1 <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[
2 <!entity % dummy "IGNORE">
3 <!entity supported SYSTEM "supported.sgml">
4 <!entity newfeatures SYSTEM "newfeatures.sgml">
5 <!entity p-intro SYSTEM "privoxy.sgml">
6 <!entity history SYSTEM "history.sgml">
7 <!entity seealso SYSTEM "seealso.sgml">
8 <!entity contacting SYSTEM "contacting.sgml">
9 <!entity copyright SYSTEM "copyright.sgml">
10 <!entity license SYSTEM "license.sgml">
11 <!entity p-version "3.1.1">
12 <!entity p-status "alpha">
13 <!entity % p-not-stable "INCLUDE">
14 <!entity % p-stable "IGNORE">
15 <!entity % p-text "IGNORE"> <!-- define we are not a text only doc -->
16 <!entity % p-doc "INCLUDE"> <!-- and we are a formal doc -->
17 <!entity my-copy "©"> <!-- kludge for docbook2man -->
20 File : $Source: /cvsroot/ijbswa/current/doc/source/developer-manual.sgml,v $
22 Purpose : developer manual
23 This file belongs into
24 ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
26 $Id: developer-manual.sgml,v 1.47 2002/05/26 04:55:11 mal0rd Exp $
28 Copyright (C) 2001, 2002 Privoxy Developers <developers@privoxy.org>
31 ========================================================================
32 NOTE: Please read developer-manual/documentation.html before touching
33 anything in this, or other Privoxy documentation. You have been warned!
34 Failure to abide by this rule will result in the revocation of your license
35 to live a peaceful existence!
36 ========================================================================
42 <title>Privoxy Developer Manual</title>
45 <!-- Completely the wrong markup, but very little is allowed -->
46 <!-- in this part of an article. FIXME -->
47 <link linkend="copyright">Copyright</link> &my-copy; 2001, 2002 by
48 <ulink url="http://www.privoxy.org">Privoxy Developers</ulink>
53 <pubdate>$Id: developer-manual.sgml,v 1.47 2002/05/26 04:55:11 mal0rd Exp $</pubdate>
57 Note: this should generate a separate page, and a live link to it.
58 But it doesn't for some mysterious reason. Please leave commented
59 unless it can be fixed proper. For the time being, the copyright
60 statement will be in copyright.smgl.
64 <legalnotice id="legalnotice">
66 text goes here ........
77 This is here to keep vim syntax file from breaking :/
78 If I knew enough to fix it, I would.
79 PLEASE DO NOT REMOVE! HB: hal@foobox.net
84 The developer manual provides guidance on coding, testing, packaging, documentation
85 and other issues of importance to those involved with
86 <application>Privoxy</application> development. It is mandatory (and helpful!) reading
87 for anyone who wants to join the team.
90 <!-- Include privoxy.sgml boilerplate text: -->
92 <!-- &p-intro; Someone interested enough in the project to contribute
93 will already know at this point what Privoxy is. -->
95 <!-- end boilerplate -->
98 You can find the latest version of the this manual at <ulink
99 url="http://www.privoxy.org/developer-manual/">http://www.privoxy.org/developer-manual/</ulink>.
100 Please see <link linkend="contact">the Contact section</link>
101 on how to contact the developers.
104 <!-- Feel free to send a note to the developers at <email>ijbswa-developers@lists.sourceforge.net</email>. -->
111 <!-- ~~~~~ New section ~~~~~ -->
112 <sect1 id="introduction"><title>Introduction</title>
115 I don't like seeing blank space :) So added *something* here.
119 <application>Privoxy</application>, as an heir to
120 <application>Junkbuster</application>, is an Open Source project
121 and licensed under the GPL. As such, <application>Privoxy</application>
122 development is potentially open to anyone who has the time, knowledge,
123 and desire to contribute in any capacity. Our goals are simply to
124 continue the mission, to improve <application>Privoxy</application>, and
125 to make it available to as wide an audience as possible.
128 One does not have to be a programmer to contribute. Packaging, testing,
129 and porting, are all important jobs as well.
132 <!-- ~~~~~ New section ~~~~~ -->
133 <sect2 id="quickstart"><title>Quickstart to Privoxy Development</title>
135 You'll need an account on <ulink
136 url="http://sourceforge.net/">Sourceforge</ulink> to support our
137 development. Mail your ID to <ulink
138 url="mailto:developers@privoxy.org">the list</ulink> and wait until a
139 project manager has added you.
142 For the time being (read, this section is under construction), please
143 refer to the extensive comments in the source code.
148 <!-- ~~~~~ New section ~~~~~ -->
149 <sect1 id="cvs"><title>The CVS Repository</title>
151 If you intend to help us with programming, documentation or packaging
152 you will need write access to our holy grail, the CVS repository.
153 Please read this chapter completely before accessing via CVS.
156 <sect2 id="cvsaccess"><title>Access to CVS</title>
158 The project's CVS repository is hosted on
159 <ulink url="http://sourceforge.net/">SourceForge.</ulink>
160 Please refer to the chapters 6 and 7 in
161 <ulink url="http://sourceforge.net/docman/?group_id=1">SF's site
162 documentation</ulink> for the technical access details for your
163 operating system. For historical reasons, the CVS server is
164 called <literal>cvs.ijbswa.sourceforge.net</literal>, the repository is
165 called <literal>ijbswa</literal>, and the source tree module is called
166 <literal>current</literal>.
170 <sect2 id="cvscommit"><title>CVS Commit Guideline</title>
172 The source tree is the heart of every software project. Every effort must
173 be made to ensure that it is readable, compilable and consistent at all
174 times. We therefore ask anyone with CVS access to strictly adhere to the
175 following guidelines:
178 Never (read: <emphasis>never, ever</emphasis>) be tempted to commit
179 that small change without testing it thoroughly first. When we're
180 close to a public release, ask a fellow developer to review your
184 Your commit message should give a concise overview of <emphasis>what you
185 changed</emphasis> (no big details) and <emphasis>why you changed it</emphasis>
186 Just check previous messages for good examples.
189 Don't use the same message on multiple files, unless it equally applies to
193 If your changes span multiple files, and the code won't recompile unless
194 all changes are commited (e.g. when changing the signature of a function),
195 then commit all files one after another, without long delays in beween.
196 If necessary, prepare the commit messages in advance.
199 Before changing things on CVS, make sure that your changes are in line
200 with the team's general consensus on what should be done (see below).
206 <sect2 id="cvswhenask"><title>Discussing Changes First</title>
208 We don't have a too formal policy on this, just use common sense. Hints: If it is..
209 <orderedlist numeration="arabic">
211 ..a bugfix / clean-up / cosmetic thing: shoot
214 ..a new feature that can be turned off: shoot
217 ..a clear improvement w/o side effects on other parts of the code: shoot
220 ..a matter of taste: <ulink url="mailto:developers@privoxy.org">ask the list</ulink>
223 ..a major redesign of some part of the code: <ulink url="mailto:developers@privoxy.org">ask
229 Note that near a major public release, we get a bit more cautious - if
230 unsure, it doesn't hurt to ask first. There is always the possibility
231 to submit a patch to the <ulink
232 url="http://sourceforge.net/tracker/?atid=311118&group_id=11118&func=browse">patches
233 tracker</ulink> instead.
238 <!-- ~~~~~ New section ~~~~~ -->
239 <sect1 id="documentation"><title>Documentation Guidelines</title>
241 All formal documents are maintained in Docbook SGML and located in the
242 <computeroutput>doc/source/*</computeroutput> directory. You will need
243 <ulink url="http://www.docbook.org">Docbook</ulink>, the Docbook
244 DTD's and the Docbook modular stylesheets (or comparable alternatives),
245 and either <application>jade</application> or
246 <application>openjade</application> (recommended) installed in order to
247 build docs from source. Currently there is <ulink
248 url="../user-manual/index.html"><citetitle>user-manual</citetitle></ulink>,
249 <ulink url="../faq/index.html"><citetitle>FAQ</citetitle></ulink>, and, of
250 course this, the <citetitle>developer-manual</citetitle> in this format.
251 The <citetitle>README</citetitle>, <citetitle>AUTHORS</citetitle>
252 <citetitle>privoxy.1</citetitle> (man page) files are also now maintained
253 as Docbook SGML. The finished files are all in the top-level source
254 directory are generated files! Also, <filename>index.html</filename>, the
255 <application>Privoxy</application> home page, is maintained as SGML.
256 <emphasis>DO NOT edit these directly</emphasis>. Edit the SGML source, or
257 contact someone involved in the documentation (at present Stefan and
261 Other, less formal documents (e.g. <filename>LICENSE</filename>,
262 <filename>INSTALL</filename>) are maintained as plain text files in the
263 top-level source directory. At least for the time being.
266 Packagers are encouraged to include this documentation. For those without
267 the ability to build the docs locally, text versions of each are kept in
268 CVS. HTML versions are also now being kept in CVS under
269 <filename>doc/webserver/*</filename>.
272 Formal documents are built with the Makefile targets of
273 <computeroutput>make dok</computeroutput>, or alternately
274 <computeroutput>make redhat-dok</computeroutput>. If you have problems,
275 try both. The build process uses the document SGML sources in
276 <computeroutput>doc/source/*/*</computeroutput> to update all text files in
277 <computeroutput>doc/text/</computeroutput> and to update all HTML
278 documents in <computeroutput>doc/webserver/</computeroutput>.
281 Documentation writers should please make sure documents build
282 successfully before committing to CVS, if possible.
285 How do you update the webserver (i.e. the pages on privoxy.org)?
287 <orderedlist numeration="arabic">
289 First, build the docs by running <computeroutput>make
290 dok</computeroutput> (or alternately <computeroutput>make
291 redhat-dok</computeroutput>).
294 Run <computeroutput>make webserver</computeroutput> which copies all
295 files from <computeroutput>doc/webserver</computeroutput> to the
296 sourceforge webserver via scp.
302 Finished docs should be occasionally submitted to CVS
303 (<filename>doc/webserver/*/*.html</filename>) so that those without
304 the ability to build them locally, have access to them if needed.
305 This is especially important just prior to a new release! Please
306 do this <emphasis>after</emphasis> the <literal>$VERSION</literal> and
307 other release specific data in <filename>configure.in</filename> has been
308 updated (this is done just prior to a new release).
311 <!-- ~~~~~ New section ~~~~~ -->
313 <title>Quickstart to Docbook and SGML</title>
315 If you are not familiar with SGML, it is a markup language similar to HTML.
316 Actually, not a mark up language per se, but a language used to define
317 markup languages. In fact, HTML is an SGML application. Both will use
318 <quote>tags</quote> to format text and other content. SGML tags can be much
319 more varied, and flexible, but do much of the same kinds of things. The tags,
320 or <quote>elements</quote>, are definable in SGML. There is no set
321 <quote>standards</quote>. Since we are using
322 <application>Docbook</application>, our tags are those that are defined by
323 <application>Docbook</application>. Much of how the finish document is
324 rendered is determined by the <quote>stylesheets</quote>.
325 The stylesheets determine how each tag gets translated to HTML, or other
330 Tags in Docbook SGML need to be always <quote>closed</quote>. If not, you
331 will likely generate errors. Example: <literal><title>My
332 Title</title></literal>. They are also case-insensitive, but we
333 strongly suggest using all lower case. This keeps compatibility with
334 [Docbook] <application>XML</application>.
338 Our documents use <quote>sections</quote> for the most part. Sections
339 will be processed into HTML headers (e.g. <literal>h1</literal> for
340 <literal>sect1</literal>). The <application>Docbook</application> stylesheets
341 will use these to also generate the Table of Contents for each doc. Our
342 TOC's are set to a depth of three. Meaning <literal>sect1</literal>,
343 <literal>sect2</literal>, and <literal>sect3</literal> will have TOC
344 entries, but <literal>sect4</literal> will not. Each section requires
345 a <literal><title></literal> element, and at least one
346 <literal><para></literal>. There is a limit of five section
347 levels in Docbook, but generally three should be sufficient for our
352 Some common elements that you likely will use:
358 <emphasis><para></para></emphasis>, paragraph delimiter. Most
359 text needs to be within paragraph elements (there are some exceptions).
362 <emphasis><emphasis></emphasis></emphasis>, the stylesheets
366 <emphasis><filename></filename></emphasis>, files and directories.
369 <emphasis><command></command></emphasis>, command examples.
372 <emphasis><literallayout></literallayout></emphasis>, like
373 <literal><pre></literal>, more or less.
376 <emphasis><itemizedlist></itemizedlist></emphasis>, list with bullets.
379 <emphasis><listitem></listitem></emphasis>, member of the above.
382 <emphasis><screen></screen></emphasis>, screen output, implies
383 <literal><literallayout></literal>.
386 <emphasis><ulink url="example.com"></ulink></emphasis>, like
387 HTML <literal><a></literal> tag.
390 <emphasis><quote></quote></emphasis>, for, doh, quoting text.
396 Look at any of the existing docs for examples of all these and more.
400 You might also find <quote><ulink
401 url="http://www.bureau-cornavin.com/opensource/crash-course/">Writing Documentation
402 Using DocBook - A Crash Course</ulink></quote> useful.
406 <!-- ~~~~~ New section ~~~~~ -->
407 <sect2 id="docstyle">
408 <title><application>Privoxy</application> Documentation Style</title>
410 It will be easier if everyone follows a similar writing style. This
411 just makes it easier to read what someone else has written if it
412 is all done in a similar fashion.
421 All tags should be lower case.
426 Tags delimiting a <emphasis>block</emphasis> of text (even small
427 blocks) should be on their own line. Like:
433 Tags marking individual words, or few words, should be in-line:
435 Just to <emphasis>emphasize</emphasis>, some text goes here.
441 Tags should be nested and step indented for block text like: (except
448 Some text goes here in our list example.
451 </itemizedlist>
454 This makes it easier to find the text amongst the tags ;-)
459 Use white space to separate logical divisions within a document,
460 like between sections. Running everything together consistently
461 makes it harder to read and work on.
466 Do not hesitate to make comments. Comments can either use the
467 <comment> element, or the <!-- --> style comment
468 familiar from HTML. (Note in Docbook v4.x <comment> is
469 replaced by <remark>.)
474 We have an international audience. Refrain from slang, or English
475 idiosyncrasies (too many to list :). Humor also does not translate
481 Try to keep overall line lengths in source files to 80 characters or less
482 for obvious reasons. This is not always possible, with lengthy URLs for
488 Our documents are available in differing formats. Right now, they
489 are just plain text, and HTML, but PDF, and others is always a
490 future possibility. Be careful with URLs (<ulink>), and avoid
494 My favorite site is <ulink url="http://example.com">here</ulink>.
497 This will render as <quote>My favorite site is here</quote>, which is
498 not real helpful in a text doc. Better like this:
501 My favorite site is <ulink url="http://example.com">example.com</ulink>.
506 All documents should be spell checked occasionally.
507 <application>aspell</application> can check SGML with the
508 <literal>-H</literal> option. (<application>ispell</application> I think
519 <!-- ~~~~~ New section ~~~~~ -->
521 <sect2><title>Privoxy Custom Entities</title>
523 <application>Privoxy</application> documentation is using
524 a number of customized <quote>entities</quote> to facilitate
525 documentation maintenance.
528 We are using a set of <quote>boilerplate</quote> files with generic text,
529 that is used by multiple docs. This way we can write something once, and use
530 it repeatedly without having to re-write the same content over and over again.
531 If editing such a file, keep in mind that it should be
532 <emphasis>generic</emphasis>. That is the purpose; so it can be used in varying
533 contexts without additional modifications.
536 We are also using what <application>Docbook</application> calls
537 <quote>internal entities</quote>. These are like variables in
538 programming. Well, sort of. For instance, we have the
539 <literal>p-version</literal> entity that contains the current
540 <application>Privoxy</application> version string. You are strongly
541 encouraged to use these where possible. Some of these obviously
542 require re-setting with each release (done by the Makefile). A sampling of
543 custom entities are listed below. See any of the main docs for examples.
550 Re- <quote>boilerplate</quote> text entities are defined like:
553 <literal><!entity supported SYSTEM "supported.sgml"></literal>
556 In this example, the contents of the file,
557 <filename>supported.sgml</filename> is available for inclusion anywhere
558 in the doc. To make this happen, just reference the now defined
559 entity: <literal>&supported;</literal> (starts with an ampersand
560 and ends with a semi-colon), and the contents will be dumped into
561 the finished doc at that point.
566 Commonly used <quote>internal entities</quote>:
570 <emphasis>p-version</emphasis>: the <application>Privoxy</application>
571 version string, e.g. <quote>&p-version;</quote>.
574 <emphasis>p-status</emphasis>: the project status, either
575 <quote>alpha</quote>, <quote>beta</quote>, or <quote>stable</quote>.
578 <emphasis>p-not-stable</emphasis>: use to conditionally include
579 text in <quote>not stable</quote> releases (e.g. <quote>beta</quote>).
582 <emphasis>p-stable</emphasis>: just the opposite.
585 <emphasis>p-text</emphasis>: this doc is only generated as text.
592 There are others in various places that are defined for a specific
593 purpose. Read the source!
600 <!-- <listitem><para>be consistent with the redirect script (i.e. the <application>Privoxy</application> program -->
601 <!-- points via the redirect URL at sf to valid end-points in the document)</para></listitem> -->
603 <!-- ~~~~~ New section ~~~~~ -->
604 <sect1 id="coding"><title>Coding Guidelines</title>
606 <sect2 id="s1"><title>Introduction</title>
608 <para>This set of standards is designed to make our lives easier. It is
609 developed with the simple goal of helping us keep the "new and improved
610 <application>Privoxy</application>" consistent and reliable. Thus making
611 maintenance easier and increasing chances of success of the
614 <para>And that of course comes back to us as individuals. If we can
615 increase our development and product efficiencies then we can solve more
616 of the request for changes/improvements and in general feel good about
617 ourselves. ;-></para>
621 <sect2 id="s2"><title>Using Comments</title>
624 <sect3 id="s3"><title>Comment, Comment, Comment</title>
626 <para><emphasis>Explanation:</emphasis></para>
628 <para>Comment as much as possible without commenting the obvious.
629 For example do not comment "aVariable is equal to bVariable".
630 Instead explain why aVariable should be equal to the bVariable.
631 Just because a person can read code does not mean they will
632 understand why or what is being done. A reader may spend a lot
633 more time figuring out what is going on when a simple comment
634 or explanation would have prevented the extra research. Please
635 help your brother IJB'ers out!</para>
637 <para>The comments will also help justify the intent of the code.
638 If the comment describes something different than what the code
639 is doing then maybe a programming error is occurring.</para>
641 <para><emphasis>Example:</emphasis></para>
643 /* if page size greater than 1k ... */
644 if ( PageLength() > 1024 )
646 ... "block" the page up ...
649 /* if page size is small, send it in blocks */
650 if ( PageLength() > 1024 )
652 ... "block" the page up ...
655 This demonstrates 2 cases of "what not to do". The first is a
656 "syntax comment". The second is a comment that does not fit what
657 is actually being done.
663 <sect3 id="s4"><title>Use blocks for comments</title>
665 <para><emphasis>Explanation:</emphasis></para>
667 <para>Comments can help or they can clutter. They help when they
668 are differentiated from the code they describe. One line
669 comments do not offer effective separation between the comment
670 and the code. Block identifiers do, by surrounding the code
671 with a clear, definable pattern.</para>
673 <para><emphasis>Example:</emphasis></para>
675 /*********************************************************************
676 * This will stand out clearly in your code!
677 *********************************************************************/
678 if ( thisVariable == thatVariable )
680 DoSomethingVeryImportant();
684 /* unfortunately, this may not */
685 if ( thisVariable == thatVariable )
687 DoSomethingVeryImportant();
691 if ( thisVariable == thatVariable ) /* this may not either */
693 DoSomethingVeryImportant();
696 <para><emphasis>Exception:</emphasis></para>
698 <para>If you are trying to add a small logic comment and do not
699 wish to "disrupt" the flow of the code, feel free to use a 1
700 line comment which is NOT on the same line as the code.</para>
706 <sect3 id="s5"><title>Keep Comments on their own line</title>
708 <para><emphasis>Explanation:</emphasis></para>
710 <para>It goes back to the question of readability. If the comment
711 is on the same line as the code it will be harder to read than
712 the comment that is on its own line.</para>
714 <para>There are three exceptions to this rule, which should be
715 violated freely and often: during the definition of variables,
716 at the end of closing braces, when used to comment
719 <para><emphasis>Example:</emphasis></para>
721 /*********************************************************************
722 * This will stand out clearly in your code,
723 * But the second example won't.
724 *********************************************************************/
725 if ( thisVariable == thatVariable )
727 DoSomethingVeryImportant();
730 if ( thisVariable == thatVariable ) /*can you see me?*/
732 DoSomethingVeryImportant(); /*not easily*/
736 /*********************************************************************
737 * But, the encouraged exceptions:
738 *********************************************************************/
739 int urls_read = 0; /* # of urls read + rejected */
740 int urls_rejected = 0; /* # of urls rejected */
744 DoSomethingVeryImportant();
748 short DoSomethingVeryImportant(
749 short firstparam, /* represents something */
750 short nextparam /* represents something else */ )
754 } /* -END- DoSomethingVeryImportant */
759 <sect3 id="s6"><title>Comment each logical step</title>
761 <para><emphasis>Explanation:</emphasis></para>
763 <para>Logical steps should be commented to help others follow the
764 intent of the written code and comments will make the code more
767 <para>If you have 25 lines of code without a comment, you should
768 probably go back into it to see where you forgot to put
771 <para>Most "for", "while", "do", etc... loops _probably_ need a
772 comment. After all, these are usually major logic
779 <sect3 id="s7"><title>Comment All Functions Thoroughly</title>
781 <para><emphasis>Explanation:</emphasis></para>
783 <para>A reader of the code should be able to look at the comments
784 just prior to the beginning of a function and discern the
785 reason for its existence and the consequences of using it. The
786 reader should not have to read through the code to determine if
787 a given function is safe for a desired use. The proper
788 information thoroughly presented at the introduction of a
789 function not only saves time for subsequent maintenance or
790 debugging, it more importantly aids in code reuse by allowing a
791 user to determine the safety and applicability of any function
792 for the problem at hand. As a result of such benefits, all
793 functions should contain the information presented in the
794 addendum section of this document.</para>
800 <sect3 id="s8"><title>Comment at the end of braces if the
801 content is more than one screen length</title>
803 <para><emphasis>Explanation:</emphasis></para>
805 <para>Each closing brace should be followed on the same line by a
806 comment that describes the origination of the brace if the
807 original brace is off of the screen, or otherwise far away from
808 the closing brace. This will simplify the debugging,
809 maintenance, and readability of the code.</para>
811 <para>As a suggestion , use the following flags to make the
812 comment and its brace more readable:</para>
814 <para>use following a closing brace: } /* -END- if() or while ()
817 <para><emphasis>Example:</emphasis></para>
821 DoSomethingVeryImportant();
822 ...some long list of commands...
823 } /* -END- if x is 1 */
829 DoSomethingVeryImportant();
830 ...some long list of commands...
831 } /* -END- if ( 1 == X ) */
837 <sect2 id="s9"><title>Naming Conventions</title>
841 <sect3 id="s10"><title>Variable Names</title>
843 <para><emphasis>Explanation:</emphasis></para>
845 <para>Use all lowercase, and separate words via an underscore
846 ('_'). Do not start an identifier with an underscore. (ANSI C
847 reserves these for use by the compiler and system headers.) Do
848 not use identifiers which are reserved in ANSI C++. (E.g.
849 template, class, true, false, ...). This is in case we ever
850 decide to port Privoxy to C++.</para>
852 <para><emphasis>Example:</emphasis></para>
854 int ms_iis5_hack = 0;</programlisting>
856 <para><emphasis>Instead of:</emphasis></para>
860 int msiis5hack = 0; int msIis5Hack = 0;
868 <sect3 id="s11"><title>Function Names</title>
870 <para><emphasis>Explanation:</emphasis></para>
872 <para>Use all lowercase, and separate words via an underscore
873 ('_'). Do not start an identifier with an underscore. (ANSI C
874 reserves these for use by the compiler and system headers.) Do
875 not use identifiers which are reserved in ANSI C++. (E.g.
876 template, class, true, false, ...). This is in case we ever
877 decide to port Privoxy to C++.</para>
879 <para><emphasis>Example:</emphasis></para>
881 int load_some_file( struct client_state *csp )</programlisting>
883 <para><emphasis>Instead of:</emphasis></para>
887 int loadsomefile( struct client_state *csp )
888 int loadSomeFile( struct client_state *csp )
896 <sect3 id="s12"><title>Header file prototypes</title>
898 <para><emphasis>Explanation:</emphasis></para>
900 <para>Use a descriptive parameter name in the function prototype
901 in header files. Use the same parameter name in the header file
902 that you use in the c file.</para>
904 <para><emphasis>Example:</emphasis></para>
906 (.h) extern int load_aclfile( struct client_state *csp );
907 (.c) int load_aclfile( struct client_state *csp )</programlisting>
909 <para><emphasis>Instead of:</emphasis>
911 (.h) extern int load_aclfile( struct client_state * ); or
912 (.h) extern int load_aclfile();
913 (.c) int load_aclfile( struct client_state *csp )
921 <sect3 id="s13"><title>Enumerations, and #defines</title>
923 <para><emphasis>Explanation:</emphasis></para>
925 <para>Use all capital letters, with underscores between words. Do
926 not start an identifier with an underscore. (ANSI C reserves
927 these for use by the compiler and system headers.)</para>
929 <para><emphasis>Example:</emphasis></para>
931 (enumeration) : enum Boolean { FALSE, TRUE };
932 (#define) : #define DEFAULT_SIZE 100;</programlisting>
934 <para><emphasis>Note:</emphasis> We have a standard naming scheme for #defines
935 that toggle a feature in the preprocessor: FEATURE_>, where
936 > is a short (preferably 1 or 2 word) description.</para>
938 <para><emphasis>Example:</emphasis></para>
940 #define FEATURE_FORCE 1
943 #define FORCE_PREFIX blah
944 #endif /* def FEATURE_FORCE */
949 <sect3 id="s14"><title>Constants</title>
951 <para><emphasis>Explanation:</emphasis></para>
953 <para>Spell common words out entirely (do not remove vowels).</para>
955 <para>Use only widely-known domain acronyms and abbreviations.
956 Capitalize all letters of an acronym.</para>
958 <para>Use underscore (_) to separate adjacent acronyms and
959 abbreviations. Never terminate a name with an underscore.</para>
961 <para><emphasis>Example:</emphasis></para>
963 #define USE_IMAGE_LIST 1</programlisting>
965 <para><emphasis>Instead of:</emphasis></para>
969 #define USE_IMG_LST 1 or
970 #define _USE_IMAGE_LIST 1 or
971 #define USE_IMAGE_LIST_ 1 or
972 #define use_image_list 1 or
973 #define UseImageList 1
983 <sect2 id="s15"><title>Using Space</title>
987 <sect3 id="s16"><title>Put braces on a line by themselves.</title>
989 <para><emphasis>Explanation:</emphasis></para>
991 <para>The brace needs to be on a line all by itself, not at the
992 end of the statement. Curly braces should line up with the
993 construct that they're associated with. This practice makes it
994 easier to identify the opening and closing braces for a
997 <para><emphasis>Example:</emphasis></para>
1004 <para><emphasis>Instead of:</emphasis></para>
1006 <para>if ( this == that ) { ... }</para>
1010 <para>if ( this == that ) { ... }</para>
1012 <para><emphasis>Note:</emphasis> In the special case that the if-statement is
1013 inside a loop, and it is trivial, i.e. it tests for a
1014 condition that is obvious from the purpose of the block,
1015 one-liners as above may optically preserve the loop structure
1016 and make it easier to read.</para>
1018 <para><emphasis>Status:</emphasis> developer-discretion.</para>
1020 <para><emphasis>Example exception:</emphasis></para>
1022 while ( more lines are read )
1024 /* Please document what is/is not a comment line here */
1025 if ( it's a comment ) continue;
1027 do_something( line );
1033 <sect3 id="s17"><title>ALL control statements should have a
1036 <para><emphasis>Explanation:</emphasis></para>
1038 <para>Using braces to make a block will make your code more
1039 readable and less prone to error. All control statements should
1040 have a block defined.</para>
1042 <para><emphasis>Example:</emphasis></para>
1050 <para><emphasis>Instead of:</emphasis></para>
1052 <para>if ( this == that ) DoSomething(); DoSomethingElse();</para>
1056 <para>if ( this == that ) DoSomething();</para>
1058 <para><emphasis>Note:</emphasis> The first example in "Instead of" will execute
1059 in a manner other than that which the developer desired (per
1060 indentation). Using code braces would have prevented this
1061 "feature". The "explanation" and "exception" from the point
1062 above also applies.</para>
1068 <sect3 id="s18"><title>Do not belabor/blow-up boolean
1071 <para><emphasis>Example:</emphasis></para>
1073 structure->flag = ( condition );</programlisting>
1075 <para><emphasis>Instead of:</emphasis></para>
1077 <para>if ( condition ) { structure->flag = 1; } else {
1078 structure->flag = 0; }</para>
1080 <para><emphasis>Note:</emphasis> The former is readable and concise. The later
1081 is wordy and inefficient. Please assume that any developer new
1082 to the project has at least a "good" knowledge of C/C++. (Hope
1083 I do not offend by that last comment ... 8-)</para>
1089 <sect3 id="s19"><title>Use white space freely because it is
1092 <para><emphasis>Explanation:</emphasis></para>
1094 <para>Make it readable. The notable exception to using white space
1095 freely is listed in the next guideline.</para>
1097 <para><emphasis>Example:</emphasis></para>
1101 int anotherValue = 0;
1102 int thisVariable = 0;
1104 if ( thisVariable == thatVariable )
1106 firstValue = oldValue + ( ( someValue - anotherValue ) - whatever )
1111 <sect3 id="s20"><title>Don't use white space around structure
1114 <para><emphasis>Explanation:</emphasis></para>
1116 <para>- structure pointer operator ( "->" ) - member operator (
1117 "." ) - functions and parentheses</para>
1119 <para>It is a general coding practice to put pointers, references,
1120 and function parentheses next to names. With spaces, the
1121 connection between the object and variable/function name is not
1124 <para><emphasis>Example:</emphasis></para>
1128 FunctionName();</programlisting>
1130 <para><emphasis>Instead of:</emphasis> aStruct -> aMember; aStruct . aMember;
1131 FunctionName ();</para>
1137 <sect3 id="s21"><title>Make the last brace of a function stand
1140 <para><emphasis>Example:</emphasis></para>
1142 int function1( ... )
1147 } /* -END- function1 */
1150 int function2( ... )
1152 } /* -END- function2 */
1155 <para><emphasis>Instead of:</emphasis></para>
1157 <para>int function1( ... ) { ...code... return( retCode ); } int
1158 function2( ... ) { }</para>
1160 <para><emphasis>Note:</emphasis> Use 1 blank line before the closing brace and 2
1161 lines afterward. This makes the end of function standout to
1162 the most casual viewer. Although function comments help
1163 separate functions, this is still a good coding practice. In
1164 fact, I follow these rules when using blocks in "for", "while",
1165 "do" loops, and long if {} statements too. After all whitespace
1168 <para><emphasis>Status:</emphasis> developer-discretion on the number of blank
1169 lines. Enforced is the end of function comments.</para>
1175 <sect3 id="s22"><title>Use 3 character indentions</title>
1177 <para><emphasis>Explanation:</emphasis></para>
1179 <para>If some use 8 character TABs and some use 3 character TABs,
1180 the code can look *very* ragged. So use 3 character indentions
1181 only. If you like to use TABs, pass your code through a filter
1182 such as "expand -t3" before checking in your code.</para>
1184 <para><emphasis>Example:</emphasis></para>
1186 static const char * const url_code_map[256] =
1192 int function1( ... )
1196 return( ALWAYS_TRUE );
1200 return( HOW_DID_YOU_GET_HERE );
1203 return( NEVER_GETS_HERE );
1212 <sect2 id="s23"><title>Initializing</title>
1216 <sect3 id="s24"><title>Initialize all variables</title>
1218 <para><emphasis>Explanation:</emphasis></para>
1220 <para>Do not assume that the variables declared will not be used
1221 until after they have been assigned a value somewhere else in
1222 the code. Remove the chance of accidentally using an unassigned
1225 <para><emphasis>Example:</emphasis></para>
1229 struct *ptr = NULL;</programlisting>
1231 <para><emphasis>Note:</emphasis> It is much easier to debug a SIGSEGV if the
1232 message says you are trying to access memory address 00000000
1233 and not 129FA012; or arrayPtr[20] causes a SIGSEV vs.
1236 <para><emphasis>Status:</emphasis> developer-discretion if and only if the
1237 variable is assigned a value "shortly after" declaration.</para>
1243 <sect2 id="s25"><title>Functions</title>
1247 <sect3 id="s26"><title>Name functions that return a boolean as a
1250 <para><emphasis>Explanation:</emphasis></para>
1252 <para>Value should be phrased as a question that would logically
1253 be answered as a true or false statement</para>
1255 <para><emphasis>Example:</emphasis></para>
1257 ShouldWeBlockThis();
1264 <sect3 id="s27"><title>Always specify a return type for a
1267 <para><emphasis>Explanation:</emphasis></para>
1269 <para>The default return for a function is an int. To avoid
1270 ambiguity, create a return for a function when the return has a
1271 purpose, and create a void return type if the function does not
1272 need to return anything.</para>
1278 <sect3 id="s28"><title>Minimize function calls when iterating by
1279 using variables</title>
1281 <para><emphasis>Explanation:</emphasis></para>
1283 <para>It is easy to write the following code, and a clear argument
1284 can be made that the code is easy to understand:</para>
1286 <para><emphasis>Example:</emphasis></para>
1288 for ( size_t cnt = 0; cnt < blockListLength(); cnt ++ )
1293 <para><emphasis>Note:</emphasis> Unfortunately, this makes a function call for
1294 each and every iteration. This increases the overhead in the
1295 program, because the compiler has to look up the function each
1296 time, call it, and return a value. Depending on what occurs in
1297 the blockListLength() call, it might even be creating and
1298 destroying structures with each iteration, even though in each
1299 case it is comparing "cnt" to the same value, over and over.
1300 Remember too - even a call to blockListLength() is a function
1301 call, with the same overhead.</para>
1303 <para>Instead of using a function call during the iterations,
1304 assign the value to a variable, and evaluate using the
1307 <para><emphasis>Example:</emphasis></para>
1309 size_t len = blockListLength();
1311 for ( size_t cnt = 0; cnt < len; cnt ++ )
1316 <para><emphasis>Exceptions:</emphasis> if the value of blockListLength() *may*
1317 change or could *potentially* change, then you must code the
1318 function call in the for/while loop.</para>
1324 <sect3 id="s29"><title>Pass and Return by Const Reference</title>
1326 <para><emphasis>Explanation:</emphasis></para>
1328 <para>This allows a developer to define a const pointer and call
1329 your function. If your function does not have the const
1330 keyword, we may not be able to use your function. Consider
1331 strcmp, if it were defined as: extern int strcmp( char *s1,
1334 <para>I could then not use it to compare argv's in main: int main(
1335 int argc, const char *argv[] ) { strcmp( argv[0], "privoxy"
1338 <para>Both these pointers are *const*! If the c runtime library
1339 maintainers do it, we should too.</para>
1345 <sect3 id="s30"><title>Pass and Return by Value</title>
1347 <para><emphasis>Explanation:</emphasis></para>
1349 <para>Most structures cannot fit onto a normal stack entry (i.e.
1350 they are not 4 bytes or less). Aka, a function declaration
1351 like: int load_aclfile( struct client_state csp )</para>
1353 <para>would not work. So, to be consistent, we should declare all
1354 prototypes with "pass by value": int load_aclfile( struct
1355 client_state *csp )</para>
1361 <sect3 id="s31"><title>Names of include files</title>
1363 <para><emphasis>Explanation:</emphasis></para>
1365 <para>Your include statements should contain the file name without
1366 a path. The path should be listed in the Makefile, using -I as
1367 processor directive to search the indicated paths. An exception
1368 to this would be for some proprietary software that utilizes a
1369 partial path to distinguish their header files from system or
1370 other header files.</para>
1372 <para><emphasis>Example:</emphasis></para>
1374 #include <iostream.h> /* This is not a local include */
1375 #include "config.h" /* This IS a local include */
1378 <para><emphasis>Exception:</emphasis></para>
1382 /* This is not a local include, but requires a path element. */
1383 #include <sys/fileName.h>
1387 <para><emphasis>Note:</emphasis> Please! do not add "-I." to the Makefile
1388 without a _very_ good reason. This duplicates the #include
1389 "file.h" behavior.</para>
1395 <sect3 id="s32"><title>Provide multiple inclusion
1398 <para><emphasis>Explanation:</emphasis></para>
1400 <para>Prevents compiler and linker errors resulting from
1401 redefinition of items.</para>
1403 <para>Wrap each header file with the following syntax to prevent
1404 multiple inclusions of the file. Of course, replace PROJECT_H
1405 with your file name, with "." Changed to "_", and make it
1408 <para><emphasis>Example:</emphasis></para>
1410 #ifndef PROJECT_H_INCLUDED
1411 #define PROJECT_H_INCLUDED
1413 #endif /* ndef PROJECT_H_INCLUDED */
1418 <sect3 id="s33"><title>Use `extern "C"` when appropriate</title>
1420 <para><emphasis>Explanation:</emphasis></para>
1422 <para>If our headers are included from C++, they must declare our
1423 functions as `extern "C"`. This has no cost in C, but increases
1424 the potential re-usability of our code.</para>
1426 <para><emphasis>Example:</emphasis></para>
1431 #endif /* def __cplusplus */
1433 ... function definitions here ...
1437 #endif /* def __cplusplus */
1442 <sect3 id="s34"><title>Where Possible, Use Forward Struct
1443 Declaration Instead of Includes</title>
1445 <para><emphasis>Explanation:</emphasis></para>
1447 <para>Useful in headers that include pointers to other struct's.
1448 Modifications to excess header files may cause needless
1451 <para><emphasis>Example:</emphasis></para>
1453 /*********************************************************************
1454 * We're avoiding an include statement here!
1455 *********************************************************************/
1457 extern file_list *xyz;</programlisting>
1459 <para><emphasis>Note:</emphasis> If you declare "file_list xyz;" (without the
1460 pointer), then including the proper header file is necessary.
1461 If you only want to prototype a pointer, however, the header
1462 file is unnecessary.</para>
1464 <para><emphasis>Status:</emphasis> Use with discretion.</para>
1470 <sect2 id="s35"><title>General Coding Practices</title>
1474 <sect3 id="s36"><title>Turn on warnings</title>
1476 <para><emphasis>Explanation</emphasis></para>
1478 <para>Compiler warnings are meant to help you find bugs. You
1479 should turn on as many as possible. With GCC, the switch is
1480 "-Wall". Try and fix as many warnings as possible.</para>
1486 <sect3 id="s37"><title>Provide a default case for all switch
1489 <para><emphasis>Explanation:</emphasis></para>
1491 <para>What you think is guaranteed is never really guaranteed. The
1492 value that you don't think you need to check is the one that
1493 someday will be passed. So, to protect yourself from the
1494 unknown, always have a default step in a switch statement.</para>
1496 <para><emphasis>Example:</emphasis></para>
1498 switch( hash_string( cmd ) )
1500 case hash_actions_file :
1510 ... anomaly code goes here ...
1511 continue; / break; / exit( 1 ); / etc ...
1513 } /* end switch( hash_string( cmd ) ) */</programlisting>
1515 <para><emphasis>Note:</emphasis> If you already have a default condition, you
1516 are obviously exempt from this point. Of note, most of the
1517 WIN32 code calls `DefWindowProc' after the switch statement.
1518 This API call *should* be included in a default statement.</para>
1520 <para><emphasis>Another Note:</emphasis> This is not so much a readability issue
1521 as a robust programming issue. The "anomaly code goes here" may
1522 be no more than a print to the STDERR stream (as in
1523 load_config). Or it may really be an ABEND condition.</para>
1525 <para><emphasis>Status:</emphasis> Programmer discretion is advised.</para>
1531 <sect3 id="s38"><title>Try to avoid falling through cases in a
1532 switch statement.</title>
1534 <para><emphasis>Explanation:</emphasis></para>
1536 <para>In general, you will want to have a 'break' statement within
1537 each 'case' of a switch statement. This allows for the code to
1538 be more readable and understandable, and furthermore can
1539 prevent unwanted surprises if someone else later gets creative
1540 and moves the code around.</para>
1542 <para>The language allows you to plan the fall through from one
1543 case statement to another simply by omitting the break
1544 statement within the case statement. This feature does have
1545 benefits, but should only be used in rare cases. In general,
1546 use a break statement for each case statement.</para>
1548 <para>If you choose to allow fall through, you should comment both
1549 the fact of the fall through and reason why you felt it was
1556 <sect3 id="s39"><title>Use 'long' or 'short' Instead of
1559 <para><emphasis>Explanation:</emphasis></para>
1561 <para>On 32-bit platforms, int usually has the range of long. On
1562 16-bit platforms, int has the range of short.</para>
1564 <para><emphasis>Status:</emphasis> open-to-debate. In the case of most FSF
1565 projects (including X/GNU-Emacs), there are typedefs to int4,
1566 int8, int16, (or equivalence ... I forget the exact typedefs
1567 now). Should we add these to IJB now that we have a "configure"
1574 <sect3 id="s40"><title>Don't mix size_t and other types</title>
1576 <para><emphasis>Explanation:</emphasis></para>
1578 <para>The type of size_t varies across platforms. Do not make
1579 assumptions about whether it is signed or unsigned, or about
1580 how long it is. Do not compare a size_t against another
1581 variable of a different type (or even against a constant)
1582 without casting one of the values. Try to avoid using size_t if
1589 <sect3 id="s41"><title>Declare each variable and struct on its
1592 <para><emphasis>Explanation:</emphasis></para>
1594 <para>It can be tempting to declare a series of variables all on
1595 one line. Don't.</para>
1597 <para><emphasis>Example:</emphasis></para>
1601 long c = 0;</programlisting>
1603 <para><emphasis>Instead of:</emphasis></para>
1605 <para>long a, b, c;</para>
1607 <para><emphasis>Explanation:</emphasis> - there is more room for comments on the
1608 individual variables - easier to add new variables without
1609 messing up the original ones - when searching on a variable to
1610 find its type, there is less clutter to "visually"
1613 <para><emphasis>Exceptions:</emphasis> when you want to declare a bunch of loop
1614 variables or other trivial variables; feel free to declare them
1615 on 1 line. You should, although, provide a good comment on
1616 their functions.</para>
1618 <para><emphasis>Status:</emphasis> developer-discretion.</para>
1624 <sect3 id="s42"><title>Use malloc/zalloc sparingly</title>
1626 <para><emphasis>Explanation:</emphasis></para>
1628 <para>Create a local struct (on the stack) if the variable will
1629 live and die within the context of one function call.</para>
1631 <para>Only "malloc" a struct (on the heap) if the variable's life
1632 will extend beyond the context of one function call.</para>
1634 <para><emphasis>Example:</emphasis></para>
1636 If a function creates a struct and stores a pointer to it in a
1637 list, then it should definitely be allocated via `malloc'.
1642 <sect3 id="s43"><title>The Programmer Who Uses 'malloc' is
1643 Responsible for Ensuring 'free'</title>
1645 <para><emphasis>Explanation:</emphasis></para>
1647 <para>If you have to "malloc" an instance, you are responsible for
1648 insuring that the instance is `free'd, even if the deallocation
1649 event falls within some other programmer's code. You are also
1650 responsible for ensuring that deletion is timely (i.e. not too
1651 soon, not too late). This is known as "low-coupling" and is a
1652 "good thing (tm)". You may need to offer a
1653 free/unload/destuctor type function to accommodate this.</para>
1655 <para><emphasis>Example:</emphasis></para>
1657 int load_re_filterfile( struct client_state *csp ) { ... }
1658 static void unload_re_filterfile( void *f ) { ... }</programlisting>
1660 <para><emphasis>Exceptions:</emphasis></para>
1662 <para>The developer cannot be expected to provide `free'ing
1663 functions for C run-time library functions ... such as
1666 <para><emphasis>Status:</emphasis> developer-discretion. The "main" use of this
1667 standard is for allocating and freeing data structures (complex
1674 <sect3 id="s44"><title>Add loaders to the `file_list' structure
1675 and in order</title>
1677 <para><emphasis>Explanation:</emphasis></para>
1679 <para>I have ordered all of the "blocker" file code to be in alpha
1680 order. It is easier to add/read new blockers when you expect a
1681 certain order.</para>
1683 <para><emphasis>Note:</emphasis> It may appear that the alpha order is broken in
1684 places by POPUP tests coming before PCRS tests. But since
1685 POPUPs can also be referred to as KILLPOPUPs, it is clear that
1686 it should come first.</para>
1692 <sect3 id="s45"><title>"Uncertain" new code and/or changes to
1693 existing code, use FIXME</title>
1695 <para><emphasis>Explanation:</emphasis></para>
1697 <para>If you have enough confidence in new code or confidence in
1698 your changes, but are not *quite* sure of the repercussions,
1701 <para>/* FIXME: this code has a logic error on platform XYZ, *
1702 attempting to fix */ #ifdef PLATFORM ...changed code here...
1707 <para>/* FIXME: I think the original author really meant this...
1708 */ ...changed code here...</para>
1712 <para>/* FIXME: new code that *may* break something else... */
1713 ...new code here...</para>
1715 <para><emphasis>Note:</emphasis> If you make it clear that this may or may not
1716 be a "good thing (tm)", it will be easier to identify and
1717 include in the project (or conversely exclude from the
1725 <sect2 id="s46"><title>Addendum: Template for files and function
1726 comment blocks:</title>
1728 <para><emphasis>Example for file comments:</emphasis></para>
1730 const char FILENAME_rcs[] = "$Id: developer-manual.sgml,v 1.47 2002/05/26 04:55:11 mal0rd Exp $";
1731 /*********************************************************************
1733 * File : $S<!-- Break CVS Substitution -->ource$
1735 * Purpose : (Fill me in with a good description!)
1737 * Copyright : Written by and Copyright (C) 2001 the SourceForge
1738 * Privoxy team. http://www.privoxy.org/
1740 * Based on the Internet Junkbuster originally written
1741 * by and Copyright (C) 1997 Anonymous Coders and
1742 * Junkbusters Corporation. http://www.junkbusters.com
1744 * This program is free software; you can redistribute it
1745 * and/or modify it under the terms of the GNU General
1746 * Public License as published by the Free Software
1747 * Foundation; either version 2 of the License, or (at
1748 * your option) any later version.
1750 * This program is distributed in the hope that it will
1751 * be useful, but WITHOUT ANY WARRANTY; without even the
1752 * implied warranty of MERCHANTABILITY or FITNESS FOR A
1753 * PARTICULAR PURPOSE. See the GNU General Public
1754 * License for more details.
1756 * The GNU General Public License should be included with
1757 * this file. If not, you can view it at
1758 * http://www.gnu.org/copyleft/gpl.html
1759 * or write to the Free Software Foundation, Inc., 59
1760 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
1763 * $L<!-- Break CVS Substitution -->og$
1765 *********************************************************************/
1770 ...necessary include files for us to do our work...
1772 const char FILENAME_h_rcs[] = FILENAME_H_VERSION;
1775 <para><emphasis>Note:</emphasis> This declares the rcs variables that should be
1776 added to the "show-proxy-args" page. If this is a brand new
1777 creation by you, you are free to change the "Copyright" section
1778 to represent the rights you wish to maintain.</para>
1780 <para><emphasis>Note:</emphasis> The formfeed character that is present right
1781 after the comment flower box is handy for (X|GNU)Emacs users to
1782 skip the verbiage and get to the heart of the code (via
1783 `forward-page' and `backward-page'). Please include it if you
1786 <para><emphasis>Example for file header comments:</emphasis></para>
1790 #define FILENAME_H_VERSION "$Id: developer-manual.sgml,v 1.47 2002/05/26 04:55:11 mal0rd Exp $"
1791 /*********************************************************************
1793 * File : $S<!-- Break CVS Substitution -->ource$
1795 * Purpose : (Fill me in with a good description!)
1797 * Copyright : Written by and Copyright (C) 2001 the SourceForge
1798 * Privoxy team. http://www.privoxy.org/
1800 * Based on the Internet Junkbuster originally written
1801 * by and Copyright (C) 1997 Anonymous Coders and
1802 * Junkbusters Corporation. http://www.junkbusters.com
1804 * This program is free software; you can redistribute it
1805 * and/or modify it under the terms of the GNU General
1806 * Public License as published by the Free Software
1807 * Foundation; either version 2 of the License, or (at
1808 * your option) any later version.
1810 * This program is distributed in the hope that it will
1811 * be useful, but WITHOUT ANY WARRANTY; without even the
1812 * implied warranty of MERCHANTABILITY or FITNESS FOR A
1813 * PARTICULAR PURPOSE. See the GNU General Public
1814 * License for more details.
1816 * The GNU General Public License should be included with
1817 * this file. If not, you can view it at
1818 * http://www.gnu.org/copyleft/gpl.html
1819 * or write to the Free Software Foundation, Inc., 59
1820 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
1823 * $L<!-- Break CVS Substitution -->og$
1825 *********************************************************************/
1828 #include "project.h"
1834 ... function headers here ...
1837 /* Revision control strings from this header and associated .c file */
1838 extern const char FILENAME_rcs[];
1839 extern const char FILENAME_h_rcs[];
1846 #endif /* ndef _FILENAME_H */
1855 <para><emphasis>Example for function comments:</emphasis></para>
1857 /*********************************************************************
1859 * Function : FUNCTION_NAME
1861 * Description : (Fill me in with a good description!)
1864 * 1 : param1 = pointer to an important thing
1865 * 2 : x = pointer to something else
1867 * Returns : 0 => Ok, everything else is an error.
1869 *********************************************************************/
1870 int FUNCTION_NAME( void *param1, const char *x )
1878 <para><emphasis>Note:</emphasis> If we all follow this practice, we should be
1879 able to parse our code to create a "self-documenting" web
1886 <!-- ~~~~~ New section ~~~~~ -->
1887 <sect1 id="testing"><title>Testing Guidelines</title>
1891 <!-- ~~~~~ New section ~~~~~ -->
1892 <sect2 id="testing-plan"><title>Testplan for releases</title>
1894 Explain release numbers. major, minor. developer releases. etc.
1896 <orderedlist numeration="arabic">
1898 Remove any existing rpm with rpm -e
1901 Remove any file that was left over. This includes (but is not limited to)
1903 <listitem><para>/var/log/privoxy</para></listitem>
1904 <listitem><para>/etc/privoxy</para></listitem>
1905 <listitem><para>/usr/sbin/privoxy</para></listitem>
1906 <listitem><para>/etc/init.d/privoxy</para></listitem>
1907 <listitem><para>/usr/doc/privoxy*</para></listitem>
1911 Install the rpm. Any error messages?
1913 <listitem><para>start,stop,status <application>Privoxy</application> with the specific script
1914 (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does
1915 autostart work?</para></listitem>
1916 <listitem><para>Start browsing. Does <application>Privoxy</application> work? Logfile written?</para></listitem>
1917 <listitem><para>Remove the rpm. Any error messages? All files removed?</para></listitem>
1922 <!-- ~~~~~ New section ~~~~~ -->
1923 <sect2 id="testing-report"><title>Test reports</title>
1925 Please submit test reports only with the <ulink url="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=395005">test form</ulink>
1926 at sourceforge. Three simple steps:
1929 <listitem><para>Select category: the distribution you test on.</para></listitem>
1930 <listitem><para>Select group: the version of <application>Privoxy</application> that we are about to release.</para></listitem>
1931 <listitem><para>Fill the Summary and Detailed Description with something
1932 intelligent (keep it short and precise).</para>
1935 Do not mail to the mailinglist (we cannot keep track on issues there).
1941 <!-- ~~~~~ New section ~~~~~ -->
1942 <sect1 id="newrelease"><title>Releasing a New Version</title>
1944 When we release versions of <application>Privoxy</application>,
1945 our work leaves our cozy secret lab and has to work in the cold
1946 RealWorld[tm]. Once it is released, there is no way to call it
1947 back, so it is very important that great care is taken to ensure
1948 that everything runs fine, and not to introduce problems in the
1952 So when releasing a new version, please adhere exactly to the
1953 procedure outlined in this chapter.
1957 The following programs are required to follow this process:
1958 <filename>ncftpput</filename> (ncftp), <filename>scp, ssh</filename> (ssh),
1959 <filename>gmake</filename> (GNU's version of make), autoconf, cvs.
1962 <sect2 id="versionnumbers">
1963 <title>Version numbers</title>
1966 First you need to determine which version number the release will have.
1967 <application>Privoxy</application> version numbers consist of three numbers,
1968 separated by dots, like in X.Y.Z, where:
1972 X, the version major, is rarely ever changed. It is increased by one if
1973 turning a development branch into stable substantially changes the functionality,
1974 user interface or configuration syntax. Majors 1 and 2 were
1975 <application>Junkbuster</application>, and 3 will be the first stable
1976 <application>Privoxy</application> release.
1981 Y, the version minor, represents the branch within the major version.
1982 At any point in time, there are two branches being maintained:
1983 The stable branch, with an even minor, say, 2N, in which no functionality is
1984 being added and only bugfixes are made, and 2N+1, the development branch, in
1985 which the further development of <application>Privoxy</application> takes
1987 This enables us to turn the code upside down and inside out, while at the same time
1988 providing and maintaining a stable version.
1989 The minor is reset to zero (and one) when the major is inrcemented. When a development
1990 branch has matured to the point where it can be turned into stable, the old stable branch
1991 2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the
1992 new stable branch 2N+2, and a new development branch 2N+3 is opened.
1997 Z, the point or sub version, represents a release of the software within a branch.
1998 It is therefore incremented immediately before each code freeze.
1999 In development branches, only the even point versions correspond to actual releases,
2000 while the odd ones denote the evolving state of the sources on CVS in between.
2001 It follows that Z is odd on CVS in development branches most of the time. There, it gets
2002 increased to an even number immediately before a code freeze, and is increased to an odd
2003 number again immediately thereafter.
2004 This ensures that builds from CVS snapshots are easily distinguished from released versions.
2005 The point version is reset to zero when the minor changes.
2013 <sect2 id="beforerelease">
2014 <title>Before the Release: Freeze</title>
2016 The following <emphasis>must be done by one of the
2017 developers</emphasis> prior to each new release.
2023 Make sure that everybody who has worked on the code in the last
2024 couple of days has had a chance to yell <quote>no!</quote> in case
2025 they have pending changes/fixes in their pipelines. Announce the
2026 freeze so that nobody will interfere with last minute changes.
2031 Increment the version number (point from odd to even in development
2032 branches!) in <filename>configure.in</filename>.
2037 If <filename>default.action</filename> has changed since last
2038 release (i.e. software release or standalone actions file release),
2039 bump up its version info to A.B in this line:
2043 {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
2047 Then change the version info in doc/webserver/actions/index.php,
2048 line: '$required_actions_file_version = "A.B";'
2053 If the HTML documentation is not in sync with the SGML sources
2054 you need to regenerate and upload it to the webserver. (If in
2055 doubt, just do it.) See the Section "Updating the webserver" in
2056 this manual for details.
2061 <emphasis>Commit all files that were changed in the above steps!</emphasis>
2066 Tag all files in CVS with the version number with
2067 <quote><command>cvs tag v_X_Y_Z</command></quote>.
2068 Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc.
2073 If the release was in a development branch, increase the point version
2074 from even to odd (X.Y.(Z+1)) again in <filename>configure.in</filename> and
2080 On the webserver, copy the user manual to a new top-level directory
2081 called <filename>X.Y.Z</filename>. This ensures that help links from the CGI
2082 pages, which have the version as a prefix, will go into the right version of the manual.
2083 If this is a development branch release, also symlink <filename>X.Y.(Z-1)</filename>
2084 to <filename>X.Y.Z</filename> and <filename>X.Y.(Z+1)</filename> to
2085 <filename>.</filename> (i.e. dot).
2092 <sect2 id="therelease">
2093 <title>Building and Releasing the Packages</title>
2095 Now the individual packages can be built and released. Note that for
2096 GPL reasons the first package to be released is always the source tarball.
2100 For <emphasis>all</emphasis> types of packages, including the source tarball,
2101 <emphasis>you must make sure that you build from clean sources by exporting
2102 the right version from CVS into an empty directory:</emphasis>.
2107 mkdir dist # delete or choose different name if it already exists
2109 cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
2110 cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
2115 <emphasis>Do NOT change</emphasis> a single bit, including, but not limited to
2116 version information after export from CVS. This is to make sure that
2117 all release packages, and with them, all future bug reports, are based
2118 on exactly the same code.
2122 Please find additional instructions for the source tarball and the
2123 individual platform dependent binary packages below. And details
2124 on the Sourceforge release process below that.
2127 <sect3 id="pack-guidelines">
2128 <title>Note on Privoxy Packaging</title>
2130 Please keep these general guidelines in mind when putting together
2131 your package. These apply to <emphasis>all</emphasis> platforms!
2137 <application>Privoxy</application> <emphasis>requires</emphasis>
2138 write access to: all <filename>*.action</filename> files, all
2139 logfiles, and the <filename>trust</filename> file. You will
2140 need to determine the best way to do this for your platform.
2145 Please include up to date documentation. At a bare minimum:
2149 <filename>LICENSE</filename> (toplevel directory)
2154 <filename>README</filename> (toplevel directory)
2159 <filename>AUTHORS</filename> (toplevel directory)
2164 <filename>man page</filename> (toplevel directory, Unix-like
2170 <filename>The User Manual</filename> (doc/webserver/user-manual/)
2175 <filename>FAQ</filename> (doc/webserver/faq/)
2179 Also suggested: <filename>Developer Manual</filename>
2180 (doc/webserver/devel-manual) and <filename>ChangeLog</filename>
2181 (toplevel directory). <filename>FAQ</filename> and the manuals are
2182 HTML docs. There are also text versions in
2183 <filename>doc/text/</filename> which could conceivably also be
2187 The documentation has been designed such that the manuals are linked
2188 to each other from parallel directories, and should be packaged
2189 that way. <filename>index.html</filename> can also be included and
2190 can serve as a focal point for docs and other links of interest.
2191 This should be one level up from the manuals. There are two
2192 css stylesheets that can be included for better presentation:
2193 <filename>p_doc.css</filename> and <filename>p_web.css</filename>.
2194 These should be in the same directory with
2195 <filename>index.html</filename>, (i.e. one level up from the manual
2201 <filename>user.action</filename> is designed for local preferences.
2202 Make sure this does not get overwritten!
2207 Other configuration files should be installed as the new defaults,
2208 but all previously installed configuration files should be preserved
2209 as backups. This is just good manners :-)
2214 Please check platform specific notes in this doc, if you haven't
2215 done <quote>Privoxy</quote> packaging before for other platform
2216 specific issues. Conversely, please add any notes that you know
2217 are important for your platform (or contact one of the doc
2218 maintainers to do this if you can't).
2227 <sect3 id="newrelease-tarball"><title>Source Tarball</title>
2229 First, <emphasis>make sure that you have freshly exported the right
2230 version into an empty directory</emphasis>. (See "Building and releasing
2231 packages" above). Then run:
2236 autoheader && autoconf && ./configure
2248 To upload the package to Sourceforge, simply issue
2256 Go to the displayed URL and release the file publicly on Sourceforge.
2257 For the change log field, use the relevant section of the
2258 <filename>ChangeLog</filename> file.
2262 <sect3 id="newrelease-rpm"><title>SuSE, Conectiva or Red Hat RPM</title>
2264 In following text, replace <replaceable class="parameter">dist</replaceable>
2265 with either <quote>rh</quote> for Red Hat or <quote>suse</quote> for SuSE.
2268 First, <emphasis>make sure that you have freshly exported the right
2269 version into an empty directory</emphasis>. (See "Building and releasing
2273 As the only exception to not changing anything after export from CVS,
2274 now examine the file <filename>privoxy-</filename><replaceable class="parameter">dist</replaceable><filename>.spec</filename>
2275 and make sure that the version information and the RPM release number are
2276 correct. The RPM release numbers for each version start at one. Hence it must
2277 be reset to one if this is the first RPM for
2278 <replaceable class="parameter">dist</replaceable> which is built from version
2280 <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118">file
2281 list</ulink> if unsure. Else, it must be set to the highest already available RPM
2282 release number for that version plus one.
2290 autoheader && autoconf && ./configure
2298 make <replaceable class="parameter">dist</replaceable>-dist
2302 To upload the package to Sourceforge, simply issue
2306 make <replaceable class="parameter">dist</replaceable>-upload <replaceable class="parameter">rpm_packagerev</replaceable>
2310 where <replaceable class="parameter">rpm_packagerev</replaceable> is the
2311 RPM release number as determined above.
2312 Go to the displayed URL and release the file publicly on Sourceforge.
2313 Use the release notes and change log from the source tarball package.
2317 <sect3 id="newrelease-os2"><title>OS/2</title>
2319 First, <emphasis>make sure that you have freshly exported the right
2320 version into an empty directory</emphasis>. (See "Building and releasing
2321 packages" above). Then get the OS/2 Setup module:
2325 cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co os2setup
2329 You will need a mix of development tools.
2330 The main compilation takes place with IBM Visual Age C++.
2331 Some ancillary work takes place with GNU tools, available from
2332 various sources like hobbes.nmsu.edu.
2333 Specificially, you will need <filename>autoheader</filename>,
2334 <filename>autoconf</filename> and <filename>sh</filename> tools.
2335 The packaging takes place with WarpIN, available from various sources, including
2336 its home page: <ulink url="http://www.xworkplace.org/">xworkplace</ulink>.
2339 Change directory to the <filename>os2setup</filename> directory.
2340 Edit the os2build.cmd file to set the final executable filename.
2345 installExeName='privoxyos2_setup_X.Y.Z.exe'
2349 Next, edit the <filename>IJB.wis</filename> file so the release number matches
2350 in the <filename>PACKAGEID</filename> section:
2354 PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z"
2358 You're now ready to build. Run:
2366 You will find the WarpIN-installable executable in the
2367 <filename>./files</filename> directory. Upload this anonymously to
2368 <filename>uploads.sourceforge.net/incoming</filename>, create a release
2369 for it, and you're done. Use the release notes and Change Log from the
2370 source tarball package.
2374 <sect3 id="newrelease-solaris"><title>Solaris</title>
2376 Login to Sourceforge's compilefarm via ssh:
2380 ssh cf.sourceforge.net
2384 Choose the right operating system (not the Debian one).
2385 When logged in, <emphasis>make sure that you have freshly exported the right
2386 version into an empty directory</emphasis>. (See "Building and releasing
2387 packages" above). Then run:
2392 autoheader && autoconf && ./configure
2404 which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
2405 solaris-upload</command> on the Sourceforge machine (no ncftpput). You now have
2406 to manually upload the archive to Sourceforge's ftp server and release
2407 the file publicly. Use the release notes and Change Log from the
2408 source tarball package.
2412 <sect3 id="newrelease-windows"><title>Windows</title>
2414 You should ensure you have the latest version of Cygwin (from
2415 <ulink url="http://www.cygwin.com/">http://www.cygwin.com/</ulink>).
2416 Run the following commands from within a Cygwin bash shell.
2419 First, <emphasis>make sure that you have freshly exported the right
2420 version into an empty directory</emphasis>. (See "Building and releasing
2421 packages" above). Then get the Windows setup module:
2425 cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co winsetup
2429 Then you can build the package. This is fully automated, and is
2430 controlled by <filename>winsetup/GNUmakefile</filename>.
2431 All you need to do is:
2440 Now you can manually rename <filename>privoxy_setup.exe</filename> to
2441 <filename>privoxy_setup_X_Y_Z.exe</filename>, and upload it to
2442 SourceForge. When releasing the package on SourceForge, use the release notes
2443 and Change Log from the source tarball package.
2447 <sect3 id="newrelease-debian"><title>Debian</title>
2449 First, <emphasis>make sure that you have freshly exported the
2450 right version into an empty directory</emphasis>. (See
2451 "Building and releasing packages" above). Then add a log
2452 entry to <filename>debian/changelog</filename>, if it is not
2453 already there, for example by running:
2457 debchange -v &p-version;-&p-status;-1 "New upstream version"
2461 After this simply run
2465 dpkg-buildpackage -rfakeroot -us -uc -b
2470 <filename>../privoxy_&p-version;-&p-status;-1_i386.deb</filename>
2471 which can be uploaded.
2482 To upload the package to Sourceforge, simply issue
2491 <sect3 id="newrelease-macosx"><title>Mac OSX</title>
2493 First, <emphasis>make sure that you have freshly exported the right
2494 version into an empty directory</emphasis>. (See "Building and releasing
2495 packages" above). Then get the Mac OSX setup module:
2499 cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co osxsetup
2512 This will run <filename>autoheader</filename>, <filename>autoconf</filename> and
2513 <filename>configure</filename> as well as <filename>make</filename>.
2514 Finally, it will copy over the necessary files to the ./osxsetup/files directory
2515 for further processing by <filename>PackageMaker</filename>.
2518 Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package
2519 name to match the release, and hit the "Create package" button.
2520 If you specify ./Privoxy.pkg as the output package name, you can then create
2521 the distributable zip file with the command:
2525 zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg
2529 You can then upload <filename>privoxyosx_setup_x.y.z.zip</filename> anonymously to
2530 <filename>uploads.sourceforge.net/incoming</filename>,
2531 create a release for it, and you're done. Use the release notes
2532 and Change Log from the source tarball package.
2536 <sect3 id="newrelease-freebsd"><title>FreeBSD</title>
2538 Login to Sourceforge's compilefarm via ssh:
2542 ssh cf.sourceforge.net
2546 Choose the right operating system.
2547 When logged in, <emphasis>make sure that you have freshly exported the right
2548 version into an empty directory</emphasis>. (See "Building and releasing
2549 packages" above). Then run:
2554 autoheader && autoconf && ./configure
2566 which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
2567 freebsd-upload</command> on the Sourceforge machine (no ncftpput). You now have
2568 to manually upload the archive to Sourceforge's ftp server and release
2569 the file publicly. Use the release notes and Change Log from the
2570 source tarball package.
2574 <sect3 id="newrelease-hpux"><title>HP-UX 11</title>
2576 First, <emphasis>make sure that you have freshly exported the right
2577 version into an empty directory</emphasis>. (See "Building and releasing
2578 packages" above). Then run:
2583 autoheader && autoconf && ./configure
2591 <sect3 id="newrelease-amiga"><title>Amiga OS</title>
2593 First, <emphasis>make sure that you have freshly exported the right
2594 version into an empty directory</emphasis>. (See "Building and releasing
2595 packages" above). Then run:
2600 autoheader && autoconf && ./configure
2608 <sect3 id="newrelease-aix"><title>AIX</title>
2610 Login to Sourceforge's compilefarm via ssh:
2614 ssh cf.sourceforge.net
2618 Choose the right operating system.
2619 When logged in, <emphasis>make sure that you have freshly exported the right
2620 version into an empty directory</emphasis>. (See "Building and releasing
2621 packages" above). Then run:
2626 autoheader && autoconf && ./configure
2638 which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
2639 aix-upload</command> on the Sourceforge machine (no ncftpput). You now have
2640 to manually upload the archive to Sourceforge's ftp server and release
2641 the file publicly. Use the release notes and Change Log from the
2642 source tarball package.
2647 <sect2 id="releasing">
2648 <title>Uploading and Releasing Your Package</title>
2650 After the package is ready, it is time to upload it
2651 to SourceForge, and go through the release steps. The upload
2658 Upload to: <ulink url="ftp://upload.sourceforge.net/incoming">ftp://upload.sourceforge.net/incoming</ulink>
2663 user: <literal>anonymous</literal>
2668 password: <literal>ijbswa-developers@lists.sourceforge.net</literal>
2674 Or use the <command>make</command> targets as described above.
2677 Once this done go to <ulink url="http://sourceforge.net/project/admin/editpackages.php?group_id=11118">http://sourceforge.net/project/admin/editpackages.php?group_id=11118</ulink>,
2678 making sure you are logged in. Find your target platform in the
2679 second column, and click <literal>Add Release</literal>. You will
2680 then need to create a new release for your package, using the format
2681 of <literal>$VERSION ($CODE_STATUS)</literal>, e.g. <emphasis>&p-version;
2685 Now just follow the prompts. Be sure to add any appropriate Release
2686 notes. You should see your freshly uploaded packages in
2687 <quote>Step 2. Add Files To This Release</quote>. Check the
2688 appropriate box(es). Remember at each step to hit the
2689 <quote>Refresh/Submit</quote> buttons! You should now see your
2690 file(s) listed in Step 3. Fill out the forms with the appropriate
2691 information for your platform, being sure to hit <quote>Update</quote>
2692 for each file. If anyone is monitoring your platform, check the
2693 <quote>email</quote> box at the very bottom to notify them of
2694 the new package. This should do it!
2697 If you have made errors, or need to make changes, you can go through
2698 essentially the same steps, but select <literal>Edit Release</literal>,
2699 instead of <literal>Add Release</literal>.
2703 <sect2 id="afterrelease">
2704 <title>After the Release</title>
2706 When all (or: most of the) packages have been uploaded and made available,
2707 send an email to the <ulink url="mailto:ijbswa-announce@lists.sourceforge.net">announce
2708 mailing list</ulink>, Subject: "Version X.Y.Z available for download". Be sure to
2710 <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118">download
2711 location</ulink>, the release notes and the change log.
2717 <!-- ~~~~~ New section ~~~~~ -->
2718 <sect1 id="webserver-update"><title>Update the Webserver</title>
2720 When updating the webserver, please follow these steps to make
2721 sure that no broken links, incosistent contents or permission
2722 problems will occur:
2725 If you have changed anything in the documentation source SGML files,
2730 make dok # (or make redkat-dok if make dok doesn't work for you)
2734 That will generate <filename>doc/webserver/user-manual</filename>,
2735 <filename>doc/webserver/developer-manual</filename>,
2736 <filename>doc/webserver/faq</filename> and
2737 <filename>doc/webserver/index.html</filename> automatically.
2740 If you changed the manual page source, generate
2741 <filename>doc/webserver/man-page/privoxy-man-page.html</filename>
2742 by running <quote><command>make man</command></quote>. (This is
2743 a separate target due to dependencies on some obscure perl scripts.
2744 See comments in <filename>GNUmakefile</filename>.)
2747 If you want to add new files to the webserver, create them locally in
2748 the <filename>doc/webserver/*</filename> directory (or
2749 create new directories under <filename>doc/webserver</filename>).
2752 Next, commit any changes from the above steps to CVS. All set? Then do
2760 This will do the upload to <ulink url="http://www.privoxy.org/">the
2761 webserver</ulink> (www.privoxy.org) and ensure all files and directories
2762 there are group writable.
2765 Please do <emphasis>NOT</emphasis> use any other means of transferring
2766 files to the webserver to avoid permission problems.
2770 <!-- ~~~~~ New section ~~~~~ -->
2771 <sect1 id="contact"><title>Contacting the developers, Bug Reporting and Feature Requests</title>
2772 <!-- Include contacting.sgml -->
2774 <!-- end contacting -->
2778 <!-- ~~~~~~~~ New section Header ~~~~~~~~~ -->
2779 <sect1 id="copyright"><title>Privoxy Copyright, License and History</title>
2781 <!-- Include copyright.sgml -->
2785 <!-- ~~~~~ New section ~~~~~ -->
2786 <sect2><title>License</title>
2787 <!-- Include copyright.sgml: -->
2789 <!-- end copyright -->
2791 <!-- ~ End section ~ -->
2793 <!-- ~~~~~ New section ~~~~~ -->
2794 <sect2><title>History</title>
2795 <!-- Include history.sgml -->
2802 <!-- ~~~~~ New section ~~~~~ -->
2803 <sect1 id="seealso"><title>See also</title>
2804 <!-- Include seealso.sgml -->
2812 This program is free software; you can redistribute it
2813 and/or modify it under the terms of the GNU General
2814 Public License as published by the Free Software
2815 Foundation; either version 2 of the License, or (at
2816 your option) any later version.
2818 This program is distributed in the hope that it will
2819 be useful, but WITHOUT ANY WARRANTY; without even the
2820 implied warranty of MERCHANTABILITY or FITNESS FOR A
2821 PARTICULAR PURPOSE. See the GNU General Public
2822 License for more details.
2824 The GNU General Public License should be included with
2825 this file. If not, you can view it at
2826 http://www.gnu.org/copyleft/gpl.html
2827 or write to the Free Software Foundation, Inc., 59
2828 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
2830 $Log: developer-manual.sgml,v $
2831 Revision 1.47 2002/05/26 04:55:11 mal0rd
2832 Added debian-dist and debian-upload targets. Also documented usage.
2834 Revision 1.46 2002/05/22 17:15:00 oes
2837 Revision 1.45 2002/05/19 23:01:54 hal9
2838 Add small section on general packaging guidelines (e.g. actions files must
2841 Revision 1.44 2002/05/15 03:55:17 hal9
2842 Fix ulink -> link, and minor modification to release process section for
2845 Revision 1.43 2002/05/10 01:48:19 hal9
2846 This is mostly proposed copyright/licensing additions and changes. Docs
2847 are still GPL, but licensing and copyright are more visible. Also, copyright
2848 changed in doc header comments (eliminate references to JB except FAQ).
2850 Revision 1.42 2002/05/05 20:26:02 hal9
2851 Sorting out license vs copyright in these docs.
2853 Revision 1.41 2002/05/04 08:44:44 swa
2856 Revision 1.40 2002/05/04 00:43:43 hal9
2857 -Remove TOC/first page kludge with proper stylesheet fix.
2858 -Combined the two very brief sections: Intro and Quickstart.
2860 Revision 1.39 2002/05/02 15:08:25 oes
2861 Added explanation about version numbers and RPM package revisions
2863 Revision 1.38 2002/04/29 02:20:31 hal9
2864 Add info on steps for uploading and the release process on SF.
2866 Revision 1.37 2002/04/26 17:23:29 swa
2867 bookmarks cleaned, changed structure of user manual, screen and programlisting cleanups, and numerous other changes that I forgot
2869 Revision 1.36 2002/04/26 05:25:23 hal9
2870 Mass commit to catch a few scattered fixes.
2872 Revision 1.35 2002/04/17 15:16:15 oes
2873 Added link to docbook crash course
2875 Revision 1.34 2002/04/15 23:39:32 oes
2876 - Extended & fixed the release section
2877 - Added CVS guideline sections
2878 - Separated webserver section from release section
2879 - Commented out boilerplate inclusion (If you don't know yet what it is,
2880 you shouldn't mess with its code ;-)
2883 Revision 1.33 2002/04/12 03:49:53 hal9
2884 Spell checked. Clarification on where docs are kept.
2886 Revision 1.32 2002/04/11 21:29:58 jongfoster
2887 Documenting Win32 release procedure
2889 Revision 1.31 2002/04/11 09:32:52 oes
2892 Revision 1.30 2002/04/11 09:24:53 oes
2895 Revision 1.29 2002/04/10 18:45:14 swa
2898 Revision 1.28 2002/04/08 22:59:26 hal9
2899 Version update. Spell chkconfig correctly :)
2901 Revision 1.27 2002/04/08 15:31:18 hal9
2902 Touch ups to documentation section.
2904 Revision 1.26 2002/04/07 23:50:08 hal9
2905 Documentation changes to reflect HTML docs now in CVS, and new generated files
2908 Revision 1.25 2002/04/06 05:07:28 hal9
2909 -Add privoxy-man-page.sgml, for man page.
2910 -Add authors.sgml for AUTHORS (and p-authors.sgml)
2911 -Reworked various aspects of various docs.
2912 -Added additional comments to sub-docs.
2914 Revision 1.24 2002/04/04 21:33:37 hal9
2915 More on documenting the documents.
2917 Revision 1.23 2002/04/04 18:46:47 swa
2918 consistent look. reuse of copyright, history et. al.
2920 Revision 1.22 2002/04/04 17:27:56 swa
2921 more single file to be included at multiple points. make maintaining easier
2923 Revision 1.21 2002/04/04 06:48:37 hal9
2924 Structural changes to allow for conditional inclusion/exclusion of content
2925 based on entity toggles, e.g. 'entity % p-not-stable "INCLUDE"'. And
2926 definition of internal entities, e.g. 'entity p-version "2.9.13"' that will
2927 eventually be set by Makefile.
2928 More boilerplate text for use across multiple docs.
2930 Revision 1.20 2002/04/04 03:28:27 david__schmidt
2933 Revision 1.19 2002/04/03 15:09:42 david__schmidt
2934 Add OS/2 build section
2936 Revision 1.18 2002/04/03 03:51:48 hal9
2939 Revision 1.17 2002/04/03 01:21:17 hal9
2940 Implementing Andreas's suggestions for Release sections.
2942 Revision 1.16 2002/03/31 23:04:40 hal9
2943 Fleshed out the doc section, and added something for an intro so it was not
2946 Revision 1.15 2002/03/30 22:29:47 swa
2949 Revision 1.14 2002/03/30 19:04:08 swa
2950 people release differently. no good.
2951 I want to make parts of the docs only.
2953 Revision 1.13 2002/03/27 01:16:41 hal9
2956 Revision 1.12 2002/03/27 01:02:51 hal9
2957 Touch up on name change...
2959 Revision 1.11 2002/03/26 22:29:55 swa
2960 we have a new homepage!
2962 Revision 1.10 2002/03/24 12:33:01 swa
2965 Revision 1.9 2002/03/24 11:01:05 swa
2968 Revision 1.8 2002/03/23 15:13:11 swa
2969 renamed every reference to the old name with foobar.
2970 fixed "application foobar application" tag, fixed
2971 "the foobar" with "foobar". left junkbustser in cvs
2972 comments and remarks to history untouched.
2974 Revision 1.7 2002/03/11 13:13:27 swa
2975 correct feedback channels
2977 Revision 1.6 2002/02/24 14:25:06 jongfoster
2978 Formatting changes. Now changing the doctype to DocBook XML 4.1
2979 will work - no other changes are needed.
2981 Revision 1.5 2001/10/31 18:16:51 swa
2982 documentation added: howto generate docs in text and html
2983 format, howto move stuff to the webserver.
2985 Revision 1.4 2001/09/23 10:13:48 swa
2986 upload process established. run make webserver and
2987 the documentation is moved to the webserver. documents
2988 are now linked correctly.
2990 Revision 1.3 2001/09/13 15:27:40 swa
2993 Revision 1.2 2001/09/13 15:20:17 swa
2994 merged standards into developer manual
2996 Revision 1.1 2001/09/12 15:36:41 swa
2997 source files for junkbuster documentation
2999 Revision 1.3 2001/09/10 17:43:59 swa
3000 first proposal of a structure.
3002 Revision 1.2 2001/06/13 14:28:31 swa
3003 docs should have an author.
3005 Revision 1.1 2001/06/13 14:20:37 swa
3006 first import of project's documentation for the webserver.