<!--
- File : $Source: /cvsroot/ijbswa/current/doc/source/changelog.sgml,v $
+ File : doc/source/changelog.sgml
Purpose : Entity included in other project documents.
- $Id: changelog.sgml,v 2.13 2015/03/29 17:22:05 fabiankeil Exp $
-
- Copyright (C) 2013 Privoxy Developers http://www.privoxy.org/
+ Copyright (C) 2013-2023 Privoxy Developers https://www.privoxy.org/
See LICENSE.
======================================================================
user-manual
-->
-<para>
- <application>Privoxy 3.0.24</application> stable contains a couple
- of new features but is mainly a bug-fix release. Two of the fixed bugs
- are security issues (CVE requests pending) and may be used to remotely
- trigger crashes on platforms that carefully check memory accesses (most don't).
-</para>
<!--
The SGML ChangeLog can be generated with: utils/changelog2doc.pl ChangeLog
-->
-<para>
+<para>
+ <application>Privoxy 3.0.34</application> fixes a few
+ minor bugs and comes with a couple of general improvements
+ and new features.
+</para>
+<para>
+ Changes in <application>Privoxy 3.0.34</application> stable:
+</para>
<para>
<itemizedlist>
<listitem>
<para>
- Security fixes (denial of service):
+ Bug fixes:
<itemizedlist>
<listitem>
<para>
- Prevent invalid reads in case of corrupt chunk-encoded content.
- Bug discovered with afl-fuzz and AddressSanitizer.
+ Improve the handling of chunk-encoded responses by buffering the data
+ even if filters are disabled and properly keeping track of where the
+ various chunks are supposed to start and end. Previously Privoxy would
+ merely check the last bytes received to see if they looked like the
+ last-chunk. This failed to work if the last-chunk wasn't received in one
+ read and could also result in actual data being misdetected
+ as last-chunk.
+ Should fix: SF support request #1739.
+ Reported by: withoutname.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ remove_chunked_transfer_coding(): Refuse to de-chunk invalid data
+ Previously the data could get corrupted even further.
+ Now we simply pass the unmodified data to the client.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ gif_deanimate(): Tolerate multiple image extensions in a row.
+ This allows to deanimate all the gifs on:
+ https://commons.wikimedia.org/wiki/Category:Animated_smilies
+ Fixes SF bug #795 reported by Celejar.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ OpenSSL generate_host_certificate(): Use X509_get_subject_name()
+ instead of X509_get_issuer_name() to get the issuer for generated
+ website certificates so there are no warnings in the browser when using
+ an intermediate CA certificate instead of a self-signed root certificate.
+ Problem reported and patch submitted by Chakib Benziane.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ can_filter_request_body(): Fix a log message that contained a spurious u.
</para>
</listitem>
<listitem>
<para>
- Remove empty Host headers in client requests.
- Previously they would result in invalid reads.
- Bug discovered with afl-fuzz and AddressSanitizer.
+ handle_established_connection(): Check for pending TLS data from the client
+ before checking if data is available on the connection.
+ The TLS library may have already consumed all the data from the client
+ response in which case poll() and select() will not detect that data is
+ available to be read.
+ Sponsored by: Robert Klemme.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ ssl_send_certificate_error(): Don't crash if there's no certificate
+ information available. This is only relevant when Privoxy is built with
+ wolfSSL 5.0.0 or later (code not yet published). Earlier wolfSSL versions
+ or the other TLS backends don't seem to trigger the crash.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ socks5_connect(): Add support for target hosts specified as IPv4 address
+ Previously the IP address was sent as domain.
</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>
- Bug fixes:
+ General improvements:
<itemizedlist>
<listitem>
<para>
- When using socks5t, send the request body optimistically as well.
- Previously the request body wasn't guaranteed to be sent at all
- and the error message incorrectly blamed the server.
- Fixes #1686 reported by Peter Müller and G4JC.
+ Add a client-body-tagger action which creates tags based on
+ the content of the request body.
+ Sponsored by: Robert Klemme.
</para>
</listitem>
<listitem>
<para>
- Fixed buffer scaling in execute_external_filter() that could lead
- to crashes. Submitted by Yang Xia in #892.
+ When client-body filters are enabled, buffer the whole request
+ before opening a connection to the server.
+ Makes it less likely that the server connection times out
+ and we don't open a connection if the buffering fails anyway.
+ Sponsored by: Robert Klemme.
</para>
</listitem>
<listitem>
<para>
- Fixed crashes when executing external filters on platforms like
- Mac OS X. Reported by Jonathan McKenzie on ijbswa-users@
+ Add periods to a couple of log messages.
</para>
</listitem>
<listitem>
<para>
- Properly parse ACL directives with ports when compiled with HAVE_RFC2553.
- Previously the port wasn't removed from the host and in case of
- 'permit-access 127.0.0.1 example.org:80' Privoxy would try (and fail)
- to resolve "example.org:80" instead of example.org.
- Reported by Pak Chan on ijbswa-users@.
+ accept_connection(): Add missing space to a log message.
</para>
</listitem>
<listitem>
<para>
- Check requests more carefully before serving them forcefully
- when blocks aren't enforced. Privoxy always adds the force token
- at the beginning of the path, but would previously accept it anywhere
- in the request line. This could result in requests being served that
- should be blocked. For example in case of pages that were loaded with
- force and contained JavaScript to create additionally requests that
- embed the origin URL (thus inheriting the force prefix).
- The bug is not considered a security issue and the fix does not make
- it harder for remote sites to intentionally circumvent blocks if
- Privoxy isn't configured to enforce them.
- Fixes #1695 reported by Korda.
+ Initialize ca-related defaults with strdup_or_die() so errors
+ aren't silently ignored.
</para>
</listitem>
<listitem>
<para>
- Normalize the request line in intercepted requests to make rewriting
- the destination more convenient. Previously rewrites for intercepted
- requests were expected to fail unless $hostport was being used, but
- they failed "the wrong way" and would result in an out-of-memory
- message (vanilla host patterns) or a crash (extended host patterns).
- Reported by "Guybrush Threepwood" in #1694.
+ make_path: Use malloc_or_die() in cases where allocation errors
+ were already fatal anyway.
</para>
</listitem>
<listitem>
<para>
- Enable socket lingering for the correct socket.
- Previously it was repeatedly enabled for the listen socket
- instead of for the accepted socket. The bug was found by
- code inspection and did not cause any (reported) issues.
+ handle_established_connection(): Improve an error message slightly.
</para>
</listitem>
<listitem>
<para>
- Detect and reject parameters for parameter-less actions.
- Previously they were silently ignored.
+ receive_client_request(): Reject https URLs without CONNECT request.
</para>
</listitem>
<listitem>
<para>
- Fixed invalid reads in internal and outdated pcre code.
- Found with afl-fuzz and AddressSanitizer.
+ Include all requests in the statistics if mutexes are available.
+ Previously in case of reused connections only the last request got
+ counted. The statistics still aren't perfect but it's an improvement.
</para>
</listitem>
<listitem>
<para>
- Prevent invalid read when loading invalid action files.
- Found with afl-fuzz and AddressSanitizer.
+ Add read_socks_reply() and start using it in socks5_connect()
+ to apply the socket timeout more consistently.
</para>
</listitem>
<listitem>
<para>
- Windows build: Use the correct function to close the event handle.
- It's unclear if this bug had a negative impact on Privoxy's behaviour.
- Reported by Jarry Xu in #891.
+ socks5_connect(): Deal with domain names in the socks reply
</para>
</listitem>
<listitem>
<para>
- In case of invalid forward-socks5(t) directives, use the
- correct directive name in the error messages. Previously they
- referred to forward-socks4t failures.
- Reported by Joel Verhagen in #889.
+ Add a filter for bundeswehr.de that hides the cookie and
+ privacy info banner.
</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>
- General improvements:
+ Action file improvements:
<itemizedlist>
<listitem>
<para>
- Set NO_DELAY flag for the accepting socket. This significantly reduces
- the latency if the operating system is not configured to set the flag
- by default. Reported by Johan Sintorn in #894.
+ Disable filter{banners-by-size} for .freiheitsfoo.de/.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Disable filter{banners-by-size} for freebsdfoundation.org/.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Disable fast-redirects for consent.youtube.com/.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Block requests to ups.xplosion.de/.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Block requests for elsa.memoinsights.com/t.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Fix a typo in a test.
</para>
</listitem>
<listitem>
<para>
- Allow to build with mingw x86_64. Submitted by Rustam Abdullaev in #135.
+ Disable fast-redirects for launchpad.net/.
</para>
</listitem>
<listitem>
<para>
- Introduce the new forwarding type 'forward-webserver'.
- Currently it is only supported by the forward-override{} action and
- there's no config directive with the same name. The forwarding type
- is similar to 'forward', but the request line only contains the path
- instead of the complete URL.
+ Unblock .eff.org/.
</para>
</listitem>
<listitem>
<para>
- The CGI editor no longer treats 'standard.action' special.
- Nowadays the official "standards" are part of default.action
- and there's no obvious reason to disallow editing them through
- the cgi editor anyway (if the user decided that the lack of
- authentication isn't an issue in her environment).
+ Stop unblocking .org/.*(image|banner) which appears to be too generous
+ The example URL http://www.gnu.org/graphics/gnu-head-banner.png is
+ already unblocked due to .gnu.org being unblocked.
</para>
</listitem>
<listitem>
<para>
- Improved error messages when rejecting intercepted requests
- with unknown destination.
+ Unblock adfd.org/.
</para>
</listitem>
<listitem>
<para>
- A couple of log messages now include the number of active threads.
+ Disable filter{banners-by-link} for .eff.org/.
</para>
</listitem>
<listitem>
<para>
- Removed non-standard Proxy-Agent headers in HTTP snipplets
- to make testing more convenient.
+ Block requests to odb.outbrain.com/.
</para>
</listitem>
<listitem>
<para>
- Include the error code for pcre errors Privoxy does not recognize.
+ Disable fast-redirects for .gandi.net/.
</para>
</listitem>
<listitem>
<para>
- Config directives with numerical arguments are checked more carefully.
+ Disable fast-redirects{} for .onion/.*/status/.
</para>
</listitem>
<listitem>
<para>
- Privoxy's malloc() wrapper has been changed to prevent zero-size
- allocations which should only occur as the result of bugs.
+ Disable fast-redirects{} for twitter.com/.*/status/.
</para>
</listitem>
<listitem>
<para>
- Various cosmetic changes.
+ Unblock pinkstinks.de/.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Disable fast-redirects for .hagalil.com/.
</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>
- Action file improvements:
+ Privoxy-Log-Parser:
<itemizedlist>
<listitem>
<para>
- Unblock ".deutschlandradiokultur.de/".
- Reported by u302320 in #924.
+ Bump version to 0.9.5.
</para>
</listitem>
<listitem>
<para>
- Add two fast-redirect exceptions for "yandex.ru".
+ Highlight more log messages.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Highlight the Crunch reason only once. Previously the "crunch reason"
+ could also be highlighted when the URL contained a matching string.
+ The real crunch reason only occurs once per line, so there's no need
+ to continue looking for it after it has been found once.
+ While at it, add a comment with an example log line.
+ </para>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ uagen:
+ <itemizedlist>
+ <listitem>
+ <para>
+ Bump version to 1.2.4.
</para>
</listitem>
<listitem>
<para>
- Disable filter{banners-by-size} for ".plasmaservice.de/".
+ Update BROWSER_VERSION and BROWSER_REVISION to 102.0
+ to match the User-Agent of the current Firefox ESR.
</para>
</listitem>
<listitem>
<para>
- Unblock klikki.fi/adv/.
+ Explicitly document that changing the 'Gecko token' is suspicious.
</para>
</listitem>
<listitem>
<para>
- Block requests for "resources.infolinks.com/".
- Reported by "Black Rider" on ijbswa-users@.
+ Consistently use a lower-case 'c' as copyright symbol.
</para>
</listitem>
<listitem>
<para>
- Block a bunch of criteo domains.
- Reported by Black Rider.
+ Bump copyright.
</para>
</listitem>
<listitem>
<para>
- Block "abs.proxistore.com/abe/".
- Reported by Black Rider.
+ Add 'aarch64' as Linux architecture.
</para>
</listitem>
<listitem>
<para>
- Disable filter{banners-by-size} for ".black-mosquito.org/".
+ Add OpenBSD architecture 'arm64'.
</para>
</listitem>
<listitem>
<para>
- Disable fast-redirects for "disqus.com/".
+ Stop using sparc64 as FreeBSD architecture.
+ It hasn't been supported for a while now.
</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>
- Documentation improvements:
+ Build system:
<itemizedlist>
<listitem>
<para>
- FAQ: Explicitly point fingers at ASUS as an example of a
- company that has been reported to force malware based on
- Privoxy upon its customers.
+ Makefile: Add a 'dok' target that depends on the 'error' target
+ to show the "You are not using GNU make or did nor run configure"
+ message.
</para>
</listitem>
<listitem>
<para>
- Correctly document the action type for a bunch of "multi-value"
- actions that were incorrectly documented to be "parameterized".
- Reported by Gregory Seidman on ijbswa-users@.
+ configure: Fix --with-msan option.
+ Also (probably) reported by Andrew Savchenko.
</para>
- </listitem>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ macOS build system:
+ <itemizedlist>
<listitem>
<para>
- Fixed the documented type of the forward-override{} action
- which is obviously 'parameterized'.
+ Enable HTTPS inspection when building the macOS binary
+ (using OpenSSL as TLS library).
</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>
- Website improvements:
+ Documentation:
<itemizedlist>
<listitem>
<para>
- Users who don't trust binaries served by SourceForge
- can get them from a mirror. Migrating away from SourceForge
- is planned for 2016 (TODO list item #53).
+ Add OpenSSL to the list of libraries that may be licensed under the
+ Apache 2.0 license in which case the linked Privoxy binary has to be
+ distributed under the GPLv3 or later.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ config: Fix the documented ca-directory default value.
+ Reported by avoidr.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Rebuild developer-manual and tidy with 'HTML Tidy for FreeBSD version 5.8.0'.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Update developer manual with new macOS packaging instructions.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Note that the FreeBSD installation instructions work for
+ ElectroBSD as well.
</para>
</listitem>
<listitem>
<para>
- The website is now available as onion service
- (http://jvauzb4sb3bwlsnc.onion/).
+ Note that FreeBSD/ElectroBSD users can try to install Privoxy
+ as binary package using 'pkg'.
</para>
</listitem>
</itemizedlist>