1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.109 2002/05/28 09:16:15 oes Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
48 #############################################################################
50 #############################################################################
52 DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src
53 DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre
54 DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
56 #############################################################################
57 # Directories for "make install"
58 #############################################################################
61 CONFDEST = @prefix@@sysconfdir@
62 SBIN_DEST = @prefix@@sbindir@
63 MAN_DEST = @prefix@@mandir@
64 DOK_WEB_USEM = doc/webserver/user-manual
66 #############################################################################
68 #############################################################################
70 PROGRAM = privoxy@EXEEXT@
75 INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
76 INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
77 INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
90 # Note: Please make sure that -d ldp.dsl\#html stays the last option to
91 # $(JADEBIN), because for some targets "-notoc" will be appended
92 # to it (--> "ldp.dsl\#html-notoc").
93 DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
95 G2H_CMD = groff -mandoc -Thtml
99 DOC_TMP = $(DOC_DIR)/tmp
106 # Program to do LF->CRLF
108 # The sed version should be the most portable, but it doesn't work for me,
109 # the other two do. FIXME.
111 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
112 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
113 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
115 #############################################################################
116 # Setup for make distribution rh and suse for now
117 #############################################################################
119 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
120 RPM_BASE = @RPM_BASE@
122 #############################################################################
123 # We include these files in our distributions
124 #############################################################################
125 # take care that no CVS .cvsignore or other crappy files
127 # and escape every '#' in the find. doh.
128 CONFIG_FILES = config trust \
130 basic.action intermediate.action advanced.action \
132 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
134 DOC_FILES = AUTHORS LICENSE README ChangeLog \
135 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
136 `find doc/webserver/ -name "*.html"` \
137 `find doc/webserver/ -name "*.css"` \
140 #############################################################################
141 # Filenames and libraries
142 #############################################################################
145 $(DIR_PRIVOXY_SRC)/actions.c \
146 $(DIR_PRIVOXY_SRC)/cgi.c \
147 $(DIR_PRIVOXY_SRC)/cgiedit.c \
148 $(DIR_PRIVOXY_SRC)/cgisimple.c \
149 $(DIR_PRIVOXY_SRC)/deanimate.c \
150 $(DIR_PRIVOXY_SRC)/encode.c \
151 $(DIR_PRIVOXY_SRC)/errlog.c \
152 $(DIR_PRIVOXY_SRC)/filters.c \
153 $(DIR_PRIVOXY_SRC)/gateway.c \
154 $(DIR_PRIVOXY_SRC)/jbsockets.c \
155 $(DIR_PRIVOXY_SRC)/jcc.c \
156 $(DIR_PRIVOXY_SRC)/killpopup.c \
157 $(DIR_PRIVOXY_SRC)/list.c \
158 $(DIR_PRIVOXY_SRC)/loadcfg.c \
159 $(DIR_PRIVOXY_SRC)/loaders.c \
160 $(DIR_PRIVOXY_SRC)/miscutil.c \
161 $(DIR_PRIVOXY_SRC)/parsers.c \
162 $(DIR_PRIVOXY_SRC)/ssplit.c \
163 $(DIR_PRIVOXY_SRC)/urlmatch.c
165 C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
166 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
168 W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c
169 W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res
170 W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES)
171 W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h
172 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
173 W32_INIS = @WIN_ONLY@config.txt trust.txt
175 PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c
176 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
177 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
179 PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c
180 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
181 PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
183 # No REGEX (maybe because dynamically linked pcreposix):
185 @STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c
187 REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=%.@OBJEXT@)
188 REGEX_HDRS = $(REGEX_SRC:.c=.h)
190 # Dependencies introduced by #include "project.h".
191 PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h
193 # Socket libraries for platforms that need them explicitly defined
194 SOCKET_LIB = @SOCKET_LIB@
196 # PThreads library, if needed.
197 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
199 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
200 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
201 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
202 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
205 #############################################################################
207 #############################################################################
209 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
210 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
212 # The flag "-pthread" is required if using Pthreads under Linux (and
213 # possibly other OSs).
214 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
216 # Add your flags here
219 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
220 @STATIC_PCRE_ONLY@ -Ipcre
222 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
225 #############################################################################
228 # There should NOT be any targets above this line.
229 #############################################################################
233 #############################################################################
235 #############################################################################
236 .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
237 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
238 install conectiva-spec conectiva-dist conectiva-upload debian-dist \
239 debian-upload ensure-wdump ensure-jadebin ensure-dkprefix
242 #############################################################################
244 #############################################################################
245 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ)
246 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
248 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ)
249 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
254 #############################################################################
256 #############################################################################
258 inifiles: $(W32_INIS)
261 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
262 -e 's!\jarfile jarfile!jarfile jar.log!' \
263 -e 's!\logfile logfile!logfile privoxy.log!' \
264 -e 's!#Win32-only: !!' \
267 # LF to CRLF in default.action
268 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
269 # LF to CRLF in default.filter
270 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
273 $(DOSFILTER) < $< > $@
275 re_filterfile.txt: re_filterfile
276 $(DOSFILTER) < $< > $@
279 #############################################################################
281 #############################################################################
283 @if [ -d CVS ]; then \
284 $(ECHO) "***************************************************"; \
286 $(ECHO) "*** WARNING ***"; \
288 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
289 $(ECHO) "*** that you are trying to build a distribution ***"; \
290 $(ECHO) "*** package based on a checked out, not an ***"; \
291 $(ECHO) "*** exported copy of the source tree. Please ***"; \
292 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
293 $(ECHO) "*** developer manual. ***"; \
295 $(ECHO) "***************************************************"; \
296 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
297 $(ECHO) -n "really want to proceed: "; \
299 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
303 #############################################################################
304 # RPM specifice stuff (SuSE or Redhat, ..)
305 #############################################################################
306 rpm-stuff: dist-check clean clobber
307 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
308 if [ ! -w $(RPM_BASE)/$$dir ]; then \
309 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
310 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
311 $(ECHO) "%_topdir /home/foo/rpm-build"; \
317 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
319 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
320 echo " No value given for RPM_PACKAGEV. Please use:"; \
321 echo " make dist-upload RPM_PACKAGEV=release"; \
322 echo " where \"release\" is the release number you want to and"; \
323 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
325 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
327 echo "ATTENTION: If your distribution use a specific tag on the"; \
328 echo " release field (like \"cl\" for Conectiva, and"; \
329 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
330 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
331 echo " Do it like you would do for a redhat package,"; \
332 echo " (i.e. just the number)."; \
338 #############################################################################
339 # Create Conectiva specfile from RedHat specfile
340 #############################################################################
342 $(RM) privoxy-cl.spec
343 chmod a+x genclspec.sh
346 #############################################################################
347 # Conectiva distribution for x86
348 #############################################################################
349 conectiva-dist: rpm-stuff conectiva-spec
351 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
352 $(RPM) --clean -ta $(TAR_ARCH)
353 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
355 conectiva-upload: check-release
356 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
358 #############################################################################
359 # redhat distribution alpha and x86
360 #############################################################################
361 redhat-dist: rpm-stuff
363 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
364 $(RPM) --clean -ta $(TAR_ARCH)
365 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
367 # anonymously ncftps the rpms to sourceforge
368 redhat-upload: check-release
369 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
370 # better should use `arch` here instead of ix86 to support other platforms too
371 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
372 @$(ECHO) -------------------------------------------------------
374 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
375 @$(ECHO) ... and release the files.
376 @$(ECHO) -------------------------------------------------------
377 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
379 #############################################################################
380 # suse distribution. works fine. no need to be root.
381 #############################################################################
383 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
384 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
385 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
386 # privoxy-suse.spec > $$TMPFILE ; then \
387 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
389 # $(ECHO) "Could not set version info in specfile."; \
393 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
394 $(RPM) --clean -ta $(TAR_ARCH)
395 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
397 # anonymously ncftps the rpms to sourceforge
398 suse-upload: check-release
399 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
400 # better should use `arch` here instead of ix86 to support other platforms too
401 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
402 @$(ECHO) -------------------------------------------------------
404 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
405 @$(ECHO) ... and release the files.
406 @$(ECHO) -------------------------------------------------------
408 # handle with care. use with root.
410 $(RPM) -e junkbuster-suse || true
411 $(RM) -r /etc/junkbuster
412 $(RM) -r /etc/rc.d/junkbuster*
413 $(RM) -r /var/run/junkbuster.pid
414 $(RM) -r /var/log/junkbuster
415 $(RM) /etc/init.d/junkbuster
416 $(RM) /usr/sbin/junkbuster
417 $(RM) /usr/sbin/rcjunkbuster
418 $(RM) /usr/share/man/man1/junkbuster.1.gz
419 $(RPM) -e privoxy-suse || true
420 $(RM) -r /etc/privoxy
421 $(RM) -r /etc/rc.d/privoxy*
422 $(RM) -r /var/run/privoxy.pid
423 $(RM) -r /var/log/privoxy
424 $(RM) /etc/init.d/privoxy
425 $(RM) /usr/sbin/privoxy
426 $(RM) /usr/sbin/rcprivoxy
427 $(RM) /usr/share/man/man1/privoxy.1.gz
429 #############################################################################
430 # generic distribution
431 #############################################################################
434 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
437 $(STRIP_PROG) $(PROGRAM)
438 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
440 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
442 for foo in $(CONFIG_FILES); do \
443 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
446 for foo in $(DOC_FILES); do \
447 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
449 # and zip the archive
450 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
451 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
452 @$(ECHO) Distribution with binary created.
454 # anonymously ncftps the package to sourceforge
456 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
457 @$(ECHO) -------------------------------------------------------
459 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
460 @$(ECHO) ... and release the files.
461 @$(ECHO) -------------------------------------------------------
465 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
467 #############################################################################
468 # solaris distribution. verified on SF machines by swa.
469 #############################################################################
470 solaris-dist: gen-dist
472 # anonymously ncftps the package to sourceforge
473 solaris-upload: gen-upload
476 solaris-clean: gen-clean
479 #############################################################################
481 #############################################################################
483 @$(ECHO) coming soon.
485 @$(ECHO) coming soon.
487 #############################################################################
488 # debian distribution
489 #############################################################################
491 @$(ECHO) Creating Debian package. Will exist in parent directory.
492 dpkg-buildpackage -rfakeroot -us -uc
494 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb
495 @$(ECHO) -------------------------------------------------------
497 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
498 @$(ECHO) ... and release the files.
499 @$(ECHO) -------------------------------------------------------
502 #############################################################################
503 # macosx distribution
504 #############################################################################
506 @$(ECHO) coming soon.
508 @$(ECHO) coming soon.
510 #############################################################################
512 #############################################################################
514 @$(ECHO) coming soon.
516 @$(ECHO) coming soon.
518 #############################################################################
519 # freebsd distribution. verified on SF machines by swa.
520 #############################################################################
521 freebsd-dist: gen-dist
523 # anonymously ncftps the package to sourceforge
524 freebsd-upload: gen-upload
527 freebsd-clean: gen-clean
530 #############################################################################
531 # Windows distribution
532 #############################################################################
534 @$(ECHO) RTFM. You shouldn't run configure before making
535 @$(ECHO) the Windows release, so you need to start again from
536 @$(ECHO) a clean CVS export.
540 #############################################################################
541 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
542 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
543 #############################################################################
545 tarball-dist: dist-check clean clobber
546 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
548 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
549 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
550 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
552 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
554 # and zip the archive
555 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
556 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
557 @$(ECHO) Tarball distribution created.
559 # anonymously ncftps the tarball to sourceforge
561 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
562 @$(ECHO) -------------------------------------------------------
564 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
565 @$(ECHO) ... and release the files.
566 @$(ECHO) -------------------------------------------------------
569 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
571 #############################################################################
575 # converts doc/source/*.sgml into html, text and man pages
577 #############################################################################
579 # 3 checks to make sure docs will be generated
583 @$(ECHO) "Cannot build docs; one of w3m, links, or lynx must be installed."
584 @$(ECHO) "You should install the appropriate package and rerun ./configure"
589 ifeq (@JADEBIN@,false)
591 @$(ECHO) "Cannot build docs; one of openjade or jade must be installed"
592 @$(ECHO) "You should install the appropriate package and rerun ./configure"
597 ifeq (@DKPREFIX@,false)
599 @$(ECHO) "Cannot build docs; cannot find docbook-dsssl stylesheets"
600 @$(ECHO) "You should install the appropriate package and rerun ./configure"
605 dok-devel: ensure-dkprefix ensure-jadebin ensure-wdump
606 $(RM) doc/webserver/developer-manual/*.html
607 $(RM) -r doc/source/developer-manual
608 mkdir -p doc/text doc/source/developer-manual
609 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
610 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
613 dok-user: ensure-dkprefix ensure-jadebin ensure-wdump
614 $(RM) doc/webserver/user-manual/*.html
615 $(RM) -r doc/source/user-manual/
616 mkdir -p doc/text doc/source/user-manual
617 cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
618 cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
621 dok-faq: ensure-dkprefix ensure-jadebin ensure-wdump
622 $(RM) doc/webserver/faq/*.html
623 $(RM) -r doc/source/faq
624 mkdir -p doc/text doc/source/faq
625 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
626 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
630 $(RM) doc/man/* doc/webserver/man-page/*.html
631 ifneq ($(MAN2HTML),false)
632 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
633 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
634 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
640 dok-readme: ensure-dkprefix ensure-jadebin ensure-wdump
641 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
642 $(WDUMP) tmp.html > ../../README && $(RM) -r tmp.html
644 # index.sgml is used to create both the Home Page, and a local index
645 # for documentation, etc.
647 # index.html for webserver:
649 cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
650 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
651 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
652 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
654 doc/webserver/index.html && $(RM) doc/webserver/*.bak
656 # privoxy-index.html for local documentation:
658 cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
659 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
660 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
661 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
663 doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
665 # Main documentation target.
666 dok: dok-devel dok-release dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
667 @$(ECHO) Documentation created.
670 # an alternative to the above dok. disabled man page creation for the moment
672 redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
673 @$(ECHO) Documentation created.
675 # For those with man2html ala RH7's.
677 mkdir -p doc/webserver/man-page
678 ifneq ($(MAN2HTML),false)
679 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
680 $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
681 $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
682 # Get rid of spurious
\a from conversion. (How to do this with perl?)
683 $(SED) -e 's/
\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
688 # Otherwise we get plain groff conversion.
690 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
693 redhat-readme: ensure-dkprefix ensure-jadebin ensure-wdump
694 cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \
695 tmp.html > ../../README && $(RM) -r tmp.html
698 dok-authors: ensure-dkprefix ensure-jadebin ensure-wdump
699 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
700 tmp.html > ../../AUTHORS && $(RM) tmp.html
702 # make a man page, and then (lousy) HTML version.
703 # Requires docbook2man (short perl script), see comments
704 # in privoxy-man-page.sgml. This target is not invoked from other dok targets.
705 # It is built separately due to dependencies on perl scripts.
707 mkdir -p doc/source/man
708 cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
709 perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1
710 cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\
711 mv -f index.html privoxy-man-page.html
712 # This html is not used. See make man2html.
713 mv -f doc/source/man/privoxy.1 privoxy.1
716 # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
717 # exceptions accordingly. This needs to go before any doc building (doh).
719 @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
720 @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
721 s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
722 doc/source/*sgml doc/source/*/*sgml
723 $(RM) -r doc/source/*bak doc/source/*/*bak
724 ifeq ($(CODE_STATUS),stable)
725 @$(ECHO) Setting docs to stable $(VERSION)
726 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
727 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
728 doc/source/*sgml doc/source/*/*sgml
729 $(RM) -r doc/source/*bak doc/source/*/*bak
731 @$(ECHO) Setting docs to not stable $(VERSION)
732 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
733 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
734 doc/source/*sgml doc/source/*/*sgml
735 $(RM) -r doc/source/*bak doc/source/*/*bak
740 cp -f doc/source/*.sgml doc/pdf
741 cp -f doc/source/*.dsl doc/pdf
742 cd doc/pdf && db2pdf --pdf -s ldp.dsl user-manual.sgml && mv user-manual.pdf privoxy-user-manual.pdf > /dev/null 2>&1
743 cd doc/pdf && db2pdf --pdf -s ldp.dsl developer-manual.sgml && mv developer-manual.pdf privoxy-developer-manual.pdf > /dev/null 2>&1
744 cd doc/pdf && db2pdf --pdf -s ldp.dsl faq.sgml && mv faq.pdf privoxy-faq.pdf > /dev/null 2>&1
745 $(RM) doc/pdf/*.sgml doc/pdf/*.dsl doc/pdf/*.out doc/pdf/*.tex doc/pdf/*.log doc/pdf/*.aux
747 # the layout and style with db2pdf sucks, here is an alternative
748 dok-pdf2: dok-release
749 mkdir -p doc/source/temp # this directory not in cvs
750 cd doc/source && $(DB) -V nochunks user-manual.sgml > temp/privoxy-user-manual.html
751 cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html
752 cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html
753 # one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output.
755 # Create release announcement in text and html, with short and long versions.
756 # This is a standalone target, and must be invoked directly.
757 announce: dok-release
759 cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
760 mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
761 cd $(DOC_TMP) && $(DB) announce.sgml &&\
762 mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
763 mv -f *html *txt ../../..
766 #############################################################################
770 # moves dokumentation to webserver
772 #############################################################################
774 @$(ECHO) -------------------------------------------------------
775 @$(ECHO) You have run make dok/redhat-dok before, right?
776 @$(ECHO) Note that this command scps all stuff to the webserver,
777 @$(ECHO) it will not remove obsolete documents.
778 @$(ECHO) -------------------------------------------------------
782 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
783 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
785 @$(ECHO) Fixing permissions
786 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
787 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
788 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
793 @cd doc/webserver/actions; \
794 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
795 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
797 @$(ECHO) Fixing permissions
798 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
799 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
801 #############################################################################
802 # Source file dependencies
803 #############################################################################
805 $(DIR_PRIVOXY_OBJ)/actions.@OBJEXT@: $(DIR_PRIVOXY_SRC)/actions.c $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/actionlist.h
806 $(DIR_PRIVOXY_OBJ)/cgi.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgi.c $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
807 $(DIR_PRIVOXY_OBJ)/cgiedit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgiedit.c $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
808 $(DIR_PRIVOXY_OBJ)/cgisimple.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgisimple.c $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
809 $(DIR_PRIVOXY_OBJ)/deanimate.@OBJEXT@: $(DIR_PRIVOXY_SRC)/deanimate.c $(DIR_PRIVOXY_SRC)/deanimate.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS)
810 $(DIR_PRIVOXY_OBJ)/encode.@OBJEXT@: $(DIR_PRIVOXY_SRC)/encode.c $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/config.h
811 $(DIR_PRIVOXY_OBJ)/errlog.@OBJEXT@: $(DIR_PRIVOXY_SRC)/errlog.c $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h
812 $(DIR_PRIVOXY_OBJ)/filters.@OBJEXT@: $(DIR_PRIVOXY_SRC)/filters.c $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/deanimate.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/win32.h
813 $(DIR_PRIVOXY_OBJ)/gateway.@OBJEXT@: $(DIR_PRIVOXY_SRC)/gateway.c $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
814 $(DIR_PRIVOXY_OBJ)/jbsockets.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jbsockets.c $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/filters.h
815 $(DIR_PRIVOXY_OBJ)/jcc.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jcc.c $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/cgi.h
816 $(DIR_PRIVOXY_OBJ)/killpopup.@OBJEXT@: $(DIR_PRIVOXY_SRC)/killpopup.c $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
817 $(DIR_PRIVOXY_OBJ)/list.@OBJEXT@: $(DIR_PRIVOXY_SRC)/list.c $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/miscutil.h
818 $(DIR_PRIVOXY_OBJ)/loadcfg.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loadcfg.c $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h
819 $(DIR_PRIVOXY_OBJ)/loaders.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loaders.c $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h
820 $(DIR_PRIVOXY_OBJ)/miscutil.@OBJEXT@: $(DIR_PRIVOXY_SRC)/miscutil.c $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/config.h
821 $(DIR_PRIVOXY_OBJ)/parsers.@OBJEXT@: $(DIR_PRIVOXY_SRC)/parsers.c $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
822 $(DIR_PRIVOXY_OBJ)/ssplit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/ssplit.c $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/miscutil.h
823 $(DIR_PRIVOXY_OBJ)/urlmatch.@OBJEXT@: $(DIR_PRIVOXY_SRC)/urlmatch.c $(DIR_PRIVOXY_SRC)/urlmatch.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
826 $(DIR_PRIVOXY_OBJ)/pcrs.@OBJEXT@: $(DIR_PRIVOXY_SRC)/pcrs.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC)/pcrs.h
829 $(DIR_PRIVOXY_OBJ)/get.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
830 $(DIR_PRIVOXY_OBJ)/maketables.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
831 $(DIR_PRIVOXY_OBJ)/pcre.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcre.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c
832 $(DIR_PRIVOXY_OBJ)/pcreposix.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
833 $(DIR_PRIVOXY_OBJ)/study.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
835 # An auxiliary program makes the PCRE default character table source
837 $(DIR_PRIVOXY_SRC_PCRE)/chartables.c: $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@
838 $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ >$(DIR_PRIVOXY_SRC_PCRE)/chartables.c
840 $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@: $(DIR_PRIVOXY_SRC_PCRE)/dftables.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/config.h
841 $(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
844 $(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
845 $(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
846 $(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h win32.h
848 $(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
849 $(DIR_PRIVOXY_SRC)/w32res.h \
850 $(DIR_PRIVOXY_SRC)/config.h \
851 $(DIR_PRIVOXY_SRC)/icons/ico00001.ico \
852 $(DIR_PRIVOXY_SRC)/icons/ico00002.ico \
853 $(DIR_PRIVOXY_SRC)/icons/ico00003.ico \
854 $(DIR_PRIVOXY_SRC)/icons/ico00004.ico \
855 $(DIR_PRIVOXY_SRC)/icons/ico00005.ico \
856 $(DIR_PRIVOXY_SRC)/icons/ico00006.ico \
857 $(DIR_PRIVOXY_SRC)/icons/ico00007.ico \
858 $(DIR_PRIVOXY_SRC)/icons/ico00008.ico \
859 $(DIR_PRIVOXY_SRC)/icons/idle.ico \
860 $(DIR_PRIVOXY_SRC)/icons/privoxy.ico
861 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
864 @AMIGAOS_ONLY@OBJS += $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@
865 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
866 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
867 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
868 $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@: $(DIR_PRIVOXY_SRC)/amiga.c $(DIR_PRIVOXY_SRC)/amiga.h $(DIR_PRIVOXY_SRC)/config.h
871 $(PROGRAM): $(OBJS) $(W32_FILES)
872 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
875 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags`
878 $(RM) `find . -name "*~"`
879 # $(RM) `find . -name "#*#"` # what is this for??
880 $(RM) `find . -name ".\#*"`
883 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
884 privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl
887 # FIXME: What is all this?
889 $(RM) cscope.* *.pdb *.lib *.exp
893 tags: $(SRCS) $(HDRS)
894 etags $(SRCS) $(HDRS)
898 # FIXME: This is a dirty hack to have an install target
899 # that works at least for some setups. This needs
902 $(STRIP_PROG) $(PROGRAM)
903 $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
904 $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
905 $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
906 $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
907 $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
908 if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
909 $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
910 $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
911 # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
912 # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
913 $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
916 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
917 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
918 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
919 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
920 193,51,228,11,1,0,0);'|zcat
922 #############################################################################
928 # $Log: GNUmakefile.in,v $
929 # Revision 1.109 2002/05/28 09:16:15 oes
930 # Added comment for -notoc kludge
932 # Revision 1.108 2002/05/28 03:56:08 hal9
933 # make dok-index target for privoxy-index.html. Fix *bak dead soldiers in
936 # Revision 1.107 2002/05/27 23:26:33 mal0rd
937 # Made doc-generation configuration automatic.
938 # References to DB2HTML were removed, not used.
939 # --with-docbook now only needed if in odd path.
941 # Revision 1.106 2002/05/26 04:55:11 mal0rd
942 # Added debian-dist and debian-upload targets. Also documented usage.
944 # Revision 1.105 2002/05/25 22:48:19 hal9
945 # Add -notoc to README build (per oes's dsl magic).
947 # Revision 1.104 2002/05/24 00:03:49 oes
948 # Use p_doc.css for the Homepage for consistency
950 # Revision 1.103 2002/05/23 23:19:00 oes
951 # Use dsl without TOC for the homepage
953 # Revision 1.102 2002/05/16 01:20:17 hal9
954 # make announce target added.
956 # Revision 1.101 2002/05/15 12:28:46 oes
957 # Trying to keep Hal happy :)
959 # Revision 1.100 2002/05/08 13:48:18 hal9
960 # Ooops, that trashed JB v2.0.2 comment. Fixed.
962 # Revision 1.99 2002/05/08 13:42:07 hal9
963 # This fixes the numbering problem on index.html in contact info section (.1.). Using
964 # perl, since its way too convoluted to try to fix proper with docbook.
966 # Revision 1.98 2002/05/03 14:33:06 oes
967 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
969 # Revision 1.97 2002/04/27 20:27:43 swa
970 # no longer needed due to new
971 # PACKAGE_VERSION process
973 # Revision 1.96 2002/04/27 17:44:32 morcego
974 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
975 # - Using the RM macro everywhere rm is called (either we use, or don't)
978 # Revision 1.95 2002/04/27 15:37:25 swa
979 # replacing directory in document creation process
980 # no longer necessary.
982 # Revision 1.94 2002/04/27 08:23:29 swa
983 # pdf process reviewed and cleaned up
985 # Revision 1.93 2002/04/27 04:55:53 morcego
986 # privoxy-cl.spec now gets removed by clobber target
988 # Revision 1.92 2002/04/27 04:53:40 morcego
989 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
992 # Revision 1.91 2002/04/27 04:44:51 morcego
993 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
994 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
995 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
997 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
998 # for Conectiva Linux
1000 # Revision 1.90 2002/04/26 17:46:53 swa
1003 # Revision 1.89 2002/04/26 17:20:54 swa
1004 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1006 # Revision 1.88 2002/04/25 19:13:57 morcego
1007 # Removed RPM release number declaration on configure.in
1008 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1009 # targets (will produce an error, explaining who to do it, if no value
1012 # Revision 1.87 2002/04/23 14:10:59 swa
1013 # now create pdf documents
1015 # Revision 1.86 2002/04/15 04:30:27 hal9
1016 # Missed two -pi.bak's on perl/cygwin problem.
1018 # Revision 1.85 2002/04/14 01:05:34 hal9
1019 # Revert dok-webserver change for SF logo.
1021 # Revision 1.84 2002/04/13 22:43:25 hal9
1022 # -Fix dok-webserver for SF logo (more perl).
1023 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1025 # Revision 1.83 2002/04/12 09:39:25 oes
1026 # Excluding yet more files from tarball; making dist warning yet more scary
1028 # Revision 1.82 2002/04/11 21:07:11 oes
1029 # Excluding more files from tarball build
1031 # Revision 1.81 2002/04/11 14:40:27 oes
1032 # Fixed typo -- Thanks, Moritz!
1034 # Revision 1.80 2002/04/11 12:50:00 oes
1035 # Fixed tarball-dist target
1037 # Revision 1.79 2002/04/11 06:49:28 oes
1038 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1040 # Revision 1.78 2002/04/09 13:37:11 sarantis
1041 # fix tar options typo
1043 # Revision 1.77 2002/04/09 13:28:53 swa
1044 # build suse and gen-dist with html docs
1046 # Revision 1.76 2002/04/08 22:43:41 oes
1047 # Fix: Include dotfiles in fixing webserver permissions
1049 # Revision 1.75 2002/04/08 22:14:59 oes
1050 # Silencing tar warnings in the web* targets
1052 # Revision 1.74 2002/04/08 15:22:44 hal9
1053 # This has finishing touches for dok building. Should be ready to go.
1054 # -The main doc build is now 'make dok', should work on Redhat too.
1055 # -Removed man page from main doc build. It is built separately due to
1056 # perl scripts that most aren't likely to have.
1058 # Revision 1.73 2002/04/08 14:03:24 oes
1059 # oes for al: Fix install target
1061 # Revision 1.72 2002/04/08 13:42:11 oes
1062 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1064 # Revision 1.71 2002/04/07 20:32:03 hal9
1065 # -Add meta data kludge for make dok-webserver via $(PERL).
1066 # -Add subdirs for 'make dok-release'.
1068 # Revision 1.70 2002/04/07 08:59:40 swa
1069 # generated files. do NOT edit.
1070 # fixed directory bug in makefile.
1072 # Revision 1.69 2002/04/07 08:10:47 swa
1073 # create some of the webserver docs
1074 # automatically (in particular if
1075 # those docs recycle other documentation
1076 # fragments). Now committed webserver's
1079 # Revision 1.68 2002/04/07 07:58:11 swa
1080 # create some of the webserver docs
1081 # automatically (in particular if
1082 # those docs recycle other documentation
1085 # Revision 1.67 2002/04/07 05:31:42 hal9
1086 # Add 'dok-release' target:
1087 # -Set doc entities to VERSION and CODE_STATUS during make.
1088 # -Set doc conditional content flags (stable vs non-stable).
1089 # A separate target for the time being but needs to be incorporated into
1090 # dok build at some point.
1091 # -Filter out a spurious ^G from new man page > html converion in man2html.
1093 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1094 # Prettifying groff2html.
1095 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1096 # (The shell "if"s were hiding errors)
1097 # "perl" -> "$(PERL)"
1098 # Spaces->tabs in a couple of places.
1100 # Revision 1.65 2002/04/06 05:16:39 hal9
1101 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1102 # -Both of these will soon be generated files.
1104 # Revision 1.64 2002/04/04 22:14:51 oes
1105 # No longer rely on find honoring -iname
1107 # Revision 1.63 2002/04/04 21:06:22 swa
1110 # Revision 1.62 2002/04/04 20:49:50 swa
1111 # attempt to consolidate the
1112 # different dokbook versions.
1114 # Revision 1.61 2002/04/04 19:18:21 swa
1115 # readme was leftover directory. use w3m instead
1116 # of lynx to be consistent among developers. use
1117 # consistent target naming.
1119 # Revision 1.60 2002/04/04 12:25:41 oes
1120 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1122 # Revision 1.59 2002/04/04 08:32:45 swa
1123 # wrong name for tarball-dist target. further fixed content of tarball dist
1125 # Revision 1.58 2002/04/04 06:32:58 hal9
1126 # New dok targets for make readme.
1128 # Revision 1.57 2002/04/04 00:36:36 gliptak
1129 # always use pcre for matching
1131 # Revision 1.56 2002/04/03 22:28:03 gliptak
1132 # Removed references to gnu_regex
1134 # Revision 1.55 2002/04/03 19:54:29 swa
1135 # freebsd tested to work. attempt to move tarball dist target forward
1137 # Revision 1.54 2002/04/03 14:54:07 oes
1138 # Standard clean and clobber semantics II
1140 # Revision 1.53 2002/04/03 14:19:16 oes
1141 # Standard clean and clobber semantics
1143 # Revision 1.52 2002/04/03 02:56:18 hal9
1144 # Revert previous FAQ numbering kludge.
1146 # Revision 1.51 2002/04/02 13:03:56 oes
1147 # Added fix for webserver permissions
1149 # Revision 1.50 2002/04/02 03:46:24 hal9
1150 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1151 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1153 # Revision 1.49 2002/03/30 22:20:12 swa
1154 # cd didn't work. neither did find.
1156 # Revision 1.48 2002/03/30 19:04:06 swa
1157 # people release differently. no good.
1158 # I want to make parts of the docs only.
1160 # Revision 1.47 2002/03/30 09:05:21 swa
1161 # better packaging. better rpm building.
1162 # tar failed on sun (no exclude there).
1164 # Revision 1.46 2002/03/29 20:09:01 swa
1167 # Revision 1.45 2002/03/29 19:45:45 swa
1170 # Revision 1.44 2002/03/29 17:42:44 gliptak
1171 # Correcting for Solaris tar limitations
1173 # Revision 1.43 2002/03/29 07:40:03 swa
1174 # fixed make webserver. doh
1176 # Revision 1.42 2002/03/29 06:59:04 swa
1177 # other users could not modify files on webserver
1179 # Revision 1.41 2002/03/28 20:43:00 swa
1180 # set make correctly
1182 # Revision 1.40 2002/03/28 04:22:44 hal9
1183 # More on man2html stuff.
1185 # Revision 1.39 2002/03/28 01:04:14 hal9
1186 # More man2html stuff for docs.
1188 # Revision 1.38 2002/03/27 16:02:30 swa
1189 # have a generic target
1191 # Revision 1.37 2002/03/27 15:30:26 swa
1192 # have a consistent appearance
1194 # Revision 1.36 2002/03/27 14:58:08 swa
1195 # can be used by mutilple targets
1197 # Revision 1.35 2002/03/27 14:53:19 swa
1198 # added solaris-dist
1200 # Revision 1.34 2002/03/27 10:30:11 swa
1201 # we want a html man file on the webserver
1203 # Revision 1.33 2002/03/27 03:05:35 hal9
1204 # Added man2html target for docs (redhat-dok only for now)
1206 # Revision 1.32 2002/03/26 22:29:54 swa
1207 # we have a new homepage!
1209 # Revision 1.31 2002/03/26 14:00:18 swa
1210 # fixed make tarball, tarball-dist, tarball-clean
1212 # Revision 1.30 2002/03/25 12:52:25 swa
1215 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1218 # Revision 1.28 2002/03/24 16:19:48 swa
1219 # configure needs to be generated.
1221 # Revision 1.27 2002/03/24 16:13:57 swa
1222 # generated files are a nono in cvs
1224 # Revision 1.26 2002/03/24 15:36:02 swa
1227 # Revision 1.25 2002/03/24 14:31:08 swa
1228 # remove more crappy files. set RPM
1229 # release version correctly.
1231 # Revision 1.24 2002/03/24 14:19:55 swa
1232 # set rpm package release in configure.in. nowhere else.
1234 # Revision 1.23 2002/03/24 13:06:49 swa
1235 # suse-clean now runs fine
1237 # Revision 1.22 2002/03/24 12:56:21 swa
1238 # name change related issues.
1240 # Revision 1.21 2002/03/24 12:43:57 swa
1243 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1244 # Renaming config files
1246 # Revision 1.19 2002/03/22 20:53:03 morcego
1247 # - Ongoing process to change name to JunkbusterNG
1248 # - configure/configure.in: no change needed
1250 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1251 # - PROGRAM = jbng@EXEEXT@
1252 # - rh-spec now references as junkbusterng-rh.spec
1253 # - redhat-upload: references changed to junkbusterng-* (package names)
1254 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1255 # - tarball-src: now JunkbusterNG-*
1256 # - install: initscript now junkbusterng.init and junkbusterng (when
1258 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1259 # - junkbusterng.spec:
1260 # - References to the expression ijb where changed where possible
1261 # - New package name: junkbusterng (all in lower case, acording to
1262 # the LSB recomendation)
1263 # - Version changed to: 2.9.13
1265 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1266 # right. If it obsoletes, why conflict ? Have to check it later)
1267 # - Summary changed: Stefan, please check and aprove it
1268 # - Changes description to use the new name
1269 # - Sed string was NOT changed. Have to wait to the manpage to
1271 # - Keeping the user junkbuster for now. It will require some aditional
1272 # changes on the script (scheduled for the next specfile release)
1273 # - Added post entry to move the old logfile to the new log directory
1274 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1275 # added to the startup list).
1276 # - Added preun section to stop the service with the old name, as well
1277 # as remove it from the startup list
1278 # - Removed the chkconfig --del entry from the conditional block on
1279 # the preun scriptlet (now handled on the %files section)
1280 # - junkbuster.init: renamed to junkbusterng.init
1281 # - junkbusterng.init:
1282 # - Changed JB_BIN to jbng
1283 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1284 # be used where necessary (config dir)
1287 # - The config directory is /etc/junkbuster yet. Have to change it on the
1288 # specfile, after it is changes on the code
1289 # - The only files that got renamed on the cvs tree were the rh specfile and
1290 # the init file. Some file references got changes on the makefile and on the
1291 # rh-spec (as listed above)
1293 # Revision 1.18 2002/03/21 23:00:00 swa
1294 # want to autogenerate stuff.
1296 # Revision 1.17 2002/03/19 19:30:04 morcego
1297 # - Fixing stylesheet checking on configure. If it is found, no further checks
1300 # - configure will now check for db2html or docbook2html (should work now
1301 # on SuSe without the docbktls package)
1303 # Revision 1.16 2002/03/14 22:32:32 hal9
1304 # Bumped the RPM version.
1306 # Revision 1.15 2002/03/08 20:00:28 swa
1309 # Revision 1.14 2002/03/07 18:25:56 swa
1310 # synced redhat and suse build process
1312 # Revision 1.13 2002/03/07 17:17:56 oes
1313 # (Hopefully) fixed for older make versions
1315 # Revision 1.12 2002/03/07 15:28:27 swa
1318 # Revision 1.11 2002/03/06 14:33:18 sarantis
1319 # Use proper temp file, not "abc".
1321 # Revision 1.10 2002/03/06 14:19:35 sarantis
1322 # Cleanup PID_FILE_PATH from redhat-dist target
1324 # Revision 1.9 2002/03/05 17:31:11 morcego
1325 # Search for docbook.dsl. Should solve portability problems for SuSe.
1327 # Revision 1.8 2002/03/05 14:07:42 morcego
1328 # configure now detects rpm topdir, and change GNUmakefile acordingly
1329 # (based on sugestion by Sarantis Paskalis)
1331 # Revision 1.7 2002/03/05 13:43:28 morcego
1332 # Checking for text browser, so redhat-dok can work.
1334 # Revision 1.6 2002/03/05 13:10:51 morcego
1335 # Changes to implement redhat-dok (Hal Burgiss)
1336 # Changes to make it work on other distros and out-of-the-shelf configurations
1338 # Revision 1.5 2002/02/27 15:30:39 hal9
1339 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1341 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1342 # Adding urlmatch.[ch]
1344 # Revision 1.3 2002/01/04 15:26:08 oes
1345 # Added tarball-src target
1347 # Revision 1.2 2001/12/30 14:07:31 steudten
1348 # - Add signal handling (unix)
1349 # - Add SIGHUP handler (unix)
1350 # - Add creation of pidfile (unix)
1351 # - Add action 'top' in rc file (RH)
1352 # - Add entry 'SIGNALS' to manpage
1353 # - Add exit message to logfile (unix)
1355 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1356 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1357 # make break in a more obvious way.
1358 # Adding .PHONY section.
1360 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1361 # Renaming various config files
1362 # Fixing CR->CRLF under Win32 (I hope)
1364 # Revision 1.39 2001/11/06 12:07:30 steudten
1365 # Add --clean for building rpm in target redhat-dist.
1367 # Revision 1.38 2001/11/05 21:35:23 steudten
1368 # Complete rewrite for the 'redhat-dist' target.
1369 # Checks for writeable RPM build directories for calling user.
1370 # So you must not be root, just set the modes to 1777 to
1371 # build a RH package.
1372 # Fix the upload-target to be arch independant.
1373 # Add target for 'solaris-dist' - coming soon.
1375 # Revision 1.37 2001/11/01 00:52:04 hal9
1376 # Redhat-upload stuff per Stefan.
1378 # Revision 1.36 2001/10/31 19:26:13 swa
1379 # automate process of uploading new releases
1382 # Revision 1.35 2001/10/15 22:14:59 joergs
1383 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1384 # the general CFLAGS already.
1386 # Revision 1.34 2001/10/15 18:28:06 steudten
1387 # remove config.cache for target clobber.
1388 # Cleanup make dist for RH and S.u.S.E.
1390 # Revision 1.33 2001/10/10 12:43:33 oes
1391 # Added ugly hack to make install target work at least for some setups.
1393 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1394 # Correcting actionsfile filename for Win32 INI build
1396 # Revision 1.31 2001/09/23 10:13:48 swa
1397 # upload process established. run make webserver and
1398 # the documentation is moved to the webserver. documents
1399 # are now linked correctly.
1401 # Revision 1.30 2001/09/19 17:55:49 oes
1404 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1405 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1406 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1407 # of build problems.
1409 # Revision 1.28 2001/09/13 15:19:08 swa
1410 # we want text files as well.
1412 # Revision 1.27 2001/09/13 13:11:37 steudten
1414 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1416 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1417 # Mac OSX (Darwin) support added.
1419 # Revision 1.25 2001/09/12 22:55:45 joergs
1420 # AmigaOS support added.
1422 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1424 # OS/2 port: update autoconf'd support for the platform.
1426 # Revision 1.23 2001/09/12 16:28:42 swa
1427 # added "make dok" section to generate html pages from
1428 # the sgml source documents. note that the we do not want
1429 # generated stuff in cvs.
1431 # Revision 1.22 2001/09/10 16:31:23 swa
1432 # buildroot definition in the specfile fucks up the build
1433 # process under suse. hence I moved it to the "rpm -ta"
1436 # Revision 1.21 2001/09/10 11:12:49 oes
1439 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1440 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1442 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1443 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1445 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1446 # Major changes to build system in order to fix these bugs:
1447 # - pthreads under Linux was broken - changed -lpthread to -pthread
1448 # - Compiling in MinGW32 mode under CygWin now correctly detects
1449 # which shared libraries are available
1450 # - Solaris support (?) (Not tested under Solaris yet)
1452 # Revision 1.17 2001/07/28 16:44:54 oes
1453 # Fixed sed LF->CRLF conversion and removed deprecated files
1455 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1456 # Added support for linking with POSIX threads library
1458 # Revision 1.15 2001/07/13 13:48:07 oes
1459 # - Moved STATIC #define for pcre to (ac)config.h
1460 # - Made -Ipcre depandant on static pcre compilation to
1461 # avoid version conflicts
1462 # - Included compilation and depandancies for new deanimate.c
1463 # - Made changes to the pcre/pcreposix/pcrs build process
1464 # as required by the new library autodetection in
1467 # Revision 1.14 2001/07/01 16:27:44 oes
1468 # Fixed misplaced dependancy
1470 # Revision 1.13 2001/06/29 13:18:36 oes
1471 # - added depandancy of filters.o on cgi.h
1473 # Revision 1.12 2001/06/12 17:15:56 swa
1474 # fixes, because a clean build on rh6.1 was impossible.
1475 # GZIP confuses make, %configure confuses rpm, etc.
1477 # Revision 1.11 2001/06/11 11:26:35 sarantis
1478 # RPM version should be the same as ijbswa version. The rpm release is
1479 # specified in the specfile.
1481 # Revision 1.10 2001/06/07 17:27:45 swa
1482 # added suse build section
1484 # Revision 1.9 2001/06/04 18:31:58 swa
1485 # files are now prefixed with either `confdir' or `logdir'.
1486 # `make redhat-dist' replaces both entries confdir and logdir
1487 # with redhat values
1489 # Revision 1.8 2001/06/04 10:44:57 swa
1490 # `make redhatr-dist' now works. Except for the paths
1491 # in the config file.
1493 # Revision 1.7 2001/06/03 17:09:09 swa
1494 # swa for oes: reversed my earlier change
1496 # Revision 1.6 2001/06/03 17:07:27 swa
1499 # Revision 1.5 2001/06/03 13:57:26 swa
1500 # compile cgi.c (for andreas' GUI)
1502 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1503 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1505 # Revision 1.3 2001/05/29 20:02:48 joergs
1506 # Changes for AmigaOS added.
1508 # Revision 1.2 2001/05/17 22:23:23 oes
1509 # - Added auto-generation of CRLFs for Win32 config files
1510 # - Added comment-prefix to all Win32-only options in the config file
1511 # and provided auto stripping of this prefix for the Win32 platform by make
1513 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1514 # Initial import of version 2.9.3 source tree