+++ /dev/null
-# Access Control List for the Internet Junkbuster 2.0
-#
-# Copyright 1997-8 Junkbusters Corp. For distribution, modification and use
-# under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or README file for details.
-#
-# Access controls are included at the request of some ISPs and systems
-# administrators, and are not usually needed by individual users.
-# Please note the warnings in the FAQ that this proxy is not
-# intended to be a substitute for a firewall or to encourage anyone
-# to defer addressing basic security weaknesses.
-# For details see http://www.junkbusters.com/ht/en/ijbman.html#aclfile
-
-# For this file to have any effect, the line beginning "aclfile"
-# must be commented in, with the name of this file following the word "aclfile"
-
-# If no access file is specified, the proxy talks to anyone that connects.
-# If an access file is specified, the proxy talks only to IP addresses
-# permitted somewhere in this file and not denied later in this file.
-#
-# Summary -- if using an ACL:
-#
-# Client must have permission to receive service
-# LAST match in ACL file wins
-# Default behavior is to deny service
-#
-# Syntax for an entry in an Access Control List is:
-#
-# ACTION SRC_ADDR[/SRC_MASKLEN] [ DST_ADDR[/DST_MASKLEN] ]
-#
-# where the fields are
-#
-# ACTION = "permit" | "deny"
-#
-# SRC_ADDR = client hostname or dotted IP address
-# SRC_MASKLEN = number of bits in the subnet mask for the source
-#
-# DST_ADDR = server or forwarder hostname or dotted IP address
-# DST_MASKLEN = number of bits in the subnet mask for the target
-#
-# field separator (FS) is whitespace (space or tab)
-#
-# IMPORTANT NOTE
-# ==============
-# If the junkbuster is using a forwarder or a gateway for a particular
-# destination URL, the DST_ADDRR that is examined is the address of
-# the forwarder or the gateway and NOT the address of the ultimate target.
-# This is necessary because it may be impossible for the local
-# junkbuster to determine the address of the ultimate target
-# (that's often what gateways are used for).
-#
-# Here are a few examples to show how the ACL works:
-
-# localhost is OK -- no DST_ADDR implies that ALL destination addresses are OK
-# permit localhost
-
-# a silly example to illustrate:
-#
-# permit any host on the class-C subnet with junkbusters to go anywhere
-#
-# permit www.junkbusters.com/24
-#
-# except deny one particular IP address from using it at all
-#
-# deny ident.junkbusters.com
-
-# another example
-#
-# You can specify an explicit network address and subnet mask.
-# Explicit addresses do not have to be resolved to be used.
-#
-# permit 207.153.200.0/24
-
-# a subnet mask of 0 matches anything, so the next line permits everyone.
-#
-# permit 0.0.0.0/0
-
-# Note: you cannot say
-#
-# permit .org
-#
-# to allow all .org domains; every IP-address listed must resolve fully.
-
-# An ISP may want to provide a junkbuster that is accessible by "the world"
-# and yet restrict use of some of their private content to hosts on its
-# internal network (i.e. its own subscribers). Say, for instance the
-# ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask).
-# This is how they could do it:
-
-# permit 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
-# with the following exceptions:
-#
-# deny 0.0.0.0/0 123.124.0.0/16 # block all external requests for
-# sites on the ISP's network
-#
-# permit 0.0.0.0/0 www.my_isp.com # except for the ISP's main web site
-#
-# permit 123.124.0.0/16 0.0.0.0/0 # the ISP's clients can go anywhere
-
-# Note that some hostnames may be listed with multiple IP addresses;
-# the primary value returned by gethostbyname() is used.
-#
# Sample Configuration file for the Internet Junkbuster 2.0
#
-# $Id: config,v 1.12 2001/06/04 10:44:57 swa Exp $
+# $Id: config,v 1.13 2001/06/04 18:31:58 swa Exp $
#
# Table of Contents
#
#jarfile jarfile
-#
-# The forwardfile defines domain-specific forwarding of HTTP
-# requests. In some cases, you may want Junkbuster to forward your
-# request to another proxy instead of trying to fetch the request
-# itself. In those cases, you can use the forwardfile to indicate
-# which requests should be forwarded and to where.
-#
-# Default: Make all connections directly.
-#
-forwardfile forward
-
-#
-# Generally, Junkbuster is used as a personal proxy. The default
-# behaviour of Junkbuster is to listen on port 8000 on the "loopback"
-# interface, so that it will only listen to local requests from the
-# same machine. Using 'listen-address' (see below) you can serve
-# requests from other machines as well.
-#
-# In that case, it is a wise thing to define access control lists
-# (acls), which state who can connect to your proxy and what service
-# they will be given. Note that setting the listen-address to an IP
-# address that is only internally reachable from your local network
-# might already do the trick.
-#
-# Default: No access control. Everybody that can reach junkbuster
-# will be served.
-#
-#aclfile aclfile
#
# 4. OPTIONS
#
toggle 1
+
+#############################################################################
+# Access Control List
+#############################################################################
+#
+# Access controls are included at the request of some ISPs and systems
+# administrators, and are not usually needed by individual users.
+# Please note the warnings in the FAQ that this proxy is not
+# intended to be a substitute for a firewall or to encourage anyone
+# to defer addressing basic security weaknesses.
+# For details see the documentation
+#
+# If no access settings are specified, the proxy talks to anyone that
+# connects. If any access settings file are specified, then the proxy
+# talks only to IP addresses permitted somewhere in this file and not
+# denied later in this file.
+#
+# Summary -- if using an ACL:
+#
+# Client must have permission to receive service
+# LAST match in ACL wins
+# Default behavior is to deny service
+#
+# Syntax for an entry in the Access Control List is:
+#
+# ACTION SRC_ADDR[/SRC_MASKLEN] [ DST_ADDR[/DST_MASKLEN] ]
+#
+# where the fields are
+#
+# ACTION = "permit-access" | "deny-access"
+#
+# SRC_ADDR = client hostname or dotted IP address
+# SRC_MASKLEN = number of bits in the subnet mask for the source
+#
+# DST_ADDR = server or forwarder hostname or dotted IP address
+# DST_MASKLEN = number of bits in the subnet mask for the target
+#
+# field separator (FS) is whitespace (space or tab)
+#
+# IMPORTANT NOTE
+# ==============
+# If the junkbuster is using a forwarder or a gateway for a particular
+# destination URL, the DST_ADDRR that is examined is the address of
+# the forwarder or the gateway and NOT the address of the ultimate target.
+# This is necessary because it may be impossible for the local
+# junkbuster to determine the address of the ultimate target
+# (that's often what gateways are used for).
+#
+# Here are a few examples to show how the ACL works:
+#
+# localhost is OK -- no DST_ADDR implies that ALL destination addresses are OK
+# permit-access localhost
+#
+# a silly example to illustrate:
+#
+# permit any host on the class-C subnet with junkbusters to go anywhere
+#
+# permit-access www.junkbusters.com/24
+#
+# except deny one particular IP address from using it at all
+#
+# deny-access ident.junkbusters.com
+#
+# another example
+#
+# You can specify an explicit network address and subnet mask.
+# Explicit addresses do not have to be resolved to be used.
+#
+# permit-access 207.153.200.0/24
+#
+# a subnet mask of 0 matches anything, so the next line permits everyone.
+#
+# permit-access 0.0.0.0/0
+#
+# Note: you cannot say
+#
+# permit-access .org
+#
+# to allow all .org domains; every IP-address listed must resolve fully.
+#
+# An ISP may want to provide a junkbuster that is accessible by "the world"
+# and yet restrict use of some of their private content to hosts on its
+# internal network (i.e. its own subscribers). Say, for instance the
+# ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask).
+# This is how they could do it:
+#
+# permit-access 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
+# # with the following exceptions:
+#
+# deny-access 0.0.0.0/0 123.124.0.0/16 # block all external requests for
+# # sites on the ISP's network
+#
+# permit 0.0.0.0/0 www.my_isp.com # except for the ISP's main web site
#
+# permit 123.124.0.0/16 0.0.0.0/0 # the ISP's clients can go anywhere
+#
+# Note that some hostnames may be listed with multiple IP addresses;
+# the primary value returned by gethostbyname() is used.
+#
+# Default: Anyone can access the proxy.
+
+
+#############################################################################
+# Forwarding
+#############################################################################
+#
+#
+# This feature allows routing of HTTP requests via multiple proxies.
+# It can be used to better protect privacy and confidentiality when
+# accessing specific domains by routing requests to those domains
+# to a special purpose filtering proxy such as lpwa.com
+#
+# It can also be used in an environment with multiple networks to route
+# requests via multiple gateways allowing transparent access to multiple
+# networks without having to modify browser configurations.
+#
+# Also specified here are SOCKS proxies. We support SOCKS 4 and SOCKS 4A.
+# The difference is that SOCKS 4A will resolve the target hostname using
+# DNS on the SOCKS server, not our local DNS client.
+#
+# The syntax of each line is
+#
+# forward target_domain[:port] http_proxy_host[:port]
+# forward-socks4 target_domain[:port] socks_proxy_host[:port] http_proxy_host[:port]
+# forward-socks4a target_domain[:port] socks_proxy_host[:port] http_proxy_host[:port]
+#
+# If http_proxy_host is ".", then requests are not forwarded to
+# a HTTP proxy but are made directly to the web servers.
+#
+# Lines are checked in turn, and the last match wins.
+#
+# There is an implicit line equivalent to the following, which specifies that
+# anything not finding a match on the list is to go out without forwarding
+# or gateway protocol; like so:
+# forward .* . # implicit
+#
+# In the following common configuration, everything goes to Lucent's LPWA,
+# except SSL on port 443 (which it doesn't handle)
+# forward .* lpwa.com:8000
+# forward :443 .
+#
+# See the FAQ for instructions on how to automate the login procedure for LPWA.
+# Some users have reported difficulties related to LPWA's use of . as the
+# last element of the domain, and have said that this can be fixed with this:
+# forward lpwa. lpwa.com:8000
+# (NOTE: the syntax for specifiying target_domain has changed since the
+# previous paragraph weas written - it will not work now. More information
+# is welcome.)
+#
+# In this fictitious example, everything goes via an ISP's caching proxy,
+# except requests to that ISP:
+#
+# forward .* caching.myisp.net:8000
+# forward myisp.net .
+#
+# For the @home network, we're told the forwarding configuration is this:
+# forward .* proxy:8080
+# Also, we're told they insist on getting cookies and Javascript, so you need
+# to add home.com to the cookie file. We consider Javascript a security risk;
+# see our page on cookies. Java need not be enabled.
+#
+# In this example direct connections are made to all "internal" domains,
+# but everything else goes through Lucent's LPWA by way of the company's
+# SOCKS gateway to the Internet.
+#
+# forward_socks4 .* lpwa.com:8000 firewall.my_company.com:1080
+# forward my_company.com .
+#
+# This is how you could set up a site that always uses SOCKS but no forwarders
+#
+# forward_socks4a .* . firewall.my_company.com:1080
+#
+# An advanced example for network administrators:
+#
+# If you have links to multiple ISPs that provide various special content to
+# their subscribers, you can configure forwarding to pass requests to the
+# specific host that's connected to that ISP so that everybody can see all
+# of the content on all of the ISPs.
+#
+# This is tricky, but here's a sample:
+#
+# host-a has a PPP connection to isp-a.com
+# host-b has a PPP connection to isp-b.com
+#
+# host-a can run an Internet Junkbuster proxy with forwarding like this:
+# forward .* .
+# forward isp-b.com host-b:8000
+#
+# host-b can run an Internet Junkbuster proxy with forwarding like this:
+# forward .* .
+# forward isp-a.com host-a:8000
+#
+# Now, *anyone* on the Internet (including users on host-a and host-b)
+# can set their browser's proxy to *either* host-a or host-b and
+# be able to browse the content on isp-a or isp-b.
+#
+#
+# Here's another practical example, for University of Kent at
+# Canterbury students with a network connection in their room, who
+# need to use the University's Squid web cache.
+#
+# forward *. ssbcache.ukc.ac.uk:3128 # Use the proxy, except for:
+# forward .ukc.ac.uk . # Anything on the same domain as us
+# forward * . # Host with no domain specified
+# forward 129.12.*.* . # A dotted IP on our /16 network.
+# forward 128.*.*.* . # Loopback address
+# forward localhost.localdomain . # Loopback address
+# forward www.ukc.mirror.ac.uk . # Specific host
+#
+
+
+#############################################################################
# 5. WINDOWS GUI OPTIONS
+#############################################################################
#
# Junkbuster has a number of options specific to the Windows GUI
# interface:
#
#Win32-only: close-button-minimizes 1
+
+#
+# This option is specific to the Win32 console version of JunkBuster:
+#
# hide-console
#
# If this option is used, Junkbuster will disconnect from and hide
#
#Win32-only: #hide-console
+
# Note: Junkbuster is distributed under the GNU General Public License (GPL)
# For details, see http://www.gnu.org/copyleft/gpl.html
+++ /dev/null
-# Forwarding specification for Internet Junkbuster 2.0
-#
-# Copyright 1997-8 Junkbusters Corp. For distribution, modification and use
-# under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or README file for details.
-
-# For this file to have any effect, the line beginning "forwardfile" must
-# be commented in, with the name of this file following the word "forwardfile"
-
-#
-# This feature allows routing of HTTP requests via multiple proxies.
-# It can be used to better protect privacy and confidentiality when
-# accessing specific domains by routing requests to those domains
-# to a special purpose filtering proxy such as lpwa.com
-#
-# It can also be used in an environment with multiple networks to route
-# requests via multiple gateways allowing transparent access to multiple
-# networks without having to modify browser configurations.
-#
-# Also specified here are special gateway protocols such as SOCKS.
-
-# The syntax of each line is
-#
-# target_domain[:port][/path] forwarding_domain[:port] gateway_type gateway_domain[:port]
-#
-
-# A '.' in the forwarding domain/port means that requests made to the
-# target domain are not forwarded but are made directly by the proxy
-# (though the proxy may still use a gateway to contact the server)
-#
-# Lines are checked in turn, and the last match wins.
-#
-# There is an implicit line equivalent to the following, which specifies that
-# anything not finding a match on the list is to go out without forwarding
-# or gateway protocol; like so:
-#
-# * . . . # implicit
-
-# In the following common configuration, everything goes to Lucent's LPWA,
-# except SSL on port 443 (which it doesn't handle)
-# * lpwa.com:8000 . .
-# :443 . . .
-
-# See the FAQ for instructions on how to automate the login procedure for LPWA.
-# Some users have reported difficulties related to LPWA's use of . as the
-# last element of the domain, and have said that this can be fixed with this:
-# lpwa. lpwa.com:8000 . .
-
-# In this fictitious example, everything goes via an ISP's caching proxy,
-# except requests to that ISP:
-#
-# * caching.myisp.net:8000 . .
-# myisp.net . . .
-
-# For the @home network, we're told the forwarding configuration is this:
-# * proxy:8080 . .
-# Also, we're told they insist on getting cookies and Javascript, so you need
-# to add home.com to the cookie file. We consider Javascript a security risk;
-# see our page on cookies. Java need not be enabled.
-
-# In this example direct connections are made to all "internal" domains,
-# but everything else goes through Lucent's LPWA by way of the company's
-# SOCKS gateway to the Internet.
-#
-# * lpwa.com:8000 socks argyle.my_company.com:1080
-# my_company.com . . .
-
-# This is how you could set up a site that always uses SOCKS but no forwarders
-#
-# * . socks knee.my_company.com:1080
-
-# An advanced example for network administrators.
-#
-# If you have links to multiple ISPs that provide various special
-#content to their subscribers, you can configure forwarding to pass
-# requests to the specific host that's connected to that ISP
-# so that everybody can see
-# all of the content on all of the ISPs.
-#
-# This is tricky, but here's a sample:
-#
-# host-a has a PPP connection to isp-a.com
-# host-b has a PPP connection to isp-b.com
-
-# host-a can run an Internet Junkbuster proxy with forwarding like this:
-#
-# / . . .
-# isp-b.com host-b:8000 . .
-#
-# host-b can run an Internet Junkbuster proxy with forwarding like this:
-# / . . .
-# isp-a.com host-a:8000 . .
-#
-# Now, *anyone* on the Internet (including users on host-a and host-b)
-# can set their browser's proxy to *either* host-a or host-b and
-# be able to browse the content on isp-a or isp-b.
-