-
Privoxy Developer Manual
- By: Privoxy Developers
+By: Privoxy Developers
+
+$Id: developer-manual.sgml,v 1.15 2002/03/30 22:29:47 swa Exp $
+
+The developer manual gives the users information on how to help the developer
+team. It provides guidance on coding, testing, documentation and other issues.
+
+Privoxy is a web proxy with advanced filtering capabilities for protecting
+privacy, filtering web page content, managing cookies, controlling access, and
+removing ads, banners, pop-ups and other obnoxious Internet junk. Privoxy has a
+very flexible configuration and can be customized to suit individual needs and
+tastes. Privoxy has application for both stand-alone systems and multi-user
+networks.
+
+Privoxy is based on the code of the Internet Junkbuster. Junkbuster was
+originally written by JunkBusters Corporation, and was released as free
+open-source software under the GNU GPL. Stefan Waldherr made many improvements,
+and started the SourceForge project to continue development. Other developers
+have since joined Stefan.
+
+You can find the latest version of the user manual at http://www.privoxy.org/
+developer-manual/. Please see the Contact section in the user-manual if you
+want to contact the developers.
+
+-------------------------------------------------------------------------------
+
+Table of Contents
+1. Introduction
+2. Quickstart to Privoxy Development
+3. Documentation Guidelines
+4. Coding Guidelines
- $Id: developer-manual.sgml,v 1.13 2002/03/27 01:16:41 hal9 Exp $
+ 4.1. Introduction
+ 4.2. Using Comments
+
+ 4.2.1. Comment, Comment, Comment
+ 4.2.2. Use blocks for comments
+ 4.2.3. Keep Comments on their own line
+ 4.2.4. Comment each logical step
+ 4.2.5. Comment All Functions Thoroughly
+ 4.2.6. Comment at the end of braces if the content is more than one
+ screen length
+
+ 4.3. Naming Conventions
+
+ 4.3.1. Variable Names
+ 4.3.2. Function Names
+ 4.3.3. Header file prototypes
+ 4.3.4. Enumerations, and #defines
+ 4.3.5. Constants
+
+ 4.4. Using Space
+
+ 4.4.1. Put braces on a line by themselves.
+ 4.4.2. ALL control statements should have a block
+ 4.4.3. Do not belabor/blow-up boolean expressions
+ 4.4.4. Use white space freely because it is free
+ 4.4.5. Don't use white space around structure operators
+ 4.4.6. Make the last brace of a function stand out
+ 4.4.7. Use 3 character indentions
+
+ 4.5. Initializing
+
+ 4.5.1. Initialize all variables
+
+ 4.6. Functions
+
+ 4.6.1. Name functions that return a boolean as a question.
+ 4.6.2. Always specify a return type for a function.
+ 4.6.3. Minimize function calls when iterating by using variables
+ 4.6.4. Pass and Return by Const Reference
+ 4.6.5. Pass and Return by Value
+ 4.6.6. Names of include files
+ 4.6.7. Provide multiple inclusion protection
+ 4.6.8. Use `extern "C"` when appropriate
+ 4.6.9. Where Possible, Use Forward Struct Declaration Instead of
+ Includes
+
+ 4.7. General Coding Practices
+
+ 4.7.1. Turn on warnings
+ 4.7.2. Provide a default case for all switch statements
+ 4.7.3. Try to avoid falling through cases in a switch statement.
+ 4.7.4. Use 'long' or 'short' Instead of 'int'
+ 4.7.5. Don't mix size_t and other types
+ 4.7.6. Declare each variable and struct on its own line.
+ 4.7.7. Use malloc/zalloc sparingly
+ 4.7.8. The Programmer Who Uses 'malloc' is Responsible for Ensuring
+ 'free'
+ 4.7.9. Add loaders to the `file_list' structure and in order
+ 4.7.10. "Uncertain" new code and/or changes to exitinst code, use FIXME
+
+ 4.8. Addendum: Template for files and function comment blocks:
- The developer manual gives the users information on how to help the
- developer team. It provides guidance on coding, testing, documentation
- and other issues.
+5. Version Control Guidelines
+6. Testing Guidelines
- Privoxy is a web proxy with advanced filtering capabilities for
- protecting privacy, filtering web page content, managing cookies,
- controlling access, and removing ads, banners, pop-ups and other
- obnoxious Internet junk. Privoxy has a very flexible configuration and
- can be customized to suit individual needs and tastes. Privoxy has
- application for both stand-alone systems and multi-user networks.
+ 6.1. Testplan for releases
+ 6.2. Test reports
- Privoxy is based on the code of the Internet Junkbuster. Junkbuster
- was originally written by JunkBusters Corporation, and was released as
- free open-source software under the GNU GPL. Stefan Waldherr made many
- improvements, and started the SourceForge project to continue
- development. Other developers have since joined Stefan.
+7. Releasing a new version
- You can find the latest version of the user manual at
- [1]http://www.privoxy.org/developer-manual/. Please see the Contact
- section in the user-manual if you want to contact the developers.
- _________________________________________________________________
+ 7.1. Update the webserver
+ 7.2. SuSE or RedHat
+ 7.3. OS/2
+ 7.4. Solaris
+ 7.5. Windows
+ 7.6. Debian
+ 7.7. Mac OSX
+ 7.8. FreeBSD
+ 7.9. Tarball
+ 7.10. HP-UX 11
+ 7.11. Amiga OS
+ 7.12. AIX
- Table of Contents
- 1. [2]Introduction
- 2. [3]Quickstart to Privoxy Development
- 3. [4]Documentation Guidelines
- 4. [5]Coding Guidelines
-
- 4.1. [6]Introduction
- 4.2. [7]Using Comments
-
- 4.2.1. [8]Comment, Comment, Comment
- 4.2.2. [9]Use blocks for comments
- 4.2.3. [10]Keep Comments on their own line
- 4.2.4. [11]Comment each logical step
- 4.2.5. [12]Comment All Functions Thoroughly
- 4.2.6. [13]Comment at the end of braces if the content is
- more than one screen length
-
- 4.3. [14]Naming Conventions
-
- 4.3.1. [15]Variable Names
- 4.3.2. [16]Function Names
- 4.3.3. [17]Header file prototypes
- 4.3.4. [18]Enumerations, and #defines
- 4.3.5. [19]Constants
-
- 4.4. [20]Using Space
-
- 4.4.1. [21]Put braces on a line by themselves.
- 4.4.2. [22]ALL control statements should have a block
- 4.4.3. [23]Do not belabor/blow-up boolean expressions
- 4.4.4. [24]Use white space freely because it is free
- 4.4.5. [25]Don't use white space around structure operators
- 4.4.6. [26]Make the last brace of a function stand out
- 4.4.7. [27]Use 3 character indentions
-
- 4.5. [28]Initializing
-
- 4.5.1. [29]Initialize all variables
-
- 4.6. [30]Functions
-
- 4.6.1. [31]Name functions that return a boolean as a
- question.
-
- 4.6.2. [32]Always specify a return type for a function.
- 4.6.3. [33]Minimize function calls when iterating by using
- variables
-
- 4.6.4. [34]Pass and Return by Const Reference
- 4.6.5. [35]Pass and Return by Value
- 4.6.6. [36]Names of include files
- 4.6.7. [37]Provide multiple inclusion protection
- 4.6.8. [38]Use `extern "C"` when appropriate
- 4.6.9. [39]Where Possible, Use Forward Struct Declaration
- Instead of Includes
-
- 4.7. [40]General Coding Practices
-
- 4.7.1. [41]Turn on warnings
- 4.7.2. [42]Provide a default case for all switch statements
- 4.7.3. [43]Try to avoid falling through cases in a switch
- statement.
-
- 4.7.4. [44]Use 'long' or 'short' Instead of 'int'
- 4.7.5. [45]Don't mix size_t and other types
- 4.7.6. [46]Declare each variable and struct on its own
- line.
-
- 4.7.7. [47]Use malloc/zalloc sparingly
- 4.7.8. [48]The Programmer Who Uses 'malloc' is Responsible
- for Ensuring 'free'
-
- 4.7.9. [49]Add loaders to the `file_list' structure and in
- order
-
- 4.7.10. [50]"Uncertain" new code and/or changes to exitinst
- code, use FIXME
-
- 4.8. [51]Addendum: Template for files and function comment
- blocks:
-
- 5. [52]Version Control Guidelines
- 6. [53]Testing Guidelines
-
- 6.1. [54]Testplan for releases
- 6.2. [55]Test reports
-
- 7. [56]Contact the developers
- 8. [57]Copyright and History
- 9. [58]See also
-
+8. Contact the developers
+9. Copyright and History
+10. See also
+
1. Introduction
- To be filled.
- _________________________________________________________________
-
+Privoxy, as an heir to Junkbuster, is an Open Source project and licensed under
+the GPL. As such, Privoxy development is potentially open to anyone who has the
+time, knowledge, and desire to contribute in any capacity. Our goals are simply
+to continue the mission, to improve Privoxy, and to make it available to as
+wide an audience as possible.
+
+One does not have to be a programmer to contribute. Packaging, testing, and
+porting, are all important jobs as well.
+
+-------------------------------------------------------------------------------
+
2. Quickstart to Privoxy Development
- You'll need an account on Sourceforge to support our development. Mail
- you ID to the list and wait until a project manager has added you. For
- the time beeing (read, this section is under construction), please
- note the following guidelines for changing stuff in the code. If it is
+You'll need an account on Sourceforge to support our development. Mail your ID
+to the list and wait until a project manager has added you. For the time beeing
+(read, this section is under construction), please note the following
+guidelines for changing stuff in the code. If it is
+
+ 1. A bugfix / clean-up / cosmetic thing: shoot
- 1. A bugfix / clean-up / cosmetic thing: shoot
- 2. A new feature that can be turned off: shoot
- 3. A clear improvement w/o side effects on other parts of the code:
- shoot
- 4. A matter of taste: ask the list
- 5. A major redesign of some part of the code: ask the list
- _________________________________________________________________
+ 2. A new feature that can be turned off: shoot
+ 3. A clear improvement w/o side effects on other parts of the code: shoot
+
+ 4. A matter of taste: ask the list
+
+ 5. A major redesign of some part of the code: ask the list
+
+-------------------------------------------------------------------------------
+
3. Documentation Guidelines
- All docs are in SGML format and located in the doc/source directory.
-
- How do you update the webserver (i.e. the pages on sourceforge)?
+All formal documents are maintained in docbook SGML and located in the doc/
+source directory. You will need docbook and the docbook stylesheets (or
+comparable alternatives), and either jade or openjade installed in order to
+build docs from source. Currently there is user-manual, FAQ, and, of course
+this, the developer-manual in this format.
+
+Packagers are encouraged to include this documentation. For those without the
+ability to build the docs locally, text versions of each are kept in CVS. Or
+HTML versions can be downloaded from the www.privoxy.org website, which should
+be fairly current.
+
+Documents are built with the Makefile targets of make dok, or alternately make
+redhat-dok. If you have problems, try both. The build process uses the document
+SGML sources in doc/source to update all text files in doc/text and to update
+all HTML documents in doc/webserver.
+
+Documentation writers should please make sure documents build successfully
+before committing to CVS.
+
+How do you update the webserver (i.e. the pages on privoxy.org)?
+
+ 1. First, build the docs by running make dok (or alternately make redhat-dok).
- 1. Run make dok (which uses the documents in doc/source to update all
- text files in doc/text and to update all web documents in
- doc/webserver.
- 2. Run make webserver which copies all files from doc/webserver to
- the sourceforge webserver via scp.
- _________________________________________________________________
+ 2. Run make webserver which copies all files from doc/webserver to the
+ sourceforge webserver via scp.
+-------------------------------------------------------------------------------
+
4. Coding Guidelines
4.1. Introduction
- This set of standards is designed to make our lives easier. It is
- developed with the simple goal of helping us keep the "new and
- improved Privoxy" consistent and reliable. Thus making maintenance
- easier and increasing chances of success of the project.
-
- And that of course comes back to us as individuals. If we can increase
- our development and product efficiencies then we can solve more of the
- request for changes/improvements and in general feel good about
- ourselves. ;->
- _________________________________________________________________
-
+This set of standards is designed to make our lives easier. It is developed
+with the simple goal of helping us keep the "new and improved Privoxy"
+consistent and reliable. Thus making maintenance easier and increasing chances
+of success of the project.
+
+And that of course comes back to us as individuals. If we can increase our
+development and product efficiencies then we can solve more of the request for
+changes/improvements and in general feel good about ourselves. ;->
+
+-------------------------------------------------------------------------------
+
4.2. Using Comments
4.2.1. Comment, Comment, Comment
- Explanation:
-
- Comment as much as possible without commenting the obvious. For
- example do not comment "aVariable is equal to bVariable". Instead
- explain why aVariable should be equal to the bVariable. Just because a
- person can read code does not mean they will understand why or what is
- being done. A reader may spend a lot more time figuring out what is
- going on when a simple comment or explanation would have prevented the
- extra research. Please help your brother IJB'ers out!
-
- The comments will also help justify the intent of the code. If the
- comment describes something different than what the code is doing then
- maybe a programming error is occurring.
-
- Example:
-/* if page size greater than 1k ... */
-if ( PageLength() > 1024 )
-{
- ... "block" the page up ...
-}
-
-/* if page size is small, send it in blocks */
-if ( PageLength() > 1024 )
-{
- ... "block" the page up ...
-}
-
-This demonstrates 2 cases of "what not to do". The first is a
-"syntax comment". The second is a comment that does not fit what
-is actually being done.
- _________________________________________________________________
-
+Explanation:
+
+Comment as much as possible without commenting the obvious. For example do not
+comment "aVariable is equal to bVariable". Instead explain why aVariable should
+be equal to the bVariable. Just because a person can read code does not mean
+they will understand why or what is being done. A reader may spend a lot more
+time figuring out what is going on when a simple comment or explanation would
+have prevented the extra research. Please help your brother IJB'ers out!
+
+The comments will also help justify the intent of the code. If the comment
+describes something different than what the code is doing then maybe a
+programming error is occurring.
+
+Example:
+
+/* if page size greater than 1k ... */
+if ( PageLength() > 1024 )
+{
+ ... "block" the page up ...
+}
+
+/* if page size is small, send it in blocks */
+if ( PageLength() > 1024 )
+{
+ ... "block" the page up ...
+}
+
+This demonstrates 2 cases of "what not to do". The first is a
+"syntax comment". The second is a comment that does not fit what
+is actually being done.
+
+-------------------------------------------------------------------------------
+
4.2.2. Use blocks for comments
- Explanation:
-
- Comments can help or they can clutter. They help when they are
- differentiated from the code they describe. One line comments do not
- offer effective separation between the comment and the code. Block
- identifiers do, by surrounding the code with a clear, definable
- pattern.
-
- Example:
-/*********************************************************************
- * This will stand out clearly in your code!
- *********************************************************************/
-if ( thisVariable == thatVariable )
-{
- DoSomethingVeryImportant();
-}
+Explanation:
+
+Comments can help or they can clutter. They help when they are differentiated
+from the code they describe. One line comments do not offer effective
+separation between the comment and the code. Block identifiers do, by
+surrounding the code with a clear, definable pattern.
+
+Example:
+
+/*********************************************************************
+ * This will stand out clearly in your code!
+ *********************************************************************/
+if ( thisVariable == thatVariable )
+{
+ DoSomethingVeryImportant();
+}
+
+
+/* unfortunately, this may not */
+if ( thisVariable == thatVariable )
+{
+ DoSomethingVeryImportant();
+}
+
+
+if ( thisVariable == thatVariable ) /* this may not either */
+{
+ DoSomethingVeryImportant();
+}
+
+Exception:
+
+If you are trying to add a small logic comment and do not wish to "disrubt" the
+flow of the code, feel free to use a 1 line comment which is NOT on the same
+line as the code.
+
+-------------------------------------------------------------------------------
+4.2.3. Keep Comments on their own line
-/* unfortunately, this may not */
-if ( thisVariable == thatVariable )
-{
- DoSomethingVeryImportant();
-}
+Explanation:
+
+It goes back to the question of readability. If the comment is on the same line
+as the code it will be harder to read than the comment that is on its own line.
+
+There are three exceptions to this rule, which should be violated freely and
+often: during the definition of variables, at the end of closing braces, when
+used to comment parameters.
+
+Example:
+
+/*********************************************************************
+ * This will stand out clearly in your code,
+ * But the second example won't.
+ *********************************************************************/
+if ( thisVariable == thatVariable )
+{
+ DoSomethingVeryImportant();
+}
+
+if ( thisVariable == thatVariable ) /*can you see me?*/
+{
+ DoSomethingVeryImportant(); /*not easily*/
+}
+
+
+/*********************************************************************
+ * But, the encouraged exceptions:
+ *********************************************************************/
+int urls_read = 0; /* # of urls read + rejected */
+int urls_rejected = 0; /* # of urls rejected */
+
+if ( 1 == X )
+{
+ DoSomethingVeryImportant();
+}
+
+
+short DoSomethingVeryImportant(
+ short firstparam, /* represents something */
+ short nextparam /* represents something else */ )
+{
+ ...code here...
+
+} /* -END- DoSomethingVeryImportant */
+
+-------------------------------------------------------------------------------
+4.2.4. Comment each logical step
-if ( thisVariable == thatVariable ) /* this may not either */
-{
- DoSomethingVeryImportant();
-}
+Explanation:
- Exception:
-
- If you are trying to add a small logic comment and do not wish to
- "disrubt" the flow of the code, feel free to use a 1 line comment
- which is NOT on the same line as the code.
- _________________________________________________________________
-
-4.2.3. Keep Comments on their own line
+Logical steps should be commented to help others follow the intent of the
+written code and comments will make the code more readable.
- Explanation:
-
- It goes back to the question of readability. If the comment is on the
- same line as the code it will be harder to read than the comment that
- is on its own line.
-
- There are three exceptions to this rule, which should be violated
- freely and often: during the definition of variables, at the end of
- closing braces, when used to comment parameters.
-
- Example:
-/*********************************************************************
- * This will stand out clearly in your code,
- * But the second example won't.
- *********************************************************************/
-if ( thisVariable == thatVariable )
-{
- DoSomethingVeryImportant();
-}
-
-if ( thisVariable == thatVariable ) /*can you see me?*/
-{
- DoSomethingVeryImportant(); /*not easily*/
-}
-
-
-/*********************************************************************
- * But, the encouraged exceptions:
- *********************************************************************/
-int urls_read = 0; /* # of urls read + rejected */
-int urls_rejected = 0; /* # of urls rejected */
-
-if ( 1 == X )
-{
- DoSomethingVeryImportant();
-}
-
-
-short DoSomethingVeryImportant(
- short firstparam, /* represents something */
- short nextparam /* represents something else */ )
-{
- ...code here...
-
-} /* -END- DoSomethingVeryImportant */
- _________________________________________________________________
-
-4.2.4. Comment each logical step
+If you have 25 lines of code without a comment, you should probably go back
+into it to see where you forgot to put one.
+
+Most "for", "while", "do", etc... loops _probably_ need a comment. After all,
+these are usually major logic containers.
+
+-------------------------------------------------------------------------------
- Explanation:
-
- Logical steps should be commented to help others follow the intent of
- the written code and comments will make the code more readable.
-
- If you have 25 lines of code without a comment, you should probably go
- back into it to see where you forgot to put one.
-
- Most "for", "while", "do", etc... loops _probably_ need a comment.
- After all, these are usually major logic containers.
- _________________________________________________________________
-
4.2.5. Comment All Functions Thoroughly
- Explanation:
-
- A reader of the code should be able to look at the comments just prior
- to the beginning of a function and discern the reason for its
- existence and the consequences of using it. The reader should not have
- to read through the code to determine if a given function is safe for
- a desired use. The proper information thoroughly presented at the
- introduction of a function not only saves time for subsequent
- maintenance or debugging, it more importantly aids in code reuse by
- allowing a user to determine the safety and applicability of any
- function for the problem at hand. As a result of such benefits, all
- functions should contain the information presented in the addendum
- section of this document.
- _________________________________________________________________
-
+Explanation:
+
+A reader of the code should be able to look at the comments just prior to the
+beginning of a function and discern the reason for its existence and the
+consequences of using it. The reader should not have to read through the code
+to determine if a given function is safe for a desired use. The proper
+information thoroughly presented at the introduction of a function not only
+saves time for subsequent maintenance or debugging, it more importantly aids in
+code reuse by allowing a user to determine the safety and applicability of any
+function for the problem at hand. As a result of such benefits, all functions
+should contain the information presented in the addendum section of this
+document.
+
+-------------------------------------------------------------------------------
+
4.2.6. Comment at the end of braces if the content is more than one screen
length
- Explanation:
-
- Each closing brace should be followed on the same line by a comment
- that describes the origination of the brace if the original brace is
- off of the screen, or otherwise far away from the closing brace. This
- will simplify the debugging, maintenance, and readability of the code.
-
- As a suggestion , use the following flags to make the comment and its
- brace more readable:
-
- use following a closing brace: } /* -END- if() or while () or etc...
- */
-
- Example:
-if ( 1 == X )
-{
- DoSomethingVeryImportant();
- ...some long list of commands...
-} /* -END- if x is 1 */
+Explanation:
-or:
+Each closing brace should be followed on the same line by a comment that
+describes the origination of the brace if the original brace is off of the
+screen, or otherwise far away from the closing brace. This will simplify the
+debugging, maintenance, and readability of the code.
+
+As a suggestion , use the following flags to make the comment and its brace
+more readable:
+
+use following a closing brace: } /* -END- if() or while () or etc... */
+
+Example:
+
+if ( 1 == X )
+{
+ DoSomethingVeryImportant();
+ ...some long list of commands...
+} /* -END- if x is 1 */
+
+or:
+
+if ( 1 == X )
+{
+ DoSomethingVeryImportant();
+ ...some long list of commands...
+} /* -END- if ( 1 == X ) */
+
+-------------------------------------------------------------------------------
-if ( 1 == X )
-{
- DoSomethingVeryImportant();
- ...some long list of commands...
-} /* -END- if ( 1 == X ) */
- _________________________________________________________________
-
4.3. Naming Conventions
4.3.1. Variable Names
- Explanation:
-
- Use all lowercase, and seperate words via an underscore ('_'). Do not
- start an identifier with an underscore. (ANSI C reserves these for use
- by the compiler and system headers.) Do not use identifiers which are
- reserved in ANSI C++. (E.g. template, class, true, false, ...). This
- is in case we ever decide to port Privoxy to C++.
-
- Example:
-int ms_iis5_hack = 0;
+Explanation:
+
+Use all lowercase, and seperate words via an underscore ('_'). Do not start an
+identifier with an underscore. (ANSI C reserves these for use by the compiler
+and system headers.) Do not use identifiers which are reserved in ANSI C++.
+(E.g. template, class, true, false, ...). This is in case we ever decide to
+port Privoxy to C++.
+
+Example:
+
+int ms_iis5_hack = 0;
+
+Instead of:
+
+int msiis5hack = 0; int msIis5Hack = 0;
+
+-------------------------------------------------------------------------------
- Instead of:
-
-int msiis5hack = 0; int msIis5Hack = 0;
- _________________________________________________________________
-
4.3.2. Function Names
- Explanation:
-
- Use all lowercase, and seperate words via an underscore ('_'). Do not
- start an identifier with an underscore. (ANSI C reserves these for use
- by the compiler and system headers.) Do not use identifiers which are
- reserved in ANSI C++. (E.g. template, class, true, false, ...). This
- is in case we ever decide to port Privoxy to C++.
-
- Example:
-int load_some_file( struct client_state *csp )
+Explanation:
+
+Use all lowercase, and seperate words via an underscore ('_'). Do not start an
+identifier with an underscore. (ANSI C reserves these for use by the compiler
+and system headers.) Do not use identifiers which are reserved in ANSI C++.
+(E.g. template, class, true, false, ...). This is in case we ever decide to
+port Privoxy to C++.
+
+Example:
+
+int load_some_file( struct client_state *csp )
+
+Instead of:
+
+int loadsomefile( struct client_state *csp )
+int loadSomeFile( struct client_state *csp )
+
+-------------------------------------------------------------------------------
- Instead of:
-
-int loadsomefile( struct client_state *csp )
-int loadSomeFile( struct client_state *csp )
- _________________________________________________________________
-
4.3.3. Header file prototypes
- Explanation:
-
- Use a descriptive parameter name in the function prototype in header
- files. Use the same parameter name in the header file that you use in
- the c file.
-
- Example:
-(.h) extern int load_aclfile( struct client_state *csp );
-(.c) int load_aclfile( struct client_state *csp )
-
- Instead of:
-(.h) extern int load_aclfile( struct client_state * ); or
-(.h) extern int load_aclfile();
-(.c) int load_aclfile( struct client_state *csp )
- _________________________________________________________________
-
+Explanation:
+
+Use a descriptive parameter name in the function prototype in header files. Use
+the same parameter name in the header file that you use in the c file.
+
+Example:
+
+(.h) extern int load_aclfile( struct client_state *csp );
+(.c) int load_aclfile( struct client_state *csp )
+
+Instead of:
+
+(.h) extern int load_aclfile( struct client_state * ); or
+(.h) extern int load_aclfile();
+(.c) int load_aclfile( struct client_state *csp )
+
+-------------------------------------------------------------------------------
+
4.3.4. Enumerations, and #defines
- Explanation:
-
- Use all capital letters, with underscores between words. Do not start
- an identifier with an underscore. (ANSI C reserves these for use by
- the compiler and system headers.)
-
- Example:
-(enumeration) : enum Boolean { FALSE, TRUE };
-(#define) : #define DEFAULT_SIZE 100;
+Explanation:
- Note: We have a standard naming scheme for #defines that toggle a
- feature in the preprocessor: FEATURE_>, where > is a short (preferably
- 1 or 2 word) description.
-
- Example:
-#define FEATURE_FORCE 1
+Use all capital letters, with underscores between words. Do not start an
+identifier with an underscore. (ANSI C reserves these for use by the compiler
+and system headers.)
+
+Example:
+
+(enumeration) : enum Boolean { FALSE, TRUE };
+(#define) : #define DEFAULT_SIZE 100;
+
+Note: We have a standard naming scheme for #defines that toggle a feature in
+the preprocessor: FEATURE_>, where > is a short (preferably 1 or 2 word)
+description.
+
+Example:
+
+#define FEATURE_FORCE 1
+
+#ifdef FEATURE_FORCE
+#define FORCE_PREFIX blah
+#endif /* def FEATURE_FORCE */
+
+-------------------------------------------------------------------------------
-#ifdef FEATURE_FORCE
-#define FORCE_PREFIX blah
-#endif /* def FEATURE_FORCE */
- _________________________________________________________________
-
4.3.5. Constants
- Explanation:
-
- Spell common words out entirely (do not remove vowels).
-
- Use only widely-known domain acronyms and abbreviations. Capitalize
- all letters of an acronym.
-
- Use underscore (_) to separate adjacent acronyms and abbreviations.
- Never terminate a name with an underscore.
-
- Example:
-#define USE_IMAGE_LIST 1
+Explanation:
+
+Spell common words out entirely (do not remove vowels).
+
+Use only widely-known domain acronyms and abbreviations. Capitalize all letters
+of an acronym.
+
+Use underscore (_) to separate adjacent acronyms and abbreviations. Never
+terminate a name with an underscore.
+
+Example:
+
+#define USE_IMAGE_LIST 1
+
+Instead of:
+
+#define USE_IMG_LST 1 or
+#define _USE_IMAGE_LIST 1 or
+#define USE_IMAGE_LIST_ 1 or
+#define use_image_list 1 or
+#define UseImageList 1
+
+-------------------------------------------------------------------------------
- Instead of:
-
-#define USE_IMG_LST 1 or
-#define _USE_IMAGE_LIST 1 or
-#define USE_IMAGE_LIST_ 1 or
-#define use_image_list 1 or
-#define UseImageList 1
- _________________________________________________________________
-
4.4. Using Space
4.4.1. Put braces on a line by themselves.
- Explanation:
-
- The brace needs to be on a line all by itself, not at the end of the
- statement. Curly braces should line up with the construct that they're
- associated with. This practice makes it easier to identify the opening
- and closing braces for a block.
-
- Example:
-if ( this == that )
-{
- ...
-}
+Explanation:
+
+The brace needs to be on a line all by itself, not at the end of the statement.
+Curly braces should line up with the construct that they're associated with.
+This practice makes it easier to identify the opening and closing braces for a
+block.
+
+Example:
+
+if ( this == that )
+{
+ ...
+}
+
+Instead of:
+
+if ( this == that ) { ... }
+
+or
+
+if ( this == that ) { ... }
+
+Note: In the special case that the if-statement is inside a loop, and it is
+trivial, i.e. it tests for a condidtion that is obvious from the purpose of the
+block, one-liners as above may optically preserve the loop structure and make
+it easier to read.
+
+Status: developer-discrection.
+
+Example exception:
+
+while ( more lines are read )
+{
+ /* Please document what is/is not a comment line here */
+ if ( it's a comment ) continue;
+
+ do_something( line );
+}
+
+-------------------------------------------------------------------------------
- Instead of:
-
- if ( this == that ) { ... }
-
- or
-
- if ( this == that ) { ... }
-
- Note: In the special case that the if-statement is inside a loop, and
- it is trivial, i.e. it tests for a condidtion that is obvious from the
- purpose of the block, one-liners as above may optically preserve the
- loop structure and make it easier to read.
-
- Status: developer-discrection.
-
- Example exception:
-while ( more lines are read )
-{
- /* Please document what is/is not a comment line here */
- if ( it's a comment ) continue;
-
- do_something( line );
-}
- _________________________________________________________________
-
4.4.2. ALL control statements should have a block
- Explanation:
-
- Using braces to make a block will make your code more readable and
- less prone to error. All control statements should have a block
- defined.
-
- Example:
-if ( this == that )
-{
- DoSomething();
- DoSomethingElse();
-}
-
- Instead of:
-
- if ( this == that ) DoSomething(); DoSomethingElse();
-
- or
-
- if ( this == that ) DoSomething();
-
- Note: The first example in "Instead of" will execute in a manner other
- than that which the developer desired (per indentation). Using code
- braces would have prevented this "feature". The "explanation" and
- "exception" from the point above also applies.
- _________________________________________________________________
-
+Explanation:
+
+Using braces to make a block will make your code more readable and less prone
+to error. All control statements should have a block defined.
+
+Example:
+
+if ( this == that )
+{
+ DoSomething();
+ DoSomethingElse();
+}
+
+Instead of:
+
+if ( this == that ) DoSomething(); DoSomethingElse();
+
+or
+
+if ( this == that ) DoSomething();
+
+Note: The first example in "Instead of" will execute in a manner other than
+that which the developer desired (per indentation). Using code braces would
+have prevented this "feature". The "explanation" and "exception" from the point
+above also applies.
+
+-------------------------------------------------------------------------------
+
4.4.3. Do not belabor/blow-up boolean expressions
- Example:
-structure->flag = ( condition );
+Example:
+
+structure->flag = ( condition );
+
+Instead of:
+
+if ( condition ) { structure->flag = 1; } else { structure->flag = 0; }
+
+Note: The former is readable and consice. The later is wordy and inefficient.
+Please assume that any developer new to the project has at least a "good"
+knowledge of C/C++. (Hope I do not offend by that last comment ... 8-)
+
+-------------------------------------------------------------------------------
- Instead of:
-
- if ( condition ) { structure->flag = 1; } else { structure->flag = 0;
- }
-
- Note: The former is readable and consice. The later is wordy and
- inefficient. Please assume that any developer new to the project has
- at least a "good" knowledge of C/C++. (Hope I do not offend by that
- last comment ... 8-)
- _________________________________________________________________
-
4.4.4. Use white space freely because it is free
- Explanation:
-
- Make it readable. The notable exception to using white space freely is
- listed in the next guideline.
-
- Example:
-int firstValue = 0;
-int someValue = 0;
-int anotherValue = 0;
-int thisVariable = 0;
+Explanation:
-if ( thisVariable == thatVariable )
+Make it readable. The notable exception to using white space freely is listed
+in the next guideline.
+
+Example:
+
+int firstValue = 0;
+int someValue = 0;
+int anotherValue = 0;
+int thisVariable = 0;
+
+if ( thisVariable == thatVariable )
+
+firstValue = oldValue + ( ( someValue - anotherValue ) - whatever )
+
+-------------------------------------------------------------------------------
-firstValue = oldValue + ( ( someValue - anotherValue ) - whatever )
- _________________________________________________________________
-
4.4.5. Don't use white space around structure operators
- Explanation:
-
- - structure pointer operator ( "->" ) - member operator ( "." ) -
- functions and parentheses
-
- It is a general coding practice to put pointers, references, and
- function parentheses next to names. With spaces, the connection
- between the object and variable/function name is not as clear.
-
- Example:
-aStruct->aMember;
-aStruct.aMember;
-FunctionName();
+Explanation:
+
+- structure pointer operator ( "->" ) - member operator ( "." ) - functions and
+parentheses
+
+It is a general coding practice to put pointers, references, and function
+parentheses next to names. With spaces, the connection between the object and
+variable/function name is not as clear.
+
+Example:
+
+aStruct->aMember;
+aStruct.aMember;
+FunctionName();
+
+Instead of: aStruct -> aMember; aStruct . aMember; FunctionName ();
+
+-------------------------------------------------------------------------------
- Instead of: aStruct -> aMember; aStruct . aMember; FunctionName ();
- _________________________________________________________________
-
4.4.6. Make the last brace of a function stand out
- Example:
-int function1( ... )
-{
- ...code...
- return( retCode );
+Example:
-} /* -END- function1 */
+int function1( ... )
+{
+ ...code...
+ return( retCode );
+
+} /* -END- function1 */
+
+
+int function2( ... )
+{
+} /* -END- function2 */
+Instead of:
-int function2( ... )
-{
-} /* -END- function2 */
+int function1( ... ) { ...code... return( retCode ); } int function2( ... ) { }
+
+Note: Use 1 blank line before the closing brace and 2 lines afterwards. This
+makes the end of function standout to the most casual viewer. Although function
+comments help seperate functions, this is still a good coding practice. In
+fact, I follow these rules when using blocks in "for", "while", "do" loops, and
+long if {} statements too. After all whitespace is free!
+
+Status: developer-discrection on the number of blank lines. Enforced is the end
+of function comments.
+
+-------------------------------------------------------------------------------
- Instead of:
-
- int function1( ... ) { ...code... return( retCode ); } int function2(
- ... ) { }
-
- Note: Use 1 blank line before the closing brace and 2 lines
- afterwards. This makes the end of function standout to the most casual
- viewer. Although function comments help seperate functions, this is
- still a good coding practice. In fact, I follow these rules when using
- blocks in "for", "while", "do" loops, and long if {} statements too.
- After all whitespace is free!
-
- Status: developer-discrection on the number of blank lines. Enforced
- is the end of function comments.
- _________________________________________________________________
-
4.4.7. Use 3 character indentions
- Explanation:
-
- If some use 8 character TABs and some use 3 character TABs, the code
- can look *very* ragged. So use 3 character indentions only. If you
- like to use TABs, pass your code through a filter such as "expand -t3"
- before checking in your code.
-
- Example:
-static const char * const url_code_map[256] =
-{
- NULL, ...
-};
-
-
-int function1( ... )
-{
- if ( 1 )
- {
- return( ALWAYS_TRUE );
- }
- else
- {
- return( HOW_DID_YOU_GET_HERE );
- }
-
- return( NEVER_GETS_HERE );
-
-}
- _________________________________________________________________
-
+Explanation:
+
+If some use 8 character TABs and some use 3 character TABs, the code can look *
+very* ragged. So use 3 character indentions only. If you like to use TABs, pass
+your code through a filter such as "expand -t3" before checking in your code.
+
+Example:
+
+static const char * const url_code_map[256] =
+{
+ NULL, ...
+};
+
+
+int function1( ... )
+{
+ if ( 1 )
+ {
+ return( ALWAYS_TRUE );
+ }
+ else
+ {
+ return( HOW_DID_YOU_GET_HERE );
+ }
+
+ return( NEVER_GETS_HERE );
+
+}
+
+-------------------------------------------------------------------------------
+
4.5. Initializing
4.5.1. Initialize all variables
- Explanation:
-
- Do not assume that the variables declared will not be used until after
- they have been assigned a value somewhere else in the code. Remove the
- chance of accidentally using an unassigned variable.
-
- Example:
-short anShort = 0;
-float aFloat = 0;
-struct *ptr = NULL;
-
- Note: It is much easier to debug a SIGSEGV if the message says you are
- trying to access memory address 00000000 and not 129FA012; or
- arrayPtr[20] causes a SIGSEV vs. arrayPtr[0].
-
- Status: developer-discrection if and only if the variable is assigned
- a value "shortly after" declaration.
- _________________________________________________________________
-
+Explanation:
+
+Do not assume that the variables declared will not be used until after they
+have been assigned a value somewhere else in the code. Remove the chance of
+accidentally using an unassigned variable.
+
+Example:
+
+short anShort = 0;
+float aFloat = 0;
+struct *ptr = NULL;
+
+Note: It is much easier to debug a SIGSEGV if the message says you are trying
+to access memory address 00000000 and not 129FA012; or arrayPtr[20] causes a
+SIGSEV vs. arrayPtr[0].
+
+Status: developer-discrection if and only if the variable is assigned a value
+"shortly after" declaration.
+
+-------------------------------------------------------------------------------
+
4.6. Functions
4.6.1. Name functions that return a boolean as a question.
- Explanation:
-
- Value should be phrased as a question that would logically be answered
- as a true or false statement
-
- Example:
-ShouldWeBlockThis();
-ContainsAnImage();
-IsWebPageBlank();
- _________________________________________________________________
-
+Explanation:
+
+Value should be phrased as a question that would logically be answered as a
+true or false statement
+
+Example:
+
+ShouldWeBlockThis();
+ContainsAnImage();
+IsWebPageBlank();
+
+-------------------------------------------------------------------------------
+
4.6.2. Always specify a return type for a function.
- Explanation:
-
- The default return for a function is an int. To avoid ambiguity,
- create a return for a function when the return has a purpose, and
- create a void return type if the function does not need to return
- anything.
- _________________________________________________________________
-
+Explanation:
+
+The default return for a function is an int. To avoid ambiguity, create a
+return for a function when the return has a purpose, and create a void return
+type if the function does not need to return anything.
+
+-------------------------------------------------------------------------------
+
4.6.3. Minimize function calls when iterating by using variables
- Explanation:
-
- It is easy to write the following code, and a clear argument can be
- made that the code is easy to understand:
-
- Example:
-for ( size_t cnt = 0; cnt < blockListLength(); cnt ++ )
-{
- ....
-}
-
- Note: Unfortunately, this makes a function call for each and every
- iteration. This increases the overhead in the program, because the
- compiler has to look up the function each time, call it, and return a
- value. Depending on what occurs in the blockListLength() call, it
- might even be creating and destroying structures with each iteration,
- even though in each case it is comparing "cnt" to the same value, over
- and over. Remember too - even a call to blockListLength() is a
- function call, with the same overhead.
-
- Instead of using a function call during the iterations, assign the
- value to a variable, and evaluate using the variable.
-
- Example:
-size_t len = blockListLength();
-
-for ( size_t cnt = 0; cnt < len; cnt ++ )
-{
- ....
-}
-
- Exceptions: if the value of blockListLength() *may* change or could
- *potentially* change, then you must code the function call in the
- for/while loop.
- _________________________________________________________________
-
-4.6.4. Pass and Return by Const Reference
+Explanation:
- Explanation:
-
- This allows a developer to define a const pointer and call your
- function. If your function does not have the const keyword, we may not
- be able to use your function. Consider strcmp, if it were defined as:
- extern int strcmp( char *s1, char *s2 );
-
- I could then not use it to compare argv's in main: int main( int argc,
- const char *argv[] ) { strcmp( argv[0], "privoxy" ); }
-
- Both these pointers are *const*! If the c runtime library maintainers
- do it, we should too.
- _________________________________________________________________
-
-4.6.5. Pass and Return by Value
+It is easy to write the following code, and a clear argument can be made that
+the code is easy to understand:
- Explanation:
-
- Most structures cannot fit onto a normal stack entry (i.e. they are
- not 4 bytes or less). Aka, a function declaration like: int
- load_aclfile( struct client_state csp )
-
- would not work. So, to be consistent, we should declare all prototypes
- with "pass by value": int load_aclfile( struct client_state *csp )
- _________________________________________________________________
-
-4.6.6. Names of include files
+Example:
- Explanation:
-
- Your include statements should contain the file name without a path.
- The path should be listed in the Makefile, using -I as processor
- directive to search the indicated paths. An exception to this would be
- for some proprietary software that utilizes a partial path to
- distinguish their header files from system or other header files.
-
- Example:
-#include <iostream.h> /* This is not a local include */
-#include "config.h" /* This IS a local include */
+for ( size_t cnt = 0; cnt < blockListLength(); cnt ++ )
+{
+ ....
+}
- Exception:
-
-/* This is not a local include, but requires a path element. */
-#include <sys/fileName.h>
+Note: Unfortunately, this makes a function call for each and every iteration.
+This increases the overhead in the program, because the compiler has to look up
+the function each time, call it, and return a value. Depending on what occurs
+in the blockListLength() call, it might even be creating and destroying
+structures with each iteration, even though in each case it is comparing "cnt"
+to the same value, over and over. Remember too - even a call to blockListLength
+() is a function call, with the same overhead.
+
+Instead of using a function call during the iterations, assign the value to a
+variable, and evaluate using the variable.
+
+Example:
+
+size_t len = blockListLength();
+
+for ( size_t cnt = 0; cnt < len; cnt ++ )
+{
+ ....
+}
+
+Exceptions: if the value of blockListLength() *may* change or could *
+potentially* change, then you must code the function call in the for/while
+loop.
+
+-------------------------------------------------------------------------------
+
+4.6.4. Pass and Return by Const Reference
+
+Explanation:
+
+This allows a developer to define a const pointer and call your function. If
+your function does not have the const keyword, we may not be able to use your
+function. Consider strcmp, if it were defined as: extern int strcmp( char *s1,
+char *s2 );
+
+I could then not use it to compare argv's in main: int main( int argc, const
+char *argv[] ) { strcmp( argv[0], "privoxy" ); }
+
+Both these pointers are *const*! If the c runtime library maintainers do it, we
+should too.
+
+-------------------------------------------------------------------------------
+
+4.6.5. Pass and Return by Value
+
+Explanation:
+
+Most structures cannot fit onto a normal stack entry (i.e. they are not 4 bytes
+or less). Aka, a function declaration like: int load_aclfile( struct
+client_state csp )
+
+would not work. So, to be consistent, we should declare all prototypes with
+"pass by value": int load_aclfile( struct client_state *csp )
+
+-------------------------------------------------------------------------------
+
+4.6.6. Names of include files
+
+Explanation:
+
+Your include statements should contain the file name without a path. The path
+should be listed in the Makefile, using -I as processor directive to search the
+indicated paths. An exception to this would be for some proprietary software
+that utilizes a partial path to distinguish their header files from system or
+other header files.
+
+Example:
+
+#include <iostream.h> /* This is not a local include */
+#include "config.h" /* This IS a local include */
+
+Exception:
+
+/* This is not a local include, but requires a path element. */
+#include <sys/fileName.h>
+
+Note: Please! do not add "-I." to the Makefile without a _very_ good reason.
+This duplicates the #include "file.h" behaviour.
+
+-------------------------------------------------------------------------------
- Note: Please! do not add "-I." to the Makefile without a _very_ good
- reason. This duplicates the #include "file.h" behaviour.
- _________________________________________________________________
-
4.6.7. Provide multiple inclusion protection
- Explanation:
-
- Prevents compiler and linker errors resulting from redefinition of
- items.
-
- Wrap each header file with the following syntax to prevent multiple
- inclusions of the file. Of course, replace PROJECT_H with your file
- name, with "." Changed to "_", and make it uppercase.
-
- Example:
-#ifndef PROJECT_H_INCLUDED
-#define PROJECT_H_INCLUDED
- ...
-#endif /* ndef PROJECT_H_INCLUDED */
- _________________________________________________________________
-
+Explanation:
+
+Prevents compiler and linker errors resulting from redefinition of items.
+
+Wrap each header file with the following syntax to prevent multiple inclusions
+of the file. Of course, replace PROJECT_H with your file name, with "." Changed
+to "_", and make it uppercase.
+
+Example:
+
+#ifndef PROJECT_H_INCLUDED
+#define PROJECT_H_INCLUDED
+ ...
+#endif /* ndef PROJECT_H_INCLUDED */
+
+-------------------------------------------------------------------------------
+
4.6.8. Use `extern "C"` when appropriate
- Explanation:
-
- If our headers are included from C++, they must declare our functions
- as `extern "C"`. This has no cost in C, but increases the potential
- re-usability of our code.
-
- Example:
-#ifdef __cplusplus
-extern "C"
-{
-#endif /* def __cplusplus */
-
-... function definitions here ...
-
-#ifdef __cplusplus
-}
-#endif /* def __cplusplus */
- _________________________________________________________________
-
+Explanation:
+
+If our headers are included from C++, they must declare our functions as
+`extern "C"`. This has no cost in C, but increases the potential re-usability
+of our code.
+
+Example:
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* def __cplusplus */
+
+... function definitions here ...
+
+#ifdef __cplusplus
+}
+#endif /* def __cplusplus */
+
+-------------------------------------------------------------------------------
+
4.6.9. Where Possible, Use Forward Struct Declaration Instead of Includes
- Explanation:
-
- Useful in headers that include pointers to other struct's.
- Modifications to excess header files may cause needless compiles.
-
- Example:
-/*********************************************************************
- * We're avoiding an include statement here!
- *********************************************************************/
-struct file_list;
-extern file_list *xyz;
-
- Note: If you declare "file_list xyz;" (without the pointer), then
- including the proper header file is necessary. If you only want to
- prototype a pointer, however, the header file is unneccessary.
-
- Status: Use with discrection.
- _________________________________________________________________
-
+Explanation:
+
+Useful in headers that include pointers to other struct's. Modifications to
+excess header files may cause needless compiles.
+
+Example:
+
+/*********************************************************************
+ * We're avoiding an include statement here!
+ *********************************************************************/
+struct file_list;
+extern file_list *xyz;
+
+Note: If you declare "file_list xyz;" (without the pointer), then including the
+proper header file is necessary. If you only want to prototype a pointer,
+however, the header file is unneccessary.
+
+Status: Use with discrection.
+
+-------------------------------------------------------------------------------
+
4.7. General Coding Practices
4.7.1. Turn on warnings
- Explanation
-
- Compiler warnings are meant to help you find bugs. You should turn on
- as many as possible. With GCC, the switch is "-Wall". Try and fix as
- many warnings as possible.
- _________________________________________________________________
-
+Explanation
+
+Compiler warnings are meant to help you find bugs. You should turn on as many
+as possible. With GCC, the switch is "-Wall". Try and fix as many warnings as
+possible.
+
+-------------------------------------------------------------------------------
+
4.7.2. Provide a default case for all switch statements
- Explanation:
-
- What you think is guaranteed is never really guaranteed. The value
- that you don't think you need to check is the one that someday will be
- passed. So, to protect yourself from the unknown, always have a
- default step in a switch statement.
-
- Example:
-switch( hash_string( cmd ) )
-{
- case hash_actions_file :
- ... code ...
- break;
-
- case hash_confdir :
- ... code ...
- break;
-
- default :
- log_error( ... );
- ... anomly code goes here ...
- continue; / break; / exit( 1 ); / etc ...
-
-} /* end switch( hash_string( cmd ) ) */
-
- Note: If you already have a default condition, you are obviously
- exempt from this point. Of note, most of the WIN32 code calls
- `DefWindowProc' after the switch statement. This API call *should* be
- included in a default statement.
-
- Another Note: This is not so much a readability issue as a robust
- programming issue. The "anomly code goes here" may be no more than a
- print to the STDERR stream (as in load_config). Or it may really be an
- ABEND condition.
-
- Status: Programmer discretion is advised.
- _________________________________________________________________
-
+Explanation:
+
+What you think is guaranteed is never really guaranteed. The value that you
+don't think you need to check is the one that someday will be passed. So, to
+protect yourself from the unknown, always have a default step in a switch
+statement.
+
+Example:
+
+switch( hash_string( cmd ) )
+{
+ case hash_actions_file :
+ ... code ...
+ break;
+
+ case hash_confdir :
+ ... code ...
+ break;
+
+ default :
+ log_error( ... );
+ ... anomly code goes here ...
+ continue; / break; / exit( 1 ); / etc ...
+
+} /* end switch( hash_string( cmd ) ) */
+
+Note: If you already have a default condition, you are obviously exempt from
+this point. Of note, most of the WIN32 code calls `DefWindowProc' after the
+switch statement. This API call *should* be included in a default statement.
+
+Another Note: This is not so much a readability issue as a robust programming
+issue. The "anomly code goes here" may be no more than a print to the STDERR
+stream (as in load_config). Or it may really be an ABEND condition.
+
+Status: Programmer discretion is advised.
+
+-------------------------------------------------------------------------------
+
4.7.3. Try to avoid falling through cases in a switch statement.
- Explanation:
-
- In general, you will want to have a 'break' statement within each
- 'case' of a switch statement. This allows for the code to be more
- readable and understandable, and furthermore can prevent unwanted
- surprises if someone else later gets creative and moves the code
- around.
-
- The language allows you to plan the fall through from one case
- statement to another simply by omitting the break statement within the
- case statement. This feature does have benefits, but should only be
- used in rare cases. In general, use a break statement for each case
- statement.
-
- If you choose to allow fall through, you should comment both the fact
- of the fall through and reason why you felt it was necessary.
- _________________________________________________________________
-
+Explanation:
+
+In general, you will want to have a 'break' statement within each 'case' of a
+switch statement. This allows for the code to be more readable and
+understandable, and furthermore can prevent unwanted surprises if someone else
+later gets creative and moves the code around.
+
+The language allows you to plan the fall through from one case statement to
+another simply by omitting the break statement within the case statement. This
+feature does have benefits, but should only be used in rare cases. In general,
+use a break statement for each case statement.
+
+If you choose to allow fall through, you should comment both the fact of the
+fall through and reason why you felt it was necessary.
+
+-------------------------------------------------------------------------------
+
4.7.4. Use 'long' or 'short' Instead of 'int'
- Explanation:
-
- On 32-bit platforms, int usually has the range of long. On 16-bit
- platforms, int has the range of short.
-
- Status: open-to-debate. In the case of most FSF projects (including
- X/GNU-Emacs), there are typedefs to int4, int8, int16, (or equivalence
- ... I forget the exact typedefs now). Should we add these to IJB now
- that we have a "configure" script?
- _________________________________________________________________
-
+Explanation:
+
+On 32-bit platforms, int usually has the range of long. On 16-bit platforms,
+int has the range of short.
+
+Status: open-to-debate. In the case of most FSF projects (including X/
+GNU-Emacs), there are typedefs to int4, int8, int16, (or equivalence ... I
+forget the exact typedefs now). Should we add these to IJB now that we have a
+"configure" script?
+
+-------------------------------------------------------------------------------
+
4.7.5. Don't mix size_t and other types
- Explanation:
-
- The type of size_t varies across platforms. Do not make assumptions
- about whether it is signed or unsigned, or about how long it is. Do
- not compare a size_t against another variable of a different type (or
- even against a constant) without casting one of the values. Try to
- avoid using size_t if you can.
- _________________________________________________________________
-
+Explanation:
+
+The type of size_t varies across platforms. Do not make assumptions about
+whether it is signed or unsigned, or about how long it is. Do not compare a
+size_t against another variable of a different type (or even against a
+constant) without casting one of the values. Try to avoid using size_t if you
+can.
+
+-------------------------------------------------------------------------------
+
4.7.6. Declare each variable and struct on its own line.
- Explanation:
-
- It can be tempting to declare a series of variables all on one line.
- Don't.
-
- Example:
-long a = 0;
-long b = 0;
-long c = 0;
+Explanation:
+
+It can be tempting to declare a series of variables all on one line. Don't.
+
+Example:
+
+long a = 0;
+long b = 0;
+long c = 0;
+
+Instead of:
+
+long a, b, c;
+
+Explanation: - there is more room for comments on the individual variables -
+easier to add new variables without messing up the original ones - when
+searching on a variable to find its type, there is less clutter to "visually"
+eliminate
+
+Exceptions: when you want to declare a bunch of loop variables or other trivial
+variables; feel free to declare them on 1 line. You should, although, provide a
+good comment on their functions.
+
+Status: developer-discrection.
+
+-------------------------------------------------------------------------------
- Instead of:
-
- long a, b, c;
-
- Explanation: - there is more room for comments on the individual
- variables - easier to add new variables without messing up the
- original ones - when searching on a variable to find its type, there
- is less clutter to "visually" eliminate
-
- Exceptions: when you want to declare a bunch of loop variables or
- other trivial variables; feel free to declare them on 1 line. You
- should, although, provide a good comment on their functions.
-
- Status: developer-discrection.
- _________________________________________________________________
-
4.7.7. Use malloc/zalloc sparingly
- Explanation:
-
- Create a local stuct (on the stack) if the variable will live and die
- within the context of one function call.
-
- Only "malloc" a struct (on the heap) if the variable's life will
- extend beyond the context of one function call.
-
- Example:
-If a function creates a struct and stores a pointer to it in a
-list, then it should definately be allocated via `malloc'.
- _________________________________________________________________
-
+Explanation:
+
+Create a local stuct (on the stack) if the variable will live and die within
+the context of one function call.
+
+Only "malloc" a struct (on the heap) if the variable's life will extend beyond
+the context of one function call.
+
+Example:
+
+If a function creates a struct and stores a pointer to it in a
+list, then it should definately be allocated via `malloc'.
+
+-------------------------------------------------------------------------------
+
4.7.8. The Programmer Who Uses 'malloc' is Responsible for Ensuring 'free'
- Explanation:
-
- If you have to "malloc" an instance, you are responsible for insuring
- that the instance is `free'd, even if the deallocation event falls
- within some other programmer's code. You are also responsible for
- ensuring that deletion is timely (i.e. not too soon, not too late).
- This is known as "low-coupling" and is a "good thing (tm)". You may
- need to offer a free/unload/destuctor type function to accomodate
- this.
-
- Example:
-int load_re_filterfile( struct client_state *csp ) { ... }
-static void unload_re_filterfile( void *f ) { ... }
+Explanation:
+
+If you have to "malloc" an instance, you are responsible for insuring that the
+instance is `free'd, even if the deallocation event falls within some other
+programmer's code. You are also responsible for ensuring that deletion is
+timely (i.e. not too soon, not too late). This is known as "low-coupling" and
+is a "good thing (tm)". You may need to offer a free/unload/destuctor type
+function to accomodate this.
+
+Example:
+
+int load_re_filterfile( struct client_state *csp ) { ... }
+static void unload_re_filterfile( void *f ) { ... }
+
+Exceptions:
+
+The developer cannot be expected to provide `free'ing functions for C run-time
+library functions ... such as `strdup'.
+
+Status: developer-discrection. The "main" use of this standard is for
+allocating and freeing data structures (complex or nested).
+
+-------------------------------------------------------------------------------
- Exceptions:
-
- The developer cannot be expected to provide `free'ing functions for C
- run-time library functions ... such as `strdup'.
-
- Status: developer-discrection. The "main" use of this standard is for
- allocating and freeing data structures (complex or nested).
- _________________________________________________________________
-
4.7.9. Add loaders to the `file_list' structure and in order
- Explanation:
-
- I have ordered all of the "blocker" file code to be in alpha order. It
- is easier to add/read new blockers when you expect a certain order.
-
- Note: It may appear that the alpha order is broken in places by POPUP
- tests coming before PCRS tests. But since POPUPs can also be referred
- to as KILLPOPUPs, it is clear that it should come first.
- _________________________________________________________________
-
+Explanation:
+
+I have ordered all of the "blocker" file code to be in alpha order. It is
+easier to add/read new blockers when you expect a certain order.
+
+Note: It may appear that the alpha order is broken in places by POPUP tests
+coming before PCRS tests. But since POPUPs can also be referred to as
+KILLPOPUPs, it is clear that it should come first.
+
+-------------------------------------------------------------------------------
+
4.7.10. "Uncertain" new code and/or changes to exitinst code, use FIXME
- Explanation:
-
- If you have enough confidence in new code or confidence in your
- changes, but are not *quite* sure of the reprocussions, add this:
-
- /* FIXME: this code has a logic error on platform XYZ, * attempthing
- to fix */ #ifdef PLATFORM ...changed code here... #endif
-
- or:
-
- /* FIXME: I think the original author really meant this... */
- ...changed code here...
-
- or:
-
- /* FIXME: new code that *may* break something else... */ ...new code
- here...
-
- Note: If you make it clear that this may or may not be a "good thing
- (tm)", it will be easier to identify and include in the project (or
- conversly exclude from the project).
- _________________________________________________________________
-
+Explanation:
+
+If you have enough confidence in new code or confidence in your changes, but
+are not *quite* sure of the reprocussions, add this:
+
+/* FIXME: this code has a logic error on platform XYZ, * attempthing to fix */
+#ifdef PLATFORM ...changed code here... #endif
+
+or:
+
+/* FIXME: I think the original author really meant this... */ ...changed code
+here...
+
+or:
+
+/* FIXME: new code that *may* break something else... */ ...new code here...
+
+Note: If you make it clear that this may or may not be a "good thing (tm)", it
+will be easier to identify and include in the project (or conversly exclude
+from the project).
+
+-------------------------------------------------------------------------------
+
4.8. Addendum: Template for files and function comment blocks:
- Example for file comments:
-const char FILENAME_rcs[] = "$Id: developer-manual.sgml,v 1.13 2002/03/27 01:16
-:41 hal9 Exp $";
-/*********************************************************************
- *
- * File : $Source$
- *
- * Purpose : (Fill me in with a good description!)
- *
- * Copyright : Written by and Copyright (C) 2001 the SourceForge
- * Privoxy team. http://www.privoxy.org/
- *
- * Based on the Internet Junkbuster originally written
- * by and Copyright (C) 1997 Anonymous Coders and
- * Junkbusters Corporation. http://www.junkbusters.com
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will
- * be useful, but WITHOUT ANY WARRANTY; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A
- * PARTICULAR PURPOSE. See the GNU General Public
- * License for more details.
- *
- * The GNU General Public License should be included with
- * this file. If not, you can view it at
- * http://www.gnu.org/copyleft/gpl.html
- * or write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Revisions :
- * $Log$
- *
- *********************************************************************/
-
-
-#include "config.h"
-
- ...necessary include files for us to do our work...
-
-const char FILENAME_h_rcs[] = FILENAME_H_VERSION;
-
- Note: This declares the rcs variables that should be added to the
- "show-proxy-args" page. If this is a brand new creation by you, you
- are free to change the "Copyright" section to represent the rights you
- wish to maintain.
-
- Note: The formfeed character that is present right after the comment
- flower box is handy for (X|GNU)Emacs users to skip the verbige and get
- to the heart of the code (via `forward-page' and `backward-page').
- Please include it if you can.
-
- Example for file header comments:
-#ifndef _FILENAME_H
-#define _FILENAME_H
-#define FILENAME_H_VERSION "$Id: developer-manual.sgml,v 1.13 2002/03/27 01:16:
-41 hal9 Exp $"
-/*********************************************************************
- *
- * File : $Source$
- *
- * Purpose : (Fill me in with a good description!)
- *
- * Copyright : Written by and Copyright (C) 2001 the SourceForge
- * Privoxy team. http://www.privoxy.org/
- *
- * Based on the Internet Junkbuster originally written
- * by and Copyright (C) 1997 Anonymous Coders and
- * Junkbusters Corporation. http://www.junkbusters.com
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will
- * be useful, but WITHOUT ANY WARRANTY; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A
- * PARTICULAR PURPOSE. See the GNU General Public
- * License for more details.
- *
- * The GNU General Public License should be included with
- * this file. If not, you can view it at
- * http://www.gnu.org/copyleft/gpl.html
- * or write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Revisions :
- * $Log$
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
- ... function headers here ...
-
-
-/* Revision control strings from this header and associated .c file */
-extern const char FILENAME_rcs[];
-extern const char FILENAME_h_rcs[];
-
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef _FILENAME_H */
-
-/*
- Local Variables:
- tab-width: 3
- end:
-*/
-
- Example for function comments:
-/*********************************************************************
- *
- * Function : FUNCTION_NAME
- *
- * Description : (Fill me in with a good description!)
- *
- * parameters :
- * 1 : param1 = pointer to an important thing
- * 2 : x = pointer to something else
- *
- * Returns : 0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int FUNCTION_NAME( void *param1, const char *x )
-{
- ...
- return( 0 );
-
-}
-
- Note: If we all follow this practice, we should be able to parse our
- code to create a "self-documenting" web page.
- _________________________________________________________________
-
+Example for file comments:
+
+const char FILENAME_rcs[] = "$Id: developer-manual.sgml,v 1.15 2002/03/30 22:29:47 swa Exp $";
+/*********************************************************************
+ *
+ * File : $Source$
+ *
+ * Purpose : (Fill me in with a good description!)
+ *
+ * Copyright : Written by and Copyright (C) 2001 the SourceForge
+ * Privoxy team. http://www.privoxy.org/
+ *
+ * Based on the Internet Junkbuster originally written
+ * by and Copyright (C) 1997 Anonymous Coders and
+ * Junkbusters Corporation. http://www.junkbusters.com
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will
+ * be useful, but WITHOUT ANY WARRANTY; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A
+ * PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * The GNU General Public License should be included with
+ * this file. If not, you can view it at
+ * http://www.gnu.org/copyleft/gpl.html
+ * or write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Revisions :
+ * $Log$
+ *
+ *********************************************************************/
+
+
+#include "config.h"
+
+ ...necessary include files for us to do our work...
+
+const char FILENAME_h_rcs[] = FILENAME_H_VERSION;
+
+Note: This declares the rcs variables that should be added to the
+"show-proxy-args" page. If this is a brand new creation by you, you are free to
+change the "Copyright" section to represent the rights you wish to maintain.
+
+Note: The formfeed character that is present right after the comment flower box
+is handy for (X|GNU)Emacs users to skip the verbige and get to the heart of the
+code (via `forward-page' and `backward-page'). Please include it if you can.
+
+Example for file header comments:
+
+#ifndef _FILENAME_H
+#define _FILENAME_H
+#define FILENAME_H_VERSION "$Id: developer-manual.sgml,v 1.15 2002/03/30 22:29:47 swa Exp $"
+/*********************************************************************
+ *
+ * File : $Source$
+ *
+ * Purpose : (Fill me in with a good description!)
+ *
+ * Copyright : Written by and Copyright (C) 2001 the SourceForge
+ * Privoxy team. http://www.privoxy.org/
+ *
+ * Based on the Internet Junkbuster originally written
+ * by and Copyright (C) 1997 Anonymous Coders and
+ * Junkbusters Corporation. http://www.junkbusters.com
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will
+ * be useful, but WITHOUT ANY WARRANTY; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A
+ * PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * The GNU General Public License should be included with
+ * this file. If not, you can view it at
+ * http://www.gnu.org/copyleft/gpl.html
+ * or write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Revisions :
+ * $Log$
+ *
+ *********************************************************************/
+
+
+#include "project.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+ ... function headers here ...
+
+
+/* Revision control strings from this header and associated .c file */
+extern const char FILENAME_rcs[];
+extern const char FILENAME_h_rcs[];
+
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* ndef _FILENAME_H */
+
+/*
+ Local Variables:
+ tab-width: 3
+ end:
+*/
+
+Example for function comments:
+
+/*********************************************************************
+ *
+ * Function : FUNCTION_NAME
+ *
+ * Description : (Fill me in with a good description!)
+ *
+ * parameters :
+ * 1 : param1 = pointer to an important thing
+ * 2 : x = pointer to something else
+ *
+ * Returns : 0 => Ok, everything else is an error.
+ *
+ *********************************************************************/
+int FUNCTION_NAME( void *param1, const char *x )
+{
+ ...
+ return( 0 );
+
+}
+
+Note: If we all follow this practice, we should be able to parse our code to
+create a "self-documenting" web page.
+
+-------------------------------------------------------------------------------
+
5. Version Control Guidelines
- To be filled. note on cvs comments. don't comment what you did,
- comment why you did it.
- _________________________________________________________________
-
+To be filled. note on cvs comments. don't comment what you did, comment why you
+did it.
+
+-------------------------------------------------------------------------------
+
6. Testing Guidelines
- To be filled.
- _________________________________________________________________
-
+To be filled.
+
+-------------------------------------------------------------------------------
+
6.1. Testplan for releases
- Explain release numbers. major, minor. developer releases. etc.
+Explain release numbers. major, minor. developer releases. etc.
+
+ 1. Remove any existing rpm with rpm -e
- 1. Remove any existing rpm with rpm -e
- 2. Remove any file that was left over. This includes (but is not
- limited to)
- + /var/log/privoxy
- + /etc/privoxy
- + /usr/sbin/privoxy
- + /etc/init.d/privoxy
- + /usr/doc/privoxy*
- 3. Install the rpm. Any error messages?
- 4. start,stop,status Privoxy with the specific script (e.g.
- /etc/rc.d/init/privoxy stop). Reboot your machine. Does autostart
- work?
- 5. Start browsing. Does Privoxy work? Logfile written?
- 6. Remove the rpm. Any error messages? All files removed?
- _________________________________________________________________
+ 2. Remove any file that was left over. This includes (but is not limited to)
+ + /var/log/privoxy
+
+ + /etc/privoxy
+
+ + /usr/sbin/privoxy
+
+ + /etc/init.d/privoxy
+
+ + /usr/doc/privoxy*
+
+ 3. Install the rpm. Any error messages?
+
+ 4. start,stop,status Privoxy with the specific script (e.g. /etc/rc.d/init/
+ privoxy stop). Reboot your machine. Does autostart work?
+
+ 5. Start browsing. Does Privoxy work? Logfile written?
+
+ 6. Remove the rpm. Any error messages? All files removed?
+
+-------------------------------------------------------------------------------
+
6.2. Test reports
- Please submit test reports only with the [59]test form at sourceforge.
- Three simple steps:
+Please submit test reports only with the test form at sourceforge. Three simple
+steps:
+
+ * Select category: the distribution you test on.
- * Select category: the distribution you test on.
- * Select group: the version of Privoxy that we are about to release.
- * Fill the Summary and Detailed Description with something
- intelligent (keep it short and precise).
-
- Do not mail to the mailinglist (we cannot keep track on issues there).
- _________________________________________________________________
+ * Select group: the version of Privoxy that we are about to release.
-7. Contact the developers
-
- Please see the user manual for information on how to contact the
- developers.
- _________________________________________________________________
+ * Fill the Summary and Detailed Description with something intelligent (keep
+ it short and precise).
-8. Copyright and History
+Do not mail to the mailinglist (we cannot keep track on issues there).
+
+-------------------------------------------------------------------------------
+
+7. Releasing a new version
+
+To minimize trouble with distribution contents, webpage errors and the like, I
+(Stefan) strongly encourage you to follow this section if you prepare a new
+release of code or new pages on the webserver.
+
+The following programs are required to follow this process: ncftpput (ncftp),
+scp (ssh), gmake (GNU's version of make), ???.
+
+-------------------------------------------------------------------------------
+
+7.1. Update the webserver
+
+All files must be group-readable and group-writable (or no one else will be
+able to change them). To update the webserver, create any pages locally in the
+doc/webserver directory (or create new directories under doc/webserver), then
+do
+
+ make webserver
+
+
+Note that make dok creates doc/webserver/user-manual, doc/webserver/
+developer-manual, doc/webserver/faq and doc/webserver/man-page automatically.
+
+Verify on the webserver that the permissions are set correctly. Do NOT use any
+other means of transferring files to the webserver.
+
+-------------------------------------------------------------------------------
+
+7.2. SuSE or RedHat
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Update the release number directly in the specific spec file
+(particularly, set the release number to 1 if you have increased the version
+number before). Run
+
+ autoheader && autoconf && ./configure
+
+
+Then do
+
+ make suse-dist or make redhat-dist
+
+
+To upload the package to Sourceforge, simply issue
+
+ make suse-upload or make redhat-upload
+
+
+Goto the displayed URL and release the file publically on Sourceforge.
+
+-------------------------------------------------------------------------------
+
+7.3. OS/2
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then do FIXME.
+
+-------------------------------------------------------------------------------
+
+7.4. Solaris
+
+Login to Sourceforge's compilefarm via ssh
+
+ ssh cf.sourceforge.net
+
+
+Choose the right operating system (not the Debian one). If you have downloaded
+Privoxy before,
+
+ cd current && cvs update .
+
+
+If not, please checkout Privoxy via CVS first. Verify the version number in
+configure.in. If necessary, change the version number. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then run
+
+ gmake solaris-dist
+
+
+which creates a gzip'ed tar archive. Sadly, you cannot use make solaris-upload
+on the Sourceforge machine (no ncftpput). You now have to manually upload the
+archive to Sourceforge's ftp server and release the file publically
+
+-------------------------------------------------------------------------------
+
+7.5. Windows
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then do FIXME.
+
+-------------------------------------------------------------------------------
+
+7.6. Debian
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then do FIXME.
+
+-------------------------------------------------------------------------------
+
+7.7. Mac OSX
+
+Login to Sourceforge's compilefarm via ssh
+
+ ssh cf.sourceforge.net
+
+
+Choose the right operating system. If you have downloaded Privoxy before,
+
+ cd current && cvs update .
+
+
+If not, please checkout Privoxy via CVS first. Verify the version number in
+configure.in. If necessary, change the version number. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then run
+
+ make macosx-dist
+
+
+which creates a gzip'ed tar archive. Sadly, you cannot use make macosx-upload
+on the Sourceforge machine (no ncftpput). You now have to manually upload the
+archive to Sourceforge's ftp server and release the file publically
+
+-------------------------------------------------------------------------------
+
+7.8. FreeBSD
+
+Change the version number of Privoxy in the configure.in file. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then ...
+
+Login to Sourceforge's compilefarm via ssh
+
+ ssh cf.sourceforge.net
+
+
+Choose the right operating system. If you have downloaded Privoxy before,
+
+ cd current && cvs update .
+
+
+If not, please checkout Privoxy via CVS first. Verify the version number in
+configure.in. If necessary, change the version number. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then run
+
+ gmake freebsd-dist
+
+
+which creates a gzip'ed tar archive. Sadly, you cannot use make freebsd-upload
+on the Sourceforge machine (no ncftpput). You now have to manually upload the
+archive to Sourceforge's ftp server and release the file publically
+
+-------------------------------------------------------------------------------
+
+7.9. Tarball
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Run
+
+ make clobber
+ autoheader && autoconf && ./configure
+
+
+Then do
+
+ make tarball-dist
+
+
+To upload the package to Sourceforge, simply issue
+
+ make tarball-upload
+
+
+Goto the displayed URL and release the file publically on Sourceforge.
+
+-------------------------------------------------------------------------------
+
+7.10. HP-UX 11
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then do FIXME.
+
+-------------------------------------------------------------------------------
+
+7.11. Amiga OS
+
+Ensure that you have the latest code version. Hence run
+
+ cvs update .
+
+
+first. If necessary, change the version number of Privoxy in the configure.in
+file. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then do FIXME.
+
+-------------------------------------------------------------------------------
+
+7.12. AIX
+
+Login to Sourceforge's compilefarm via ssh
+
+ ssh cf.sourceforge.net
+
+
+Choose the right operating system. If you have downloaded Privoxy before,
+
+ cd current && cvs update .
+
+
+If not, please checkout Privoxy via CVS first. Verify the version number in
+configure.in. If necessary, change the version number. Run
+
+ autoheader && autoconf && ./configure
+
+
+Then run
+
+ make aix-dist
+
+
+which creates a gzip'ed tar archive. Sadly, you cannot use make aix-upload on
+the Sourceforge machine (no ncftpput). You now have to manually upload the
+archive to Sourceforge's ftp server and release the file publically
+
+-------------------------------------------------------------------------------
+
+8. Contact the developers
+
+Please see the contact page in the user-manual for details.
+
+-------------------------------------------------------------------------------
+
+9. Copyright and History
+
+Please see the user-manual for information on Copyright and History.
+
+-------------------------------------------------------------------------------
+
+10. See also
+
+Please see the user-manual for others references.
- Please see the user manual for information on Copyright and History.
- _________________________________________________________________
-
-9. See also
-
- Please see the user manual for information on references.
-
-References
-
- 1. http://www.privoxy.org/developer-manual/
- 2. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#INTRODUCTION
- 3. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#QUICKSTART
- 4. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#DOCUMENTATION
- 5. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#CODING
- 6. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S1
- 7. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S2
- 8. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S3
- 9. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S4
- 10. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S5
- 11. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S6
- 12. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S7
- 13. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S8
- 14. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S9
- 15. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S10
- 16. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S11
- 17. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S12
- 18. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S13
- 19. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S14
- 20. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S15
- 21. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S16
- 22. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S17
- 23. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S18
- 24. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S19
- 25. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S20
- 26. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S21
- 27. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S22
- 28. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S23
- 29. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S24
- 30. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S25
- 31. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S26
- 32. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S27
- 33. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S28
- 34. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S29
- 35. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S30
- 36. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S31
- 37. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S32
- 38. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S33
- 39. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S34
- 40. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S35
- 41. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S36
- 42. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S37
- 43. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S38
- 44. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S39
- 45. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S40
- 46. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S41
- 47. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S42
- 48. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S43
- 49. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S44
- 50. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S45
- 51. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#S46
- 52. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#CVS
- 53. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#TESTING
- 54. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#TESTING-PLAN
- 55. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#TESTING-REPORT
- 56. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#CONTACT
- 57. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#COPYRIGHT
- 58. file://localhost/home/swa/sf/current-org/doc/source/tmp.html#SEEALSO
- 59. http://sourceforge.net/tracker/?func=add&group_id=11118&atid=395005