on size,
+ invisible "web-bugs" and HTML annoyances, etc.)
- * Modularized configuration that allows for standard settings and user
- settings to reside in separate files, so that installing updated actions
- files won't overwrite individual user settings.
+ * Modularized configuration that allows for standard settings and user
+ settings to reside in separate files, so that installing updated actions
+ files won't overwrite individual user settings.
- * Support for Perl Compatible Regular Expressions in the configuration
- files, and a more sophisticated and flexible configuration syntax.
+ * Support for Perl Compatible Regular Expressions in the configuration
+ files, and a more sophisticated and flexible configuration syntax.
- * GIF de-animation.
+ * GIF de-animation.
- * Bypass many click-tracking scripts (avoids script redirection).
+ * Bypass many click-tracking scripts (avoids script redirection).
- * User-customizable HTML templates for most proxy-generated pages (e.g.
- "blocked" page).
+ * User-customizable HTML templates for most proxy-generated pages (e.g.
+ "blocked" page).
- * Auto-detection and re-reading of config file changes.
-
- * Most features are controllable on a per-site or per-location basis.
+ * Auto-detection and re-reading of config file changes.
+ * Most features are controllable on a per-site or per-location basis.
-Download location:
- http://sourceforge.net/project/showfiles.php?group_id=11118
-
-Home Page:
- http://www.privoxy.org/
+Home Page:
+ https://www.privoxy.org/
- - Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+ - Privoxy Developers <privoxy-devel@lists.privoxy.org>