1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.65 2002/04/06 05:16:39 hal9 Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 # will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
46 RPM_VERSION = $(VERSION)
47 RPM_PACKAGEV = @VERSION_RPM_PACKAGE@
50 #############################################################################
51 # Directories for "make install"
52 #############################################################################
55 CONFDEST = @prefix@@sysconfdir@
56 SBIN_DEST = @prefix@@sbindir@
57 MAN_DEST = @prefix@@mandir@
60 #############################################################################
62 #############################################################################
64 PROGRAM = privoxy@EXEEXT@
70 INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
71 INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
72 INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
85 DB = $(JADEBIN) $(JADECAT) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
89 G2H_CMD = groff -mandoc -Thtml
97 # Program to do LF->CRLF
99 # The sed version should be the most portable, but it doesn't for for me,
100 # the other two do. FIXME.
102 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
103 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
104 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
106 #############################################################################
107 # Setup for make distribution rh and suse for now
108 #############################################################################
110 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
111 RPM_BASE = @RPM_BASE@
113 #############################################################################
114 # We include these files in our distributions
115 #############################################################################
116 # take care that no CVS .cvsignore or other crappy files
118 # and escape every '#' in the find. doh.
119 CONFIG_FILES = config trust \
121 basic.action intermediate.action advanced.action \
123 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
125 DOC_FILES = AUTHORS LICENSE README ChangeLog \
126 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` privoxy.1
128 #############################################################################
129 # Filenames and libraries
130 #############################################################################
132 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
133 errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
134 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
137 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
138 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
140 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
141 W32_FILES = @WIN_ONLY@w32.res
142 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
143 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
144 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
145 W32_INIS = @WIN_ONLY@config.txt trust.txt
147 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
148 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
149 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
151 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
152 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
153 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
155 # No REGEX (maybe because dynamically linked pcreposix):
157 @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
159 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
160 REGEX_HDRS = $(REGEX_SRC:.c=.h)
162 # Dependencies introduced by #include "project.h".
163 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
165 # Socket libraries for platforms that need them explicitly defined
166 SOCKET_LIB = @SOCKET_LIB@
168 # PThreads library, if needed.
169 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
171 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
172 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
173 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
174 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
177 #############################################################################
179 #############################################################################
181 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
182 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
184 # The flag "-pthread" is required if using Pthreads under Linux (and
185 # possibly other OSs).
186 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
188 # Add your flags here
191 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
192 @STATIC_PCRE_ONLY@ -Ipcre
194 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
197 #############################################################################
200 # There should NOT be any targets above this line.
201 #############################################################################
205 #############################################################################
207 #############################################################################
208 .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
209 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
213 #############################################################################
214 # Define this explicitly because Solaris is broken!
215 #############################################################################
217 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
220 #############################################################################
222 #############################################################################
224 inifiles: $(W32_INIS)
227 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
228 -e 's!\jarfile jarfile!jarfile jar.log!' \
229 -e 's!\logfile logfile!logfile privoxy.log!' \
230 -e 's!#Win32-only: !!' \
233 # LF to CRLF in default.action
234 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
235 # LF to CRLF in default.filter
236 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
239 $(DOSFILTER) < $< > $@
241 re_filterfile.txt: re_filterfile
242 $(DOSFILTER) < $< > $@
244 #############################################################################
245 # RPM specifice stuff (SuSE or Redhat, ..)
246 #############################################################################
247 rpm-stuff: clean clobber
248 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
249 if [ ! -w $(RPM_BASE)/$$dir ]; then \
250 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
251 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
252 $(ECHO) "%_topdir /home/foo/rpm-build"; \
257 #############################################################################
258 # redhat distribution alpha and x86
259 #############################################################################
260 redhat-dist: rpm-stuff
261 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
262 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
263 -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
264 privoxy-rh.spec > $$TMPFILE ; then \
265 $(MV) -f $$TMPFILE privoxy-rh.spec; \
267 $(ECHO) "Could not set version info in specfile."; \
271 $(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
272 $(RPM) --clean -ta $(TAR_ARCH)
273 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
275 # anonymously ncftps the rpms to sourceforge
277 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
278 # better should use `arch` here instead of ix86 to support other platforms too
279 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
280 @$(ECHO) -------------------------------------------------------
282 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
283 @$(ECHO) ... and release the files.
284 @$(ECHO) -------------------------------------------------------
285 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
287 #############################################################################
288 # suse distribution. works fine. no need to be root.
289 #############################################################################
291 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
292 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
293 -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
294 privoxy-suse.spec > $$TMPFILE ; then \
295 $(MV) -f $$TMPFILE privoxy-suse.spec; \
297 $(ECHO) "Could not set version info in specfile."; \
301 $(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
302 $(RPM) --clean -ta $(TAR_ARCH)
303 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
305 # anonymously ncftps the rpms to sourceforge
307 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
308 # better should use `arch` here instead of ix86 to support other platforms too
309 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
310 @$(ECHO) -------------------------------------------------------
312 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
313 @$(ECHO) ... and release the files.
314 @$(ECHO) -------------------------------------------------------
316 # handle with care. use with root.
318 rpm -e junkbuster-suse || true
319 rm -rf /etc/junkbuster
320 rm -rf /etc/rc.d/junkbuster*
321 rm -rf /var/run/junkbuster.pid
322 rm -rf /var/log/junkbuster
323 rm -f /etc/init.d/junkbuster
324 rm -f /usr/sbin/junkbuster
325 rm -f /usr/sbin/rcjunkbuster
326 rm -f /usr/share/man/man1/junkbuster.1.gz
327 rpm -e privoxy-suse || true
329 rm -rf /etc/rc.d/privoxy*
330 rm -rf /var/run/privoxy.pid
331 rm -rf /var/log/privoxy
332 rm -f /etc/init.d/privoxy
333 rm -f /usr/sbin/privoxy
334 rm -f /usr/sbin/rcprivoxy
335 rm -f /usr/share/man/man1/privoxy.1.gz
337 #############################################################################
338 # generic distribution
339 #############################################################################
342 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
345 $(STRIP_PROG) $(PROGRAM)
346 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
348 (cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
350 for foo in $(CONFIG_FILES); do \
351 (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
354 for foo in $(DOC_FILES); do \
355 (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
357 # and zip the archive
358 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
359 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
360 @$(ECHO) Distribution with binary created.
362 # anonymously ncftps the package to sourceforge
364 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
365 @$(ECHO) -------------------------------------------------------
367 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
368 @$(ECHO) ... and release the files.
369 @$(ECHO) -------------------------------------------------------
373 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
375 #############################################################################
376 # solaris distribution. verified on SF machines by swa.
377 #############################################################################
378 solaris-dist: gen-dist
380 # anonymously ncftps the package to sourceforge
381 solaris-upload: gen-upload
384 solaris-clean: gen-clean
387 #############################################################################
389 #############################################################################
391 @$(ECHO) coming soon.
393 @$(ECHO) coming soon.
395 #############################################################################
396 # debian distribution
397 #############################################################################
399 @$(ECHO) coming soon.
401 @$(ECHO) coming soon.
403 #############################################################################
404 # macosx distribution
405 #############################################################################
407 @$(ECHO) coming soon.
409 @$(ECHO) coming soon.
411 #############################################################################
413 #############################################################################
415 @$(ECHO) coming soon.
417 @$(ECHO) coming soon.
419 #############################################################################
420 # freebsd distribution. verified on SF machines by swa.
421 #############################################################################
422 freebsd-dist: gen-dist
424 # anonymously ncftps the package to sourceforge
425 freebsd-upload: gen-upload
428 freebsd-clean: gen-clean
431 #############################################################################
432 # Windows distribution
433 #############################################################################
435 $(ECHO) Not implemented.
438 #############################################################################
439 # Tarball distribution. Only source files. No binaries.
440 #############################################################################
442 MISC_FILES = install-sh config.sub configure.in GNUmakefile.in config.h.in config.guess privoxy*
445 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
447 for foo in `find . -name "*.c"`; do \
448 (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
451 for foo in `find . -name "*.h"`; do \
452 (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
455 for foo in $(CONFIG_FILES); do \
456 (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
459 for foo in $(MISC_FILES); do \
460 (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
463 for foo in $(DOC_FILES); do \
464 (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
466 # and zip the archive
467 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
468 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
469 @$(ECHO) Tarball distribution created.
471 # anonymously ncftps the tarball to sourceforge
473 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
474 @$(ECHO) -------------------------------------------------------
476 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
477 @$(ECHO) ... and release the files.
478 @$(ECHO) -------------------------------------------------------
482 $(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
484 #############################################################################
488 # converts doc/source/*.sgml into html, text and man pages
490 #############################################################################
493 doc/source/ldpOK.dsl:
494 if [ "$(DKPREFIX)" != "none" ]; then \
495 sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
497 cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
500 # Otherwise we get plain groff conversion.
502 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
505 dok-devel: doc/source/ldpOK.dsl
506 rm -rf doc/webserver/developer-manual doc/source/developer-manual
507 mkdir -p doc/text doc/source/developer-manual
508 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && mv developer-manual ../webserver
509 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
512 dok-user: doc/source/ldpOK.dsl
513 rm -rf doc/webserver/user-manual doc/source/user-manual
514 mkdir -p doc/text doc/source/user-manual
515 cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && mv user-manual ../webserver
516 cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
519 dok-faq: doc/source/ldpOK.dsl
520 rm -rf doc/webserver/faq doc/source/faq
521 mkdir -p doc/text doc/source/faq
522 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
523 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && rm -rf tmp.html faq
526 dok-man: doc/source/ldpOK.dsl
527 rm -rf doc/man doc/webserver/man-page
528 mkdir -p doc/man -p doc/webserver/man-page
529 ifneq ($(MAN2HTML),false)
530 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
531 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
532 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
538 dok-readme: doc/source/ldpOK.dsl
539 cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html &&\
540 $(WDUMP) tmp.html > ../../README && rm -rf tmp.html
542 dok: dok-devel dok-user dok-faq dok-man dok-readme
543 # kludge to force recreation on next run. Rodgrigo?
544 @rm -f doc/source/ldpOK.dsl
545 @$(ECHO) Documentation created.
548 # an alternative to the above dok
550 redhat-dok: doc/source/ldpOK.dsl man2html
551 mkdir -p doc/text doc/man doc/source/user-manual \
552 doc/source/developer-manual doc/source/faq
554 rm -rf doc/webserver/user-manual
555 cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
556 mv user-manual ../webserver
557 cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
558 $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
561 rm -rf doc/webserver/developer-manual
562 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
563 cd .. && mv developer-manual ../webserver
564 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
565 $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
568 rm -rf doc/webserver/faq
569 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
570 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
571 tmp.html > ../text/faq.txt && rm -rf tmp.html faq
573 $(MAKE) redhat-readme
574 # kludge to force recreation on next run. Rodgrigo?
575 @rm -f doc/source/ldpOK.dsl
577 # For those with man2html ala RH7's.
579 mkdir -p doc/webserver/man-page
580 ifneq ($(MAN2HTML),false)
581 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html
582 $(PERL) -pi -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' doc/webserver/man-page/privoxy-man-page.html
588 redhat-readme: doc/source/ldpOK.dsl
589 cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \
590 tmp.html > ../../README && rm -rf tmp.html
591 # kludge to force recreation on next run. Rodgrigo?
592 @rm -f doc/source/ldpOK.dsl
594 #### WIP targets HB ##################
596 authors: doc/source/ldpOK.dsl
597 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
598 tmp.html > ../../AUTHORS && rm -f tmp.html
599 # kludge to force recreation on next run. Rodgrigo?
600 @rm -f doc/source/ldpOK.dsl
602 # make a man page, and then (lousy) HTML version.
603 man: doc/source/ldpOK.dsl
604 mkdir -p doc/source/man
605 cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
606 $(PERL) -pi -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1
607 cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\
608 mv -f index.html privoxy-man-page.html
609 # kludge to force recreation on next run. Rodgrigo?
610 @rm -f doc/source/ldpOK.dsl
612 #############################################################################
616 # moves dokumentation to webserver
618 #############################################################################
620 @$(ECHO) -------------------------------------------------------
621 @$(ECHO) You have run make dok/redhat-dok before, right?
622 @$(ECHO) Note that this command scps all stuff to the webserver,
623 @$(ECHO) it will not remove obsolete documents.
624 @$(ECHO) -------------------------------------------------------
628 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
629 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xv'
631 @$(ECHO) Fixing permissions
632 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type d | xargs chmod 775 2>/dev/null'
633 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type f | xargs chmod 664 2>/dev/null'
637 @cd doc/webserver/actions; \
638 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
639 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xv'
641 @$(ECHO) Fixing permissions
642 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/* -type f | xargs chmod 664 2>/dev/null'
644 #############################################################################
645 # Source file dependencies
646 #############################################################################
648 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
649 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
650 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
651 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
652 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
653 encode.@OBJEXT@: encode.c encode.h config.h
654 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
655 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
656 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
657 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
658 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
659 killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
660 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
661 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
662 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
663 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
664 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
665 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
666 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
669 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
672 pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
675 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
676 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
677 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
678 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
679 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
681 # An auxiliary program makes the PCRE default character table source
683 pcre/chartables.c: pcre/dftables@EXEEXT@
684 pcre/dftables@EXEEXT@ >pcre/chartables.c
686 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
687 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
690 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
691 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
692 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
694 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
695 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
698 @AMIGAOS_ONLY@OBJS += amiga.o
699 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
700 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
701 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
702 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
705 $(PROGRAM): $(OBJS) $(W32_FILES)
706 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
709 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags`
712 $(RM) `find . -name "*~" -o -name "#*#"`
715 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile privoxy.log core *.tar.gz *.tar
717 # FIXME: What is all this?
719 $(RM) cscope.* *.pdb *.lib *.exp
723 tags: $(SRCS) $(HDRS)
724 etags $(SRCS) $(HDRS)
728 # FIXME: This is a dirty hack to have an install target
729 # that works at least for some setups. This needs
732 $(STRIP_PROG) $(PROGRAM)
733 $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
734 $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
735 $(INSTALL) $(INSTALL_D) $(DEST)/templates
736 $(INSTALL) $(INSTALL_D) $(CONFDEST)
737 $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
738 if [ -d "doc/webserver/user-manual" ]; then $(INSTALL) $(INSTALL_T) doc/webserver/user-manual $(DEST); fi
739 $(INSTALL) $(INSTALL_T) templates/[a-z]* $(DEST)/templates
740 $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
741 # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
742 # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
743 $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
746 #############################################################################
752 # $Log: GNUmakefile.in,v $
753 # Revision 1.65 2002/04/06 05:16:39 hal9
754 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
755 # -Both of these will soon be generated files.
757 # Revision 1.64 2002/04/04 22:14:51 oes
758 # No longer rely on find honoring -iname
760 # Revision 1.63 2002/04/04 21:06:22 swa
763 # Revision 1.62 2002/04/04 20:49:50 swa
764 # attempt to consolidate the
765 # different dokbook versions.
767 # Revision 1.61 2002/04/04 19:18:21 swa
768 # readme was leftover directory. use w3m instead
769 # of lynx to be consistent among developers. use
770 # consistent target naming.
772 # Revision 1.60 2002/04/04 12:25:41 oes
773 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
775 # Revision 1.59 2002/04/04 08:32:45 swa
776 # wrong name for tarball-dist target. further fixed content of tarball dist
778 # Revision 1.58 2002/04/04 06:32:58 hal9
779 # New dok targets for make readme.
781 # Revision 1.57 2002/04/04 00:36:36 gliptak
782 # always use pcre for matching
784 # Revision 1.56 2002/04/03 22:28:03 gliptak
785 # Removed references to gnu_regex
787 # Revision 1.55 2002/04/03 19:54:29 swa
788 # freebsd tested to work. attempt to move tarball dist target forward
790 # Revision 1.54 2002/04/03 14:54:07 oes
791 # Standard clean and clobber semantics II
793 # Revision 1.53 2002/04/03 14:19:16 oes
794 # Standard clean and clobber semantics
796 # Revision 1.52 2002/04/03 02:56:18 hal9
797 # Revert previous FAQ numbering kludge.
799 # Revision 1.51 2002/04/02 13:03:56 oes
800 # Added fix for webserver permissions
802 # Revision 1.50 2002/04/02 03:46:24 hal9
803 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
804 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
806 # Revision 1.49 2002/03/30 22:20:12 swa
807 # cd didn't work. neither did find.
809 # Revision 1.48 2002/03/30 19:04:06 swa
810 # people release differently. no good.
811 # I want to make parts of the docs only.
813 # Revision 1.47 2002/03/30 09:05:21 swa
814 # better packaging. better rpm building.
815 # tar failed on sun (no exclude there).
817 # Revision 1.46 2002/03/29 20:09:01 swa
820 # Revision 1.45 2002/03/29 19:45:45 swa
823 # Revision 1.44 2002/03/29 17:42:44 gliptak
824 # Correcting for Solaris tar limitations
826 # Revision 1.43 2002/03/29 07:40:03 swa
827 # fixed make webserver. doh
829 # Revision 1.42 2002/03/29 06:59:04 swa
830 # other users could not modify files on webserver
832 # Revision 1.41 2002/03/28 20:43:00 swa
835 # Revision 1.40 2002/03/28 04:22:44 hal9
836 # More on man2html stuff.
838 # Revision 1.39 2002/03/28 01:04:14 hal9
839 # More man2html stuff for docs.
841 # Revision 1.38 2002/03/27 16:02:30 swa
842 # have a generic target
844 # Revision 1.37 2002/03/27 15:30:26 swa
845 # have a consistent appearance
847 # Revision 1.36 2002/03/27 14:58:08 swa
848 # can be used by mutilple targets
850 # Revision 1.35 2002/03/27 14:53:19 swa
853 # Revision 1.34 2002/03/27 10:30:11 swa
854 # we want a html man file on the webserver
856 # Revision 1.33 2002/03/27 03:05:35 hal9
857 # Added man2html target for docs (redhat-dok only for now)
859 # Revision 1.32 2002/03/26 22:29:54 swa
860 # we have a new homepage!
862 # Revision 1.31 2002/03/26 14:00:18 swa
863 # fixed make tarball, tarball-dist, tarball-clean
865 # Revision 1.30 2002/03/25 12:52:25 swa
868 # Revision 1.29 2002/03/24 17:03:55 jongfoster
871 # Revision 1.28 2002/03/24 16:19:48 swa
872 # configure needs to be generated.
874 # Revision 1.27 2002/03/24 16:13:57 swa
875 # generated files are a nono in cvs
877 # Revision 1.26 2002/03/24 15:36:02 swa
880 # Revision 1.25 2002/03/24 14:31:08 swa
881 # remove more crappy files. set RPM
882 # release version correctly.
884 # Revision 1.24 2002/03/24 14:19:55 swa
885 # set rpm package release in configure.in. nowhere else.
887 # Revision 1.23 2002/03/24 13:06:49 swa
888 # suse-clean now runs fine
890 # Revision 1.22 2002/03/24 12:56:21 swa
891 # name change related issues.
893 # Revision 1.21 2002/03/24 12:43:57 swa
896 # Revision 1.20 2002/03/24 11:39:17 jongfoster
897 # Renaming config files
899 # Revision 1.19 2002/03/22 20:53:03 morcego
900 # - Ongoing process to change name to JunkbusterNG
901 # - configure/configure.in: no change needed
903 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
904 # - PROGRAM = jbng@EXEEXT@
905 # - rh-spec now references as junkbusterng-rh.spec
906 # - redhat-upload: references changed to junkbusterng-* (package names)
907 # - tarball-dist: references changed to JunkbusterNG-distribution-*
908 # - tarball-src: now JunkbusterNG-*
909 # - install: initscript now junkbusterng.init and junkbusterng (when
911 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
912 # - junkbusterng.spec:
913 # - References to the expression ijb where changed where possible
914 # - New package name: junkbusterng (all in lower case, acording to
915 # the LSB recomendation)
916 # - Version changed to: 2.9.13
918 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
919 # right. If it obsoletes, why conflict ? Have to check it later)
920 # - Summary changed: Stefan, please check and aprove it
921 # - Changes description to use the new name
922 # - Sed string was NOT changed. Have to wait to the manpage to
924 # - Keeping the user junkbuster for now. It will require some aditional
925 # changes on the script (scheduled for the next specfile release)
926 # - Added post entry to move the old logfile to the new log directory
927 # - Removing "chkconfig --add" entry (not good to have it automaticaly
928 # added to the startup list).
929 # - Added preun section to stop the service with the old name, as well
930 # as remove it from the startup list
931 # - Removed the chkconfig --del entry from the conditional block on
932 # the preun scriptlet (now handled on the %files section)
933 # - junkbuster.init: renamed to junkbusterng.init
934 # - junkbusterng.init:
935 # - Changed JB_BIN to jbng
936 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
937 # be used where necessary (config dir)
940 # - The config directory is /etc/junkbuster yet. Have to change it on the
941 # specfile, after it is changes on the code
942 # - The only files that got renamed on the cvs tree were the rh specfile and
943 # the init file. Some file references got changes on the makefile and on the
944 # rh-spec (as listed above)
946 # Revision 1.18 2002/03/21 23:00:00 swa
947 # want to autogenerate stuff.
949 # Revision 1.17 2002/03/19 19:30:04 morcego
950 # - Fixing stylesheet checking on configure. If it is found, no further checks
953 # - configure will now check for db2html or docbook2html (should work now
954 # on SuSe without the docbktls package)
956 # Revision 1.16 2002/03/14 22:32:32 hal9
957 # Bumped the RPM version.
959 # Revision 1.15 2002/03/08 20:00:28 swa
962 # Revision 1.14 2002/03/07 18:25:56 swa
963 # synced redhat and suse build process
965 # Revision 1.13 2002/03/07 17:17:56 oes
966 # (Hopefully) fixed for older make versions
968 # Revision 1.12 2002/03/07 15:28:27 swa
971 # Revision 1.11 2002/03/06 14:33:18 sarantis
972 # Use proper temp file, not "abc".
974 # Revision 1.10 2002/03/06 14:19:35 sarantis
975 # Cleanup PID_FILE_PATH from redhat-dist target
977 # Revision 1.9 2002/03/05 17:31:11 morcego
978 # Search for docbook.dsl. Should solve portability problems for SuSe.
980 # Revision 1.8 2002/03/05 14:07:42 morcego
981 # configure now detects rpm topdir, and change GNUmakefile acordingly
982 # (based on sugestion by Sarantis Paskalis)
984 # Revision 1.7 2002/03/05 13:43:28 morcego
985 # Checking for text browser, so redhat-dok can work.
987 # Revision 1.6 2002/03/05 13:10:51 morcego
988 # Changes to implement redhat-dok (Hal Burgiss)
989 # Changes to make it work on other distros and out-of-the-shelf configurations
991 # Revision 1.5 2002/02/27 15:30:39 hal9
992 # Reset $(RPM_PACKAGEV) to 1 (was 2)
994 # Revision 1.4 2002/01/17 21:44:04 jongfoster
995 # Adding urlmatch.[ch]
997 # Revision 1.3 2002/01/04 15:26:08 oes
998 # Added tarball-src target
1000 # Revision 1.2 2001/12/30 14:07:31 steudten
1001 # - Add signal handling (unix)
1002 # - Add SIGHUP handler (unix)
1003 # - Add creation of pidfile (unix)
1004 # - Add action 'top' in rc file (RH)
1005 # - Add entry 'SIGNALS' to manpage
1006 # - Add exit message to logfile (unix)
1008 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1009 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1010 # make break in a more obvious way.
1011 # Adding .PHONY section.
1013 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1014 # Renaming various config files
1015 # Fixing CR->CRLF under Win32 (I hope)
1017 # Revision 1.39 2001/11/06 12:07:30 steudten
1018 # Add --clean for building rpm in target redhat-dist.
1020 # Revision 1.38 2001/11/05 21:35:23 steudten
1021 # Complete rewrite for the 'redhat-dist' target.
1022 # Checks for writeable RPM build directories for calling user.
1023 # So you must not be root, just set the modes to 1777 to
1024 # build a RH package.
1025 # Fix the upload-target to be arch independant.
1026 # Add target for 'solaris-dist' - coming soon.
1028 # Revision 1.37 2001/11/01 00:52:04 hal9
1029 # Redhat-upload stuff per Stefan.
1031 # Revision 1.36 2001/10/31 19:26:13 swa
1032 # automate process of uploading new releases
1035 # Revision 1.35 2001/10/15 22:14:59 joergs
1036 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1037 # the general CFLAGS already.
1039 # Revision 1.34 2001/10/15 18:28:06 steudten
1040 # remove config.cache for target clobber.
1041 # Cleanup make dist for RH and S.u.S.E.
1043 # Revision 1.33 2001/10/10 12:43:33 oes
1044 # Added ugly hack to make install target work at least for some setups.
1046 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1047 # Correcting actionsfile filename for Win32 INI build
1049 # Revision 1.31 2001/09/23 10:13:48 swa
1050 # upload process established. run make webserver and
1051 # the documentation is moved to the webserver. documents
1052 # are now linked correctly.
1054 # Revision 1.30 2001/09/19 17:55:49 oes
1057 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1058 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1059 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1060 # of build problems.
1062 # Revision 1.28 2001/09/13 15:19:08 swa
1063 # we want text files as well.
1065 # Revision 1.27 2001/09/13 13:11:37 steudten
1067 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1069 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1070 # Mac OSX (Darwin) support added.
1072 # Revision 1.25 2001/09/12 22:55:45 joergs
1073 # AmigaOS support added.
1075 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1077 # OS/2 port: update autoconf'd support for the platform.
1079 # Revision 1.23 2001/09/12 16:28:42 swa
1080 # added "make dok" section to generate html pages from
1081 # the sgml source documents. note that the we do not want
1082 # generated stuff in cvs.
1084 # Revision 1.22 2001/09/10 16:31:23 swa
1085 # buildroot definition in the specfile fucks up the build
1086 # process under suse. hence I moved it to the "rpm -ta"
1089 # Revision 1.21 2001/09/10 11:12:49 oes
1092 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1093 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1095 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1096 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1098 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1099 # Major changes to build system in order to fix these bugs:
1100 # - pthreads under Linux was broken - changed -lpthread to -pthread
1101 # - Compiling in MinGW32 mode under CygWin now correctly detects
1102 # which shared libraries are available
1103 # - Solaris support (?) (Not tested under Solaris yet)
1105 # Revision 1.17 2001/07/28 16:44:54 oes
1106 # Fixed sed LF->CRLF conversion and removed deprecated files
1108 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1109 # Added support for linking with POSIX threads library
1111 # Revision 1.15 2001/07/13 13:48:07 oes
1112 # - Moved STATIC #define for pcre to (ac)config.h
1113 # - Made -Ipcre depandant on static pcre compilation to
1114 # avoid version conflicts
1115 # - Included compilation and depandancies for new deanimate.c
1116 # - Made changes to the pcre/pcreposix/pcrs build process
1117 # as required by the new library autodetection in
1120 # Revision 1.14 2001/07/01 16:27:44 oes
1121 # Fixed misplaced dependancy
1123 # Revision 1.13 2001/06/29 13:18:36 oes
1124 # - added depandancy of filters.o on cgi.h
1126 # Revision 1.12 2001/06/12 17:15:56 swa
1127 # fixes, because a clean build on rh6.1 was impossible.
1128 # GZIP confuses make, %configure confuses rpm, etc.
1130 # Revision 1.11 2001/06/11 11:26:35 sarantis
1131 # RPM version should be the same as ijbswa version. The rpm release is
1132 # specified in the specfile.
1134 # Revision 1.10 2001/06/07 17:27:45 swa
1135 # added suse build section
1137 # Revision 1.9 2001/06/04 18:31:58 swa
1138 # files are now prefixed with either `confdir' or `logdir'.
1139 # `make redhat-dist' replaces both entries confdir and logdir
1140 # with redhat values
1142 # Revision 1.8 2001/06/04 10:44:57 swa
1143 # `make redhatr-dist' now works. Except for the paths
1144 # in the config file.
1146 # Revision 1.7 2001/06/03 17:09:09 swa
1147 # swa for oes: reversed my earlier change
1149 # Revision 1.6 2001/06/03 17:07:27 swa
1152 # Revision 1.5 2001/06/03 13:57:26 swa
1153 # compile cgi.c (for andreas' GUI)
1155 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1156 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1158 # Revision 1.3 2001/05/29 20:02:48 joergs
1159 # Changes for AmigaOS added.
1161 # Revision 1.2 2001/05/17 22:23:23 oes
1162 # - Added auto-generation of CRLFs for Win32 config files
1163 # - Added comment-prefix to all Win32-only options in the config file
1164 # and provided auto stripping of this prefix for the Win32 platform by make
1166 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1167 # Initial import of version 2.9.3 source tree