1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.127 2002/10/18 00:58:07 hal9 Exp $
5 # Written by and Copyright (C) 2001 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
47 SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
50 #############################################################################
52 #############################################################################
54 DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src
55 DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre
56 DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
58 #############################################################################
59 # Directories for "make install"
60 #############################################################################
63 exec_prefix = @exec_prefix@
64 CONF_BASE = @sysconfdir@
67 MAN_DEST = $(MAN_DIR)/man1
68 SHARE_DEST = @datadir@
69 DOC_DEST = $(SHARE_DEST)/doc/privoxy
70 VAR_DEST = @localstatedir@
71 LOGS_DEST = $(VAR_DEST)/log/privoxy
72 PIDS_DEST = $(VAR_DEST)/run
74 # if $prefix = /usr/local then the default CONFDEST change from
75 # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
76 # by the target rule CONF_DEST
78 # also if the $prefix is /usr/local and there is no
79 # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
80 # instead in this situation
82 # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
83 # changes this to /var for storing the logs and pidfile
85 # used in source dir only, the install goes to $share_dest/doc/privoxy
86 DOK_WEB = doc/webserver/
88 #############################################################################
90 #############################################################################
92 PROGRAM = privoxy@EXEEXT@
99 INSTALL_D = -m 0755 -d
100 # install options for superuser install
101 #INSTALL_S = -g @GROUP@ -o @USER@
102 # id -u is not universal. FIXME: need to set from configure. Breaks on
108 MKDIR = ./mkinstalldirs
121 WDUMP = @WDUMP@ -dump
124 DOC_STATUS = @DOC_STATUS@
125 # Note: Please make sure that -d ldp.dsl\#html stays the last option to
126 # $(JADEBIN), because for some targets "-notoc" will be appended
127 # to it (--> "ldp.dsl\#html-notoc").
128 DB = $(JADEBIN) $(JADECAT) -i$(DOC_STATUS) -ihtml -t sgml -D.. -d ldp.dsl\#html
129 MAN2HTML = @MAN2HTML@
130 G2H_CMD = groff -mandoc -Thtml
134 DOC_TMP = $(DOC_DIR)/tmp
135 DKPREFIX = @DKPREFIX@
141 # Program to do LF->CRLF
143 # The sed version should be the most portable, but it doesn't work for me,
144 # the other two do. FIXME.
146 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
147 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
148 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
150 #############################################################################
151 # Setup for make distribution rh and suse for now
152 #############################################################################
154 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
155 RPM_BASE = @RPM_BASE@
157 #############################################################################
158 # We include these files in our distributions
159 #############################################################################
160 CONFIGS = config trust default.action standard.action user.action default.filter
161 # take care that no CVS .cvsignore or other crappy files
163 # and escape every '#' in the find. doh.
164 CONFIG_FILES = $(CONFIGS) \
165 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
167 DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
168 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
169 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
170 `find doc/webserver/ -name "*.css"` \
173 #############################################################################
174 # Filenames and libraries
175 #############################################################################
178 $(DIR_PRIVOXY_SRC)/actions.c \
179 $(DIR_PRIVOXY_SRC)/cgi.c \
180 $(DIR_PRIVOXY_SRC)/cgiedit.c \
181 $(DIR_PRIVOXY_SRC)/cgisimple.c \
182 $(DIR_PRIVOXY_SRC)/deanimate.c \
183 $(DIR_PRIVOXY_SRC)/encode.c \
184 $(DIR_PRIVOXY_SRC)/errlog.c \
185 $(DIR_PRIVOXY_SRC)/filters.c \
186 $(DIR_PRIVOXY_SRC)/gateway.c \
187 $(DIR_PRIVOXY_SRC)/jbsockets.c \
188 $(DIR_PRIVOXY_SRC)/jcc.c \
189 $(DIR_PRIVOXY_SRC)/killpopup.c \
190 $(DIR_PRIVOXY_SRC)/list.c \
191 $(DIR_PRIVOXY_SRC)/loadcfg.c \
192 $(DIR_PRIVOXY_SRC)/loaders.c \
193 $(DIR_PRIVOXY_SRC)/miscutil.c \
194 $(DIR_PRIVOXY_SRC)/parsers.c \
195 $(DIR_PRIVOXY_SRC)/ssplit.c \
196 $(DIR_PRIVOXY_SRC)/urlmatch.c
198 C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
199 C_HDRS = $(C_SRC:.c=.h) $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/actionlist.h
201 W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c
202 W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res
203 W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES)
204 W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h
205 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
206 W32_INIS = @WIN_ONLY@config.txt trust.txt
208 PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c
209 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
210 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
212 PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c
213 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
214 PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
216 # No REGEX (maybe because dynamically linked pcreposix):
218 @STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c
220 REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
221 REGEX_HDRS = $(REGEX_SRC:.c=.h)
223 # Dependencies introduced by #include "project.h".
224 PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h
226 # Socket libraries for platforms that need them explicitly defined
227 SOCKET_LIB = @SOCKET_LIB@
229 # PThreads library, if needed.
230 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
232 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
233 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
234 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
235 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
238 #############################################################################
240 #############################################################################
242 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
243 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
245 # The flag "-pthread" is required if using Pthreads under Linux (and
246 # possibly other OSs).
247 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
249 # Add your flags here
252 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
253 @STATIC_PCRE_ONLY@ -Ipcre
255 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
258 #############################################################################
261 # There should NOT be any targets above this line.
262 #############################################################################
263 all: $(PROGRAM) default.action
266 #############################################################################
268 #############################################################################
269 .PHONY: all inifiles redhat-dist redhat-upload redhat-test solaris-dist suse-dist \
270 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
271 install conectiva-spec conectiva-dist conectiva-upload debian-dist \
272 debian-upload ensure-wdump ensure-jadebin ensure-dkprefix CONF_DEST LOG_DEST \
273 PID_DEST check_doc install-strip uninstall GROUP_T
276 #############################################################################
278 #############################################################################
279 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ)
280 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
282 $(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ)
283 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
288 #############################################################################
289 # Strip master copy comments from default.action:
290 #############################################################################
291 default.action: default.action.master
292 $(GREP) -v '^#MASTER#' $< > $@
294 #############################################################################
296 #############################################################################
298 inifiles: $(W32_INIS)
301 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
302 -e 's!\jarfile jarfile!jarfile jar.log!' \
303 -e 's!\logfile logfile!logfile privoxy.log!' \
304 -e 's!#Win32-only: !!' \
307 # LF to CRLF in default.action
308 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
309 # LF to CRLF in default.filter
310 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
313 $(DOSFILTER) < $< > $@
315 #############################################################################
317 #############################################################################
319 @if [ -d CVS ]; then \
320 $(ECHO) "***************************************************"; \
322 $(ECHO) "*** WARNING ***"; \
324 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
325 $(ECHO) "*** that you are trying to build a distribution ***"; \
326 $(ECHO) "*** package based on a checked out, not an ***"; \
327 $(ECHO) "*** exported copy of the source tree. Please ***"; \
328 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
329 $(ECHO) "*** developer manual. ***"; \
331 $(ECHO) "***************************************************"; \
332 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
333 $(ECHO) -n "really want to proceed: "; \
335 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
338 #############################################################################
339 # create tar.gz from CVS:
340 # This make-target is usually called through 'create-archive'. If you
341 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
342 # tar.gz with the current date in the name and as a releasenumber in the
343 # spec-file. But the main usage is to run it as follows (Red Hat example):
344 # make SNAPVERSION=1.6x create-snapshot
345 # This creates a tar.gz and spec-file for a Red Hat 6.x version.
346 #############################################################################
348 @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
349 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
350 echo "*** Creating package from $$tag!"; \
351 cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."
352 @cd $(TMPDIR)/current; \
353 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
354 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
355 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
356 privoxy-rh.spec > $$TMPFILE ; then \
357 $(MV) -f $$TMPFILE privoxy-rh.spec; \
359 $(ECHO) "Could not set version info in specfile."; \
362 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
363 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
364 privoxy-suse.spec > $$TMPFILE ; then \
365 $(MV) -f $$TMPFILE privoxy-suse.spec; \
367 $(ECHO) "Could not set version info in specfile."; \
371 cd $(TMPDIR)/current; \
372 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
373 "privoxy-suse.spec" -czf $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .; \
374 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
375 "privoxy-rh.spec" -czf $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
376 @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .
377 @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
379 @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and"
380 @echo " $(PROGRAM)-suse-$(VERSION).tar.gz"
383 #############################################################################
384 # looks at the version of Makefile and exports a corresponding source-tree
385 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
386 # privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
387 # Red Hat and one for SuSe (different spec-files)
388 #############################################################################
390 make SNAPVERSION=$(SNAPVERSION) create-snapshot
393 #############################################################################
394 # RPM specific stuff (SuSE or Redhat, ..)
395 #############################################################################
396 rpm-stuff: dist-check clean clobber
397 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
398 if [ ! -w $(RPM_BASE)/$$dir ]; then \
399 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
400 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
401 $(ECHO) "%_topdir /home/foo/rpm-build"; \
407 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
409 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
410 echo " No value given for RPM_PACKAGEV. Please use:"; \
411 echo " make dist-upload RPM_PACKAGEV=release"; \
412 echo " where \"release\" is the release number you want to and"; \
413 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
415 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
417 echo "ATTENTION: If your distribution use a specific tag on the"; \
418 echo " release field (like \"cl\" for Conectiva, and"; \
419 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
420 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
421 echo " Do it like you would do for a redhat package,"; \
422 echo " (i.e. just the number)."; \
428 #############################################################################
429 # Create Conectiva specfile from RedHat specfile
430 #############################################################################
432 $(RM) privoxy-cl.spec
433 chmod a+x genclspec.sh
436 #############################################################################
437 # Conectiva distribution for x86
438 #############################################################################
439 conectiva-dist: rpm-stuff conectiva-spec
441 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
442 $(RPM) --clean -ta $(TAR_ARCH)
443 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
445 conectiva-upload: check-release
446 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
448 #############################################################################
449 # redhat distribution alpha and x86
450 #############################################################################
451 redhat-dist: rpm-stuff
453 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
454 $(RPMBUILD) --clean -ta $(TAR_ARCH)
455 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
457 # For testing build issues only! Use redhat-dist for official releases.
460 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
461 $(RPMBUILD) --clean -tb $(TAR_ARCH)
462 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
463 @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
465 # anonymously ncftps the rpms to sourceforge
466 redhat-upload: check-release
467 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
468 # better should use `arch` here instead of ix86 to support other platforms too
469 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
470 @$(ECHO) -------------------------------------------------------
472 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
473 @$(ECHO) ... and release the files.
474 @$(ECHO) -------------------------------------------------------
475 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
477 #############################################################################
478 # suse distribution. works fine. no need to be root.
479 #############################################################################
481 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
482 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
483 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
484 # privoxy-suse.spec > $$TMPFILE ; then \
485 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
487 # $(ECHO) "Could not set version info in specfile."; \
491 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
492 $(RPM) --clean -ta $(TAR_ARCH)
493 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
495 # anonymously ncftps the rpms to sourceforge
496 suse-upload: check-release
497 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
498 # better should use `arch` here instead of ix86 to support other platforms too
499 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
500 @$(ECHO) -------------------------------------------------------
502 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
503 @$(ECHO) ... and release the files.
504 @$(ECHO) -------------------------------------------------------
506 # handle with care. use with root.
508 $(RPM) -e junkbuster-suse || true
509 $(RM) -r /etc/junkbuster
510 $(RM) -r /etc/rc.d/junkbuster*
511 $(RM) -r /var/run/junkbuster.pid
512 $(RM) -r /var/log/junkbuster
513 $(RM) /etc/init.d/junkbuster
514 $(RM) /usr/sbin/junkbuster
515 $(RM) /usr/sbin/rcjunkbuster
516 $(RM) /usr/share/man/man1/junkbuster.1.gz
517 $(RPM) -e privoxy-suse || true
518 $(RM) -r /etc/privoxy
519 $(RM) -r /etc/rc.d/privoxy*
520 $(RM) -r /var/run/privoxy.pid
521 $(RM) -r /var/log/privoxy
522 $(RM) /etc/init.d/privoxy
523 $(RM) /usr/sbin/privoxy
524 $(RM) /usr/sbin/rcprivoxy
525 $(RM) /usr/share/man/man1/privoxy.1.gz
528 #############################################################################
529 # generic distribution
530 #############################################################################
533 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
536 $(STRIP_PROG) $(PROGRAM)
537 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
539 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
541 for foo in $(CONFIG_FILES); do \
542 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
545 for foo in $(DOC_FILES); do \
546 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
548 # and zip the archive
549 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
550 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
551 @$(ECHO) Distribution with binary created.
553 # anonymously ncftps the package to sourceforge
555 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
556 @$(ECHO) -------------------------------------------------------
558 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
559 @$(ECHO) ... and release the files.
560 @$(ECHO) -------------------------------------------------------
564 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
566 #############################################################################
567 # solaris distribution. verified on SF machines by swa.
568 #############################################################################
569 solaris-dist: gen-dist
571 # anonymously ncftps the package to sourceforge
572 solaris-upload: gen-upload
575 solaris-clean: gen-clean
578 #############################################################################
580 #############################################################################
582 @$(ECHO) coming soon.
584 @$(ECHO) coming soon.
586 #############################################################################
587 # debian distribution
588 #############################################################################
590 @$(ECHO) Creating Debian package. Will exist in parent directory.
591 dpkg-buildpackage -rfakeroot -us -uc
593 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb
594 @$(ECHO) -------------------------------------------------------
596 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
597 @$(ECHO) ... and release the files.
598 @$(ECHO) -------------------------------------------------------
601 #############################################################################
602 # macosx distribution
603 #############################################################################
605 @$(ECHO) coming soon.
607 @$(ECHO) coming soon.
609 #############################################################################
611 #############################################################################
613 @$(ECHO) coming soon.
615 @$(ECHO) coming soon.
617 #############################################################################
618 # freebsd distribution. verified on SF machines by swa.
619 #############################################################################
620 freebsd-dist: gen-dist
622 # anonymously ncftps the package to sourceforge
623 freebsd-upload: gen-upload
626 freebsd-clean: gen-clean
629 #############################################################################
630 # Windows distribution
631 #############################################################################
633 @$(ECHO) RTFM. You shouldn't run configure before making
634 @$(ECHO) the Windows release, so you need to start again from
635 @$(ECHO) a clean CVS export.
639 #############################################################################
640 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
641 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
642 #############################################################################
644 tarball-dist: dist-check clean clobber
645 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
647 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
648 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \
649 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
651 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
653 # and zip the archive
654 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
655 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
656 @$(ECHO) Tarball distribution created.
658 # anonymously ncftps the tarball to sourceforge
660 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
661 @$(ECHO) -------------------------------------------------------
663 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
664 @$(ECHO) ... and release the files.
665 @$(ECHO) -------------------------------------------------------
668 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
670 #############################################################################
674 # converts doc/source/*.sgml into html, text and man pages
676 #############################################################################
680 cd $(DOC_DIR) && $(MAKE)
682 #############################################################################
686 # moves dokumentation to webserver
688 #############################################################################
690 @$(ECHO) -------------------------------------------------------
691 @$(ECHO) You have run make dok/redhat-dok before, right?
692 @$(ECHO) Note that this command scps all stuff to the webserver,
693 @$(ECHO) it will not remove obsolete documents.
694 @$(ECHO) -------------------------------------------------------
696 @$(ECHO) Uploading html
698 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
699 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
701 @$(ECHO) Uploading pdf
703 zip privoxy-pdf-docs *.pdf ;\
704 scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf
706 @$(ECHO) Fixing permissions
707 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
708 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
709 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
714 @cd doc/webserver/actions; \
715 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
716 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
718 @$(ECHO) Fixing permissions
719 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
720 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
722 #############################################################################
723 # Source file dependencies
724 #############################################################################
726 $(DIR_PRIVOXY_OBJ)/actions.@OBJEXT@: $(DIR_PRIVOXY_SRC)/actions.c $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/actionlist.h
727 $(DIR_PRIVOXY_OBJ)/cgi.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgi.c $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
728 $(DIR_PRIVOXY_OBJ)/cgiedit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgiedit.c $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
729 $(DIR_PRIVOXY_OBJ)/cgisimple.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgisimple.c $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h
730 $(DIR_PRIVOXY_OBJ)/deanimate.@OBJEXT@: $(DIR_PRIVOXY_SRC)/deanimate.c $(DIR_PRIVOXY_SRC)/deanimate.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS)
731 $(DIR_PRIVOXY_OBJ)/encode.@OBJEXT@: $(DIR_PRIVOXY_SRC)/encode.c $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/config.h
732 $(DIR_PRIVOXY_OBJ)/errlog.@OBJEXT@: $(DIR_PRIVOXY_SRC)/errlog.c $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h
733 $(DIR_PRIVOXY_OBJ)/filters.@OBJEXT@: $(DIR_PRIVOXY_SRC)/filters.c $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/deanimate.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/win32.h
734 $(DIR_PRIVOXY_OBJ)/gateway.@OBJEXT@: $(DIR_PRIVOXY_SRC)/gateway.c $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
735 $(DIR_PRIVOXY_OBJ)/jbsockets.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jbsockets.c $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/filters.h
736 $(DIR_PRIVOXY_OBJ)/jcc.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jcc.c $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/cgi.h
737 $(DIR_PRIVOXY_OBJ)/killpopup.@OBJEXT@: $(DIR_PRIVOXY_SRC)/killpopup.c $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h
738 $(DIR_PRIVOXY_OBJ)/list.@OBJEXT@: $(DIR_PRIVOXY_SRC)/list.c $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/miscutil.h
739 $(DIR_PRIVOXY_OBJ)/loadcfg.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loadcfg.c $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h
740 $(DIR_PRIVOXY_OBJ)/loaders.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loaders.c $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h
741 $(DIR_PRIVOXY_OBJ)/miscutil.@OBJEXT@: $(DIR_PRIVOXY_SRC)/miscutil.c $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/config.h
742 $(DIR_PRIVOXY_OBJ)/parsers.@OBJEXT@: $(DIR_PRIVOXY_SRC)/parsers.c $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
743 $(DIR_PRIVOXY_OBJ)/ssplit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/ssplit.c $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/miscutil.h
744 $(DIR_PRIVOXY_OBJ)/urlmatch.@OBJEXT@: $(DIR_PRIVOXY_SRC)/urlmatch.c $(DIR_PRIVOXY_SRC)/urlmatch.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h
747 $(DIR_PRIVOXY_OBJ)/pcrs.@OBJEXT@: $(DIR_PRIVOXY_SRC)/pcrs.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/config.h
750 $(DIR_PRIVOXY_OBJ)/get.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
751 $(DIR_PRIVOXY_OBJ)/maketables.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
752 $(DIR_PRIVOXY_OBJ)/pcre.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcre.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c
753 $(DIR_PRIVOXY_OBJ)/pcreposix.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
754 $(DIR_PRIVOXY_OBJ)/study.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
756 # An auxiliary program makes the PCRE default character table source
758 $(DIR_PRIVOXY_SRC_PCRE)/chartables.c: $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@
759 $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ >$(DIR_PRIVOXY_SRC_PCRE)/chartables.c
761 $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@: $(DIR_PRIVOXY_SRC_PCRE)/dftables.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/config.h
762 $(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
765 $(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
766 $(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.c $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
767 $(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/w32taskbar.h
769 $(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
770 $(DIR_PRIVOXY_SRC)/w32res.h \
771 $(DIR_PRIVOXY_SRC)/config.h \
772 $(DIR_PRIVOXY_SRC)/icons/ico00001.ico \
773 $(DIR_PRIVOXY_SRC)/icons/ico00002.ico \
774 $(DIR_PRIVOXY_SRC)/icons/ico00003.ico \
775 $(DIR_PRIVOXY_SRC)/icons/ico00004.ico \
776 $(DIR_PRIVOXY_SRC)/icons/ico00005.ico \
777 $(DIR_PRIVOXY_SRC)/icons/ico00006.ico \
778 $(DIR_PRIVOXY_SRC)/icons/ico00007.ico \
779 $(DIR_PRIVOXY_SRC)/icons/ico00008.ico \
780 $(DIR_PRIVOXY_SRC)/icons/idle.ico \
781 $(DIR_PRIVOXY_SRC)/icons/privoxy.ico
782 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
785 @AMIGAOS_ONLY@OBJS += $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@
786 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
787 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
788 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
789 $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@: $(DIR_PRIVOXY_SRC)/amiga.c $(DIR_PRIVOXY_SRC)/amiga.h $(DIR_PRIVOXY_SRC)/config.h
792 $(PROGRAM): $(OBJS) $(W32_FILES)
793 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
796 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) \
797 default.action `find . -name TAGS -o -name tags`
800 $(RM) `find . -name "*~"`
801 # $(RM) `find . -name "#*#"` # what is this for??
802 $(RM) `find . -name ".\#*"`
805 $(RM) GNUmakefile configure src/config.h.in src/config.h config.cache config.status config.log logfile \
806 privoxy.log core *.tar.gz *.tar privoxy-cl.spec $(DOC_DIR)/ldp.dsl \
807 $(DOC_DIR)/GNUmakefile
810 # FIXME: What is all this?
812 $(RM) cscope.* *.pdb *.lib *.exp
816 tags: $(SRCS) $(HDRS)
817 etags $(SRCS) $(HDRS)
819 CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
820 $(ECHO) "$(CONF_BASE)/privoxy";\
822 $(ECHO) "$(CONF_BASE)";\
825 LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
826 $(ECHO) "/var/log/privoxy" ;\
828 $(ECHO) "$(LOGS_DEST)";\
831 PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
832 $(ECHO) "/var/run" ;\
834 $(ECHO) "$(PIDS_DEST)";\
837 check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
843 # If USER is specified but no GROUP, assume there is a GROUP of same name.
844 GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
851 $(MAKE) install STRIP=-s
853 # FIXME: redhat init script has wrong paths for /usr/local/ install.
855 # FIXME: Check USER and GROUP on Slack to make user this works as
858 # FIXME: id handling needs help, probably via configure, since 'id -u' is not
859 # universally reliable (eg Solaris). Group handling is weak. If group is null,
860 # we blindly assume there is a group that matches $(USER). configure only
861 # tests for the first group outputted from groups command. Perhaps the whole
862 # user/group validation should be done here. In fact, it should probably be
863 # tested for and set first thing, ie for a root install.
864 install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
865 # Quick test for valid USER.
866 if [ -n "$(USER)" ]; then \
867 id $(USER) >/dev/null || exit 1;\
869 $(ECHO) "Creating directories, and preparing Privoxy installation"
870 $(CHMOD) 0755 $(MKDIR)
871 $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
872 $(LOG_DEST) $(PID_DEST)
873 # Install the executable binary, strip if invoked as install-strip
874 test -n "$(STRIP)" &&\
875 $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
876 $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
877 $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
879 # Install the DOCS and man page
880 -if [ $(check_doc) = 0 ]; then \
883 DOC=$(prefix)/doc/privoxy ;\
885 $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
886 $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
887 if [ -d "$(DOK_WEB)" ]; then \
888 $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
889 for i in user-manual developer-manual faq; do \
890 for ii in $(DOK_WEB)/$$i/*html; do \
891 $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
894 for i in $(DOK_WEB)/images/*jpg; do \
895 $(INSTALL) $(INSTALL_T) $$i $$DOC/images;\
897 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
898 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
899 $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
900 $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
901 $(INSTALL) $(INSTALL_T) README $$DOC;\
902 $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
903 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
905 $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
906 -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
908 # Change the config file default directories according to the configured ones
909 $(ECHO) Rewriting config for this installation
910 if [ -f config.base ] ; then \
911 $(CAT) config >config~ ;\
912 $(MV) config.base config ;\
914 $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
915 $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.updated
916 $(MV) config config.base
917 $(MV) config.updated config
919 # Install the config support files. Test for root install, and abort
920 # if there is no privoxy user, and no other user was enabled during
921 # configure. Later, install init script if appropriate.
922 $(ECHO) Installing templates to $(CONF_DEST)/templates
923 for i in `find templates -type f`; do \
924 $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
926 if [ "`id |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
927 if [ x$(USER) = x ]; then \
928 if [ "`id privoxy`" ]; then \
929 $(ECHO) "Setting user and group to privoxy";\
930 INSTALL_CONF="$(INSTALL_T) -g privoxy -o privoxy" ;\
934 $(ECHO) "******************************************************************" ;\
935 $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
936 $(ECHO) " It is strongly recommended to run $(PROGRAM) as non-root user," ;\
937 $(ECHO) " and to install the config files as that user!" ;\
938 $(ECHO) " Please read INSTALL, and create a privoxy user!" ;\
939 $(ECHO) "*******************************************************************" ;\
943 $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
944 INSTALL_CONF="$(INSTALL_T) -o $(USER) -g $(GROUP_T)" ;\
947 if [ ! "`id $(USER)`" = "`id`" ] ;then \
948 $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
949 $(ECHO) "Edit may fail." ;\
951 INSTALL_CONF="$(INSTALL_T)" ;\
953 $(ECHO) Installing configuration files to $(CONF_DEST);\
954 for i in $(CONFIGS); do \
955 if [ -s "$(CONF_DEST)/$$i" ] ; then \
956 $(ECHO) Installing $$i as $$i.new ;\
957 $(INSTALL) $$i $(CONF_DEST)/$$i.new || exit 1;\
960 if test "$$i" = "config" || test "$$i" = "default.filter"; then \
961 $(INSTALL) $$i $(CONF_DEST) || exit 1;\
962 $(CHMOD) 0640 $(CONF_DEST)/$$i ;\
964 $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
968 if [ -n "$$NEW" ]; then \
969 $(CHMOD) 0640 $(CONF_DEST)/*.new || exit 1 ;\
970 $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
972 ! test -f $(LOG_DEST)/logfile && $(ECHO) Creating logfiles in $(LOG_DEST) || \
973 $(ECHO) Checking logfiles in $(LOG_DEST) ;\
974 $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
975 if [ x$$USER != x ]; then \
976 $(CHOWN) $$USER:$$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
977 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
979 $(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
980 if [ "$(prefix)" = "/usr/local" ]; then \
981 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
982 $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
983 $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
984 $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
985 $(SED) 's+%USER%+$(USER)+' | \
986 $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
987 $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
988 $(ECHO) "Installing for Slackware." ;\
989 $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
990 elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
991 $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
992 $(INSTALL) $(INSTALL_P) privoxy.init /etc/rc.d/init.d/privoxy ;\
993 $(MKDIR) /etc/logrotate.d/ ;\
994 $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
995 $(INSTALL) $(INSTALL_P) privoxy.logrotate /etc/logrotate.d/privoxy ;\
996 elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
997 $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
998 $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
999 $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
1002 $(ECHO) "No init script installed, install it manually if needed" ;\
1005 @$(ECHO) "Privoxy installation succeeded!"
1006 @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
1008 # rmdir is used as a precaution since it will not remove non-empty
1010 uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
1011 $(ECHO) Starting Privoxy uninstallation
1012 # KILL privoxy if running
1013 -@ test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
1014 $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid`
1015 -@ test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
1016 $(KILL) `$(CAT) /var/run/privoxy.pid `
1019 $(ECHO) Removing $(PROGRAM) binary
1020 $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
1022 # config files and dir, and maybe old install backups
1023 $(ECHO) Removing $(PROGRAM) config files
1024 for i in $(CONFIGS); do \
1025 $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
1027 $(RM) -r $(CONF_DEST)/templates
1030 $(ECHO) Removing $(PROGRAM) docs
1031 -$(RM) $(MAN_DEST)/privoxy.1*
1032 -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
1034 # Log and jarfile and pidfile
1035 $(ECHO) Removing $(PROGRAM) logs
1036 -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
1038 # Final clean up of unused directories. Special handling of CONF and LOG
1040 $(ECHO) Removing $(PROGRAM) directories
1041 for i in $(LOG_DEST) $(CONF_DEST); do \
1042 if test -d $$i; then \
1043 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1046 if [ ! "$(prefix)" = "/usr/local" ] ;then \
1047 for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
1048 if test -d $$i; then \
1049 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1052 if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
1053 $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
1055 if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
1056 $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
1058 if test $(prefix)/var != /var && test -d $(prefix)/var; then \
1059 $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
1061 if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
1062 $(ECHO) Removing installation directory $(prefix) ;\
1063 $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
1067 # init scripts and logrotate
1068 if [ "$(prefix)" = "/usr/local" ]; then \
1069 $(ECHO) Removing $(PROGRAM) init script ;\
1070 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
1071 $(RM) /etc/rc.d/rc.privoxy ;\
1072 elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
1073 $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
1074 elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
1075 $(RM) /etc/init.d/privoxy ;\
1077 $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
1080 $(ECHO) Privoxy uninstalled, bye
1083 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
1084 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
1085 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
1086 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
1087 193,51,228,11,1,0,0);'|zcat
1089 #############################################################################
1095 # $Log: GNUmakefile.in,v $
1096 # Revision 1.127 2002/10/18 00:58:07 hal9
1097 # More install/uninstall/install-strip updates:
1098 # - Don't install gzipped man page (Solaris again).
1099 # - Don't overwrite existing config files, and install new versions as *.new.
1100 # Fix permissions/ownership here too.
1101 # - Better testing before removing directories.
1102 # - Some better messages during install, ie 'Preserving configs', etc.
1103 # - Better handling of install-strip to fix previous problem of trying to strip
1105 # - Crude test for valid USER in case is set on command line.
1106 # - Force immediate exit on some errors (eg invalid group).
1108 # Revision 1.126 2002/10/16 05:38:00 hal9
1109 # More make install/uninstall updates:
1110 # -Make compatible with install-sh with does not support -b flag, and can only
1111 # handle one file at a time (sigh).
1112 # -Manually save existing config files, if they exist.
1113 # -Fix install-strip so does not try to strip init scripts.
1115 # Revision 1.125 2002/10/15 05:53:34 hal9
1116 # A few more cleanups:
1117 # -use mkinstalldirs consistently.
1118 # -Install init script and logrotate only is prefix=/usr/local (installed to
1119 # system dir /etc instead of /usr/local...)
1120 # -Test for directory existence before removing to avoid misleading error
1123 # Revision 1.124 2002/10/13 19:58:09 hal9
1124 # Hopefully, this is final updates for install and uninstall targets.
1125 # - Fix typo in chown syntax
1126 # - chmod on mkinstalldirs to make it executable (is there a better way?).
1127 # - Cleanup comments, and revert most of previous output cleanup changes.
1128 # - Include all HTML docs, since there are cross links between these.
1129 # - Improved group handling (still some potential problems, see FIXME).
1130 # - Update PHONY targets.
1131 # - Uninstall was not removing CONF and LOG destinations in some situations.
1132 # - Various other minor cleanups.
1134 # Revision 1.123 2002/10/12 06:05:41 hal9
1135 # WIP: This is mostly to fix various problems encountered on SF CF Solaris
1136 # servers for the install target only. This did not handle /[^C]*, test -e, not
1137 # quoting within tests (ie [ `id $(USER)` = `id` ] needs quoting) in some
1138 # situations, and does not support id -u (with the id in $PATH, but there is
1139 # another...). Also, cleaned up output. Needs testing. I am unable to test the
1140 # root install stuff either. It installs now at least (not tested further).
1143 # Revision 1.122 2002/10/11 06:03:08 hal9
1144 # Really install FAQ this time, and not u-m in two locations. Include images
1147 # Revision 1.120 2002/10/10 20:39:27 dessent
1150 # Fixes for Win32 GUI build (added "$(DIR_PRIVOXY_SRC)/" to dependencies list)
1152 # Revision 1.119 2002/09/23 03:42:41 hal9
1153 # This is higuita's make install/uninstall patch. Needs testing please!!!
1155 # Revision 1.118 2002/09/11 08:22:37 oes
1156 # Fixed path (C_HDRS are in src/ now)
1158 # Revision 1.117 2002/09/06 23:33:35 hal9
1159 # Fix clobber for config.h and config.h.in are in src now.
1161 # Revision 1.116 2002/09/06 05:22:57 hal9
1162 # Adapt make webserver target to 3.0 for pdf uploading.
1164 # Revision 1.115 2002/09/05 19:13:04 hal9
1165 # Migrate Karstens make snapshot stuff (not tested).
1167 # Revision 1.114 2002/09/05 11:58:30 oes
1168 # Synced in some changes fromm the stable branch:
1169 # From Revision 1.104.2.14 2002/08/10 11:19:37 oes:
1170 # - Add dependency: pcrs.o deps on config.h
1171 # Revision 1.104.2.9 2002/07/26 15:17:02 oes
1172 # - Added generation of default.action from defaul.action.master
1173 # - Deleted obsolete re_filterfile.txt generation
1175 # Revision 1.113 2002/07/30 21:50:25 hal9
1176 # Add redhat-test target, and migrate the RPM_PACKAGEV stuff from 3.0 branch.
1178 # Revision 1.112 2002/06/28 18:30:10 jongfoster
1179 # Fixing bugs compiling PCRE
1181 # Revision 1.111 2002/06/05 00:26:21 hal9
1182 # Move all doc build stuff to doc/source/GNUmakefile, leaving a 'make dok'
1183 # target only in toplevel. Add DOC_STATUS variable so docs can be built without
1184 # touching sgml source.
1186 # Revision 1.110 2002/06/04 14:51:48 jongfoster
1187 # Updating for new paths:
1188 # - Source files in src/
1189 # - Object files in obj/
1191 # Revision 1.109 2002/05/28 09:16:15 oes
1192 # Added comment for -notoc kludge
1194 # Revision 1.108 2002/05/28 03:56:08 hal9
1195 # make dok-index target for privoxy-index.html. Fix *bak dead soldiers in
1198 # Revision 1.107 2002/05/27 23:26:33 mal0rd
1199 # Made doc-generation configuration automatic.
1200 # References to DB2HTML were removed, not used.
1201 # --with-docbook now only needed if in odd path.
1203 # Revision 1.106 2002/05/26 04:55:11 mal0rd
1204 # Added debian-dist and debian-upload targets. Also documented usage.
1206 # Revision 1.105 2002/05/25 22:48:19 hal9
1207 # Add -notoc to README build (per oes's dsl magic).
1209 # Revision 1.104 2002/05/24 00:03:49 oes
1210 # Use p_doc.css for the Homepage for consistency
1212 # Revision 1.103 2002/05/23 23:19:00 oes
1213 # Use dsl without TOC for the homepage
1215 # Revision 1.102 2002/05/16 01:20:17 hal9
1216 # make announce target added.
1218 # Revision 1.101 2002/05/15 12:28:46 oes
1219 # Trying to keep Hal happy :)
1221 # Revision 1.100 2002/05/08 13:48:18 hal9
1222 # Ooops, that trashed JB v2.0.2 comment. Fixed.
1224 # Revision 1.99 2002/05/08 13:42:07 hal9
1225 # This fixes the numbering problem on index.html in contact info section (.1.). Using
1226 # perl, since its way too convoluted to try to fix proper with docbook.
1228 # Revision 1.98 2002/05/03 14:33:06 oes
1229 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
1231 # Revision 1.97 2002/04/27 20:27:43 swa
1232 # no longer needed due to new
1233 # PACKAGE_VERSION process
1235 # Revision 1.96 2002/04/27 17:44:32 morcego
1236 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
1237 # - Using the RM macro everywhere rm is called (either we use, or don't)
1240 # Revision 1.95 2002/04/27 15:37:25 swa
1241 # replacing directory in document creation process
1242 # no longer necessary.
1244 # Revision 1.94 2002/04/27 08:23:29 swa
1245 # pdf process reviewed and cleaned up
1247 # Revision 1.93 2002/04/27 04:55:53 morcego
1248 # privoxy-cl.spec now gets removed by clobber target
1250 # Revision 1.92 2002/04/27 04:53:40 morcego
1251 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
1254 # Revision 1.91 2002/04/27 04:44:51 morcego
1255 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
1256 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
1257 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
1259 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
1260 # for Conectiva Linux
1262 # Revision 1.90 2002/04/26 17:46:53 swa
1265 # Revision 1.89 2002/04/26 17:20:54 swa
1266 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1268 # Revision 1.88 2002/04/25 19:13:57 morcego
1269 # Removed RPM release number declaration on configure.in
1270 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1271 # targets (will produce an error, explaining who to do it, if no value
1274 # Revision 1.87 2002/04/23 14:10:59 swa
1275 # now create pdf documents
1277 # Revision 1.86 2002/04/15 04:30:27 hal9
1278 # Missed two -pi.bak's on perl/cygwin problem.
1280 # Revision 1.85 2002/04/14 01:05:34 hal9
1281 # Revert dok-webserver change for SF logo.
1283 # Revision 1.84 2002/04/13 22:43:25 hal9
1284 # -Fix dok-webserver for SF logo (more perl).
1285 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1287 # Revision 1.83 2002/04/12 09:39:25 oes
1288 # Excluding yet more files from tarball; making dist warning yet more scary
1290 # Revision 1.82 2002/04/11 21:07:11 oes
1291 # Excluding more files from tarball build
1293 # Revision 1.81 2002/04/11 14:40:27 oes
1294 # Fixed typo -- Thanks, Moritz!
1296 # Revision 1.80 2002/04/11 12:50:00 oes
1297 # Fixed tarball-dist target
1299 # Revision 1.79 2002/04/11 06:49:28 oes
1300 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1302 # Revision 1.78 2002/04/09 13:37:11 sarantis
1303 # fix tar options typo
1305 # Revision 1.77 2002/04/09 13:28:53 swa
1306 # build suse and gen-dist with html docs
1308 # Revision 1.76 2002/04/08 22:43:41 oes
1309 # Fix: Include dotfiles in fixing webserver permissions
1311 # Revision 1.75 2002/04/08 22:14:59 oes
1312 # Silencing tar warnings in the web* targets
1314 # Revision 1.74 2002/04/08 15:22:44 hal9
1315 # This has finishing touches for dok building. Should be ready to go.
1316 # -The main doc build is now 'make dok', should work on Redhat too.
1317 # -Removed man page from main doc build. It is built separately due to
1318 # perl scripts that most aren't likely to have.
1320 # Revision 1.73 2002/04/08 14:03:24 oes
1321 # oes for al: Fix install target
1323 # Revision 1.72 2002/04/08 13:42:11 oes
1324 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1326 # Revision 1.71 2002/04/07 20:32:03 hal9
1327 # -Add meta data kludge for make dok-webserver via $(PERL).
1328 # -Add subdirs for 'make dok-release'.
1330 # Revision 1.70 2002/04/07 08:59:40 swa
1331 # generated files. do NOT edit.
1332 # fixed directory bug in makefile.
1334 # Revision 1.69 2002/04/07 08:10:47 swa
1335 # create some of the webserver docs
1336 # automatically (in particular if
1337 # those docs recycle other documentation
1338 # fragments). Now committed webserver's
1341 # Revision 1.68 2002/04/07 07:58:11 swa
1342 # create some of the webserver docs
1343 # automatically (in particular if
1344 # those docs recycle other documentation
1347 # Revision 1.67 2002/04/07 05:31:42 hal9
1348 # Add 'dok-release' target:
1349 # -Set doc entities to VERSION and CODE_STATUS during make.
1350 # -Set doc conditional content flags (stable vs non-stable).
1351 # A separate target for the time being but needs to be incorporated into
1352 # dok build at some point.
1353 # -Filter out a spurious ^G from new man page > html converion in man2html.
1355 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1356 # Prettifying groff2html.
1357 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1358 # (The shell "if"s were hiding errors)
1359 # "perl" -> "$(PERL)"
1360 # Spaces->tabs in a couple of places.
1362 # Revision 1.65 2002/04/06 05:16:39 hal9
1363 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1364 # -Both of these will soon be generated files.
1366 # Revision 1.64 2002/04/04 22:14:51 oes
1367 # No longer rely on find honoring -iname
1369 # Revision 1.63 2002/04/04 21:06:22 swa
1372 # Revision 1.62 2002/04/04 20:49:50 swa
1373 # attempt to consolidate the
1374 # different dokbook versions.
1376 # Revision 1.61 2002/04/04 19:18:21 swa
1377 # readme was leftover directory. use w3m instead
1378 # of lynx to be consistent among developers. use
1379 # consistent target naming.
1381 # Revision 1.60 2002/04/04 12:25:41 oes
1382 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1384 # Revision 1.59 2002/04/04 08:32:45 swa
1385 # wrong name for tarball-dist target. further fixed content of tarball dist
1387 # Revision 1.58 2002/04/04 06:32:58 hal9
1388 # New dok targets for make readme.
1390 # Revision 1.57 2002/04/04 00:36:36 gliptak
1391 # always use pcre for matching
1393 # Revision 1.56 2002/04/03 22:28:03 gliptak
1394 # Removed references to gnu_regex
1396 # Revision 1.55 2002/04/03 19:54:29 swa
1397 # freebsd tested to work. attempt to move tarball dist target forward
1399 # Revision 1.54 2002/04/03 14:54:07 oes
1400 # Standard clean and clobber semantics II
1402 # Revision 1.53 2002/04/03 14:19:16 oes
1403 # Standard clean and clobber semantics
1405 # Revision 1.52 2002/04/03 02:56:18 hal9
1406 # Revert previous FAQ numbering kludge.
1408 # Revision 1.51 2002/04/02 13:03:56 oes
1409 # Added fix for webserver permissions
1411 # Revision 1.50 2002/04/02 03:46:24 hal9
1412 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1413 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1415 # Revision 1.49 2002/03/30 22:20:12 swa
1416 # cd didn't work. neither did find.
1418 # Revision 1.48 2002/03/30 19:04:06 swa
1419 # people release differently. no good.
1420 # I want to make parts of the docs only.
1422 # Revision 1.47 2002/03/30 09:05:21 swa
1423 # better packaging. better rpm building.
1424 # tar failed on sun (no exclude there).
1426 # Revision 1.46 2002/03/29 20:09:01 swa
1429 # Revision 1.45 2002/03/29 19:45:45 swa
1432 # Revision 1.44 2002/03/29 17:42:44 gliptak
1433 # Correcting for Solaris tar limitations
1435 # Revision 1.43 2002/03/29 07:40:03 swa
1436 # fixed make webserver. doh
1438 # Revision 1.42 2002/03/29 06:59:04 swa
1439 # other users could not modify files on webserver
1441 # Revision 1.41 2002/03/28 20:43:00 swa
1442 # set make correctly
1444 # Revision 1.40 2002/03/28 04:22:44 hal9
1445 # More on man2html stuff.
1447 # Revision 1.39 2002/03/28 01:04:14 hal9
1448 # More man2html stuff for docs.
1450 # Revision 1.38 2002/03/27 16:02:30 swa
1451 # have a generic target
1453 # Revision 1.37 2002/03/27 15:30:26 swa
1454 # have a consistent appearance
1456 # Revision 1.36 2002/03/27 14:58:08 swa
1457 # can be used by mutilple targets
1459 # Revision 1.35 2002/03/27 14:53:19 swa
1460 # added solaris-dist
1462 # Revision 1.34 2002/03/27 10:30:11 swa
1463 # we want a html man file on the webserver
1465 # Revision 1.33 2002/03/27 03:05:35 hal9
1466 # Added man2html target for docs (redhat-dok only for now)
1468 # Revision 1.32 2002/03/26 22:29:54 swa
1469 # we have a new homepage!
1471 # Revision 1.31 2002/03/26 14:00:18 swa
1472 # fixed make tarball, tarball-dist, tarball-clean
1474 # Revision 1.30 2002/03/25 12:52:25 swa
1477 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1480 # Revision 1.28 2002/03/24 16:19:48 swa
1481 # configure needs to be generated.
1483 # Revision 1.27 2002/03/24 16:13:57 swa
1484 # generated files are a nono in cvs
1486 # Revision 1.26 2002/03/24 15:36:02 swa
1489 # Revision 1.25 2002/03/24 14:31:08 swa
1490 # remove more crappy files. set RPM
1491 # release version correctly.
1493 # Revision 1.24 2002/03/24 14:19:55 swa
1494 # set rpm package release in configure.in. nowhere else.
1496 # Revision 1.23 2002/03/24 13:06:49 swa
1497 # suse-clean now runs fine
1499 # Revision 1.22 2002/03/24 12:56:21 swa
1500 # name change related issues.
1502 # Revision 1.21 2002/03/24 12:43:57 swa
1505 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1506 # Renaming config files
1508 # Revision 1.19 2002/03/22 20:53:03 morcego
1509 # - Ongoing process to change name to JunkbusterNG
1510 # - configure/configure.in: no change needed
1512 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1513 # - PROGRAM = jbng@EXEEXT@
1514 # - rh-spec now references as junkbusterng-rh.spec
1515 # - redhat-upload: references changed to junkbusterng-* (package names)
1516 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1517 # - tarball-src: now JunkbusterNG-*
1518 # - install: initscript now junkbusterng.init and junkbusterng (when
1520 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1521 # - junkbusterng.spec:
1522 # - References to the expression ijb where changed where possible
1523 # - New package name: junkbusterng (all in lower case, acording to
1524 # the LSB recomendation)
1525 # - Version changed to: 2.9.13
1527 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1528 # right. If it obsoletes, why conflict ? Have to check it later)
1529 # - Summary changed: Stefan, please check and aprove it
1530 # - Changes description to use the new name
1531 # - Sed string was NOT changed. Have to wait to the manpage to
1533 # - Keeping the user junkbuster for now. It will require some aditional
1534 # changes on the script (scheduled for the next specfile release)
1535 # - Added post entry to move the old logfile to the new log directory
1536 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1537 # added to the startup list).
1538 # - Added preun section to stop the service with the old name, as well
1539 # as remove it from the startup list
1540 # - Removed the chkconfig --del entry from the conditional block on
1541 # the preun scriptlet (now handled on the %files section)
1542 # - junkbuster.init: renamed to junkbusterng.init
1543 # - junkbusterng.init:
1544 # - Changed JB_BIN to jbng
1545 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1546 # be used where necessary (config dir)
1549 # - The config directory is /etc/junkbuster yet. Have to change it on the
1550 # specfile, after it is changes on the code
1551 # - The only files that got renamed on the cvs tree were the rh specfile and
1552 # the init file. Some file references got changes on the makefile and on the
1553 # rh-spec (as listed above)
1555 # Revision 1.18 2002/03/21 23:00:00 swa
1556 # want to autogenerate stuff.
1558 # Revision 1.17 2002/03/19 19:30:04 morcego
1559 # - Fixing stylesheet checking on configure. If it is found, no further checks
1562 # - configure will now check for db2html or docbook2html (should work now
1563 # on SuSe without the docbktls package)
1565 # Revision 1.16 2002/03/14 22:32:32 hal9
1566 # Bumped the RPM version.
1568 # Revision 1.15 2002/03/08 20:00:28 swa
1571 # Revision 1.14 2002/03/07 18:25:56 swa
1572 # synced redhat and suse build process
1574 # Revision 1.13 2002/03/07 17:17:56 oes
1575 # (Hopefully) fixed for older make versions
1577 # Revision 1.12 2002/03/07 15:28:27 swa
1580 # Revision 1.11 2002/03/06 14:33:18 sarantis
1581 # Use proper temp file, not "abc".
1583 # Revision 1.10 2002/03/06 14:19:35 sarantis
1584 # Cleanup PID_FILE_PATH from redhat-dist target
1586 # Revision 1.9 2002/03/05 17:31:11 morcego
1587 # Search for docbook.dsl. Should solve portability problems for SuSe.
1589 # Revision 1.8 2002/03/05 14:07:42 morcego
1590 # configure now detects rpm topdir, and change GNUmakefile acordingly
1591 # (based on sugestion by Sarantis Paskalis)
1593 # Revision 1.7 2002/03/05 13:43:28 morcego
1594 # Checking for text browser, so redhat-dok can work.
1596 # Revision 1.6 2002/03/05 13:10:51 morcego
1597 # Changes to implement redhat-dok (Hal Burgiss)
1598 # Changes to make it work on other distros and out-of-the-shelf configurations
1600 # Revision 1.5 2002/02/27 15:30:39 hal9
1601 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1603 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1604 # Adding urlmatch.[ch]
1606 # Revision 1.3 2002/01/04 15:26:08 oes
1607 # Added tarball-src target
1609 # Revision 1.2 2001/12/30 14:07:31 steudten
1610 # - Add signal handling (unix)
1611 # - Add SIGHUP handler (unix)
1612 # - Add creation of pidfile (unix)
1613 # - Add action 'top' in rc file (RH)
1614 # - Add entry 'SIGNALS' to manpage
1615 # - Add exit message to logfile (unix)
1617 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1618 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1619 # make break in a more obvious way.
1620 # Adding .PHONY section.
1622 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1623 # Renaming various config files
1624 # Fixing CR->CRLF under Win32 (I hope)
1626 # Revision 1.39 2001/11/06 12:07:30 steudten
1627 # Add --clean for building rpm in target redhat-dist.
1629 # Revision 1.38 2001/11/05 21:35:23 steudten
1630 # Complete rewrite for the 'redhat-dist' target.
1631 # Checks for writeable RPM build directories for calling user.
1632 # So you must not be root, just set the modes to 1777 to
1633 # build a RH package.
1634 # Fix the upload-target to be arch independant.
1635 # Add target for 'solaris-dist' - coming soon.
1637 # Revision 1.37 2001/11/01 00:52:04 hal9
1638 # Redhat-upload stuff per Stefan.
1640 # Revision 1.36 2001/10/31 19:26:13 swa
1641 # automate process of uploading new releases
1644 # Revision 1.35 2001/10/15 22:14:59 joergs
1645 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1646 # the general CFLAGS already.
1648 # Revision 1.34 2001/10/15 18:28:06 steudten
1649 # remove config.cache for target clobber.
1650 # Cleanup make dist for RH and S.u.S.E.
1652 # Revision 1.33 2001/10/10 12:43:33 oes
1653 # Added ugly hack to make install target work at least for some setups.
1655 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1656 # Correcting actionsfile filename for Win32 INI build
1658 # Revision 1.31 2001/09/23 10:13:48 swa
1659 # upload process established. run make webserver and
1660 # the documentation is moved to the webserver. documents
1661 # are now linked correctly.
1663 # Revision 1.30 2001/09/19 17:55:49 oes
1666 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1667 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1668 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1669 # of build problems.
1671 # Revision 1.28 2001/09/13 15:19:08 swa
1672 # we want text files as well.
1674 # Revision 1.27 2001/09/13 13:11:37 steudten
1676 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1678 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1679 # Mac OSX (Darwin) support added.
1681 # Revision 1.25 2001/09/12 22:55:45 joergs
1682 # AmigaOS support added.
1684 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1686 # OS/2 port: update autoconf'd support for the platform.
1688 # Revision 1.23 2001/09/12 16:28:42 swa
1689 # added "make dok" section to generate html pages from
1690 # the sgml source documents. note that the we do not want
1691 # generated stuff in cvs.
1693 # Revision 1.22 2001/09/10 16:31:23 swa
1694 # buildroot definition in the specfile fucks up the build
1695 # process under suse. hence I moved it to the "rpm -ta"
1698 # Revision 1.21 2001/09/10 11:12:49 oes
1701 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1702 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1704 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1705 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1707 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1708 # Major changes to build system in order to fix these bugs:
1709 # - pthreads under Linux was broken - changed -lpthread to -pthread
1710 # - Compiling in MinGW32 mode under CygWin now correctly detects
1711 # which shared libraries are available
1712 # - Solaris support (?) (Not tested under Solaris yet)
1714 # Revision 1.17 2001/07/28 16:44:54 oes
1715 # Fixed sed LF->CRLF conversion and removed deprecated files
1717 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1718 # Added support for linking with POSIX threads library
1720 # Revision 1.15 2001/07/13 13:48:07 oes
1721 # - Moved STATIC #define for pcre to (ac)config.h
1722 # - Made -Ipcre depandant on static pcre compilation to
1723 # avoid version conflicts
1724 # - Included compilation and depandancies for new deanimate.c
1725 # - Made changes to the pcre/pcreposix/pcrs build process
1726 # as required by the new library autodetection in
1729 # Revision 1.14 2001/07/01 16:27:44 oes
1730 # Fixed misplaced dependancy
1732 # Revision 1.13 2001/06/29 13:18:36 oes
1733 # - added depandancy of filters.o on cgi.h
1735 # Revision 1.12 2001/06/12 17:15:56 swa
1736 # fixes, because a clean build on rh6.1 was impossible.
1737 # GZIP confuses make, %configure confuses rpm, etc.
1739 # Revision 1.11 2001/06/11 11:26:35 sarantis
1740 # RPM version should be the same as ijbswa version. The rpm release is
1741 # specified in the specfile.
1743 # Revision 1.10 2001/06/07 17:27:45 swa
1744 # added suse build section
1746 # Revision 1.9 2001/06/04 18:31:58 swa
1747 # files are now prefixed with either `confdir' or `logdir'.
1748 # `make redhat-dist' replaces both entries confdir and logdir
1749 # with redhat values
1751 # Revision 1.8 2001/06/04 10:44:57 swa
1752 # `make redhatr-dist' now works. Except for the paths
1753 # in the config file.
1755 # Revision 1.7 2001/06/03 17:09:09 swa
1756 # swa for oes: reversed my earlier change
1758 # Revision 1.6 2001/06/03 17:07:27 swa
1761 # Revision 1.5 2001/06/03 13:57:26 swa
1762 # compile cgi.c (for andreas' GUI)
1764 # Revision 1.4 2001/05/31 21:18:45 jongfoster
1765 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
1767 # Revision 1.3 2001/05/29 20:02:48 joergs
1768 # Changes for AmigaOS added.
1770 # Revision 1.2 2001/05/17 22:23:23 oes
1771 # - Added auto-generation of CRLFs for Win32 config files
1772 # - Added comment-prefix to all Win32-only options in the config file
1773 # and provided auto stripping of this prefix for the Win32 platform by make
1775 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
1776 # Initial import of version 2.9.3 source tree