1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.33 2002/03/27 03:05:35 hal9 Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Version number (for RPM)
33 #############################################################################
35 VERSION_MAJOR = @VERSION_MAJOR@
36 VERSION_MINOR = @VERSION_MINOR@
37 VERSION_POINT = @VERSION_POINT@
38 CODE_STATUS = @CODE_STATUS@
39 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
40 # will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
41 RPM_VERSION = $(VERSION)
42 RPM_PACKAGEV = @VERSION_RPM_PACKAGE@
45 #############################################################################
46 # Directories for "make install"
47 #############################################################################
49 DEST = @sysconfdir@/privoxy
54 #############################################################################
56 #############################################################################
58 PROGRAM = privoxy@EXEEXT@
75 DB = $(JADEBIN) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
80 # Program to do LF->CRLF
82 # The sed version should be the most portable, but it doesn't for for me,
83 # the other two do. FIXME.
85 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
86 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
87 DOSFILTER = perl -p -e 's/\n/\r\n/'
89 #############################################################################
90 # Setup for make distribution rh and suse for now
91 #############################################################################
93 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
96 #############################################################################
97 # Filenames and libraries
98 #############################################################################
100 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
101 errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
102 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
105 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
106 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
108 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
109 W32_FILES = @WIN_ONLY@w32.res
110 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
111 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
112 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
113 W32_INIS = @WIN_ONLY@config.txt trust.txt
115 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
116 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
117 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
119 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
120 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
121 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
123 # No REGEX (Either because dynamically linked pcreposix, or no regex at all):
126 @GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c
128 @PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
130 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
131 REGEX_HDRS = $(REGEX_SRC:.c=.h)
133 # Dependencies introduced by #include "project.h".
134 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
136 # Socket libraries for platforms that need them explicitly defined
137 SOCKET_LIB = @SOCKET_LIB@
139 # PThreads library, if needed.
140 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
142 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
143 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
144 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
145 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
148 #############################################################################
150 #############################################################################
152 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
153 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
155 # The flag "-pthread" is required if using Pthreads under Linux (and
156 # possibly other OSs).
157 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
159 # Add your flags here
162 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
163 @STATIC_PCRE_ONLY@ -Ipcre
165 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
168 #############################################################################
171 # There should NOT be any targets above this line.
172 #############################################################################
176 #############################################################################
178 #############################################################################
179 .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
180 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
184 #############################################################################
185 # Define this explicitly because Solaris is broken!
186 #############################################################################
188 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
191 #############################################################################
193 #############################################################################
195 inifiles: $(W32_INIS)
198 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
199 -e 's!\jarfile jarfile!jarfile jar.log!' \
200 -e 's!\logfile logfile!logfile privoxy.log!' \
201 -e 's!#Win32-only: !!' \
204 # LF to CRLF in default.action
205 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
206 # LF to CRLF in default.filter
207 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
210 $(DOSFILTER) < $< > $@
212 re_filterfile.txt: re_filterfile
213 $(DOSFILTER) < $< > $@
216 #############################################################################
217 # redhat distribution alpha and x86
218 #############################################################################
221 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
222 if [ ! -w $(RPM_BASE)/$$dir ]; then \
223 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
224 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
225 $(ECHO) "%_topdir /home/foo/rpm-build"; \
231 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
233 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
234 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
235 -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
236 privoxy-rh.spec > $$TMPFILE ; then \
237 $(MV) -f $$TMPFILE privoxy-rh.spec; \
239 $(ECHO) "Could not set version info in specfile."; \
243 $(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
244 $(RPM) --clean -ta $(TAR_ARCH)
245 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
248 # anonymously ncftps the rpms to sourceforge
251 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
252 # better should use `arch` here instead of ix86 to support other platforms too
253 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
254 @$(ECHO) -------------------------------------------------------
256 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
257 @$(ECHO) ... and release the files.
258 @$(ECHO) -------------------------------------------------------
259 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
261 #############################################################################
262 # sun solaris distribution
263 #############################################################################
265 @$(ECHO) coming soon.
267 @$(ECHO) coming soon.
269 #############################################################################
271 #############################################################################
273 @$(ECHO) coming soon.
275 @$(ECHO) coming soon.
277 #############################################################################
278 # debian distribution
279 #############################################################################
281 @$(ECHO) coming soon.
283 @$(ECHO) coming soon.
285 #############################################################################
286 # macosx distribution
287 #############################################################################
289 @$(ECHO) coming soon.
291 @$(ECHO) coming soon.
293 #############################################################################
295 #############################################################################
297 @$(ECHO) coming soon.
299 @$(ECHO) coming soon.
301 #############################################################################
302 # suse distribution. works fine. no need to be root.
303 #############################################################################
305 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
306 if [ ! -w $(RPM_BASE)/$$dir ]; then \
307 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
308 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
309 $(ECHO) "%_topdir /home/foo/rpm-build"; \
315 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
317 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
318 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
319 -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
320 privoxy-suse.spec > $$TMPFILE ; then \
321 $(MV) -f $$TMPFILE privoxy-suse.spec; \
323 $(ECHO) "Could not set version info in specfile."; \
327 $(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
328 $(RPM) --clean -ta $(TAR_ARCH)
329 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
332 # anonymously ncftps the rpms to sourceforge
335 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
336 # better should use `arch` here instead of ix86 to support other platforms too
337 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
338 @$(ECHO) -------------------------------------------------------
340 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
341 @$(ECHO) ... and release the files.
342 @$(ECHO) -------------------------------------------------------
344 # handle with care. use with root.
346 rpm -e junkbuster-suse || true
347 rm -rf /etc/junkbuster
348 rm -rf /etc/rc.d/junkbuster*
349 rm -rf /var/run/junkbuster.pid
350 rm -rf /var/log/junkbuster
351 rm -f /etc/init.d/junkbuster
352 rm -f /usr/sbin/junkbuster
353 rm -f /usr/sbin/rcjunkbuster
354 rm -f /usr/share/man/man1/junkbuster.1.gz
355 rpm -e privoxy-suse || true
357 rm -rf /etc/rc.d/privoxy*
358 rm -rf /var/run/privoxy.pid
359 rm -rf /var/log/privoxy
360 rm -f /etc/init.d/privoxy
361 rm -f /usr/sbin/privoxy
362 rm -f /usr/sbin/rcprivoxy
363 rm -f /usr/share/man/man1/privoxy.1.gz
365 #############################################################################
366 # Windows distribution
367 #############################################################################
369 $(ECHO) Not implemented.
372 #############################################################################
373 # Tarball distribution
374 #############################################################################
375 tarball-dist: clobber
376 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
377 $(TAR) -C.. --exclude "CVS" --exclude "#*" --exclude ".#*" --exclude ".cvsignore" -cvhzf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz privoxy-$(VERSION)-$(CODE_STATUS)
378 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
379 @$(ECHO) Tarball (with any binary) created.
381 # anonymously ncftps the tarball to sourceforge
383 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
384 @$(ECHO) -------------------------------------------------------
386 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
387 @$(ECHO) ... and release the files.
388 @$(ECHO) -------------------------------------------------------
392 $(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
394 #############################################################################
398 # converts doc/source/*.sgml into html, text and man pages
400 #############################################################################
401 dok: doc/source/ldpOK.dsl man2html-swa
402 mkdir -p doc/text doc/man
404 rm -rf doc/webserver/user-manual
405 cd doc/source && $(DB2HTML) -s ldpOK.dsl user-manual.sgml && mv user-manual ../webserver
406 cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
408 rm -rf doc/webserver/developer-manual
409 cd doc/source && $(DB2HTML) -s ldpOK.dsl developer-manual.sgml && mv developer-manual ../webserver
410 cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
412 rm -rf doc/webserver/faq
413 cd doc/source && $(DB2HTML) -s ldpOK.dsl faq.sgml && mv faq ../webserver
414 cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq
417 if [ "$(MAN2HTML)" != "false" ]; then \
418 mkdir -p doc/webserver/man-page; \
419 $(ECHO) "<html><head><title>Privoxy|Doc/Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
420 man ./privoxy.1 | $(MAN2HTML) -bare \
421 >> doc/webserver/man-page/privoxy-man-page.html; \
422 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
425 redhat-dok: doc/source/ldpOK.dsl man2html
426 mkdir -p doc/text doc/man doc/source/user-manual \
427 doc/source/developer-manual doc/source/faq
429 rm -rf doc/webserver/user-manual
430 cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
431 mv user-manual ../webserver
432 cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
433 $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
436 rm -rf doc/webserver/developer-manual
437 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
438 cd .. && mv developer-manual ../webserver
439 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
440 $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
443 rm -rf doc/webserver/faq
444 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
445 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
446 tmp.html > ../text/faq.txt && rm -rf tmp.html faq
448 doc/source/ldpOK.dsl:
449 if [ "$(DKPREFIX)" != "none" ]; then \
450 sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
452 cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
456 if [ "$(MAN2HTML)" != "false" ]; then \
457 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html; \
460 #############################################################################
464 # moves dokumentation to webserver
466 #############################################################################
468 @$(ECHO) -------------------------------------------------------
469 @$(ECHO) You have run make dok/redhat-dok before, right?
470 @$(ECHO) Note that this command scps all stuff to the webserver,
471 @$(ECHO) it will not remove obsolete documents.
472 @$(ECHO) -------------------------------------------------------
473 chmod -R a+r doc/webserver
474 find doc/webserver -type d -exec chmod a+rx {} \;
475 cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
477 #############################################################################
478 # Source file dependencies
479 #############################################################################
481 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
482 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
483 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
484 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
485 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
486 encode.@OBJEXT@: encode.c encode.h config.h
487 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
488 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
489 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
490 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
491 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
492 killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
493 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
494 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
495 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
496 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
497 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
498 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
499 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
502 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
505 pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
508 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
509 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
510 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
511 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
512 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
514 # An auxiliary program makes the PCRE default character table source
516 pcre/chartables.c: pcre/dftables@EXEEXT@
517 pcre/dftables@EXEEXT@ >pcre/chartables.c
519 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
520 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
523 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
524 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
525 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
527 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
528 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
531 @AMIGAOS_ONLY@OBJS += amiga.o
532 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
533 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
534 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
535 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
538 $(PROGRAM): $(OBJS) $(W32_FILES)
539 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
542 $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) junkbuster
545 $(RM) $(PROGRAM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` `find . -name TAGS` config.status config.h.in config.log junkbuster.log privoxy.log config.cache *~ *.tar.gz configure
547 tags: $(SRCS) $(HDRS)
548 etags $(SRCS) $(HDRS)
552 # FIXME: This is a dirty hack to have an install target
553 # that works at least for some setups. This needs
556 $(STRIP_PROG) $(PROGRAM)
557 $(INSTALL) $(PROGRAM) $(SBIN_DEST)
558 mkdir -p $(DEST)/user-manual
559 mkdir -p $(DEST)/templates
560 cp -r doc/webserver/user-manual $(DEST)
561 cp -r templates $(DEST)
562 $(INSTALL) config default.action default.filter trust $(DEST)
563 # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
564 # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
565 $(INSTALL) privoxy.init /etc/init.d/privoxy
568 #############################################################################
574 # $Log: GNUmakefile.in,v $
575 # Revision 1.33 2002/03/27 03:05:35 hal9
576 # Added man2html target for docs (redhat-dok only for now)
578 # Revision 1.32 2002/03/26 22:29:54 swa
579 # we have a new homepage!
581 # Revision 1.31 2002/03/26 14:00:18 swa
582 # fixed make tarball, tarball-dist, tarball-clean
584 # Revision 1.30 2002/03/25 12:52:25 swa
587 # Revision 1.29 2002/03/24 17:03:55 jongfoster
590 # Revision 1.28 2002/03/24 16:19:48 swa
591 # configure needs to be generated.
593 # Revision 1.27 2002/03/24 16:13:57 swa
594 # generated files are a nono in cvs
596 # Revision 1.26 2002/03/24 15:36:02 swa
599 # Revision 1.25 2002/03/24 14:31:08 swa
600 # remove more crappy files. set RPM
601 # release version correctly.
603 # Revision 1.24 2002/03/24 14:19:55 swa
604 # set rpm package release in configure.in. nowhere else.
606 # Revision 1.23 2002/03/24 13:06:49 swa
607 # suse-clean now runs fine
609 # Revision 1.22 2002/03/24 12:56:21 swa
610 # name change related issues.
612 # Revision 1.21 2002/03/24 12:43:57 swa
615 # Revision 1.20 2002/03/24 11:39:17 jongfoster
616 # Renaming config files
618 # Revision 1.19 2002/03/22 20:53:03 morcego
619 # - Ongoing process to change name to JunkbusterNG
620 # - configure/configure.in: no change needed
622 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
623 # - PROGRAM = jbng@EXEEXT@
624 # - rh-spec now references as junkbusterng-rh.spec
625 # - redhat-upload: references changed to junkbusterng-* (package names)
626 # - tarball-dist: references changed to JunkbusterNG-distribution-*
627 # - tarball-src: now JunkbusterNG-*
628 # - install: initscript now junkbusterng.init and junkbusterng (when
630 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
631 # - junkbusterng.spec:
632 # - References to the expression ijb where changed where possible
633 # - New package name: junkbusterng (all in lower case, acording to
634 # the LSB recomendation)
635 # - Version changed to: 2.9.13
637 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
638 # right. If it obsoletes, why conflict ? Have to check it later)
639 # - Summary changed: Stefan, please check and aprove it
640 # - Changes description to use the new name
641 # - Sed string was NOT changed. Have to wait to the manpage to
643 # - Keeping the user junkbuster for now. It will require some aditional
644 # changes on the script (scheduled for the next specfile release)
645 # - Added post entry to move the old logfile to the new log directory
646 # - Removing "chkconfig --add" entry (not good to have it automaticaly
647 # added to the startup list).
648 # - Added preun section to stop the service with the old name, as well
649 # as remove it from the startup list
650 # - Removed the chkconfig --del entry from the conditional block on
651 # the preun scriptlet (now handled on the %files section)
652 # - junkbuster.init: renamed to junkbusterng.init
653 # - junkbusterng.init:
654 # - Changed JB_BIN to jbng
655 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
656 # be used where necessary (config dir)
659 # - The config directory is /etc/junkbuster yet. Have to change it on the
660 # specfile, after it is changes on the code
661 # - The only files that got renamed on the cvs tree were the rh specfile and
662 # the init file. Some file references got changes on the makefile and on the
663 # rh-spec (as listed above)
665 # Revision 1.18 2002/03/21 23:00:00 swa
666 # want to autogenerate stuff.
668 # Revision 1.17 2002/03/19 19:30:04 morcego
669 # - Fixing stylesheet checking on configure. If it is found, no further checks
672 # - configure will now check for db2html or docbook2html (should work now
673 # on SuSe without the docbktls package)
675 # Revision 1.16 2002/03/14 22:32:32 hal9
676 # Bumped the RPM version.
678 # Revision 1.15 2002/03/08 20:00:28 swa
681 # Revision 1.14 2002/03/07 18:25:56 swa
682 # synced redhat and suse build process
684 # Revision 1.13 2002/03/07 17:17:56 oes
685 # (Hopefully) fixed for older make versions
687 # Revision 1.12 2002/03/07 15:28:27 swa
690 # Revision 1.11 2002/03/06 14:33:18 sarantis
691 # Use proper temp file, not "abc".
693 # Revision 1.10 2002/03/06 14:19:35 sarantis
694 # Cleanup PID_FILE_PATH from redhat-dist target
696 # Revision 1.9 2002/03/05 17:31:11 morcego
697 # Search for docbook.dsl. Should solve portability problems for SuSe.
699 # Revision 1.8 2002/03/05 14:07:42 morcego
700 # configure now detects rpm topdir, and change GNUmakefile acordingly
701 # (based on sugestion by Sarantis Paskalis)
703 # Revision 1.7 2002/03/05 13:43:28 morcego
704 # Checking for text browser, so redhat-dok can work.
706 # Revision 1.6 2002/03/05 13:10:51 morcego
707 # Changes to implement redhat-dok (Hal Burgiss)
708 # Changes to make it work on other distros and out-of-the-shelf configurations
710 # Revision 1.5 2002/02/27 15:30:39 hal9
711 # Reset $(RPM_PACKAGEV) to 1 (was 2)
713 # Revision 1.4 2002/01/17 21:44:04 jongfoster
714 # Adding urlmatch.[ch]
716 # Revision 1.3 2002/01/04 15:26:08 oes
717 # Added tarball-src target
719 # Revision 1.2 2001/12/30 14:07:31 steudten
720 # - Add signal handling (unix)
721 # - Add SIGHUP handler (unix)
722 # - Add creation of pidfile (unix)
723 # - Add action 'top' in rc file (RH)
724 # - Add entry 'SIGNALS' to manpage
725 # - Add exit message to logfile (unix)
727 # Revision 1.1 2001/12/01 11:22:57 jongfoster
728 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
729 # make break in a more obvious way.
730 # Adding .PHONY section.
732 # Revision 1.40 2001/12/01 00:24:11 jongfoster
733 # Renaming various config files
734 # Fixing CR->CRLF under Win32 (I hope)
736 # Revision 1.39 2001/11/06 12:07:30 steudten
737 # Add --clean for building rpm in target redhat-dist.
739 # Revision 1.38 2001/11/05 21:35:23 steudten
740 # Complete rewrite for the 'redhat-dist' target.
741 # Checks for writeable RPM build directories for calling user.
742 # So you must not be root, just set the modes to 1777 to
743 # build a RH package.
744 # Fix the upload-target to be arch independant.
745 # Add target for 'solaris-dist' - coming soon.
747 # Revision 1.37 2001/11/01 00:52:04 hal9
748 # Redhat-upload stuff per Stefan.
750 # Revision 1.36 2001/10/31 19:26:13 swa
751 # automate process of uploading new releases
754 # Revision 1.35 2001/10/15 22:14:59 joergs
755 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
756 # the general CFLAGS already.
758 # Revision 1.34 2001/10/15 18:28:06 steudten
759 # remove config.cache for target clobber.
760 # Cleanup make dist for RH and S.u.S.E.
762 # Revision 1.33 2001/10/10 12:43:33 oes
763 # Added ugly hack to make install target work at least for some setups.
765 # Revision 1.32 2001/10/09 22:38:19 jongfoster
766 # Correcting actionsfile filename for Win32 INI build
768 # Revision 1.31 2001/09/23 10:13:48 swa
769 # upload process established. run make webserver and
770 # the documentation is moved to the webserver. documents
771 # are now linked correctly.
773 # Revision 1.30 2001/09/19 17:55:49 oes
776 # Revision 1.29 2001/09/16 17:34:27 jongfoster
777 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
778 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
781 # Revision 1.28 2001/09/13 15:19:08 swa
782 # we want text files as well.
784 # Revision 1.27 2001/09/13 13:11:37 steudten
786 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
788 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
789 # Mac OSX (Darwin) support added.
791 # Revision 1.25 2001/09/12 22:55:45 joergs
792 # AmigaOS support added.
794 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
796 # OS/2 port: update autoconf'd support for the platform.
798 # Revision 1.23 2001/09/12 16:28:42 swa
799 # added "make dok" section to generate html pages from
800 # the sgml source documents. note that the we do not want
801 # generated stuff in cvs.
803 # Revision 1.22 2001/09/10 16:31:23 swa
804 # buildroot definition in the specfile fucks up the build
805 # process under suse. hence I moved it to the "rpm -ta"
808 # Revision 1.21 2001/09/10 11:12:49 oes
811 # Revision 1.20 2001/08/02 22:04:29 jongfoster
812 # Removing some remaining references to obsolete w32rulesdlg.[ch]
814 # Revision 1.19 2001/07/30 22:14:03 jongfoster
815 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
817 # Revision 1.18 2001/07/29 17:09:17 jongfoster
818 # Major changes to build system in order to fix these bugs:
819 # - pthreads under Linux was broken - changed -lpthread to -pthread
820 # - Compiling in MinGW32 mode under CygWin now correctly detects
821 # which shared libraries are available
822 # - Solaris support (?) (Not tested under Solaris yet)
824 # Revision 1.17 2001/07/28 16:44:54 oes
825 # Fixed sed LF->CRLF conversion and removed deprecated files
827 # Revision 1.16 2001/07/15 19:45:33 jongfoster
828 # Added support for linking with POSIX threads library
830 # Revision 1.15 2001/07/13 13:48:07 oes
831 # - Moved STATIC #define for pcre to (ac)config.h
832 # - Made -Ipcre depandant on static pcre compilation to
833 # avoid version conflicts
834 # - Included compilation and depandancies for new deanimate.c
835 # - Made changes to the pcre/pcreposix/pcrs build process
836 # as required by the new library autodetection in
839 # Revision 1.14 2001/07/01 16:27:44 oes
840 # Fixed misplaced dependancy
842 # Revision 1.13 2001/06/29 13:18:36 oes
843 # - added depandancy of filters.o on cgi.h
845 # Revision 1.12 2001/06/12 17:15:56 swa
846 # fixes, because a clean build on rh6.1 was impossible.
847 # GZIP confuses make, %configure confuses rpm, etc.
849 # Revision 1.11 2001/06/11 11:26:35 sarantis
850 # RPM version should be the same as ijbswa version. The rpm release is
851 # specified in the specfile.
853 # Revision 1.10 2001/06/07 17:27:45 swa
854 # added suse build section
856 # Revision 1.9 2001/06/04 18:31:58 swa
857 # files are now prefixed with either `confdir' or `logdir'.
858 # `make redhat-dist' replaces both entries confdir and logdir
861 # Revision 1.8 2001/06/04 10:44:57 swa
862 # `make redhatr-dist' now works. Except for the paths
863 # in the config file.
865 # Revision 1.7 2001/06/03 17:09:09 swa
866 # swa for oes: reversed my earlier change
868 # Revision 1.6 2001/06/03 17:07:27 swa
871 # Revision 1.5 2001/06/03 13:57:26 swa
872 # compile cgi.c (for andreas' GUI)
874 # Revision 1.4 2001/05/31 21:18:45 jongfoster
875 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
877 # Revision 1.3 2001/05/29 20:02:48 joergs
878 # Changes for AmigaOS added.
880 # Revision 1.2 2001/05/17 22:23:23 oes
881 # - Added auto-generation of CRLFs for Win32 config files
882 # - Added comment-prefix to all Win32-only options in the config file
883 # and provided auto stripping of this prefix for the Win32 platform by make
885 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
886 # Initial import of version 2.9.3 source tree