From: Fabian Keil Date: Fri, 17 Apr 2009 13:27:06 +0000 (+0000) Subject: Regenerated with the IPv6 changes. X-Git-Tag: v_3_0_13~114 X-Git-Url: http://www.privoxy.org/gitweb/introduction.html?a=commitdiff_plain;h=c84204c65022a7323e321339715fc0eaea9494b3;p=privoxy.git Regenerated with the IPv6 changes. --- diff --git a/config b/config index c182f42a..e0ea87a4 100644 --- a/config +++ b/config @@ -1,6 +1,6 @@ -# Sample Configuration File for Privoxy v3.0.12 +# Sample Configuration File for Privoxy v3.0.13 # -# $Id: config,v 1.76 2009/03/21 11:51:51 fabiankeil Exp $ +# $Id: p-config.sgml,v 2.48 2009/04/17 11:42:07 fabiankeil Exp $ # # Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/ # @@ -576,9 +576,9 @@ logfile logfile # use multiple debug lines. # # A debug level of 1 is informative because it will show you each -# request as it happens. 1, 4096 and 8192 are recommended so that -# you will notice when things go wrong. The other levels are -# probably only of interest if you are hunting down a specific +# request as it happens. 1, 1024, 4096 and 8192 are recommended +# so that you will notice when things go wrong. The other levels +# are probably only of interest if you are hunting down a specific # problem. They can produce a hell of an output (especially 16). # # Privoxy used to ship with the debug levels recommended above @@ -695,9 +695,9 @@ logfile logfile # # Effect if unset: # -# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and -# recommended for home users who run Privoxy on the same machine -# as their browser. +# Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is suitable +# and recommended for home users who run Privoxy on the same +# machine as their browser. # # Notes: # @@ -708,10 +708,15 @@ logfile logfile # if you want to serve requests from other machines (e.g. on your # local network) as well, you will need to override the default. # -# If you leave out the IP address, Privoxy will bind to all +# IPv6 addresses containing colons have to be quoted by brackets. +# +# If you leave out the IP address, Privoxy will bind to all IPv4 # interfaces (addresses) on your machine and may become reachable # from the Internet. In that case, consider using access control -# lists (ACL's, see below), and/or a firewall. +# lists (ACL's, see below), and/or a firewall. If the hostname +# is localhost, Privoxy will explicitly try to bind to an IPv4 +# address. For other hostnames it depends on the operating system +# which IP version will be used. # # If you open Privoxy to untrusted users, you will also # want to make sure that the following actions are disabled: @@ -727,6 +732,12 @@ logfile logfile # listen-address 192.168.0.1:8118 # # +# Suppose you are running Privoxy on an IPv6-capable machine and +# you want it to listen on the IPv6 address of the loopback device: +# +# listen-address [::1]:8118 +# +# listen-address 127.0.0.1:8118 # # @@ -942,18 +953,28 @@ enforce-blocks 0 # # Type of value: # -# src_addr[/src_masklen] [dst_addr[/dst_masklen]] +# src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]] +# +# Where src_addr and dst_addr are IPv4 addresses in dotted +# decimal notation or valid DNS names, port is a port number, and +# src_masklen and dst_masklen are subnet masks in CIDR notation, +# i.e. integer values from 2 to 30 representing the length +# (in bits) of the network address. The masks and the whole +# destination part are optional. # -# Where src_addr and dst_addr are IP addresses in dotted decimal -# notation or valid DNS names, and src_masklen and dst_masklen are -# subnet masks in CIDR notation, i.e. integer values from 2 to 30 -# representing the length (in bits) of the network address. The -# masks and the whole destination part are optional. +# If your system implements RFC 3493, then src_addr and dst_addr +# can be IPv6 addresses delimeted by brackets, port can be a +# number or a service name, and src_masklen and dst_masklen can +# be a number from 0 to 128. # # Default value: # # Unset # +# If no port is specified, any port will match. If no src_masklen +# or src_masklen is given, the complete IP address has to match +# (i.e. 32 bits for IPv4 and 128 bits for IPv6). +# # Effect if unset: # # Don't restrict access further than implied by listen-address @@ -989,6 +1010,12 @@ enforce-blocks 0 # names. If a DNS name resolves to multiple IP addresses, only # the first one is used. # +# Some systems allows IPv4 client to connect to IPv6 server +# socket. Then the client's IPv4 address will be translated by +# system into IPv6 address space with special prefix ::ffff:0:0/96 +# (so called IPv4 mapped IPv6 address). Privoxy can handle it +# and maps such ACL addresses automatically. +# # Denying access to particular sites by ACL may have undesired # side effects if the site in question is hosted on a machine # which also hosts other sites (most sites are). @@ -1016,6 +1043,16 @@ enforce-blocks 0 # permit-access 192.168.45.64/26 # deny-access 192.168.45.73 www.dirty-stuff.example.com # +# Allow access from the IPv4 network 192.0.2.0/24 even if listening +# on an IPv6 wild card address (not supported on all platforms): +# +# permit-access 192.0.2.0/24 +# +# +# This is equivalent to the following line even if listening on +# an IPv4 address (not supported on all platforms): +# +# permit-access [::ffff:192.0.2.0]/120 # # # 4.8. buffer-limit @@ -1093,7 +1130,7 @@ buffer-limit 4096 # to denote "all URLs". http_parent[:port] is the DNS name or # IP address of the parent HTTP proxy through which the requests # should be forwarded, optionally followed by its listening port -# (default: 8080). Use a single dot (.) to denote "no forwarding". +# (default: 8000). Use a single dot (.) to denote "no forwarding". # # Default value: # @@ -1108,6 +1145,13 @@ buffer-limit 4096 # If http_parent is ".", then requests are not forwarded to # another HTTP proxy but are made directly to the web servers. # +# http_parent can be a numerical IPv6 address (if RFC 3493 is +# implemented). To prevent clashes with the port delimiter, +# the whole IP address has to be put into brackets. On the other +# hand a target_pattern containing an IPv6 address has to be put +# into angle brackets (normal brackets are reserved for regular +# expressions already). +# # Multiple lines are OK, they are checked in sequence, and the # last match wins. # @@ -1127,6 +1171,16 @@ buffer-limit 4096 # forward .isp.example.net . # # +# Parent proxy specified by an IPv6 address: +# +# foward / [2001:DB8::1]:8000 +# +# +# Suppose your parent proxy doesn't support IPv6: +# +# forward / parent-proxy.example.org:8000 +# forward ipv6-server.example.org . +# forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> . # # # 5.2. forward-socks4, forward-socks4a and forward-socks5 @@ -1169,6 +1223,13 @@ buffer-limit 4096 # With forward-socks5 the DNS resolution will happen on the remote # server as well. # +# socks_proxy and http_parent can be a numerical IPv6 address +# (if RFC 3493 is implemented). To prevent clashes with the port +# delimiter, the whole IP address has to be put into brackets. On +# the other hand a target_pattern containing an IPv6 address has +# to be put into angle brackets (normal brackets are reserved +# for regular expressions already). +# # If http_parent is ".", then requests are not forwarded to another # HTTP proxy but are made (HTTP-wise) directly to the web servers, # albeit through a SOCKS proxy.